Commit Graph

272 Commits

Author SHA1 Message Date
Stefan Berger
60ae1c34ad bye to close(), welcome to VIR_(FORCE_)CLOSE()
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
2010-11-09 15:48:48 -05:00
Daniel P. Berrange
347d266c51 Ignore open failures when relabelling disk images
NFS in root squash mode may prevent opening disk images to
determine backing store. Ignore errors in this scenario.

* src/security/security_selinux.c: Ignore open failures on disk
  images
2010-11-02 14:38:23 +00:00
Daniel P. Berrange
93a18bbafa Treat failure to relabel stdin_path as non-fatal on NFS
NFS does not support file labelling, so ignore this error
for stdin_path when on NFS.

* src/security/security_selinux.c: Ignore failures on labelling
  stdin_path on NFS
* src/util/storage_file.c, src/util/storage_file.h: Refine
  virStorageFileIsSharedFS() to allow it to check for a
  specific FS type.
2010-11-02 14:38:19 +00:00
Daniel P. Berrange
e06772f006 Remove audit hooks from the selinux security driver code
This reverts commit b8e2de8899
The hooks will be re-added in the QEMU driver itself.

* src/security/security_selinux.c: Remove audit hooks
2010-10-27 17:03:21 +01:00
Miloslav Trmač
b8e2de8899 Audit SELinux label assignment.
A more natural auditing point would perhaps be
SELinuxSetSecurityProcessLabel, but this happens in the child after root
permissions are dropped, so the kernel would refuse the audit record.
2010-10-19 17:31:31 +01:00
Jamie Strandboge
593e0072eb implement usb and pci hot attach in AppArmor driver
Description: Implement AppArmorSetSecurityHostdevLabel() and
AppArmorRestoreSecurityHostdevLabel() for hostdev and pcidev attach.

virt-aa-helper also has to be adjusted because *FileIterate() is used for pci
and usb devices and the corresponding XML for hot attached hostdev and pcidev
is not in the XML passed to virt-aa-helper. The new '-F filename' option is
added to append a rule to the profile as opposed to the existing '-f
filename', which rewrites the libvirt-<uuid>.files file anew. This new '-F'
option will append a rule to an existing libvirt-<uuid>.files if it exists,
otherwise it acts the same as '-f'.

load_profile() and reload_profile() have been adjusted to add an 'append'
argument, which when true will use '-F' instead of '-f' when executing
virt-aa-helper.

All existing calls to load_profile() and reload_profile() have been adjusted
to use the old behavior (ie append==false) except AppArmorSetSavedStateLabel()
where it made sense to use the new behavior.

This patch also adds tests for '-F'.

Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/640993
2010-09-30 14:54:56 -06:00
Jamie Strandboge
2e5e614e6b app-armor: add 'rw' for appropriate devices
Description: Check for VIR_DOMAIN_CHR_TYPE in serial ports and add 'rw' for
defined serial ports, parallel ports and channels

Bug-Ubuntu: LP: #578527, LP: #609055
2010-09-23 11:22:44 -06:00
Jamie Strandboge
8e3eeb4e1d build: fix AppArmor compilation
* src/security/virt-aa-helper.c: Add missing include.
2010-08-16 11:39:33 -06:00
Matthias Bolte
d01340e796 virt-aa-helper: Make getopt accept the p option
Commit 68719c4bdd added the
p option to control disk format probing, but it wasn't added
to the getopt_long optstring parameter.

Add the p option to the getopt_long optstring parameter.
2010-07-24 17:15:11 +02:00
Matthias Bolte
adde0e2cf6 virt-aa-helper: Fix return value of add_file_path
Commit a885334499 added this
function and wrapped vah_add_file in it. vah_add_file may
return -1, 0, 1. It returns 1 in case the call to valid_path
detects a restricted file. The original code treated a return
value != 0 as error. The refactored code treats a return
value < 0 as error. This triggers segfault in virt-aa-helper
and breaks virt-aa-helper-test for the restricted file tests.

Make sure that add_file_path returns -1 on error.
2010-07-24 17:15:11 +02:00
Matthias Bolte
05c9a41336 virt-aa-helper: Ignore open errors again
virt-aa-helper used to ignore errors when opening files.
Commit a885334499 refactored
the related code and changed this behavior. virt-aa-helper
didn't ignore open errors anymore and virt-aa-helper-test
fails.

Make sure that virt-aa-helper ignores open errors again.
2010-07-24 17:15:11 +02:00
Daniel P. Berrange
68719c4bdd Disable all disk probing in QEMU driver & add config option to re-enable
Disk format probing is now disabled by default. A new config
option in /etc/qemu/qemu.conf will re-enable it for existing
deployments where this causes trouble
2010-07-19 18:25:13 +01:00
Daniel P. Berrange
f70e080962 Pass security driver object into all security driver callbacks
The implementation of security driver callbacks often needs
to access the security driver object. Currently only a handful
of callbacks include the driver object as a parameter. Later
patches require this is many more places.

* src/qemu/qemu_driver.c: Pass in the security driver object
  to all callbacks
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
  src/security/security_apparmor.c, src/security/security_driver.h,
  src/security/security_selinux.c: Add a virSecurityDriverPtr
  param to all security callbacks
2010-07-19 18:25:13 +01:00
Daniel P. Berrange
a885334499 Convert all disk backing store loops to shared helper API
Update the QEMU cgroups code, QEMU DAC security driver, SELinux
and AppArmour security drivers over to use the shared helper API
virDomainDiskDefForeachPath().

* src/qemu/qemu_driver.c, src/qemu/qemu_security_dac.c,
  src/security/security_selinux.c, src/security/virt-aa-helper.c:
  Convert over to use virDomainDiskDefForeachPath()
2010-07-19 18:25:13 +01:00
Daniel P. Berrange
bf80fc68ca Require format to be passed into virStorageFileGetMetadata
Require the disk image to be passed into virStorageFileGetMetadata.
If this is set to VIR_STORAGE_FILE_AUTO, then the format will be
resolved using probing. This makes it easier to control when
probing will be used

* src/qemu/qemu_driver.c, src/qemu/qemu_security_dac.c,
  src/security/security_selinux.c, src/security/virt-aa-helper.c:
  Set VIR_STORAGE_FILE_AUTO when calling virStorageFileGetMetadata.
* src/storage/storage_backend_fs.c: Probe for disk format before
  calling virStorageFileGetMetadata.
* src/util/storage_file.h, src/util/storage_file.c: Remove format
  from virStorageFileMeta struct & require it to be passed into
  method.
2010-07-19 18:25:04 +01:00
Laine Stump
590c9c9acf Set proper selinux label on image file during qemu domain restore
Also restore the label to its original value after qemu is finished
with the file.

Prior to this patch, qemu domain restore did not function properly if
selinux was set to enforce.
2010-06-28 11:55:32 -04:00
Daniel P. Berrange
2bad82f71e Set labelling for character devices in security drivers
When configuring serial, parallel, console or channel devices
with a file, dev or pipe backend type, it is necessary to label
the file path in the security drivers. For char devices of type
file, it is neccessary to pre-create (touch) the file if it does
not already exist since QEMU won't be allowed todo so itself.
dev/pipe configs already require the admin to pre-create before
starting the guest.

* src/qemu/qemu_security_dac.c: set file ownership for character
  devices
* src/security/security_selinux.c: Set file labeling for character
  devices
* src/qemu/qemu_driver.c: Add character devices to cgroup ACL
2010-06-25 14:39:54 +01:00
Daniel P. Berrange
f43dc26af7 Don't raise errors in the selinux restore code
The restore code is done in places where errors cannot be
raised, since they will overwrite over pre-existing errors.

* src/security/security_selinux.c: Only warn about failures
  in label restore, don't report errors
2010-06-08 15:21:07 +01:00
Daniel J Walsh
e72cc3c11d Add support for setting socket MLS level in SELinux driver
When SELinux is running in MLS mode, libvirtd will have a
different security level to the VMs. For libvirtd to be
able to connect to the monitor console, the client end of
the UNIX domain socket needs a different label. This adds
infrastructure to set the socket label via the security
driver framework

* src/qemu/qemu_driver.c: Call out to socket label APIs in
  security driver
* src/qemu/qemu_security_stacked.c: Wire up socket label
  drivers
* src/security/security_driver.h: Define security driver
  entry points for socket labelling
* src/security/security_selinux.c: Set socket label based on
  VM label
2010-06-08 15:14:57 +01:00
Jamie Strandboge
97b68a4943 Fix AppArmor save/restore.Add stdin_path to qemudStartVMDaemon() args.
Refactor to update AppArmor security driver to adjust profile for
save/restore. This addresses the following bugs:

 https://bugzilla.redhat.com/show_bug.cgi?id=529363
 https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/457716
2010-06-07 14:41:21 -04:00
Jamie Strandboge
2b57478ef0 Add stdin_path to qemudStartVMDaemon() args.
Adjust args to qemudStartVMDaemon() to also specify path to stdin_fd,
so this can be passed to the AppArmor driver via SetSecurityAllLabel().

This updates all calls to qemudStartVMDaemon() as well as setting up
the non-AppArmor security driver *SetSecurityAllLabel() declarations
for the above. This is required for the following
"apparmor-fix-save-restore" patch since AppArmor resolves the passed
file descriptor to the pathname given to open().
2010-06-07 14:41:09 -04:00
Jim Meyering
dcf30d9c25 initialize "meta" in virStorageFileGetMetadata, not in each caller
Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer.  Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
2010-05-19 17:07:08 +02:00
Jim Meyering
a986892e61 maint: add more free-like functions to the list and deal with fallout
* cfg.mk (useless_free_options): Add many vir*Free* function names,
and then remove the useless if-before-free tests exposed by running
make syntax-check.
* src/conf/interface_conf.c (virInterfaceDefFree): Remove useless "if".
(virInterfaceAssignDef): Likewise.
* src/conf/network_conf.c (virNetworkAssignDef): Likewise.
* src/conf/storage_conf.c (virStoragePoolObjAssignDef): Likewise.
* src/node_device/node_device_hal.c (dev_create): Likewise.
* src/security/virt-aa-helper.c (vahDeinit): Likewise.
* src/test/test_driver.c (testNodeDeviceCreateXML): Likewise.
* src/util/conf.c (virConfSetValue): Likewise.
2010-05-18 07:53:42 +02:00
Eric Blake
d533a98ed6 virFileResolveLink: fix return value
virFileResolveLink was returning a positive value on error,
thus confusing callers that assumed failure was < 0.  The
confusion is further evidenced by callers that would have
ended up calling virReportSystemError with a negative value
instead of a valid errno.

Fixes Red Hat BZ #591363.

* src/util/util.c (virFileResolveLink): Live up to documentation.
* src/qemu/qemu_security_dac.c
(qemuSecurityDACRestoreSecurityFileLabel): Adjust callers.
* src/security/security_selinux.c
(SELinuxRestoreSecurityFileLabel): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
2010-05-17 14:48:27 -06:00
Daniel P. Berrange
02ddaddfa8 Don't reset user/group/security label on shared filesystems during migrate
When QEMU runs with its disk on NFS, and as a non-root user, the
disk is chownd to that non-root user. When migration completes
the last step is shutting down the QEMU on the source host. THis
normally resets user/group/security label. This is bad when the
VM was just migrated because the file is still in use on the dest
host. It is thus neccessary to skip the reset step for any files
found to be on a shared filesystem

* src/libvirt_private.syms: Export virStorageFileIsSharedFS
* src/util/storage_file.c, src/util/storage_file.h: Add a new
  method virStorageFileIsSharedFS() to determine if a file is
  on a shared filesystem (NFS, GFS, OCFS2, etc)
* src/qemu/qemu_driver.c: Tell security driver not to reset
  disk labels on migration completion
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
  src/security/security_selinux.c, src/security/security_driver.h,
  src/security/security_apparmor.c: Add ability to skip disk
  restore step for files on shared filesystems.
2010-05-14 09:21:24 -04:00
Jiri Denemark
c90a1ad7d0 Report all errors in SELinuxRestoreSecurityFileLabel 2010-04-30 14:27:42 +02:00
Jamie Strandboge
1a253b38e2 Improve virt-aa-helper to handle SDL graphics and cleanups
* src/security/virt-aa-helper.c: add support for SDL devices and 3
  code cleanups
2010-04-06 23:01:23 +02:00
Jamie Strandboge
1efb623674 Adjust virt-aa-helper to handle pci devices
* src/security/virt-aa-helper.c: adjust virt-aa-helper to handle pci
  devices. Update valid_path() to have an override array to check against,
  and add "/sys/devices/pci" to it. Then rename file_iterate_cb() to
  file_iterate_hostdev_cb() and create file_iterate_pci_cb() based on it
2010-04-06 23:01:23 +02:00
Jamie Strandboge
2aca94bfd3 Add backingstore support to apparmor
adjust virt-aa-helper to handle backing store
* src/security/virt-aa-helper.c: look for backing store metadata
  for disk definitions.
2010-04-06 23:01:23 +02:00
Jamie Strandboge
a331b909c5 Add VIR_DOMAIN_XML_INACTIVE flag when parsing domain XML
To avoid an error when hitting the <seclabel...> definition
* src/security/virt-aa-helper.c: add VIR_DOMAIN_XML_INACTIVE flag
  to virDomainDefParseString
2010-04-06 23:01:23 +02:00
Jamie Strandboge
ba32e11d41 virt-aa-helper should not fail if profile was removed
Don't exit with error if the user unloaded the profile outside of
 libvirt
* src/security/virt-aa-helper.c: check the exit error from apparmor_parser
  before exiting with a failure
2010-04-06 23:01:23 +02:00
Jamie Strandboge
e68792c112 Do nor clear caps when invoking virt-aa-helper
The calls to virExec() in security_apparmor.c when
invoking virt-aa-helper use VIR_EXEC_CLEAR_CAPS. When compiled without
libcap-ng, this is not a problem (it's effectively a no-op) but with
libcap-ng this causes MAC_ADMIN to be cleared. MAC_ADMIN is needed by
virt-aa-helper to manipulate apparmor profiles and without it VMs will
not start[1]. This patch calls virExec with the default VIR_EXEC_NONE
instead.
* src/security/security_apparmor.c: fallback to VIR_EXEC_NONE flags for
  virExec of virt_aa_helper
2010-04-06 23:01:23 +02:00
Matthias Bolte
d2e0bd1779 Fix compiler warning about non-literal format string 2010-04-06 01:38:53 +02:00
Laine Stump
8a7b4be5ab Allow domain disk images on root-squash NFS to coexist with security driver.
(suggested by Daniel Berrange, tested by Dan Kenigsberg)

virStorageFileGetMetadata will fail for disk images that are stored on
a root-squash NFS share that isn't world-readable.
SELinuxSetSecurityImageLabel is called during the startup of every
domain (as long as security_driver != "none"), and it will propogate
the error from virStorageFileGetMetadata, causing the domain startup
to fail. This is, however, a common scenario when qemu is run as a
non-root user and the disk image is stored on NFS.

Ignoring this failure (which doesn't matter in this case, since the
next thing done by SELinuxSetSecurityImageLabel - setting the file
context - will also fail (and that function already ignores failures
due to root-squash NFS) will allow us to continue bringing up the
domain. The result is that we don't need to disable the entire
security driver just because a domain's disk image is stored on
root-squashed NFS.
2010-04-02 09:39:20 -04:00
Cole Robinson
65e97240e6 security: selinux: Fix crash when releasing non-existent label
This can be triggered by the qemuStartVMDaemon cleanup path if a
VM references a non-existent USB device (by product) in the XML.
2010-03-22 10:45:36 -04:00
Cole Robinson
3f1aa08af6 security: Set permissions for kernel/initrd
Fixes URL installs when running virt-install as root on Fedora.
2010-03-15 12:36:50 -04:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Eric Blake
2e56fb2bcc build: consistently use C99 varargs macros
Prior to this patch, there was an inconsistent mix between GNU and C99.

For consistency, and potential portability to other compilers, stick
with the C99 vararg macro syntax.

* src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/conf/domain_conf.c (virDomainReportError): Likewise.
* src/conf/domain_event.c (eventReportError): Likewise.
* src/conf/interface_conf.c (virInterfaceReportError): Likewise.
* src/conf/network_conf.c (virNetworkReportError): Likewise.
* src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise.
* src/conf/secret_conf.h (virSecretReportError): Likewise.
* src/conf/storage_conf.h (virStorageReportError): Likewise.
* src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than
  GNU vararg macro syntax.
* src/esx/esx_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_interface_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_network_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_secret_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_storage_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_util.c (ESX_ERROR): Likewise.
* src/esx/esx_vi.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vmx.c (ESX_ERROR): Likewise.
* src/util/hostusb.c (usbReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/util/json.c (virJSONError): Likewise.
* src/util/macvtap.c (ReportError): Likewise.
* src/util/pci.c (pciReportError): Likewise.
* src/util/stats_linux.c (virStatsError): Likewise.
* src/util/util.c (virUtilError): Likewise.
* src/util/xml.c (virXMLError): Likewise.
* src/xen/proxy_internal.c (virProxyError): Use C99 rather than
  GNU vararg macro syntax.
* src/xen/sexpr.c (virSexprError): Likewise.
* src/xen/xen_driver.c (xenUnifiedError): Likewise.
* src/xen/xen_hypervisor.c (virXenError): Likewise.
* src/xen/xen_inotify.c (virXenInotifyError): Likewise.
* src/xen/xend_internal.c (virXendError): Likewise.
* src/xen/xm_internal.c (xenXMError): Likewise.
* src/xen/xs_internal.c (virXenStoreError): Likewise.
* src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/datatypes.c (virLibConnError): Likewise.
* src/interface/netcf_driver.c (interfaceReportError): Likewise.
* src/libvirt.c (virLibStreamError): Likewise.
* src/lxc/lxc_conf.h (lxcError): Likewise.
* src/network/bridge_driver.c (networkReportError): Likewise.
* src/nodeinfo.c (nodeReportError): Likewise.
* src/opennebula/one_conf.h (oneError): Likewise.
* src/openvz/openvz_conf.h (openvzError): Likewise.
* src/phyp/phyp_driver.c (PHYP_ERROR): Likewise.
* src/qemu/qemu_conf.h (qemuReportError): Likewise.
* src/remote/remote_driver.c (errorf): Likewise.
* src/security/security_driver.h (virSecurityReportError): Likewise.
* src/test/test_driver.c (testError): Likewise.
* src/uml/uml_conf.h (umlReportError): Likewise.
* src/vbox/vbox_driver.c (vboxError): Likewise.
* src/vbox/vbox_tmpl.c (vboxError): Likewise.
2010-03-08 13:32:27 +01:00
Daniel P. Berrange
09ed07293f Fix USB passthrough based on product/vendor
Changeset

  commit 5073aa994a
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Mon Jan 11 11:40:46 2010 -0500

Added support for product/vendor based passthrough, but it only
worked at the security driver layer. The main guest XML config
was not updated with the resolved bus/device ID. When the QEMU
argv refactoring removed use of product/vendor, this then broke
launching guests.

THe solution is to move the product/vendor resolution up a layer
into the QEMU driver. So the first thing QEMU does is resolve
the product/vendor to a bus/device and updates the XML config
with this info. The rest of the code, including security drivers
and QEMU argv generated can now rely on bus/device always being
set.

* src/util/hostusb.c, src/util/hostusb.h: Split vendor/product
  resolution code out of usbGetDevice and into usbFindDevice.
  Add accessors for bus/device ID
* src/security/virt-aa-helper.c, src/security/security_selinux.c,
  src/qemu/qemu_security_dac.c: Remove vendor/product from the
  usbGetDevice() calls
* src/qemu/qemu_driver.c: Use usbFindDevice to resolve vendor/product
  into a bus/device ID
2010-03-05 15:05:14 +00:00
Matthias Bolte
cad2a4caed Convert virSecurityReportError into a macro
The virRaiseError macro inside of virSecurityReportError expands to
virRaiseErrorFull and includes the __FILE__, __FUNCTION__ and __LINE__
information. But this three values are always the same for every call
to virSecurityReportError and do not reflect the actual error context.

Converting virSecurityReportError into a macro results in getting the
correct __FILE__, __FUNCTION__ and __LINE__ information.
2010-02-15 10:45:25 +01:00
Matthias Bolte
af7c18f7a2 Fix compliation of AppArmor related code
Broken by the latest commits to remove the virConnectPtr parameter
from internal functions.
2010-02-12 00:09:59 +01:00
Daniel P. Berrange
ce71b8654d Remove virConnectPtr from USB/PCI device iterators
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions

* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
  from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
  pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
  to drop redundant virConnectPtr arg
2010-02-10 13:29:57 +00:00
Daniel P. Berrange
d6126f764f Remove use of virConnectPtr from security driver APIs
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match
2010-02-10 11:49:24 +00:00
Matthias Bolte
314ced3951 Remove conn parameter from USB functions
It was used for error reporting only.
2010-02-09 01:04:55 +01:00
Matthias Bolte
9140756d30 Remove conn parameter from PCI functions
It was used for error reporting only.
2010-02-09 01:04:55 +01:00
Matthias Bolte
fe46a7e686 Remove conn parameter from storage file functions
It was used for error reporting only.
2010-02-09 01:04:55 +01:00
Matthias Bolte
f972dc2d5c Remove conn parameter from util functions
It was used for error reporting only.
2010-02-09 01:04:54 +01:00
Matthias Bolte
d5c6183def Remove conn parameter from virXPath* functions
It was used for error reporting only.
2010-02-09 01:04:54 +01:00
Matthias Bolte
a5ab900d26 Remove conn parameter from virReportSystemError 2010-02-09 01:04:54 +01:00
Matthias Bolte
8ce5e2c1ab Remove conn parameter from virReportOOMError 2010-02-09 01:04:54 +01:00
Chris Lalancette
b195f20f18 Use virFileResolveLink instead of readlink in AppArmor
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-01-22 09:38:22 -05:00
Jamie Strandboge
e09086b074 Remove AppArmor compile warnings
* src/security/security_apparmor.c: unused variable in
  AppArmorSetSecurityAllLabel and unused parameter in
  AppArmorReleaseSecurityLabel
2010-01-22 10:48:34 +01:00
Daniel P. Berrange
0c0e0d0263 Refactor setup & cleanup of security labels in security driver
The current security driver architecture has the following
split of logic

 * domainGenSecurityLabel

    Allocate the unique label for the domain about to be started

 * domainGetSecurityLabel

    Retrieve the current live security label for a process

 * domainSetSecurityLabel

    Apply the previously allocated label to the current process
    Setup all disk image / device labelling

 * domainRestoreSecurityLabel

    Restore the original disk image / device labelling.
    Release the unique label for the domain

The 'domainSetSecurityLabel' method is special because it runs
in the context of the child process between the fork + exec.

This is require in order to set the process label. It is not
required in order to label disks/devices though. Having the
disk labelling code run in the child process limits what it
can do.

In particularly libvirtd would like to remember the current
disk image label, and only change shared image labels for the
first VM to start. This requires use & update of global state
in the libvirtd daemon, and thus cannot run in the child
process context.

The solution is to split domainSetSecurityLabel into two parts,
one applies process label, and the other handles disk image
labelling. At the same time domainRestoreSecurityLabel is
similarly split, just so that it matches the style. Thus the
previous 4 methods are replaced by the following 6 new methods

 * domainGenSecurityLabel

    Allocate the unique label for the domain about to be started
    No actual change here.

 * domainReleaseSecurityLabel

   Release the unique label for the domain

 * domainGetSecurityProcessLabel

   Retrieve the current live security label for a process
   Merely renamed for clarity.

 * domainSetSecurityProcessLabel

   Apply the previously allocated label to the current process

 * domainRestoreSecurityAllLabel

    Restore the original disk image / device labelling.

 * domainSetSecurityAllLabel

    Setup all disk image / device labelling

The SELinux and AppArmour drivers are then updated to comply with
this new spec. Notice that the AppArmour driver was actually a
little different. It was creating its profile for the disk image
and device labels in the 'domainGenSecurityLabel' method, where as
the SELinux driver did it in 'domainSetSecurityLabel'. With the
new method split, we can have consistency, with both drivers doing
that in the domainSetSecurityAllLabel method.

NB, the AppArmour changes here haven't been compiled so may not
build.
2010-01-21 14:00:16 +00:00
Daniel P. Berrange
81fbb4cb23 Make security drivers responsible for checking dynamic vs static labelling
The QEMU driver is doing 90% of the calls to check for static vs
dynamic labelling. Except it is forgetting todo so in many places,
in particular hotplug is mistakenly assigning disk labels. Move
all this logic into the security drivers themselves, so the HV
drivers don't have to think about it.

* src/security/security_driver.h: Add virDomainObjPtr parameter
  to virSecurityDomainRestoreHostdevLabel and to
  virSecurityDomainRestoreSavedStateLabel
* src/security/security_selinux.c, src/security/security_apparmor.c:
  Add explicit checks for VIR_DOMAIN_SECLABEL_STATIC and skip all
  chcon() code in those cases
* src/qemu/qemu_driver.c: Remove all checks for VIR_DOMAIN_SECLABEL_STATIC
  or VIR_DOMAIN_SECLABEL_DYNAMIC. Add missing checks for possibly NULL
  driver entry points.
2010-01-21 14:00:16 +00:00
Matthias Bolte
cfe49446d3 Fix compilation of virt-aa-helper.c
Commit 5073aa994a added an additional
'}' to a case block that messed up the block structure of the get_files
function.
2010-01-15 12:06:03 +01:00
Cole Robinson
5073aa994a Implement path lookup for USB by vendor:product
Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.

This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)

[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450
2010-01-13 15:24:41 -05:00
Matthias Bolte
1b9d074493 Add virBufferFreeAndReset() and replace free()
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
2009-12-10 00:00:50 +01:00
Daniel P. Berrange
e7c78b0a94 Support QEMU's virtual FAT block device driver
Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks
2009-11-23 12:17:16 +00:00
Jamie Strandboge
3cbc05012d AppArmor code cleanups
* src/security/security_apparmor.c: a few code cleanups following a
  review on the list
2009-11-13 15:32:55 +01:00
Jamie Strandboge
d0d4b8ad76 AppArmor handling of accesses to readonly files
Fixes https://launchpad.net/bugs/453335

* src/security/virt-aa-helper.c: suppress confusing and misleading
  apparmor denied message when kvm/qemu tries to open a libvirt specified
  readonly file (such as a cdrom) with write permissions. libvirt uses
  the readonly attribute for the security driver only, and has no way
  of telling kvm/qemu that the device should be opened readonly
2009-11-13 15:32:55 +01:00
Jamie Strandboge
dae7054b76 AppArmor require absolute paths
Fixes https://launchpad.net/bugs/460271

* src/security/virt-aa-helper.c: require absolute path for dynamic added
  files. This is required by AppArmor and conveniently prevents adding
  tcp consoles to the profile
2009-11-13 15:32:55 +01:00
Jamie Strandboge
308b85330a Fix virt-aa-helper when host and os.type arch differ
* src/security/virt-aa-helper.c: get_definition() now calls the new
  caps_mockup() function which will parse the XML for os.type,
  os.type.arch and then sets the wordsize.  These attributes are needed
  only to get a valid virCapsPtr for virDomainDefParseString(). The -H
  and -b options are now removed from virt-aa-helper (they weren't used
  yet anyway).
* tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755
2009-11-13 11:04:23 +01:00
Daniel P. Berrange
bc0010b3d1 Fix save and restore with non-privileged guests and SELinux
When running qemu:///system instance, libvirtd runs as root,
but QEMU may optionally be configured to run non-root. When
then saving a guest to a state file, the file is initially
created as root, and thus QEMU cannot write to it. It is also
missing labelling required to allow access via SELinux.

* src/qemu/qemu_driver.c: Set ownership on save image before
  running migrate command in virDomainSave impl. Call out to
  security driver to set save image labelling
* src/security/security_driver.h: Add driver APIs for setting
  and restoring saved state file labelling
* src/security/security_selinux.c: Implement saved state file
  labelling for SELinux
2009-11-11 15:24:32 +00:00
Matthias Bolte
790f0b3057 Add missing OOM error checks, reports and cleanups 2009-11-09 23:17:45 +01:00
Cole Robinson
4c44cdcce3 Various error reporting fixes
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
2009-11-03 16:46:54 -05:00
Daniel P. Berrange
46992453b9 Annotate many methods with ATTRIBUTE_RETURN_CHECK & fix problems
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this

* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
  and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
  that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
  return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
  if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
2009-11-02 11:09:03 -05:00
Jamie Strandboge
bbaecd6a8f sVirt AppArmor security driver
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
  src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
  the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
  tests for virt-aa-helper and the security driver, secaatest.c is
  identical to seclabeltest.c except it initializes the 'apparmor'
  driver instead of 'selinux'
2009-10-08 16:34:22 +02:00
Jamie Strandboge
709c37e932 Add a domain argument to SVirt *RestoreImageLabel
When James Morris originally submitted his sVirt patches (as seen in
libvirt 0.6.1), he did not require on disk labelling for
virSecurityDomainRestoreImageLabel. A later commit[2] changed this
behavior to assume on disk labelling, which halts implementations for
path-based MAC systems such as AppArmor and TOMOYO where
vm->def->seclabel is required to obtain the label.

* src/security/security_driver.h src/qemu/qemu_driver.c
  src/security/security_selinux.c: adds the 'virDomainObjPtr vm'
  argument back to *RestoreImageLabel
2009-10-07 12:40:01 +02:00
Mark McLoughlin
1daea0c59d Fix USB device re-labelling
A simple misplaced break out of a switch results in:

  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
  libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.

when trying to passthrough a USB host device to qemu.

* src/security_selinux.c: fix a switch/break thinko
2009-10-01 11:56:09 +01:00
Chris Lalancette
47c8709564 Fix up a few typos in the tree.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-30 14:05:24 +02:00
Mark McLoughlin
fe627697a3 Re-label image file backing stores
Use virStorageFileGetMetadata() to find any backing stores for images
and re-label them

Without this, qemu cannot access qcow2 backing files, see:

  https://bugzilla.redhat.com/497131

* src/security/security_selinux.c: re-label backing store files in
  SELinuxSetSecurityImageLabel()
2009-09-30 10:37:00 +01:00
Daniel P. Berrange
e56c6a83b4 Move security drivers to src/security/
* src/Makefile.am, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/seclabeltest.c: Adapt for changed paths
* src/security.c: Rename to src/security/security_driver.c
* src/security.h: Rename to src/security/security_driver.h
* src/security_selinux.c, src/security_selinux.h: Move to src/security/
2009-09-21 14:41:44 +01:00