This rule wouldn't be able to find any case of a hardcoded indent that
was in the middle of a string, but then virBuffer doesn't add
indentation in the middle of a string either.
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is (n * (n + 1) ) / 2. This gets very large, very
quickly.
This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.
The simple usage is
$ VIR_TEST_OOM=1 ./qemuxml2argvtest
...
29) QEMU XML-2-ARGV clock-utc ... OK
Test OOM for nalloc=36 .................................... OK
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 .................................... OK
31) QEMU XML-2-ARGV clock-france ... OK
Test OOM for nalloc=38 ...................................... OK
...
the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.
If it crashes, then running under valgrind will often show the problem
$ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When debugging problems it is also helpful to select an individual
test case
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest
In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.
$ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 !virAllocN
/home/berrange/src/virt/libvirt/src/util/viralloc.c:180
virHashCreateFull
/home/berrange/src/virt/libvirt/src/util/virhash.c:144
virDomainDefParseXML
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
virDomainDefParseNode
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
virDomainDefParse
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
testCompareXMLToArgvFiles
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
virtTestRun
/home/berrange/src/virt/libvirt/tests/testutils.c:250
mymain
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
virtTestMain
/home/berrange/src/virt/libvirt/tests/testutils.c:750
??
??:0
_start
??:?
FAILED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the new storage driver APIs to delete snapshot backing files in case
of failure instead of directly relying on "unlink". This will help us in
the future when we will be adding network based storage without local
representation in the host.
Introduce Wireshark dissector plugin which adds support to Wireshark
for dissecting libvirt RPC protocol.
Added following files to build Wireshark dissector from libvirt source
tree.
* tools/wireshark/*: Source tree of Wireshark dissector plugin.
Added followings to configure.ac or Makefile.am.
configure.ac
* --with-wireshark-dissector: Enable support for building Wireshark
dissector.
* --with-ws-plugindir: Specify wireshark plugin directory that dissector
will installed.
* Added tools/wireshark/{Makefile,src/Makefile} to AC_CONFIG_FILES.
Makefile.am
* Added tools/wireshark/ to SUBDIR.
Finish the cleanup of libvirt.c; all uses of virLib*Error have
now been converted to more canonical conventions.
* src/libvirt.c: Use virReportError in remaining errors.
(virLibConnError, virLibDomainError): Delete unused macros.
* cfg.mk (msg_gen_function): Drop unused names.
Signed-off-by: Eric Blake <eblake@redhat.com>
This partially reverts 5eb4b04211 and 62774afb6b.
Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The domain events demo program isn't really tied to domain
events anymore, so rename it to object events.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Kill the use of atoi() and introduce syntax check to forbid it and it's
friends (atol, atoll, atof, atoq).
Also fix a typo in variable name holding the cylinders count of a disk
pool (apparently unused).
examples/domsuspend/suspend.c will need a larger scale refactor as the
whole example file is broken thus it will be exempted from the syntax
check for now.
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This addition, however, requires some refactoring to be done. First of
all, to match the best practice we should detach the device prior
resetting it. That's why testVirPCIDeviceDetach is detaching all devices
within 0000:00:01.0 and 0000:00:03.0 range. Then, the brand new test
will reset the 0000:00:02.0 device, so the last testVirPCIDeviceReattach
can reattach all the devices back.
In order to perform a PCI device reset, the dummy config file is not
sufficient anymore and must be replaced with real PCI config (binary
mess). Such config files are to be stored under tests/virpcitestdata/
and ought to have '.config' suffix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This commit introduces yet another test under virpcitest:
virPCIDeviceDetach. However, in order to be able to do this, the
virpcimock needs to be extended to model the kernel behavior on PCI
device binding and unbinding (create 'driver' symlinks under the device
tree, check for device ID in driver's ID table, etc.)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Among with this test introduce virpcimock as we need to mock some
syscalls, e.g. redirect open() of a file under /sys/bus/pci to a
stub sysfs tree.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To make it easier to forbid future attempts at a confusing typedef
name ending in Ptr that isn't actually a pointer, insist that we
follow our preferred style of 'typedef foo *fooPtr'.
* cfg.mk (sc_forbid_const_pointer_typedef): Enforce consistent
style, to prevent issue fixed in previous storage patch.
* src/conf/capabilities.h (virCapsPtr): Fix offender.
* src/security/security_stack.c (virSecurityStackItemPtr):
Likewise.
* tests/qemucapabilitiestest.c (testQemuDataPtr): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
On RHEL 5, make syntax-check was failing because even strings like
'int isTempChain' matched the 'int i' rule. To be honest, I haven't
found the root cause, but the change added makes it work as expected
and keeps the proper behavior on newer systems as well.
The use of getenv is typically insecure, and we want people
to use our wrappers, to force them to think about setuid
needs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Now that the code base has been cleaned, enforce it with a syntax
checker.
* cfg.mk (sc_forbid_const_pointer_typedef): New rule.
Signed-off-by: Eric Blake <eblake@redhat.com>
Start a test case for the virNetServerClient object, which
initially checks the creation of a virIdentityPtr object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have been adding new .x files without keeping the list of
*-structs files up-to-date. This adds the support for the
recent additions.
In the process of testing this, I also noticed that Fedora 19's
use of dwarves-1.10 (providing pdwtags version 1.9) was producing
a single line on stderr but still giving enough useful info on
stdout that we could check structs; the real goal of checking
stderr separately from stdout was to avoid the bug in dwarves-1.9
where stdout was empty (see bug http://bugzilla.redhat.com/772358).
* src/Makefile.am (struct_prefix, PROTOCOL_STRUCTS): Add missing
struct tests.
(PDWTAGS): Work with Fedora 19 pdwtags.
(lxc_monitor_protocol-struct, lock_protocol-struct): New rules.
* src/lxc_monitor_protocol-structs: New file.
* src/lock_protocol-structs): Likewise.
* cfg.mk (generated_files): Enlarge list.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The use of <> is a security issue for RPC parameters, since a
malicious client can set a huge array length causing arbitrary
memory allocation in the daemon.
It is also a robustness issue for RPC return values, because if
the stream is corrupted, it can cause the client to also allocate
arbitrary memory.
Use a syntax-check rule to prohibit any use of <>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virnettlscontexttest.c tests both virNetTLSContext
and virNetTLSSession functionality. Split into two
separate tests, to make the code size more manageable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 3d0e3c1 reintroduced a problem previously squelched in
commit 7e5aa78. Add a syntax check this time around.
util/virutil.c: In function 'virGetGroupList':
util/virutil.c:1015: error: 'for' loop initial declaration used outside C99 mode
* cfg.mk (sc_prohibit_loop_var_decl): New rule.
* src/util/virutil.c (virGetGroupList): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Long lines are harder to read and harder to diff; in fact, if lines get
too long (> 1000 bytes), it starts causing issues where git send-email
refuses to send patches for the file. I've cleaned up the tests
directory in the past (see commits bd6c46f, 3b750d1), but new long
lines have been introduced in the meantime.
Why 90 instead of 80? Because there were too many tests on the fringe
edge, and I didn't want to edit that many files.
Add a syntax check to prevent future long lines.
* cfg.mk (sc_prohibit_long_lines): New rule.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any
file with content longer than 90 columns.
* tests/storagevolxml2argvdata/*.argv: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add two syntax-check rules
- sc_prohibit_int_ijk - block use of 'int' as a data type
for any variables named 'i', 'j', 'k'
- sc_prohibit_int_iijjkk - block use of 'ii', 'jj', 'kk'
for any variable names
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
Based on a report by Chandrashekar Shastri, at
https://bugzilla.redhat.com/show_bug.cgi?id=979360
On systems where git cannot access the outside world, a developer
can instead arrange to get a copy of gnulib at the right commit
via side channels (such as NFS share drives), set GNULIB_SRCDIR,
then use ./autogen.sh --no-git. In this setup, we will now
avoid direct use of git. Of course, this means no automatic
gnulib updates when libvirt.git updates its submodule, but it
is expected that any developer in such a situation is already
prepared to deal with the fallout.
* .gnulib: Update to latest, for bootstrap.
* bootstrap: Synchronize from gnulib.
* autogen.sh (no_git): Avoid git when requested.
* cfg.mk (_update_required): Skip automatic rerun of bootstrap if
we can't use git.
* docs/compiling.html.in: Document this setup.
* docs/hacking.html.in: Mention this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Osier Yang pointed out that I introduced a syntax error in my
syntax check (I really shouldn't make last-minute changes without
testing them....).
/bin/sh: -c: line 2: syntax error near unexpected token `;'
/bin/sh: -c: line 2: ` { echo 'maint.mk: incorrect whitespace, see HACKING for rules' 2>&; \'
make: *** [bracket-spacing-check] Error 1
* cfg.mk (bracket-spacing-check): Fix copy-and-paste error.
Signed-off-by: Eric Blake <eblake@redhat.com>
To ensure we don't regress and cause the need for further
cleanups, add a 'make syntax-check' rule that ensures new
files have proper copyright contents.
* cfg.mk (sc_copyright_address): Rename...
(sc_copyright_usage): ...and enhance.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html states:
You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.
If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.
* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use of the select() system call is inherantly dangerous since
applications will hit a buffer overrun if any FD number exceeds
the size of the select set size (typically 1024). Replace the
two uses of select() with poll() and use cfg.mk to ban any
future use of select().
NB: This changes the phyp driver so that it uses an infinite
timeout, instead of busy-waiting for 1ms at a time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
Directories python/tools/examples should include them in <> form,
though this patch allows "" form in these directories by excluding
them, a later patch will do the cleanup.
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.
Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We've already scrubbed for comparisons of 'uid_t == -1' (which fail
on platforms where uid_t is a u16), but another one snuck in.
* src/util/virutil.c (virSetUIDGIDWithCaps): Correct uid comparison.
* cfg.mk (sc_prohibit_risky_id_promotion): New rule.
testutils.c likes to print summaries after a test completes,
including if it failed. But if the test outright exit()s,
this summary is skipped. Enforce that we return instead of exit.
* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.
hacking: Add some text around the running of Valgrind along with example
output for "real" vs. "false positives".
cfg.mk: Add hacking.in.html to sc_prohibit_raw_allocation
Adjust the macros to free memory allocated during various calls to
perform the check if parameter is NULL prior to really freeing and to
set the pointer to NULL after done freeing.
Nested conditionals are hard to read if they are not indented.
We can't add arbitrary whitespace to everything in spec files,
but we CAN add spaces before %if and %define. Use this trick,
plus a fancy sed script that rewrites a spec file into a C
file, so we can use cppi to keep our spec file nice.
For reference, the sed script converts code like:
|# RHEL-5 builds are client-only for s390, ppc
|%if 0%{?rhel} == 5
| %ifnarch %{ix86} x86_64 ia64
| %define client_only 1
| %endif
|%endif
into the following for cppi:
|// # RHEL-5 builds are client-only for s390, ppc
|#if a // 0%{?rhel} == 5
|# if a // %{ix86} x86_64 ia64
|# define client_only 1
|# endif
|#endif
and errors from 'make syntax-check' look like:
spec_indentation
cppi: mingw-libvirt.spec.in: line 130: not properly indented
maint.mk: incorrect preprocessor indentation
* libvirt.spec.in: Add some indentation to make it easier to follow
various conditionals.
* mingw-libvirt-spec.in: Likewise.
* cfg.mk (sc_spec_indentation): New syntax check to enforce it.
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Test cases for virSysinfoRead. Initially, there are tests for
x86 (DMI based) and s390 (/proc/... based).
In lack of PPC data, I have stubbed out the test for it, but it
can be added with a minimal effort.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The virtlockd daemon will be responsible for managing locks
on virtual machines. Communication will be via the standard
RPC infrastructure. This provides the XDR protocol definition
* src/locking/lock_protocol.x: Wire protocol for virtlockd
* src/Makefile.am: Include lock_protocol.[ch] in virtlockd
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate
- Avoid risk of other libvirtd threads accidentally
releasing fcntl() locks by opening + closing a file
that is locked
- Ensure locks can be preserved across libvirtd restarts.
virtlockd will need to be able to re-exec itself while
maintaining locks. This is simpler to achieve if its
sole job is maintaining locks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I noticed when writing the backend functions for virNetworkUpdate that
I was repeating the same sequence of memmove, VIR_REALLOC, nXXX-- (and
messed up the args to memmove at least once), and had seen the same
sequence in a lot of other places, so I decided to write a few
utility functions/macros - see the .h file for full documentation.
The intent is to reduce the number of lines of code, but more
importantly to eliminate the need to check the element size and
element count arithmetic every time we need to do this (I *always*
make at least one mistake.)
VIR_INSERT_ELEMENT: insert one element at an arbitrary index within an
array of objects. The size of each object is determined
automatically by the macro using sizeof(*array). The new element's
contents are copied into the inserted space, then the original copy
of contents are 0'ed out (if everything else was
successful). Compile-time assignment and size compatibility between
the array and the new element is guaranteed (see explanation below
[*])
VIR_INSERT_ELEMENT_COPY: identical to VIR_INSERT_ELEMENT, except that
the original contents of newelem are not cleared to 0 (i.e. a copy
is made).
VIR_APPEND_ELEMENT: This is just a special case of VIR_INSERT_ELEMENT
that "inserts" one past the current last element.
VIR_APPEND_ELEMENT_COPY: identical to VIR_APPEND_ELEMENT, except that
the original contents of newelem are not cleared to 0 (i.e. a copy
is made).
VIR_DELETE_ELEMENT: delete one element at an arbitrary index within an
array of objects. It's assumed that the element being deleted is
already saved elsewhere (or cleared, if that's what is appropriate).
All five of these macros have an _INPLACE variant, which skips the
memory re-allocation of the array, assuming that the caller has
already done it (when inserting) or will do it later (when deleting).
Note that VIR_DELETE_ELEMENT* can return a failure, but only if an
invalid index is given (index + amount to delete is > current array
size), so in most cases you can safely ignore the return (that's why
the helper function virDeleteElementsN isn't declared with
ATTRIBUTE_RETURN_CHECK). A warning is logged if this ever happens,
since it is surely a coding error.
[*] One initial problem with the INSERT and APPEND macros was that,
due to both the array pointer and newelem pointer being cast to void*
when passing to virInsertElementsN(), any chance of type-checking was
lost. If we were going to move in newelem with a memmove anyway, we
would be no worse off for this. However, most current open-coded
insert/append operations use direct struct assignment to move the new
element into place (or just populate the new element directly) - thus
use of the new macros would open a possibility for new usage errors
that didn't exist before (e.g. accidentally sending &newelemptr rather
than newelemptr - I actually did this quite a lot in my test
conversions of existing code).
But thanks to Eric Blake's clever thinking, I was able to modify the
INSERT and APPEND macros so that they *do* check for both assignment
and size compatibility of *ptr (an element in the array) and newelem
(the element being copied into the new position of the array). This is
done via clever use of the C89-guaranteed fact that the sizeof()
operator must have *no* side effects (so an assignment inside sizeof()
is checked for validity, but not actually evaluated), and the fact
that virInsertElementsN has a "# of new elements" argument that we
want to always be 1.
Commit 71d1256 tried to fix a problem where rebasing an old
branch on top of newer libvirt.git resulted in automake failing
because of a missing AUTHORS file. However, while the fix
worked for an incremental 'make', it did not work for someone
that directly reran './autogen.sh'. Reported by Laine Stump.
* autogen.sh (autoreconf): Check for same conditions as cfg.mk.
* cfg.mk (_update_required): Add comments.
Ever since commit 7b21981c started generating AUTHORS, we now have
the situation that if you flip between two branches in the same
git repository that cross that commit boundary, then 'make' will
fail due to automake complaining about AUTHORS not existing. The
simplest solution is to realize that if AUTHORS does not exist,
then we flipped branches so we will need to rerun bootstrap
anyways; and rerunning bootstrap ensures AUTHORS will exist in time.
* cfg.mk (_update_required): Also depend on AUTHORS.
This documents the following whitespace rules
if(foo) // Bad
if (foo) // Good
int foo (int wizz) // Bad
int foo(int wizz) // Good
bar = foo (wizz); // Bad
bar = foo(wizz); // Good
typedef int (*foo) (int wizz); // Bad
typedef int (*foo)(int wizz); // Good
int foo( int wizz ); // Bad
int foo(int wizz); // Good
There is a syntax-check rule extension to validate all these rules.
Checking for 'function (...args...)' is quite difficult since it
needs to ignore valid usage with keywords like 'if (...test...)'
and while/for/switch. It must also ignore source comments and
quoted strings.
It is not possible todo this with a simple regex in the normal
syntax-check style. So a short Perl script is created instead
to analyse the source. In practice this works well enough. The
only thing it can't cope with is multi-line quoted strings of
the form
"start of string\
more lines\
more line\
the end"
but this can and should be written as
"start of string"
"more lines"
"more line"
"the end"
with this simple change, the bracket checking script does not
have any false positives across libvirt source, provided it
is only run against .c files. It is not practical to run it
against .h files, since those use whitespace extensively to
get alignment (though this is somewhat inconsistent and could
arguably be fixed).
The only limitation is that it cannot detect a violation where
the first arg starts with a '*', eg
foo(*wizz);
since this generates too many false positives on function
typedefs which can't be supressed efficiently.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With our fix of mkostemp (pushed as 2b435c15) we define a macro
to compile with uclibc. However, this definition is conditional
and thus needs to be properly indented. Moreover, with this definition
sc_prohibit_mkstemp syntax-check rule keeps yelling:
src/util/logging.c:63:# define mkostemp(x,y) mkstemp(x)
maint.mk: use mkostemp with O_CLOEXEC instead of mkstemp
Therefore we should ignore this file for this rule.
https://bugzilla.redhat.com/show_bug.cgi?id=871756
Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.
For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program. We should prefer mkostemp[s] in the first place.
* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
This patch resolves: https://bugzilla.redhat.com/show_bug.cgi?id=871201
If libvirt is restarted after updating the dnsmasq or radvd packages,
a subsequent "virsh net-destroy" will fail to kill the dnsmasq/radvd
process.
The problem is that when libvirtd restarts, it re-reads the dnsmasq
and radvd pidfiles, then does a sanity check on each pid it finds,
including checking that the symbolic link in /proc/$pid/exe actually
points to the same file as the path used by libvirt to execute the
binary in the first place. If this fails, libvirt assumes that the
process is no longer alive.
But if the original binary has been replaced, the link in /proc is set
to "$binarypath (deleted)" (it literally has the string " (deleted)"
appended to the link text stored in the filesystem), so even if a new
binary exists in the same location, attempts to resolve the link will
fail.
In the end, not only is the old dnsmasq/radvd not terminated when the
network is stopped, but a new dnsmasq can't be started when the
network is later restarted (because the original process is still
listening on the ports that the new process wants).
The solution is, when the initial "use stat to check for identical
inodes" check for identity between /proc/$pid/exe and $binpath fails,
to check /proc/$pid/exe for a link ending with " (deleted)" and if so,
truncate that part of the link and compare what's left with the
original binarypath.
A twist to this problem is that on systems with "merged" /sbin and
/usr/sbin (i.e. /sbin is really just a symlink to /usr/sbin; Fedora
17+ is an example of this), libvirt may have started the process using
one path, but /proc/$pid/exe lists a different path (indeed, on F17
this is the case - libvirtd uses /sbin/dnsmasq, but /proc/$pid/exe
shows "/usr/sbin/dnsmasq"). The further bit of code to resolve this is
to call virFileResolveAllLinks() on both the original binarypath and
on the truncated link we read from /proc/$pid/exe, and compare the
results.
The resulting code still succeeds in all the same cases it did before,
but also succeeds if the binary was deleted or replaced after it was
started.
AUTHORS.in tracks the maintainers, as well as some folks who were
previously in AUTHORS but don't have a git commit with proper
attribution.
Generated output is sorted alphabetically and lacks pretty spacing, so
tweak AUTHORS.in to follow the same format.
Additionally, drop the syntax-check rule that previously validated
AUTHORS against git log.
Several people have reported that if the .gnulib submodule is dirty,
then 'make' will go into an infinite loop attempting to rerun bootstrap,
because that never cleans up the dirty submodule. By default, we
should halt and make the user investigate, but if the user doesn't
know why or care that the submodule is dirty, I also added the ability
to 'make CLEAN_SUBMODULE=1' to get things going again.
Also, while testing this, I noticed that when a submodule update was
needed, 'make' would first run autoreconf, then bootstrap (which
reruns autoreconf); adding a strategic dependency allows for less work.
* .gnulib: Update to latest, for maint.mk improvements.
* cfg.mk (_autogen): Also hook maint.mk, to run before autoreconf.
* autogen.sh (bootstrap): Refuse to run if gnulib is dirty, unless
user requests discarding gnulib changes.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
To be able to test the QEMU monitor code, we need to have a fake
QEMU monitor server. This introduces a simple (dumb) framework
that can do this. The test case registers a series of items to
be sent back as replies to commands that will be executed. A
thread runs the event loop looking for incoming replies and
sending back this pre-registered data. This allows testing all
QEMU monitor code that deals with parsing responses and errors
from QEMU, without needing QEMU around
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Based on the similar gnulib commit 96ad9077. The use of
$(_sc_search_regexp) already injects $(ME) into any output
messages, so a failure of these rules would look like this,
pre-patch:
maint.mk: maint.mk: use virStrToLong_*, not strtol variants
* cfg.mk (sc_prohibit_strncmp, sc_prohibit_strtol)
(sc_libvirt_unmarked_diagnostics): Drop redundant $(ME).
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded. Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
Nothing in the testsuite or examples directory should be translated,
as it is not part of the normally installed binary. We already
meet this rule, but enforcing it will make it easier to remember.
Suggested by Daniel P. Berrange.
* cfg.mk (sc_prohibit_useless_translation): Enhance rule.
'make distcheck' was failing because a syntax check file,
.sc-start-sc_vulnerable_makefile_CVE-2012-3386, got left
behind. I traced it to the 'distdir' rule depending on a
shortcut syntax-check name rather than the full rule name
normally used during 'local-check' from maint.mk.
* cfg.mk (distdir): Depend on full rule, not shorthand name.
* tools/virsh.c: New macro vshStrcasecmp
* tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of
strcasecmp
* tools/virsh-snapshot.c: Likewise
* cfg.mk: Only avoid doing strcase checking for virsh.c
This introduces a fairly basic reference counted virObject type
and an associated virClass type, that use atomic operations for
ref counting.
In a global initializer (recommended to be invoked using the
virOnceInit API), a virClass type must be allocated for each
object type. This requires a class name, a "dispose" callback
which will be invoked to free memory associated with the object's
fields, and the size in bytes of the object struct.
eg,
virClassPtr connclass = virClassNew("virConnect",
sizeof(virConnect),
virConnectDispose);
The struct for the object, must include 'virObject' as its
first member
eg
struct _virConnect {
virObject object;
virURIPtr uri;
};
The 'dispose' callback is only responsible for freeing
fields in the object, not the object itself. eg a suitable
impl for the above struct would be
void virConnectDispose(void *obj) {
virConnectPtr conn = obj;
virURIFree(conn->uri);
}
There is no need to reset fields to 'NULL' or '0' in the
dispose callback, since the entire object will be memset
to 0, and the klass pointer & magic integer fields will
be poisoned with 0xDEADBEEF before being free()d
When creating an instance of an object, one needs simply
pass the virClassPtr eg
virConnectPtr conn = virObjectNew(connclass);
if (!conn)
return NULL;
conn->uri = virURIParse("foo:///bar")
Object references can be manipulated with
virObjectRef(conn)
virObjectUnref(conn)
The latter returns a true value, if the object has been
freed (ie its ref count hit zero)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The cfg.mk file rule to check for tab characters was not
applied to perl files. Much of our Perl code is full of
tabs as a result. Kill them, kill them all !
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
We were defining 'func_or' as '|VIR_ERROR|...', which when put
inside 'func_re' resulted in a regex that matches everything in
isolation. Thankfully, we always used func_re with a leading
anchor \<, and since the empty regex does not start a word, we
happened to get the result we wanted; but it's better to define
func_or without a leading space converted into a leading empty
alternation.
* cfg.mk (func_or): Strip leading space.
Pick up some build fixes in the latest gnulib. In particular,
we want to ensure that official tarballs are secure, but don't
want to penalize people who don't run 'make dist', since fixed
automake still hasn't hit common platforms like Fedora 17.
* .gnulib: Update to latest, for Automake CVE-2012-3386 detection.
* bootstrap: Resync from gnulib.
* bootstrap.conf (gnulib_extra_files): Drop missing, since gnulib
has dropped it in favor of Automake's version.
* cfg.mk (local-checks-to-skip): Conditionally skip the security
check in cases where it doesn't matter.
Commands in node device group moved from virsh.c to virsh-nodedev.c,
* virsh.c: Remove commands in node device group.
* virsh-nodedev.c: New file, filled with commands in node device group
* po/POTFILES.in: Add virsh-nodedev.c
* cfg.mk: Skip to check config.h including for virsh-nodedev.c
Commands in host group moved from virsh.c to virsh-host.c,
* virsh.c: Remove commands in host group.
* virsh-host.c: New file, filled with commands in host group
* po/POTFILES.in: Add virsh-host.c
* cfg.mk: Skip to check config.h including for virsh-host.c
Commands to manage domain snapshot are moved from virsh.c to
virsh-snapshot.c.
* virsh.c: Remove domain snapshot commands.
* virsh-snapshot.c: New file, filled with domain snapshot commands.
* po/POTFILES.in: Add virsh-snapshot.c
* cfg.mk: Skip strcase and config.h including checking for
virsh-snapshot.c
Commands to manage secret are moved from virsh.c to virsh-secret.c,
with a few helpers for secret command use.
* virsh.c: Remove secret commands and a few helpers.
(vshCommandOptSecret, and vshCommandOptSecretBy)
* virsh-secret.c: New file, filled with secret commands and its helpers.
* po/POTFILES.in: Add virsh-secret.c
* cfg.mk: Skip to check config.h including for virsh-secret.c
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c,
with a few helpers for network filter command use.
* virsh.c: Remove network filter commands and a few helpers.
(vshCommandOptNWFilter, and vshCommandOptNWFilterBy)
* virsh-nwfilter.c: New file, filled with network filter commands and its helpers.
* po/POTFILES.in: Add virsh-nwfilter.c
* cfg.mk: Skip to check config.h including for virsh-nwfilter.c
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.
* virsh.c: Remove interface commands and a few helpers.
(vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
Commands to manage network are moved from virsh.c to virsh-network.c,
with a few helpers for network command use.
* virsh.c: Remove network commands and a few helpers.
* virsh-network.c: New file, filled with network commands and its
helpers.
* po/POTFILES.in: Add virsh-network.c
* cfg.mk: Skip to check config.h including for virsh-network.c
This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage pool and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-pool.c:
New file, filled with commands of storage pool group and its
helpers.
* po/POTFILES.in:
Add virsh-pool.c
* cfg.mk:
Skip to check config.h including for virsh-pool.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage volume and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-volume.c:
New file, filled with commands of storage volume group and its
helpers.
* po/POTFILES.in:
Add virsh-volume.c
* cfg.mk:
Skip to check config.h including for virsh-volume.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.
* tools/virsh.c:
- Remove commands for domain group, and one helper
(vshDomainVcpuStateToString)
- vshStreamSink is moved before commands's definition for it's
also used by commands not of domain group, such as volUpload.
* tools/virsh-domain.c:
- New file, commands for domain group and the one helper are
moved into it.
* po/POTFILES.in:
- Add virsh-domain.c
* cfg.mk:
- Skip to check config.h including for virsh-domain.c
This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.
* tools/virsh.c:
- Remove commands for domain monitoring group and a few helpers (
vshDomainIOErrorToString, vshGetDomainDescription,
vshDomainControlStateToString, vshDomainStateToString) not for
common use.
- Remove (incldue "intprops.h").
* tools/virsh-domain-monitor.c:
- New file, filled with commands of domain monitor group.
- Add "intprops.h".
* cfg.mk:
- Skip strcase checking for virsh-domain-monitor.c
- Skip to check config.h including for virsh-domain-monitor.c
* po/POTFILES.in
- Add virsh-domain-monitor.c
Update the legacy Xen drivers to use virReportError instead of
the statsError, virXenInotifyError, virXenStoreError,
virXendError, xenUnifiedError, xenXMError custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the libvirtd config handling code to use virReportError
instead of the virConfError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the nodeinfo helper code to use virReportError instead
of the nodeReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the security drivers to use virReportError instead of
the virSecurityReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the Power-Hypervisor driver to use virReportError
instead of the PHYP_ERROR custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the ESX driver to use virReportError instead of
the ESX_ERROR & ESX_VI_ERROR custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Xen driver had a number of error reports which passed a
constant string without format specifiers and was missing
"%s". Furthermore the errors were related to failing system
calls, but virReportSystemError was not used. So the only
useful piece of info (the errno) was being discarded
Update the linux bridge driver to use virReportError instead
of the networkReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the network filter driver to use virReportError instead
of the virNWFilterReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the node device driver to use virReportError instead of
the virNodeDeviceReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the secret driver to use virReportError instead of the
virSecretReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the storage driver to use virReportError instead of
the virStorageReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly every source file does something like
#define VIR_FROM_THIS VIR_FROM_FOO
#define virFooReportErorr(code, ...) \
virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
__FUNCTION__, __LINE__, \
__VA_ARGS__)
This creates needless duplication and inconsistent error
reporting function names in each file. It is trivial to
just have virterror_internal.h provide a virReportError
macro that is equivalent
* src/util/virterror_internal.h: Define virReportError(code, ...)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother). So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages. This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.
* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
I noticed this during 'make syntax-check':
prohibit_readlink
grep: Unmatched ( or \(
* cfg.mk (exclude_file_name_regexp--sc_prohibit_readlink): Fix
mismatched '('.
Currently, we either generate some cmd*Edit commands (cmdPoolEdit
and cmdNetworkEdit) via sed script or copy the body of cmdEdit
(e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes
it harder to implement any new feature to our editing system.
Therefore switch to new implementation - define macros to:
- dump XML (EDIT_GET_XML)
- take an action if XML wasn't changed,
usually just vshPrint() (EDIT_NOT_CHANGED)
- define new object (EDIT_DEFINE) - the edited XML is in @doc_edited
- free object defined by EDIT_DEFINE (EDIT_FREE)
and #include "virsh-edit.c"
strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary. We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.
* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.
Gnulib finally relaxed the isatty license, needed as first mentioned here:
https://www.redhat.com/archives/libvir-list/2012-February/msg01022.html
Other improvements include better syntax-check rules (we can delete one
of ours now that it is a duplicate) and better compiler warning usage.
* .gnulib: Update to latest, for isatty.
* cfg.mk (sc_prohibit_strncpy): Drop a now-redundant rule.
* bootstrap.conf (gnulib_modules): Add isatty.
* bootstrap: Resync from gnulib.
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The use of readlink() in lxc_container.c is intentional; we don't
want an absolute pathname there.
* src/util/cgroup.h (VIR_CGROUP_SYSFS_MOUNT): Indent properly.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_readlink): Add
exemption.
Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.
The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.
Test 2 data grabbed from a 2-core 1-node laptop.
Test 3 data grabbed from a 48-cpu AMD Magny Cours box.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-2*: New test data.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-3*: Likewise.
* tests/nodeinfotest.c (mymain): Run them.
* cfg.mk
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Exempt
new test files.
Otherwise, a string such as _("Don't use \"" VAR "\".") would
complain about unmarked diagnostics.
* cfg.mk (sc_libvirt_unmarked_diagnostics): Handle \" in message.
Ensure we don't introduce any more lousy integer parsing in new
code, while avoiding a scrub-down of existing legacy code.
Note that we also need to enable sc_prohibit_atoi_atof (see cfg.mk
local-checks-to-skip) before we are bulletproof, but that also
entails scrubbing I'm not ready to do at the moment.
* src/util/util.c (virStrToLong_i, virStrToLong_ui)
(virStrToLong_l, virStrToLong_ul, virStrToLong_ll)
(virStrToLong_ull, virStrToDouble): Mark exemptions.
* src/util/virmacaddr.c (virMacAddrParse): Likewise.
* cfg.mk (sc_prohibit_strtol): New syntax check.
(exclude_file_name_regexp--sc_prohibit_strtol): Ignore files that
I'm not willing to fix yet.
(local-checks-to-skip): Re-enable sc_prohibit_atoi_atof.
We are so close to a release that we don't want to pull in a
gnulib submodule update and risk regressions, since there has
been a lot of other gnulib churn upstream. However, there are
a couple of gnulib issues that are worth fixing in isolation,
by applying local patches to gnulib.
There was an upstream gnulib bug in maint.mk that rendered most
of our syntax checks ineffective (and fixing it flushed out a
minor bug in our code):
https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html
There is still an upstream bug where gnulib uses the wrong type
for ssize_t on mingw; we need the fix now even though it has not
yet been accepted into gnulib:
https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00188.html
* gnulib/local/top/maint.mk.diff: Pick up upstream gnulib
maint.mk.
* gnulib/local/m4/ssize_t.m4.diff: Work around gnulib bug.
* src/libvirt.c: Remove unused header.
* cfg.mk
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Exempt
gnulib local files.
