The event test does not try to include libvirt internals. Using a macro
named VIR_DEBUG might hint to such usage. Additionally it's useless
since it's used only in the main() function.
Modernize the message strings while touching them.
virTypedParamsValidate currently uses an index based check to find
duplicate parameters. This check does not work. Consider the following
simple example:
We have only 2 keys
A (multiples allowed)
B (multiples NOT allowed)
We are given the following list of parameters to check:
A
A
B
If you work through the validation loop you will see that our last iteration
through the loop has i=2 and j=1. In this case, i > j and keys[j].value.i will
indicate that multiples are not allowed. Both conditionals are satisfied so
an incorrect error will be given: "parameter '%s' occurs multiple times"
This patch replaces the index based check with code that remembers
the name of the last parameter seen and only triggers the error case if
the current parameter name equals the last one. This works because the
list is sorted and duplicate parameters will be grouped together.
In reality, we hit this bug while using selective block migration to migrate
a guest with 5 disks. 5 was apparently just the right number to push i > j
and hit this bug.
virsh migrate --live guestname --copy-storage-all
--migrate-disks vdb,vdc,vdd,vde,vdf
qemu+ssh://dsthost/system
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Migration API allows to specify a destination domain configuration.
Offline domain has only inactive XML and it is replaced by configuration
specified using VIR_MIGRATE_PARAM_DEST_XML param. In case of live
migration VIR_MIGRATE_PARAM_DEST_XML param is applied for active XML.
This commit introduces the new VIR_MIGRATE_PARAM_PERSIST_XML param
that can be used within live migration to replace persistent/inactive
configuration.
Required for: https://bugzilla.redhat.com/show_bug.cgi?id=835300
By default, `zfs create -V ...` reserves space for the entire volsize,
plus some extra (which attempts to account for overhead).
If `zfs create -s -V ...` is used instead, zvols are (fully) sparse.
A middle ground (partial allocation) can be achieved with
`zfs create -s -o refreservation=... -V ...`. Both libvirt and ZFS
support this approach, so the ZFS storage backend should support it.
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Commit id '4b75237f' seems to have triggered Coverity into finding
at least one memory leak in xen_xl.c for error path for cleanup where
the listenAddr would be leaked. Reviewing other callers, it seems that
qemu_parse_command.c would have the same issue, so just it too.
To ensure the libvirt libxl driver will build with future versions
of Xen where the libxl API may change in incompatible ways,
explicitly use LIBXL_API_VERSION 0x040200. The libxl driver
does use new libxl APIs that have been added since Xen 4.2, but
currently it does not make use of any changes made to existing
APIs such as libxl_domain_create_restore or libxl_set_vcpuaffinity.
The version can be bumped if/when the libxl driver consumes the
changed APIs.
Further details can be found in the following discussion thread
https://www.redhat.com/archives/libvir-list/2016-April/msg00178.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When creating the master key, we used mode 0600 (which we should) but
because we were creating it as root, the file is not readable by any
qemu running as non-root. Fortunately, it's just a matter of labelling
the file. We are generating the file path few times already, so let's
label it in the same function that has access to the path already.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In a few places in libvirt we busy-wait for events, for example qemu
creating a monitor socket. This is problematic because:
- We need to choose a sufficiently small polling period so that
libvirt doesn't add unnecessary delays.
- We need to choose a sufficiently large polling period so that
the effect of busy-waiting doesn't affect the system.
The solution to this conflict is to use an exponential backoff.
This patch adds two functions to hide the details, and modifies a few
places where we currently busy-wait.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
In case of ploop volume, target path of the volume is the path to the
directory that contains image file named root.hds and DiskDescriptor.xml.
While using uploadVol and downloadVol callbacks we need to open root.hds
itself.
Upload or download operations with ploop volume are only allowed when
images do not have snapshots. Otherwise operation fails.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refreshes meta-information such as allocation, capacity, format, etc.
Ploop volumes differ from other volume types. Path to volume is the path
to directory with image file root.hds and DiskDescriptor.xml.
https://openvz.org/Ploop/format
Due to this fact, operations of opening the volume have to be done once
again. get the information.
To decide whether the given volume is ploops one, it is necessary to check
the presence of root.hds and DiskDescriptor.xml files in volumes' directory.
Only in this case the volume can be manipulated as the ploops one.
Such strategy helps us to resolve problems that might occure, when we
upload some other volume type from ploop source.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Recursively deletes whole directory of a ploop volume.
To delete ploop image it has to be unmounted.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
These callbacks let us to create ploop volumes in dir, fs and etc. pools.
If a ploop volume was created via buildVol callback, then this volume
is an empty ploop device with DiskDescriptor.xml.
If the volume was created via .buildFrom - then its content is similar to
input volume content.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
To prevent the error messages in cfg.mk from triggering the very
same rules they're supposed to explain, we split the message in
the middle of a symbol name, ending up with stuff like
'I am a me'ssage
Instead of relying on these quotation tricks, simply exclude
cfg.mk from the relevant checks.
Rather than trying some magic calculations on our side query the monitor
for the current size of the memory balloon both on hotplug and
hotunplug.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1220702
Now that there is just one format of the memory balloon command line
used the code can be merged into a single function.
Additionally with some tweaks to the control flow the code is easier to
read.
The change that made qemu not add the memballoon by default happened
prior to 0.12.0. Additionaly the comment was misleading due to the code
that was added below. Since we always need to add a balloon on the
commandline drop the comment.
Move some API specific documentation out of -docs package and into
-devel, and some end user docs out of -devel and into -docs, then
drop the -devel dep on -docs. This is more in line with the suggested
Fedora guidelines.
https://bugzilla.redhat.com/show_bug.cgi?id=1310155
The only caller of this code is:
for (i = 0; i < dom->def->ngraphics; i++) {
if (dom->def->graphics[i]->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) {
if (!(mig->graphics =
qemuMigrationCookieGraphicsAlloc(driver, dom->def->graphics[i])))
return -1;
mig->flags |= QEMU_MIGRATION_COOKIE_GRAPHICS;
break;
}
}
So this is never triggered for VNC, and in fact VNC has no support for
seamless migration anyways so that seems correct. Drop the dead VNC
handling.
The reason for this is to fix the automatic rebuild of libvirt-common.h.in.
All *.in files should be automatically rebuilt each time they're modified.
It works well for makefiles and pkgconfig files, since they do have a valid
dependency in the top-level Makefile. However, with libvirt-common.h.in
there is no dependency in the top-level Makefile and there's no need for it
either, so this rule
include/libvirt/libvirt-common.h: $(top_builddir)/config.status \
$(top_srcdir)/include/libvirt/libvirt-common.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
is never hit and should be moved to include/Makefile, but that's automake's
job. According to GNU automake docs:
"Files created by AC_CONFIG_FILES, be they
Automake Makefiles or not, are all removed by ‘make distclean’. Their inputs
are automatically distributed, unless they are the output of prior
AC_CONFIG_FILES commands. Finally, rebuild rules are generated in the Automake
Makefile existing in the subdirectory of the output file, if there is one, or
in the top-level Makefile otherwise."
Which means that if we want to have the rule for libvirt-common.h automatically
generated by automake, the include/Makefile.am needs to be moved into libvirt/
subdirectory and $SUBDIRS in the top-level Makefile need to be adjusted as
well. This patch moves Makefile.am from include/ to include/libvirt, adjusting
the prefixes accordingly as well as updates the top-level Makefile $SUBDIRS to
properly hint automake to generate all rules at proper places.
Best way to see the changes, use -M with 'git show'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since vz driver is now lives as a part of daemon we can benefit from
this fact and allow vz clients to use shared drivers API like storage,
network, nwfilter etc.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
The pxb device is a PCIe expander bus that can be added to any
Q35-based machinetype. A single PCIe port (*not* hotpluggable) is
provided; if more than one device is desired, or if hotplug
support is needed, either a pcie-root-port, or some combination of
pcie-switch-upstream-port and pcie-swith-downstream-ports must be
added to it. It can have a NUMA node number associated with it, as
well as a bus number.
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
The pxb device is a PCI expander bus that can be added to any
440fx-based machinetype. The PCI bus that is created has 32 standard
PCI slots (hotpluggable). It can have a NUMA node number associated
with it, as well as a bus number.
There are two places in qemu_domain_address.c where we have a switch
statement to convert PCI controller models
(VIR_DOMAIN_CONTROLLER_MODEL_PCI*) into the connection type flag that
is matched when looking for an upstream connection for that model of
controller (VIR_PCI_CONNECT_TYPE_*). This patch makes a utility
function in conf/domain_addr.c to do that, so that when a new PCI
controller is added, we only need to add the new model-->connect-type
in a single place.
The flags used to determine which devices could be plugged into which
controllers were quite confusing, as they tried to create classes of
connections, then put particular devices into possibly multiple
classes, while sometimes setting multiple flags for the controllers
themselves. The attempt to have a single flag indicate, e.g. that a
root-port or a switch-downstream-port could connect was not only
confusing, it was leading to a situation where it would be impossible
to specify exactly the right combinations for a new controller.
The solution is for the VIR_PCI_CONNECT_TYPE_* flags to have a 1:1
correspondence with each type of PCI controller, plus a flag for a PCI
endpoint device and another for a PCIe endpoint device (the only
exception to this is that pci-bridge and pcie-expander-bus controllers
have their upstream connection classified as
VIR_PCI_CONNECT_TYPE_PCI_DEVICE since they can be plugged into
*exactly* the same ports as any endpoint device). Each device then
has a single flag for connect type (plus the HOTPLUG flag if that
device can e hotplugged), and each controller sets the CONNECT bits
for all controllers that can be plugged into it, as well as for either
type of endpoint device that can be plugged in (and the HOTPLUG flag
if it can accept hotplugged devices).
With this change, it is *slightly* easier to understand the matching
of connections (as long as you remember that the flag for a
device/upstream-facing connection of a controller is the same as that
device's type, while the flags for a controller's downstream
connections is the OR of all device types that can be plugged into
that controller). More importantly, it will be possible to correctly
specify what can be plugged into a pcie-switch-expander-bus, when
support for it is added.
When support for dmi-to-pci-bridge was added, it was assumed that,
just as with the pci-root bus, slot 0 was reserved. This is not the
case - it can be used to connect a device just like any other slot, so
remove the restriction and update the test cases that auto-assign an
address on a dmi-to-pci-bridge.
Every other maxSlot was either set to 0 or to
VIR_PCI_ADDRESS_SLOT_LAST, but this one was for some reason set to the
literal value 31 (which is the same as VIR_PCI_ADDRESS_SLOT_LAST).
This makes them all consistent.
This is especially useful for "bus", since the bus of a device's pci
address is matched to the "index" of a controller to determine which
bus it will be connected to, and "index" is always specified in
decimal - being able to specify both in decimal at least makes it
easier to assure a device is being assigned to the correct bus when it
is added. For the other attributes, it is just a convenience.
(MB: the parser already allows for any of these attributes to be given
in decimal, and there are even examples floating around on the
internet that give them in decimal rather than hex (written in the
days before virsh did schema validation on all XML). This only updates
the schema to match the parser.)
nwfilter.rng defines uint16range and uint32range, but in a different
manner (it also allows a variable name as the value, rather than just
a decimal or hex number). I wanted to add uint16range to
basictypes.rng, but my desired definition was parallel to those for
uint8range and uint24range which are defined in basictypes.rng - they
*don't* allow a variable name for the value.
The simplest path to make everyone happy is to make the "plain"
versions in basictypes.rng have simpler names - "uint8", "uint16", and
"uint24". This patch renames uint8range and uint24range to uint8 and
uint24, while the next patch will add uint16.
