Automatically free 'cpuinfo' and remove the cleanup label and ret
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have virDomainGetCPUStats() API which offers querying
statistics on host CPU usage by given guest. And it works in two
modes: getting overall stats (@start_cpu == -1, @ncpus == 1) or
getting per host CPU usage.
For the QEMU driver it is implemented by looking into values
stored in corresponding cpuacct CGroup controller. Well, this
works for system instances, where libvirt has permissions to
create CGroups and place QEMU process into them. But it does not
fly for session connection, where no CGroups are set up.
Fortunately, we can do something similar to v8.8.0-rc1~95 and use
virProcessGetStatInfo() to fill the overall stats. Unfortunately,
I haven't found any source of per host CPU usage, so we just
continue throwing an error in that case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Firstly, the virProcessGetStatInfo() does not fail really. But
even if it did, it sets correct errno only sometimes (and even
that is done in a helper it's calling - virProcessGetStat() and
even there it's the case only in very few error paths).
Therefore, using virReportSystemError() to report errors is very
misleading. Use plain virReportError() instead. Luckily, there
are only two places where the former was used:
chDomainHelperGetVcpus() and qemuDomainHelperGetVcpus() (not a
big surprise since CH driver is heavily inspired by QEMU driver).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure same behaviour when remote driver is or is not used we must
not steal the FDs and array holding them passed to qemuDomainFDAssociate
but rather duplicate them. At the same time the remote driver must close
and free them to prevent leak.
Pointed out by Coverity as FD leak on error path:
*** CID 404348: Resource leaks (RESOURCE_LEAK)
/src/remote/remote_daemon_dispatch.c: 7484 in remoteDispatchDomainFdAssociate()
7478 rv = 0;
7479
7480 cleanup:
7481 if (rv < 0)
7482 virNetMessageSaveError(rerr);
7483 virObjectUnref(dom);
>>> CID 404348: Resource leaks (RESOURCE_LEAK)
>>> Variable "fds" going out of scope leaks the storage it points to.
7484 return rv;
Fixes: abd9025c2fd
Fixes: f762f87534e
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Probing stats and block copy to a FD passed image is not yet supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Implement passing and storage of FDs for the qemu driver. The FD tuples
are g_object instances stored in a per-domain hash table and are
automatically removed once the connection is closed.
In the future we can consider supporting also to not tie the lifetime of
the passed FDs bound to the connection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The patch moving the code didn't faithfully represent the typecasting
of the 'bandwidth' variable needed to properly convert from the legacy
'unsigned long' argument which resulted in a build failure on 32 bit
systems:
../src/qemu/qemu_block.c: In function ‘qemuBlockCommit’:
../src/qemu/qemu_block.c:3249:23: error: comparison is always false due to limited range of data type [-Werror=type-limits]
3249 | if (bandwidth > LLONG_MAX >> 20) {
| ^
Fix it by returning the check into qemuDomainBlockCommit as it's needed
only because of the legacy argument type in the old API and use
'unsigned long long' for qemuBlockCommit.
Fixes: f5a77198bf9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The created job will be needed by external snapshot delete code so
rework qemuBlockCommit to return that pointer.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
External snapshots will use this to synchronize qemu block jobs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow to use it while having async domain job active which we
will use when deleting external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow to use it while having async domain job active which we
will use when deleting external snapshots. At the same time we will need
to have the block job started as synchronous.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move the code for finishing a job in the ready state to qemu_block.c.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The parameter was only used to select which states correspond to an
active or failed post-copy migration. But these states are either
applicable to both operations or the check would just paper over a code
bug in case of an impossible combination of state and operation. By
dropping the check we can make the code simpler and also reuse existing
virDomainObjIsFailedPostcopy function and only check for active
post-copy states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver uses connection close callbacks in more places requiring
more changes than other drivers, but luckily the changes are very
straightforward. The migration code was written in a way ensuring that
there's just one callback present so this can be preserved directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can't fail so there's no point in returning anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This continues and finishes propagation of the @hv_passthrough
argument started in the previous commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, QEMU took screenshots in PPM. While this might use
to be popular format, as of v7.1.0-rc0~125^2~6 it is possible to
take screenshots in PNG. This is more popular and renders almost
everywhere, which is not the case for PPM (for instance, modern
browsers do not render it).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'screendump' command has new argument 'format'. Let's expose
this on our QMP level so that callers can specify the format, if
they wish so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internal domain state needs to be refreshed after reset from the guest
side because it may be inconsistent with the internal qemu state.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Internal domain state may change during the reset and qemu does
not always send events about it. In case it happens, internal
state of the domain in libvirt would be inconsistent with the
internal state in qemu which could cause additional problems
(e.g. cdrom tray state can change from open to closed). The
solution is to refresh state after a successful reset to query
qemu about the current internal domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1824722
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the 'cleanup' label and 'ret' variable as we can now directly
return form all cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Never remove the TPM state on outgoing migration if the storage setup
has shared storage for the TPM state files. Also, do not do the security
cleanup on outgoing migration if shared storage is detected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in QEMU's commit of v4.0.0-rc0~202^2~3 the
query-current-machine command is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.6.0-rc0~74^2~6 the
DUMP_COMPLETED event is always available for all QEMU versions we
support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainQueryWakeupSuspendSupport() does not change state
of the domain as it just runs 'query-current-machine' QMP
command. Therefore, there's no need for it to acquire MODIFY job,
QUERY job is perfectly okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The was an attempt to document the retvals for
qemuDomainQueryWakeupSuspendSupport(). However, it's misleading
because in reality, the function can return nothing but 0 or -1,
but the comment implies retval of 1 too.
Since the set of possible return values complies with our
unwritten rule (0 for success, -1 for error), there's no real
value in having the comment and as such can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of scenarios where we need to reflect MAC change
done in the guest:
1) domain restore from a file (here, we don't store updated MAC
in the save file and thus on restore create the macvtap with
the original MAC),
2) reconnecting to a running domain (here, the guest might have
changed the MAC while we were not running),
3) migration (here, guest might change the MAC address but we
fail to respond to it,
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are not updating domain XML to new MAC address, just merely
setting host side of macvtap. But we don't need a MODIFY job for
that, QUERY is just fine.
This allows us to process the event should it occur during
migration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Parts of the code that responds to the NIC_RX_FILTER_CHANGED
event are going to be re-used. Separate them into a function
(qemuDomainSyncRxFilter()) and move the code into qemu_domain.c
so that it can be re-used from other places of the driver.
There's one slight change though: instead of passing device alias
from the just received event to qemuMonitorQueryRxFilter(), I've
switched to using the alias stored in our domain definition. But
these two are guaranteed to be equal. virDomainDefFindDevice()
made sure about that, if nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call virNetDevRxFilterFree() explicitly, when
corresponding variables can be declared as
g_autoptr(virNetDevRxFilter).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new worker qemuDomainGetStatsVm which reports the
stats returned by "query-stats" via qemuMonitorQueryStats for the VM
target.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
This patch adds the stats queried by qemuMonitorQueryStats for vCPU and
add them according to their QOM device path
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
During its initialization, the QEMU driver iterates over
hugetlbfs mount points, creating the driver specific path in each
of them ($prefix/libvirt/qemu). This path is created with very
wide mode (0777) because per-domain directories are then created
under it.
Separate this code into a function so that it can be re-used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For prevent memory leak and easier to use, So change
virDomainEventTunableNew to get virTypedParameterPtr *params
and set it = NULL.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Upcoming patch which is fixing the opening of drivers in monolithic mode
needs to know whether we are inside 'libvirtd' but the code where the
decision needs to happen is not re-compiled per daemon. Thus we need to
pass this information to the stateful driver init function so that it
can be remebered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
