Commit 5c17a7ba41 introduced a new feature (ibrs) but did not update
existing cputestdata.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds channel devices to domain capabilities, allowing clients such
as virt-install to avoid using spicevmc channel devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The error message doesn't really convey the information that 3d
acceleration works only for the 'virtio' model and similarly the same
error would be reported if qemu doesn't support acceleration, which is
hard to debug.
Split and clarify the errors.
Noticed in https://gitlab.com/libvirt/libvirt/-/issues/388
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_autofree in capabilities.c for some pointers still using manual cleanup,
and remove unnecessary cleanup.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Change strings to use g_autofree.
Signed-off-by: Maxim Kostin <ttxinee@outlook.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Users can play all sorts of games with mount points. For
instance, they can unmount and mount back a hugetlbfs and only
after that attempt to hotplug memory.
This has an unfortunate consequence though. During memory
hotplug, when qemuProcessBuildDestroyMemoryPaths() is called the
path is created with very restrictive mode (0700) because under
the hood g_mkdir_with_parents(path, 0700) is called.
Therefore, create the driver generic portion of the path
separately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2134009
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
During its initialization, the QEMU driver iterates over
hugetlbfs mount points, creating the driver specific path in each
of them ($prefix/libvirt/qemu). This path is created with very
wide mode (0777) because per-domain directories are then created
under it.
Separate this code into a function so that it can be re-used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
domcapabilities reports spice graphics support even against a minimal
qemu installation without spice modules. Checking for 'query-spice'
in the list of qmp commands supported by qemu is not sufficient to
determine spice support. Checking the command line produces acurrate
results.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds USB redirect devices to domain capabilities, allowing clients
such as virt-install to avoid using redirdev devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The validation of a '<filesystem type='mount'>' device fails if the
elements inside are not ordered in the order in the schema despite using
<interleave>. This is a bug in libxml2's validator as removing the
'<optional>' property from the definition of the 'type' attribute with
'mount' variable fixes the problem.
I've reported it as another instance of a seemingly related issue:
https://gitlab.gnome.org/GNOME/libxml2/-/issues/131
Meanwhile libvirt can re-arrange the schema by extracting the common
bits into a new definition and referencing them from each of the choice
groups explicitly.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/392
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuxml2argvtest pseries-feature parse failure tests uses a symlink
to the pseries-features.xml test domain and control which feature it is
supposed to fail by excluding it from the capabilities list. The
advantage of this approach is that the same XML can be used in multiple
tests.
One downside is that any new pseries capability must be declared in all
existent tests, otherwise all other tests can break if this new
capability happens to be validated early in qemu_validate.c. Any new
parse_error test must declare all other existent capabilities.
Another downside is the fact that we're testing fairly improbable
scenarios: all pseries capabilities being tested here were introduced by
the same QEMU version, 4.2.0, at least as far as libvirt is aware of.
This means that it's no possible to have a scenario where, for example,
ccf-assist is not present but cfpc is. And last, but not the least, it's
getting in the way of our effort to convert all pseries tests to not use
explicit capabilities.
Changing all these tests to use DO_TEST_PARSE_ERROR_NOCAPS() will allow
us to test exactly what we want to test, which is the parse error given
for each feature if the binary does not have support for it. The XML
being used for each test can be simplified to just declare a single
feature. In the end we'll end up with more XML lines, but less
complexity inside qemuxml2argvtest.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Eliminate most of the pseries tests that are using explicit qemu caps
instead of CAPS_LATEST. The remaining tests will be handled in the next
patch.
The changes made are trivial: rename the .args/.err files to
ppc64-latest.(args/err) and do the required changes to match the newest
capabilities.
A notable expection were tests pseries-console-native,
pseries-serial-compat and pseries-serial+console-native. These are
aliases of the pseries-serial-native tests. In this case we needed to
re-create the symlink accordingly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No significant changes from the 7.0.0 capabilities.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After addition of the new libvirt-client-qemu sub-package which is using
python bindings (thus creating a circular dependency between the libvirt
and libvirt-python projects) the integration jobs fail with:
Error:
Problem: conflicting requests
- nothing provides python3-libvirt >= 8.9.0-1.el9 needed by libvirt-client-qemu-8.9.0-1.el9.x86_64
The libvirt-python project now provides the RPMs in artifacts:
https://gitlab.com/libvirt/libvirt-python/-/merge_requests/96
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When libvirt is restarted, the qemuProcessShutdownReboot command is
executed to restore the VM that is being restarted. In this case, a
coredump may occur when we hotplug a pci device since the PCI address
hasn't be inited yet. Moving the initialization of address to the front
of qemuProcessShutdownOrReboot to ensure that we have the address inited.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If QEMU replies to device_del command with "DeviceNotFound"
error, then libvirt doesn't clean the device from the live
configuration.
This is because qemuMonitorDelDevice() returns -2 to
qemuDomainDeleteDevice() and instead of calling
qemuDomainRemoveDevice() the qemuDomainDetachDeviceLive() jumps
right onto cleanup label.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/359
Signed-off-by: Pierre LIBEAU <pierre.libeau@corp.ovh.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'potfile' job is lacking the 'variables' section which defines the
'NAME' variable used by the 'image' property resulting in the 'potfile'
job failing with:
Pulling docker image registry.gitlab.com/libvirt/libvirt/ci-:latest ...
WARNING: Failed to pull image with policy "always": invalid reference format (manager.go:235:0s)
ERROR: Job failed: failed to pull image "registry.gitlab.com/libvirt/libvirt/ci-:latest" with specified policies [always]: invalid reference format (manager.go:235:0s)
Fixes: 491d918502
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @vendor variable inside virQEMUCapsCPUDefsToModels() is
allocated, but never freed. But there is actually no need for it
to be allocated, because it merely passes a retval of
virCPUGetVendorForModel() (which returns a const string) to
virDomainCapsCPUModelsAdd() (which ten accepts the argument as
const string). Therefore, drop the g_strdup() call and fix the
type of the variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Bump the minimal required version to 0.56.0. Looking into our CI
this is the oldest version we install.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The get_pkgconfig_variable() method is deprecated in 0.56.0 and
we're recommended to use get_variable(pkgconfig : ...) instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The path() method is deprecated in 0.55.0 and we're recommended
to use full_path() instead. Interestingly, we were already doing
do in couple of places, but not all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The source_root() method is deprecated in 0.56.0 and we're
recommended to use project_source_root() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The build_root() method is deprecated in 0.56.0 and we're
recommended to use project_build_root() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option can be used as a shortcut for creating a single XML with
just a CPU model name and no features:
$ virsh hypervisor-cpu-baseline --model Skylake-Server
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Skylake-Server</model>
<feature policy='disable' name='avx512f'/>
<feature policy='disable' name='avx512dq'/>
<feature policy='disable' name='clwb'/>
<feature policy='disable' name='avx512cd'/>
<feature policy='disable' name='avx512bw'/>
<feature policy='disable' name='avx512vl'/>
<feature policy='disable' name='pku'/>
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit "cpu_x86: Disable blockers from unusable CPU models"
(v3.8.0-99-g9c9620af1d) we explicitly disable CPU features reported by
QEMU as usability blockers for a particular CPU model when creating
baseline or host-model CPU definition. When QEMU changed canonical names
for some features (mostly those with '_' in their names), we forgot to
translate the blocker lists to names used by libvirt and the renamed
features would no longer be explicitly disabled in the created CPU model
even if they were reported as blockers by QEMU.
For example, on a host where EPYC CPU model has the following blockers
<blocker name='sha-ni'/>
<blocker name='mmxext'/>
<blocker name='fxsr-opt'/>
<blocker name='cr8legacy'/>
<blocker name='sse4a'/>
<blocker name='misalignsse'/>
<blocker name='osvw'/>
we would fail to disable 'fxsr-opt':
<cpu mode='custom' match='exact'>
<model fallback='forbid'>EPYC</model>
<feature policy='disable' name='sha-ni'/>
<feature policy='disable' name='mmxext'/>
<feature policy='disable' name='cr8legacy'/>
<feature policy='disable' name='sse4a'/>
<feature policy='disable' name='misalignsse'/>
<feature policy='disable' name='osvw'/>
<feature policy='disable' name='monitor'/>
</cpu>
The 'monitor' feature is disabled even though it is not reported as a
blocker by QEMU because libvirt's definition of EPYC includes the
feature while it is missing in EPYC definition in QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API can be used to get usability blockers for an unusable CPU model,
which is not obvious. Let's explicitly document this behavior as it is
now mentioned in the documentation of domain capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch is effectively a no-op, but I wanted to initialize
.getVendorForModel explicitly as implementing this function does not
even make sense on ARM. The CPU models in our CPU map are only used for
describing host CPU in capabilities XML and cannot be used for guest CPU
definition in domain XML anyway. The CPU models listed as supported in
domain capabilities XML are just passed through from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far QEMU driver does not get CPU model vendor from QEMU directly and
it has to ask the CPU driver for the info stored in CPU map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though several CPU models from various vendors are reported as
usable on a given host, user may still want to use only those that match
the host vendor. Currently the only place where users can check the
vendor of each CPU model is our CPU map, which is considered internal
and users should not really be using it directly. So to allow for such
filtering we now advertise the vendor of each CPU model in domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only part of qemuCaps both functions are interested in is the CPU
architecture. Changing them to expect just virArch makes the functions
more reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ppc64 CPU code still has to load and parse the CPU map everytime it
needs to look at it, which can make some operations pretty slow. Other
archs already switched to loading the CPU map once and keeping the
parsed structure in memory. Let's switch ppc64 as well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function always returns 0, we can just return void and make
callers simpler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In recent commit of v8.8.0-41-g41eb0f446c I've suggested during
review to put both xdr_free() calls under error label, assuming
that xdr_free() accepts NULL and thus is a NOP when the control
jumps onto the label even before either of @arg or @ret was
allocated. Well, turns out, xdr_free() does no accept NULL and
thus we have to guard its call. But since @dispatcher is already
set by the time either of the variables is allocated, we can
replace the condition from 'if (dispatcher)' to 'if (arg)' and
'if (ret)'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since they are simply normal RPC messages, the keep alive packets are
subject to the "max_client_requests" limit just like any API calls.
Thus, if a client hits the 'max_client_requests' limit and all the
pending API calls take a long time to complete, it may result in
keep-alives firing and dropping the client connection.
This has been seen by a number of users with the default value of
max_client_requests=5, by issuing 5 concurrent live migration
operations.
By printing a warning message when this happens, admins will be alerted
to the fact that their active clients are exceeding the default client
requests limit.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt provides QMP passthrough APIs for the QEMU driver and these are
exposed in virsh. It is not especially pleasant, however, using the raw
QMP JSON syntax. QEMU has a tool 'qmp-shell' which can speak QMP and
exposes a human friendly interactive shell. It is not possible to use
this with libvirt managed guest, however, since only one client can
attach to the QMP socket at any point in time. While it would be
possible to configure a second QMP socket for a VM, it may not be
an known requirement at the time the guest is provisioned.
The virt-qmp-proxy tool aims to solve this problem. It opens a UNIX
socket and listens for incoming client connections, speaking QMP on
the connected socket. It will forward any QMP commands received onto
the running libvirt QEMU guest, and forward any replies back to the
QMP client. It will also forward back events.
$ virsh start demo
$ virt-qmp-proxy demo demo.qmp &
$ qmp-shell demo.qmp
Welcome to the QMP low-level shell!
Connected to QEMU 6.2.0
(QEMU) query-kvm
{
"return": {
"enabled": true,
"present": true
}
}
Note this tool of course has the same risks as the raw libvirt
QMP passthrough. It is safe to run query commands to fetch information
but commands which change the QEMU state risk disrupting libvirt's
management of QEMU, potentially resulting in data loss/corruption in
the worst case. Any use of this tool will cause the guest to be marked
as tainted as an warning that it could be in an unexpected state.
Since this tool introduces a python dependency it is not desirable
to include it in any of the existing RPMs in libvirt. This tool is
also QEMU specific, so isn't appropriate to bundle with the generic
tools. Thus a new RPM is introduced 'libvirt-clients-qemu', to
contain additional QEMU specific tools, with extra external deps.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This refresh switches the CI for contributors to be triggered by merge
requests. Pushing to a branch in a fork will no longer run CI pipelines,
in order to avoid consuming CI minutes. To regain the original behaviour
contributors can opt-in to a pipeline on push
git push <remote> -o ci.variable=RUN_PIPELINE=1
This variable can also be set globally on the repository, through the
web UI options Settings -> CI/CD -> Variables, though this is not
recommended. Upstream repo pushes to branches will run CI.
The use of containers has changed in this update, with only the upstream
repo creating containers, in order to avoid consuming contributors'
limited storage quotas. A fork with existing container images may delete
them. Containers will be rebuilt upstream when pushing commits with CI
changes to the default branch. Any other scenario with CI changes will
simply install build pre-requisite packages in a throaway environment,
using the ci/buildenv/ scripts. These scripts may also be used on a
contributor's local machines.
With pipelines triggered by merge requests, it is also now possible to
workaround the inability of contributors to run pipelines if they have
run out of CI quota. A project member can trigger a pipeline from the
merge request, which will run in context of upstream, however, note
this should only be done after reviewing the code for any malicious
CI changes.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the seldom used helper in favor of full virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the helper with more features to validate the root XML element name
instead of open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function provided just checking of the root XML node name which can
be easily moved into the caller wich doesn't do that already and
checking of the pointers which is trivial. Remove the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two outstanding uses to virXMLParseFileCtxt as they always
pass a filename and remove the helper macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
