Move the ifaceMacvtapLinkDump and ifaceGetNthParent functions
into virnetdevvportprofile.c since they are specific to that
code. This avoids polluting the headers with the Linux specific
netlink data types
* src/util/interface.c, src/util/interface.h: Move
ifaceMacvtapLinkDump and ifaceGetNthParent functions and delete
remaining file
* src/util/virnetdevvportprofile.c: Add ifaceMacvtapLinkDump
and ifaceGetNthParent functions
* src/network/bridge_driver.c, src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_learnipaddr.c, src/util/virnetdevmacvlan.c:
Remove include of interface.h
Rename ifaceIsVirtualFunction to virNetDevIsVirtualFunction,
ifaceGetVirtualFunctionIndex to virNetDevGetVirtualFunctionIndex
and ifaceGetPhysicalFunction to virNetDevGetPhysicalFunction
* src/util/interface.c, src/util/interface.h: Rename APIs
* src/util/virnetdevvportprofile.c: Update for API rename
Rename the ifaceCheck method to virNetDevValidateConfig and change
so that it always raises an error and returns -1 on error.
* src/util/interface.c, src/util/interface.h: Rename ifaceCheck
to virNetDevValidateConfig
* src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_learnipaddr.c: Update for API rename
To match up with the existing virNetDevSetIPv4Address, rename
ifaceGetIPAddress to virNetDevGetIPv4Address
* util/interface.h, util/interface.c: Rename API
* network/bridge_driver.c: Update for API rename
Rename the ifaceGetIndex method to virNetDevGetIndex and
ifaceGetVlanID to virNetDevGetVLanID. Also change the error
reporting behaviour to always raise errors and return -1 on
failure
* util/interface.c, util/interface.h: Rename ifaceGetIndex
and ifaceGetVLAN
* nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_learnipaddr.c,
nwfilter/nwfilter_learnipaddr.c, util/virnetdevvportprofile.c: Update
for API renames and error handling changes
Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong
* util/interface.c, util/interface.h: Remove
virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
Rename ifaceReplaceMacAddress to virNetDevReplaceMacAddress
and ifaceRestoreMacAddress to virNetDevRestoreMacAddress.
* util/interface.c, util/interface.h, util/virnetdevmacvlan.c:
Rename APIs
Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong
* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
virNetDevMacVLanCreate and virNetDevMacVLanDelete
Rename ifaceMacvtapLinkAdd to virNetDevMacVLanCreate and
ifaceLinkDel to virNetDevMacVLanDelete. Strictly speaking
the latter isn't restricted to macvlan devices, but that's
the only use libvirt has for it.
* util/interface.c, util/interface.h,
util/virnetdevmacvlan.c: Rename APIs
Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile
To make way for renaming the other macvlan creation APIs in
interface.c
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
Rename APIs
Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers
* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
paths & remove conditional compilation
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
Add routines to generate -numa QEMU command line option based on
<numa> ... </numa> XML specifications.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:
<cpu>
...
<topology sockets='2' cores='4' threads='2'/>
<numa>
<cell cpus='0-7' memory='512000'/>
<cell cpus='8-15' memory='512000'/>
</numa>
...
</cpu>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
For whatever reason, the kernel allows you to create a regular
file named /dev/sdc.12345; although this file will disappear the
next time devtmpfs is remounted. If you let libvirt generate
the name of the external snapshot for a disk image originally
using the block device /dev/sdc, then the domain will be rendered
unbootable once the qcow2 file is lost on the next devtmpfs
remount. In this case, the user should have used 'virsh
snapshot-create --xmlfile' or 'virsh snapshot-create-as --diskspec'
to specify the name for the qcow2 file in a sane location, rather
than relying on libvirt generating a name that is most likely to
be wrong. We can help avoid naive mistakes by enforcing that
the user provide the external name for any backing file that is
not a regular file.
* src/conf/domain_conf.c (virDomainSnapshotAlignDisks): Only
generate names if backing file exists as regular file.
Reported by MATSUDA Daiki.
I missed adding virNetServerGetDBusConn() to libvirtd_private.syms
in commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7
libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'
One of the top questions by libvirt users is how to create a host
bridge device so that guests can be directly on the physical
network. There are several example documents that explain how to do
this manually, but following them often results in confusion and
failure. virt-manager does a good job of creating a bridge based on an
existing network device, but not everyone wants to use virt-manager.
This patch adds a new command, iface-bridge that makes it just about
as simple as possible to create a new bridge device based on an
existing ethernet/vlan/bond device (including associating IP
configuration with the bridge rather than the now-attached device),
and start that new bridge up ready for action, eg:
virsh iface-bridge eth0 br0
For symmetry's sake, it also adds a command to remove a device from a
bridge, restoring the IP config to the now-unattached device:
virsh iface-unbridge br0
(I had a short debate about whether to do "iface-unbridge eth0"
instead, but that would involve searching through all bridge devices
for the one that contained eth0, which seems like a bit too much
trouble).
NOTE: These two commands require that the netcf library be available
on the host. Hopefully this will provide some extra incentive for
people using suse, debian, ubuntu, and other similar systems to polish
up (and push downstream) the ports to those distros recently pushed to
the upstream netcf repo by Dan Berrange. Anyone interested in helping
with that effort in any way should join the netcf-devel mailing list
(subscription info at
https://fedorahosted.org/mailman/listinfo/netcf-devel)
During creation of the bridge, it's possible to specify whether or not
the STP protocol should be started up on the bridge and, if so, how
many seconds the bridge should squelch traffic from newly added
devices while learning new topology (defaults are stp='on' and
delay='0', which seems to usually work best for bridges used in the
context of libvirt guests).
There is also an option to not immediately start the bridge (and a
similar option to not immediately start the un-attached device after
destroying the bridge. Default is to start the new device, because in
the case of iface-unbridge not starting is strongly discouraged as it
will leave the system with no network connectivity on that interface
(because it's necessary to destroy/undefine the bridge device before
the unattached device can be defined), and it seemed better to make
the option for iface-bridge behave consistently.
NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard
against any "unexpected" change to configuration, it is advisable to
issue an "virsh iface-begin" command before starting any interface
config changes, and "virsh iface-commit" only after you've verified
that everything is working as you expect. If something goes wrong,
you can always run "virsh iface-rollback" or reboot the system (which
should automatically do iface-rollback).
Aside from adding the code for these two functions, and the two
entries into the command table, the only other change to virsh.c was
to add the option name to vshCommandOptInterfaceBy(), because the
iface-unbridge command names its interface option as "bridge".
virsh.pod has also been updated with short descriptions of these two
new commands.
Due to the asynchronous nature of streams, we might continue to
receive some stream packets from the server even after we have
shutdown the stream on the client side. These should be discarded
silently, rather than raising an error in the RPC layer.
* src/rpc/virnetclient.c: Discard stream data silently
Very occasionally the sequence of events from poll would result
in getting a HANGUP on its own, instead of a HANGUP+READABLE
at the same time. In the former case we would send back an error
event to the client, but never send the empty packet to indicate
EOF.
Add a new virNetClientSendNonBlock which returns 2 on
full send, 1 on partial send, 0 on no send, -1 on error
If a partial send occurs, then a subsequent call to any
of the virNetClientSend* APIs will finish any outstanding
I/O.
TODO: the virNetClientEvent event handler could be used
to speed up completion of partial sends if an event loop
is present.
* src/rpc/virnetsocket.h, src/rpc/virnetsocket.c: Add new
virNetSocketHasPendingData() API to test for cached
data pending send.
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add new
virNetClientSendNonBlock() API to send non-blocking API
Stop multiplexing virNetClientSend for two different purposes,
instead add virNetClientSendWithReply and virNetClientSendNoReply
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Replace
virNetClientSend with virNetClientSendWithReply and
virNetClientSendNoReply
* src/rpc/virnetclientprogram.c, src/rpc/virnetclientstream.c:
Update for new API names
Remove some duplication by pulling the code for passing the
buck out into a helper method
* src/rpc/virnetclient.c: Introduce virNetClientIOEventLoopPassTheBuck
Instead of inferring whether the buck is held from the waitDispatch
pointer, use an explicit 'bool haveTheBuck' field
* src/rpc/virnetclient.c: Explicitly track the buck
Directly messing around with the linked list is potentially
dangerous. Introduce some helper APIs to deal with list
manipulating the list
* src/rpc/virnetclient.c: Create linked list handlers
This improves the support for qemu rbd devices by adding support for a few
key features (e.g., authentication) and cleaning up the way in which
rbd configuration options are passed to qemu.
An <auth> member of the disk source xml specifies how librbd should
authenticate. The username attribute is the Ceph/RBD user to authenticate as.
The usage or uuid attributes specify which secret to use. Usage is an
arbitrary identifier local to libvirt.
The old RBD support relied on setting an environment variable to
communicate information to qemu/librbd. Instead, pass those options
explicitly to qemu. Update the qemu argument parsing and tests
accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
I missed adding libvirt_driver_remote.la to libvirtd_LDADD in
commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7
libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'
Replacing the strchr call with two variables through a strstr call.
Calling strchr with two variables triggers a gcc 4.3/4.4
bug when used in combination with -Wlogical-op and at least -O1.
The ifaceSetMac and ifaceGetMac APIs duplicate the functionality
of the virNetDevSetMAC and virNetDevGetMAC APIs, but returning
errno's instead of raising errors.
* src/util/interface.c, src/util/interface.h: Remove
ifaceSetMac and ifaceGetMac APIs, adjusting callers
for new error behaviour
The ifaceUp, ifaceDown, ifaceCtrl & ifaceIsUp APIs can be replaced
with calls to virNetDevSetOnline and virNetDevIsOnline
* src/util/interface.c, src/util/interface.h: Delete ifaceUp,
ifaceDown, ifaceCtrl & ifaceIsUp
* src/nwfilter/nwfilter_gentech_driver.c, src/util/macvtap.c:
Update to use virNetDevSetOnline and virNetDevIsOnline
Move the virNetDevSetName and virNetDevSetNamespace APIs out
of LXC's veth.c and into virnetdev.c.
Move the remaining content of the file to src/util/virnetdevveth.c
* src/lxc/veth.c: Rename to src/util/virnetdevveth.c
* src/lxc/veth.h: Rename to src/util/virnetdevveth.h
* src/util/virnetdev.c, src/util/virnetdev.h: Add
virNetDevSetName and virNetDevSetNamespace
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update include paths
The src/lxc/veth.c file contains APIs for managing veth devices,
but some of the APIs duplicate stuff from src/util/virnetdev.h.
Delete thed duplicate APIs and rename the remaining ones to
follow virNetDevVethXXXX
* src/lxc/veth.c, src/lxc/veth.h: Rename APIs & delete duplicates
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update for API renaming
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
The virtual port profile parsing/formatting APIs do not
correctly handle unknown profile type strings/numbers.
They behave as a no-op, instead of raising an error
* src/util/network.c, src/util/network.h: Fix error
handling of port profile APIs
* src/conf/domain_conf.c, src/conf/network_conf.c: Update
for API changes
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
Hi
Commit c31d23a787 removed the "conn"
parameter from qemuPhysIfaceConnect(), but it's still used if
WITH_MACVTAP is false. Also, it's still mentioned in the comment
above the function:
/**
* qemuPhysIfaceConnect:
* @def: the definition of the VM (needed by 802.1Qbh and audit)
* @conn: pointer to virConnect object
* @driver: pointer to the qemud_driver
* @net: pointer to he VM's interface description with direct device type
* @qemuCaps: flags for qemu
*
* Returns a filedescriptor on success or -1 in case of error.
*/
int
qemuPhysIfaceConnect(virDomainDefPtr def,
struct qemud_driver *driver,
virDomainNetDefPtr net,
virBitmapPtr qemuCaps,
enum virVMOperationType vmop)
{
int rc;
#if WITH_MACVTAP
[...]
#else
(void)def;
(void)conn;
(void)net;
(void)qemuCaps;
(void)driver;
(void)vmop;
qemuReportError(VIR_ERR_INTERNAL_ERROR,
"%s", _("No support for macvtap device"));
rc = -1;
#endif
return rc;
}
--
Michael Wood <esiotrot@gmail.com>
From f4fc43b4111a4c099395c55902e497b8965e2b53 Mon Sep 17 00:00:00 2001
From: Michael Wood <esiotrot@gmail.com>
Date: Sat, 12 Nov 2011 13:37:53 +0200
Subject: [PATCH] Fix build without MACVTAP.
which would blow away all volumes. Honor VIR_STORAGE_POOL_BUILD_OVERWRITE
to force a rebuild.
This was caught by libvirt-tck's storage/110-disk-pool.t.
Qemu will be the first driver to make use of a typed string in the
next round of additions. Separate out the trivial addition.
* src/qemu/qemu_driver.c (qemudSupportsFeature): Advertise feature.
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuGetSchedulerParametersFlags, qemudDomainBlockStatsFlags):
Allow typed strings flag where trivially supported.
Send and receive string typed parameters across RPC. This also
completes the back-compat mentioned in the previous patch - the
only time we have an older client talking to a newer server is
if RPC is in use, so filtering out strings during RPC prevents
returning an unknown type to the older client.
* src/remote/remote_protocol.x (remote_typed_param_value): Add
another union value.
* daemon/remote.c (remoteDeserializeTypedParameters): Handle
strings on rpc.
(remoteSerializeTypedParameters): Likewise; plus filter out
strings when replying to older clients. Adjust callers.
* src/remote/remote_driver.c (remoteFreeTypedParameters)
(remoteSerializeTypedParameters)
(remoteDeserializeTypedParameters): Handle strings on rpc.
* src/rpc/gendispatch.pl: Properly clean up typed arrays.
* src/remote_protocol-structs: Update.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
