CPU features are not supported on non-x86 and hasFeatures will be NULL.
This patch is to remove CPU features functions calling to avoid errors.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This patch changes virFileLoopDeviceOpen() to use the new loop-control
device to allocate a new loop device. If this behavior is unsupported
we fall back to the previous method of searching /dev for a free device.
With this patch you can start as many image based LXC domains as you
like (well almost).
Fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=995543
Right now, securityfs is disallowed to be mounted in non-initial
user namespace, so we must avoid trying to mount securityfs in
a container which has user namespace enabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The ESX code has a method esxVI_Alloc which would call
virAllocN directly, instead of using the VIR_ALLOC_N
macro. Remove this method and make the callers just
use VIR_ALLOC as is normal practice.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Delete the USB controller check from the USB Device checklist in
virDomainDeviceIsUSB as USB controller is a PCI device rather than
a USB one.
Signed-off-by: Liu Ji <jeremy.liu@huawei.com>
The s390, ppc and arm CPU drivers never set the 'arch' field
in their impl of cpuArchNodeData. This leads to error messages
being reported from cpuDataFree later, due to trying to use
VIR_ARCH_NONE.
#0 virRaiseErrorFull (filename=filename@entry=0x76f94434 "cpu/cpu.c", funcname=funcname@entry=0x76f942dc <__FUNCTION__.18096> "cpuGetSubDriver", linenr=linenr@entry=58,
domain=domain@entry=31, code=code@entry=1, level=level@entry=VIR_ERR_ERROR, str1=0x76f70e18 "internal error: %s",
str2=str2@entry=0x7155f2ec "undefined hardware architecture", str3=str3@entry=0x0, int1=int1@entry=-1, int2=int2@entry=-1, fmt=0x76f70e18 "internal error: %s")
at util/virerror.c:646
#1 0x76e682ea in virReportErrorHelper (domcode=domcode@entry=31, errorcode=errorcode@entry=1, filename=0x76f94434 "cpu/cpu.c",
funcname=0x76f942dc <__FUNCTION__.18096> "cpuGetSubDriver", linenr=linenr@entry=58, fmt=0x76f7e7e4 "%s") at util/virerror.c:1292
#2 0x76ed82d4 in cpuGetSubDriver (arch=<optimized out>) at cpu/cpu.c:57
#3 cpuGetSubDriver (arch=VIR_ARCH_NONE) at cpu/cpu.c:51
#4 0x76ed8818 in cpuDataFree (data=data@entry=0x70c22d78) at cpu/cpu.c:216
#5 0x716aaec0 in virQEMUCapsInitCPU (arch=VIR_ARCH_ARMV7L, caps=0x70c29a08) at qemu/qemu_capabilities.c:867
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
No need to open code now that we have a nice function.
Interestingly, our virStringFreeList function is typed correctly
(a malloc'd list of malloc'd strings is NOT const, whether at the
point where it is created, or at the point where it is cleand up),
so using it with a 'const char **' argument would require a cast
to keep the compiler. I chose instead to remove const from code
even where we don't modify the argument, just to avoid the need
to cast.
* src/qemu/qemu_command.h (qemuParseCommandLine): Drop declaration.
* src/qemu/qemu_command.c (qemuParseProcFileStrings)
(qemuStringToArgvEnv): Don't force malloc'd result to be const.
(qemuParseCommandLinePid, qemuParseCommandLineString): Simplify
cleanup.
(qemuParseCommandLine, qemuFindEnv): Drop const-correctness to
avoid the need to cast in callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
In commit 991270db99 I've used virDomainNetGetActualHostdev() to get
the actual hostdev from a network when removing the network from the
list to avoid leaving the hostdev in the list. I didn't notice that this
function doesn't check if the actual network is allocated and
dereferences it. This crashes the daemon when cleaning up a domain
object in early startup phases when the actual network definition isn't
allocated. When the actual definition isn't present, the hostdev that
might correspond to it won't be present anyways so it's safe to return
NULL.
Thanks to Cole Robinson for noticing this problem.
No need to check if privileged when reading hostsysinfo, since
that check was already done in libxlDriverShouldLoad(). The
libxl driver fails to load if not privileged.
John Ferlan reported the following Coverity warning:
In libxlDomainCoreDump() Coverity has noted a FORWARD_NULL reference:
2004 if ((flags & VIR_DUMP_CRASH) && !vm->persistent) {
2005 virDomainObjListRemove(driver->domains, vm);
(20) Event assign_zero: Assigning: "vm" = "NULL".
Also see events: [var_deref_model]
2006 vm = NULL;
2007 }
2008
2009 ret = 0;
2010
2011 cleanup_unpause:
(21) Event var_deref_model: Passing null pointer "vm" to function
"virDomainObjIsActive(virDomainObjPtr)", which dereferences it. [details]
Also see events: [assign_zero]
2012 if (virDomainObjIsActive(vm) && paused) {
2013 if (libxl_domain_unpause(priv->ctx, dom->id) != 0) {
2014 virReportError(VIR_ERR_INTERNAL_ERROR,
Removing the vm from domain obj list and setting it to NULL can be
done in the previous 'if (flags & VIR_DUMP_CRASH)' conditional. Fix
the Coverity warning by ensuring vm is not NULL before testing if it
is still active.
daemon/Makefile.am installs a .policy file if WITH_LIBVIRTD and
WITH_POLKIT are both set. src/Makefile.am, on the other hand,
installs a .policy file if WITH_POLKIT1 is set, but without checking
WITH_LIBVIRTD. When running 'make rpm' with client_only manually
set, on a Fedora 19 box, that leads to a failure:
RPM build errors:
Installed (but unpackaged) file(s) found:
/usr/share/polkit-1/actions/org.libvirt.api.policy
Fix it by adding another conditional.
* src/Makefile.am (polkitaction_DATA): Make conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
When virGetUserEnt() and virGetGroupEnt() fail due to the uid or gid not
existing on the machine they'll print a message like:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655': Success
The success at the end is a bit confusing. This changes it to:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655'
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'uuid' field in virDomainDefPtr is not a pointer, it is a
fixed length array. Calling VIR_ALLOC on it is thus wrong and
leaks memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 50348e6edf reused the code to remove the hostdev portion of a
network definition on multiple places but forgot to take into account
that sometimes the "actual" network is passed and in some cases the
parent of that.
This patch uses the virDomainNetGetActualHostdev() helper to acquire the
correct pointer all the time while removing the hostdev portion from the
list.
https://bugzilla.redhat.com/show_bug.cgi?id=999352
Since commit v1.0.5-56-g449e6b1 (Pull parsing of migration xml up into
QEMU driver APIs) any attempt to rename a domain during migration fails
with the following error message:
internal error Incoming cookie data had unexpected name DOM vs DOM2
This is because migration cookies always use the original domain name
and the mentioned commit failed to propagate the name back to
qemuMigrationPrepareAny.
Now that most fields of libxlDriverPrivate struct are immutable
or self-locking, there is no need to acquire the driver lock in
much of the libxl driver.
The libxlDriverPrivate struct contains an variety of data with
varying access needs. Similar to the QEMU and LXC drivers,
move all the static config data into a dedicated libxlDriverConfig
object. The only locking requirement is to hold the driver lock
while obtaining an instance of libxlDriverConfig. Once a reference
is held on the config object, it can be used completely lockless
since it is immutable.
libxlDomainGetInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain. Switch to using the per-domain
libxl ctx.
libxlMakeDomCreateInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain. Switch to using the per-domain
libxl ctx.
libxl version info is static data as far as the libxl driver
is concerned, so retrieve this info when the driver is initialized
and stash it in the libxlDriverPrivate object. Subsequently use
the stashed info instead of repeatedly calling libxl_get_version_info().
Detect early on in libxl driver initialization if the driver
should be loaded at all, avoiding needless initialization steps
that only have to be undone later. While at it, move the
detection to a helper function to improve readability.
After detecting that the driver should be loaded, subsequent
failures such as initializing the log stream, allocating libxl
ctx, etc. should be treated as failure to initialize the driver.
Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files. This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.
New coverity installation determined that the muliple if condition for
"*Alloc" and "*AppendToList" could fail during AppendToList thus leaking
memory.
Currently, kernel supports up to 8 queues for a multiqueue tap device.
However, if user tries to enter a huge number (e.g. one million) the tap
allocation fails, as expected. But what is not expected is the log full
of warnings:
warning : virFileClose:83 : Tried to close invalid fd 0
The problem is, upon error we iterate over an array of FDs (handlers to
queues) and VIR_FORCE_CLOSE() over each item. However, the array is
pre-filled with zeros. Hence, we repeatedly close stdin. Ouch.
But there's more. The queues allocation is done in virNetDevTapCreate()
which cleans up the FDs in case of error. Then, its caller, the
virNetDevTapCreateInBridgePort() iterates over the FD array and tries to
close them too. And so does qemuNetworkIfaceConnect() and
qemuBuildInterfaceCommandLine().
According to VMWare's documentation 'cdrom-raw' is an acceptable value
for deviceType for a CD-ROM drive. The documentation states that the VMX
configuration for a CD-ROM deviceType is as follows:
ide|scsi(n):(n).deviceType = "cdrom-raw|atapi-cdrom|cdrom-image"
From the documentation it appears the following is true:
- cdrom-image = Provides the ISO to the VM
- atapi-cdrom = Provides a NEC emulated ATAPI CD-ROM on top of the host
CD-ROM
- cdrom-raw = Passthru for a host CD-ROM drive. Allows CD-R burning from
within the guest.
A CD-ROM prior to this patch would always provide an 'atapi-cdrom' is
modeled as:
<disk type='block' device='cdrom'>
<source dev='/dev/scd0'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
This patch allows the 'device' attribute to be set to 'lun' for a raw
acccess CD-ROM such as:
<disk type='block' device='lun'>
<source dev='/dev/scd0'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
Sometimes a serial port might not be actually wired to a device when the
user does not have the VM powered on and we should not consider this a
fatal error.
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
This corresponds to '-sd' and '-drive if=sd' on the qemu command line.
Needed for many ARM boards which don't provide any other way to
pass in storage.
QEMU ARM boards don't give us any way to explicitly wire in
a -chardev, so use the old style -serial options.
Unfortunately this isn't as simple as just turning off the CHARDEV flag
for qemu-system-arm, as upcoming virtio support _will_ use device/chardev.
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.
A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.
Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.
Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
