QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The following XML is the recommended default clock configuration for
qemu:
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
However we weren't testing any of those timer elements.
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.
The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.
Sample offending configuration:
<devices>
...
<rng model='virtio'>
<backend model='egd' type='unix'>
<source mode='bind' service='1024'/>
</backend>
</rng>
</devices>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196
This resolves one of the issues listed in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
00:1E.0 is the location of this controller on at least some actual Q35
hardware, so we try to replicate the placement. The bridge should work
just as well in any other location though, so if 00:1E.0 isn't
available, just allow it to be auto-assigned anywhere appropriate.
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1008903
The Q35 machinetype has an implicit SATA controller at 00:1F.2 which
isn't given the "expected" id of ahci0 by qemu when it's created. The
original suggested solution to this problem was to not specify any
controller for the disks that use the default controller and just
specify "unit=n" instead; qemu should then use the first IDE or SATA
controller for the disk.
Unfortunately, this "solution" is ignorant of the fact that in the
case of SATA disks, the "unit" attribute in the disk XML is actually
*not* being used for the unit, but is instead used to specify the
"bus" number; each SATA controller has 6 buses, and each bus only
allows a single unit. This makes it nonsensical to specify unit='n'
where n is anything other than 0. It also means that the only way to
connect more than a single device to the implicit SATA controller is
to explicitly give the bus names, which happen to be "ide.$n", where
$n can be replaced by the disk's "unit" number.
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
Commit ef5d51d fixed a crash for numatune with auto placement and
nodeset specified:
<numatune>
<memory mode='preferred' placement='auto' nodeset='0'/>
</numatune>
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.
A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.
Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.
Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
<controller type='pci' index='0' model='pci-root'>
<pcihole64 unit='KiB'>1048576</pcihole64>
</controller>
It can be used to adjust (or disable) the size of the 64-bit
PCI hole. The size attribute is in kilobytes (different unit
can be specified on input), but it gets rounded up to
the nearest GB by QEMU.
Disabling it will be needed for guests that crash with the
64-bit PCI hole (like Windows XP), see:
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
We had been setting the device alias in the devinceinfo for pci
controllers to "pci%u", but then hardcoding "pci.%u" when creating the
device address for other devices using that pci bus. This all worked
just fine until we encountered the built-in "pcie.0" bus (the PCIe
root complex) in Q35 machines.
In order to create the correct commandline for this one case, this
patch:
1) sets the alias for PCI controllers correctly, to "pci.%u" (or
"pcie.%u" for the pcie-root controller)
2) eliminates the hardcoded "pci.%u" for pci controllers when
generatuing device address strings, and instead uses the controller's
alias.
3) plumbs a pointer to the virDomainDef all the way down to
qemuBuildDeviceAddressStr. This was necessary in order to make the
aliase of the controller *used by a device* available (previously
qemuBuildDeviceAddressStr only had the deviceinfo of the device
itself, *not* of the controller it was connecting to). This made for a
larger than desired diff, but at least in the future we won't have to
do it again, since all the information we could possibly ever need for
future enhancements is in the virDomainDef. (right?)
This should be done for *all* controllers, but for now we just do it
in the case of PCI controllers, to reduce the likelyhood of
regression.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
The implicit IDE, USB, and video controllers provided by the PIIX3
chipset in the pc-* machinetypes are not present on other
machinetypes, so we shouldn't be doing the special checking for
them. This patch places those validation checks into a separate
function that is only called for machine types that have a PIIX3 chip
(which happens to be the i440fx-based pc-* machine types).
One qemuxml2argv test data file had to be changed - the
pseries-usb-multi test had included a piix3-usb-uhci device, which was
being placed at a specific address, and also had slot 2 auto reserved
for a video device, but the pseries virtual machine doesn't actually
have a PIIX3 chip, so even if there was a piix3-usb-uhci driver for
it, the device wouldn't need to reside at slot 1 function 2. I just
changed the .argv file to have the generic slot info for the two
devices that results when the special PIIX3 code isn't executed.
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
The alias for hostdevs of type SCSI can be too long for QEMU if
larger LUNs are encountered. Here's a real life example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1088634913'/>
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
this results in a too long drive id, resulting in QEMU yelling
Property 'scsi-generic.drive' can't find value 'drive-hostdev-scsi_host0-0-19-1088634913'
This commit changes the alias back to the default hostdev$(index)
scheme.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Long lines are harder to read and harder to diff; in fact, if lines get
too long (> 1000 bytes), it starts causing issues where git send-email
refuses to send patches for the file. I've cleaned up the tests
directory in the past (see commits bd6c46f, 3b750d1), but new long
lines have been introduced in the meantime.
Why 90 instead of 80? Because there were too many tests on the fringe
edge, and I didn't want to edit that many files.
Add a syntax check to prevent future long lines.
* cfg.mk (sc_prohibit_long_lines): New rule.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any
file with content longer than 90 columns.
* tests/storagevolxml2argvdata/*.argv: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The test is currently testing just device update function. However,
chardev hotplug is implemented just for device attach and detach. This
fact means, the test needs to be rewritten (the majority of the code is
still shared). Moreover, we are now able to pass VM among multiple test
runs. So for instance, while we add a device in the first run, we can
remove it in the second run.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
As my punishment for the break in 7f15ebc7 (fixed in 752596b5dd) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).
Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.
"on" maps to "unmap", "off" maps to "ignore":
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
