We still default to bhyveloader(1) if no explicit bootloader
configuration is supplied in the domain.
If the /domain/bootloader looks like grub-bhyve and the user doesn't
supply /domain/bootloader_args, we make an intelligent guess and try
chainloading the first partition on the disk (or a CD if one exists,
under the assumption that for a VM a CD is likely an install source).
Caveat: Assumes the HDD boots from the msdos1 partition. I think this is
a pretty reasonable assumption for a VM. (DrvBhyve with Bhyveload
already assumes that the first disk should be booted.)
I've tested both HDD and CD boot and they seem to work.
Use the device type name if we know it instead of its number,
even if we can't hotplug it:
qemuMonitorJSONAttachCharDevCommand:6094 : operation failed: Unsupported
char device type '10'
virDomainChrSourceDefIsEqual should return 'true' for
identical SPICEVMC chardevs, and those that have no source
specification.
After this change, a failed hotplug no longer leaves a stale
pointer in the domain definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1162097
If the memory mode is specified as 'strict' and with one node, we
get the following error when starting domain.
error: Unable to write to '$cgroup_path/cpuset.mems': Device or resource busy
XML is configured with numatune as follows:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
It's broken by Commit 411cea638f
which moved qemuSetupCgroupForEmulator() before setting cpuset.mems
in qemuSetupCgroupPostInit.
Directory '$cgroup_path/emulator/' is created in qemuSetupCgroupForEmulator.
But '$cgroup_path/emulator/cpuset.mems' it not set and has a default value
(all nodes, such as 0-1). Then we setup '$cgroup_path/cpuset.mems' to the
nodemask (in this case it's '0') in qemuSetupCgroupPostInit. It must fail.
This patch makes '$cgroup_path/emulator/cpuset.mems' is set before
'$cgroup_path/cpuset.mems'. The action is similar with that in
qemuDomainSetNumaParamsLive.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
If the memory mode in numatune is not 'strict', we should not setup
cpuset.mems. Before commit 1a7be8c600
we have checked the memory mode in virDomainNumatuneGetNodeset. This
patch adds the check as before.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
If the memory mode in numatune is specified as 'preferred' with one node
(such as nodeset='0'), domain's memory is not all in node 0 absolutely.
Assumption that node 0 doesn't have enough memory, memory can be allocated
on node 1 when qemu process startup. Then if we set cpuset.mems to '0',
it may invoke OOM.
Commit 1a7be8c600 changed the former logic of
checking memory mode in virDomainNumatuneGetNodeset. This patch adds the
check as before.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
This patch fixes the following issues.
1) When an invalid wwn is introduced, libvirt reports
"Malformed wwn: %s". The template won't be replaced.
2) "target" option for dompmsuspend and "xml" option for
save-image-define are required options and should use
VSH_OT_DATA instead of VSH_OT_STRING as an option type.
3) A typo.
Signed-off-by: Hao Liu <hliu@redhat.com>
Coverity found out that commit cd490086 caused a possible NULL pointer
dereference. This is due to the fact, that phyp_driver is NULL at the
time of closing the socket, instead of connection_data, which kept the
socket before the mentioned commit, could not be NULL.
However, internal_socket is still the local socket that can be
closed, even unconditionally, if we initialize it to -1.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Check the arability of the options with the current qemu binary,
add them in the varable opt if yes, print a message if not.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Detect if the the qemu binary currently in use support the bps_max option,
If yes add it to the command, if not, just ignore the option.
We don't print error here, because the check for invalide arguments
has alerady been made in qemu_driver.c
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the capability to detect if the qemu binary have the capability
to use bps_max and friends
Add a value in the enum virQEMUCapsFlags for the qemu capability.
Set it with virQEMUCapsSet if the binary suport bps_max and they friends.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
nodeSetMemoryParameters() will call nodeSetMemoryParameterValue()
to set parameters. But it just filter the return code '-2' as
failure. Indeed we should report error when rc is negative.
https://bugzilla.redhat.com/show_bug.cgi?id=1161541
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
CPU numa topology implicitly allows memory specification in 'KiB'.
Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.
<numa>
<cell cpus='0-3' memory='1024' unit='MiB' />
<cell cpus='4-7' memory='1024' unit='MiB' />
</numa>
Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 01b4de2b9f abstracts virDomainParseMemory()
for use by other functions in domain_conf.c
Extend the same for use, for functions outside of this file.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Store version numbers in this format
version = 1000000 * major + 1000 * minor + micro
produced by virParseVersionString instead of dedicated enums.
Split the complex esxVI_ProductVersion enum into a simpler
esxVI_ProductLine enum and a product version number.
Relax API and product version number checks to accept everything that
is equal or greater than the supported minimum version. VMware ESX
went through 3 major versions and the vSphere API always stayed
backward compatible. This commit assumes that this will also be true
for future VMware ESX versions.
Also reword error messages in esxConnectTo* to say what was expected
and what was found instead (suggested by Richard W.M. Jones).
As reviewing patches upstream it occurred to me, that we have two
functions doing nearly the same: virDomainParseMemory which
expects XML in the following format:
<memory unit='MiB'>1337</memory>
The other function being virDomainHugepagesParseXML expecting the
following format:
<someElement size='1337' unit='MiB'/>
It wouldn't matter to have two functions handle two different
scenarios like this if we could only not copy code that handles
32bit arches around. So this code merges the common parts into
one by inventing new @units_xpath argument to
virDomainParseMemory which allows overriding the default location
of @unit attribute in XML. With this change both scenarios above
can be parsed with virDomainParseMemory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If detect_scsi_host_caps reports errors but keeps libvirtd going on
startup, the user is misled by the error messages. Transforming them
into warning still shows the problems, but indicates this is not fatal.
Introduced by commit c63ef0452b, when nodeset is NULL, validation will
pass in virNumaSetupMemoryPolicy, but virBitmapNextSetBit must ensure
bitmap is not NULL, otherwise that might cause a segmentation fault.
This patch fixes it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
The shared netcf driver is stateful and inside the daemon so
there is no need to use the networkPrivateData field to get the
driver handle. Just access the global driver handle directly.
The shared network driver is stateful and inside the daemon so
there is no need to use the networkPrivateData field to get the
driver handle. Just access the global driver handle directly.
Many places already directly accessed the global driver handle
in any case, so the code could never work without relying on
this.
The shared storage driver is stateful and inside the daemon so
there is no need to use the storagePrivateData field to get the
driver handle. Just access the global driver handle directly.
Since the secondary drivers are only active when the primary
driver is also the Test driver, there is no need to use the
different type specific privateData fields.
Since the secondary drivers are only active when the primary
driver is also the Parallels driver, there is no need to use the
different type specific privateData fields. The object that was
being stored in the storagePrivateData can easily be kept in the
parallelsConn struct instead.
For inexplicable reasons the phyp driver defined two separate
structs for holding its private data. One it keeps in privateData
and the other it keeps in networkPrivateData. It uses them both
from all API driver methods. Merge the two separate structs
into one to remove this horrible abuse.
Since the secondary drivers are only active when the primary
driver is also the Hyper-V driver, there is no need to use the
different type specific privateData fields.
Since the secondary drivers are only active when the primary
driver is also the ESX driver, there is no need to use the
different type specific privateData fields.
Since the secondary drivers are only active when the primary
driver is also the remote driver, there is no need to use the
different type specific privateData fields.
The remote driver has had a long term hack to deal with the fact
that the old Xen driver worked outside libvirtd, but the rest
of the drivers worked inside. So you could have a local hypervisor
driver but everything else go via the remote driver. The Xen driver
long ago moved inside libvirtd, so this hack is no longer needed.
Thus we should open use the remote driver for secondary drivers
if the primary driver is already the remote driver.
As documented in https://bugzilla.redhat.com/show_bug.cgi?id=1161358,
the ACL attribute should be named: interface_macaddr
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This introduces a testcase for PowerPC compat mode cpu specification.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add documentation to explain how compat-mode can be invoked with libvirt
running on PowerPC architecture.
It also mentions that this change is available libvirt 1.2.11 onwards.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IBM Power processors differ uniquely across generations (such as power6,
power7, power8). Each generation signifies a new PowerISA version
that exhibits features unique to that generation.
The higher 16 bits of PVR for IBM Power processors encode the CPU
generation, while the CPU chip (sub)version is encoded in lower 16 bits.
For all practical purposes of launching a VM, we care about the
generation which the vCPU will belong to, and not specifically the chip
version. This patch updates the libvirt PVR check to reflect this
relationship. It allows libvirt to select the right CPU generation
in case the exact match for a a specific CPU is not found.
Hence, there will no longer be a need to add each PowerPC CPU model to
cpu_map.xml; just adding entry for the matching ISA generation will
suffice.
It also contains changes to cpu_map.xml since processor generations
as understood by QEMU compat mode go as "power6", "power7" or "power8"
[Reference : QEMU commit 8dfa3a5e85 ]
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
PowerISA allows processors to run VMs in binary compatibility ("compat")
mode supporting an older version of ISA. QEMU has recently added support to
explicitly denote a VM running in compatibility mode through commit 6d9412ea
& 8dfa3a5e85. Now, a "compat" mode VM can be run by invoking this qemu
commandline on a POWER8 host: -cpu host,compat=power7.
This patch allows libvirt to exploit cpu mode 'host-model' to describe this
new mode for PowerKVM guests. For example, when a user wants to request a
power7 vm to run in compatibility mode on a Power8 host, this can be
described in XML as follows :
<cpu mode='host-model'>
<model>power7</model>
</cpu>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This adds support for PowerPC Little Endian architecture.,
and allows libvirt to spawn VMs based on 'ppc64le' architecture.
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since libvirt.h was split into several files, it is impossible to
compile anything against a VPATH-built libvirt. In VPATH, only libvirt.h
is in build/include/libvirt while all other libvirt-*.h files are in
source/include/libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
One of the latest patches (9a8fc3efc2) introduced call of
geteuid(). However, not all systems have the function
implemented, e.g. mingw. Therefore, we fail to build on those
system. The fix consist of including virutil.h which defines
geteuid in needed. Sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160084
As of b6d4dad1 (1.2.5) libvirt keeps track if domain disks have been
frozen. However, this falls into that set of information which don't
survive domain restart. Therefore, we need to clear the flag upon some
state transitions. Moreover, once we clear the flag we must update the
status file too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extending the iothread disk support from pci to pci and ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Finding the right type of disk should check for virtio as bus and
pci as device address type.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
