Allow getting the raw data from query-blockstats, so that we can use it
to detect the backing chain later on.
Reviewed-by: Eric Blake <eblake@redhat.com>
On domain startup, bind host or bind service can be omitted
and we will format a working command line.
Extend this to hotplug as well and specify the service to QEMU
even if the host is missing.
https://bugzilla.redhat.com/show_bug.cgi?id=1452441
With the current logic, we only free @tlsalias as part of the error
label and would have to free it explicitly earlier in the code. Convert
the error label to cleanup, so that we have only one sink, where we
handle all frees. Since JSON object append operation consumes pointers,
make sure @backend is cleared before we hit the cleanup label.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
commit a8eba5036 added further checking of the guest shutdown cause, but
this enhancement is available since qemu 2.10, causing a crash because
of a NULL pointer dereference on older qemus.
Thread 1 "libvirtd" received signal SIGSEGV, Segmentation fault.
0x00007ffff72441af in virJSONValueObjectGet (object=0x0,
key=0x7fffd5ef11bf "guest")
at util/virjson.c:769
769 if (object->type != VIR_JSON_TYPE_OBJECT)
(gdb) bt
0 in virJSONValueObjectGet
1 in virJSONValueObjectGetBoolean
2 in qemuMonitorJSONHandleShutdown
3 in qemuMonitorJSONIOProcessEvent
4 in qemuMonitorJSONIOProcessLine
5 in qemuMonitorJSONIOProcess
6 in qemuMonitorIOProcess
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Migration with old QEMU which does not support query-migrate-parameters
would fail because the QMP command is called unconditionally since the
introduction of TLS migration. Previously it was only called if the user
explicitly requested a feature which uses QEMU migration parameters. And
even then the situation was not ideal, instead of reporting an
unsupported feature we'd just complain about missing QMP command.
Trivially no migration parameters are supported when
query-migrate-parameters QMP command is missing. There's no need to
report an error if it is missing, the callers will report better error
if needed.
https://bugzilla.redhat.com/show_bug.cgi?id=1441934
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For certain kinds of panic notifiers (notably hyper-v) qemu is able to
report some data regarding the crash passed from the guest.
Make the data accessible to the callback in qemu so that it can be
processed further.
To allow matching the node names gathered via 'query-named-block-nodes'
we need to query and then use the top level nodes from 'query-block'.
Add the data to the structure returned by qemuMonitorGetBlockInfo.
Add monitor tooling for calling query-named-block-nodes. The monitor
returns the data as the raw JSON array that is returned from the
monitor.
Unfortunately the logic to extract the node names for a complete backing
chain will be so complex that I won't be able to extract any meaningful
subset of the data in the monitor code.
The event is fired when a given block backend node (identified by the
node name) experiences a write beyond the bound set via
block-set-write-threshold QMP command. This wires up the monitor code to
extract the data and allow us receiving the events and the capability.
Add the fields to support setting tls-creds and tls-hostname during
a migration (either source or target). Modify the query migration
function to check for the presence and set the field for future
consumers to determine which of 3 conditions is being met (NULL,
present and set to "", or present and sent to something). These
correspond to qemu commit id '4af245dc3' which added support to
default the value to "" and allow setting (or resetting) to ""
in order to disable. This reset option allows libvirt to properly
use the tls-creds and tls-hostname parameters.
Modify code paths that either allocate or use stack space in order
to call qemuMigrationParamsClear or qemuMigrationParamsFree for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
qemuMonitorGetGuestCPU can now optionally create CPU data from
filtered-features in addition to feature-words.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The static CPU model expansion is designed to return only canonical
names of all CPU properties. To maintain backwards compatibility libvirt
is stuck with different spelling of some of the features, but we need to
use the full expansion to get the additional spellings. In addition to
returning all spelling variants for all properties the full expansion
will contain properties which are not guaranteed to be migration
compatible. Thus, we need to combine both expansions. First we need to
call the static expansion to limit the result to migratable properties.
Then we can use the result of the static expansion as an input to the
full expansion to get both canonical names and their aliases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While query-cpu-model-expansion returns only boolean features on s390,
but x86_64 reports some integer and string properties which we are
interested in.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The CPU driver provides APIs to create and free virCPUDataPtr. Thus all
APIs exported from the driver should work with that rather than
requiring the caller to pass a pointer to an internal part of the
structure.
In other words
virCPUx86DataAddCPUID(cpudata, &cpuid)
is much better than the original
virCPUx86DataAddCPUID(&cpudata->data.x86, &cpuid)
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 2a8d40f4ec refactored qemuMonitorJSONGetCPUx86Data and replaced
virJSONValueObjectGet(reply, "return") with virJSONValueObjectGetArray.
While the former is guaranteed to always return non-NULL pointer the
latter may return NULL if the returned JSON object is not an array.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We were setting it based on whether it was supported and that lead to
setting it to NULL, which our JSON code caught. However it ended up
producing the following results:
$ virsh blkdeviotune fedora vda --total-bytes-sec-max 2000
error: Unable to change block I/O throttle
error: internal error: argument key 'group' must not have null value
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In cases where CPU hotplug is supported by qemu force the monitor to
reject invalid or broken responses to 'query-cpus'. It's expected that
the command returns usable data in such case.
When running on s390 with a kernel that does not support cpu model checking and
with a Qemu new enough to support query-cpu-model-expansion, the gathering of qemu
capabilities will fail. Qemu responds to the query-cpu-model-expansion qmp
command with an error because the needed kernel ioct does not exist. When this
happens a guest cannot even be defined due to missing qemu capabilities data.
This patch fixes the problem by silently ignoring generic errors stemming from
calls to query-cpu-model-expansion.
Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
The query-cpu-model-expansion is currently implemented for s390(x) only
and all CPU properties it returns are booleans. However, x86
implementation will report more types of properties. Without making the
code more tolerant older libvirt would fail to probe newer QEMU
versions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The qemuMonitorJSONParseCPUModelProperty function is a callback for
virJSONValueObjectForeachKeyValue and is called for each key/value pair,
thus it doesn't really make sense to check whether key is NULL.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
query-cpu-model-expansion is used to get a list of features for a given cpu
model name or to get the model and features of the host hardware/environment
as seen by Qemu/kvm.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Currently we build the JSON object for the "block_set_io_throttle"
command using the knowledge that a NULL for a support*Options boolean
would essentially ignore the rest of the arguments.
This may not work properly if some capability was backported, plus it just
looks rather ugly. So instead, build the "base" arguments and then if
the support*Option bool capability is set, add in the arguments on the fly.
Then append those arguments to the basic command and send to qemu.
QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.
We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:
<domainCapabilities>
...
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'>
<model fallback='allow'>Skylake-Client</model>
...
</mode>
<mode name='custom' supported='yes'>
<model usable='yes'>qemu64</model>
<model usable='yes'>qemu32</model>
<model usable='no'>phenom</model>
<model usable='yes'>pentium3</model>
<model usable='yes'>pentium2</model>
<model usable='yes'>pentium</model>
<model usable='yes'>n270</model>
<model usable='yes'>kvm64</model>
<model usable='yes'>kvm32</model>
<model usable='yes'>coreduo</model>
<model usable='yes'>core2duo</model>
<model usable='no'>athlon</model>
<model usable='yes'>Westmere</model>
<model usable='yes'>Skylake-Client</model>
...
</mode>
</cpu>
...
</domainCapabilities>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Whenever qemuMonitorJSONCheckError returns 0, the "return" object is
guaranteed to exist. Thus virJSONValueObjectGetObject will never fail to
get it. On the other hand, virJSONValueObjectGetArray may fail since the
"return" object may not be an array.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
This patch will also adjust the qemuMonitorJSONSetBlockIoThrottle error
procession so that rather than returning/displaying:
"error: internal error: Unexpected error"
Fetch the actual error message from qemu and display that
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Since introduction of chardev hotplug the code was wrong for the UDP
case and basically created a TCP socket instead. Use proper objects and
type for UDP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1377602
We're about to add more options, let's avoid having multiple if-then-else
which each try to set up the qemuMonitorJSONMakeCommand call with all the
parameters it knows about.
Instead, use the fact that when a NULL is found in the argument list that
processing of the remaining arguments stops and just have call.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reduce some cut-n-paste code by creating common helper. Make use of the
recently added virJSONValueObjectStealArray to grab the devices list as
part of the common code (we we can Free the reply) and return devices for
each of the callers to continue to parse.
NB: This also adds error checking to qemuMonitorJSONDiskNameLookup
Signed-off-by: John Ferlan <jferlan@redhat.com>
The list of supported CPU models in domain capabilities is stored in
virDomainCapsCPUModels. Let's use the same object for storing CPU models
in QEMU capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.
Likewise, if the environment exists the hot unplug needs adjustment as
well. Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add support for retrieving information regarding hotpluggable cpu units
supported by qemu. Data returned by the command carries information
needed to figure out the granularity of hotplug, the necessary cpu type
name and the topology information.
Note that qemu doesn't specify any particular order of the entries thus
it's necessary sort them by socket_id, core_id and thread_id to the
order libvirt expects.
To allow matching up the data returned by query-cpus to entries in the
query-hotpluggable-cpus reply for CPU hotplug it's necessary to extract
the QOM path as it's the only link between the two.
QEMU reports whether 'query-hotpluggable-cpus' is supported for a given
machine type. Extract and cache the information using the capability
cache.
When copying the capabilities for a new start of qemu, mask out the
presence of QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine type
doesn't support hotpluggable cpus.
Prepare to extract more data by returning an array of structs rather than
just an array of thread ids. Additionally report fatal errors separately
from qemu not being able to produce data.
The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.
This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.
Move QEMU_DRIVE_HOST_PREFIX into the qemu_alias.c to dissuade future
callers from using it. Create qemuAliasDiskDriveSkipPrefix in order
to handle the current consumers that desire to check if an alias has
the drive- prefix and "get beyond it" in order to get the disk alias.
Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.
Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h
Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".
Rather than pass the disks[i]->info.alias to qemuMonitorSetDrivePassphrase
and then generate the "drive-%s" alias from that, let's use qemuAliasFromDisk
prior to the call to generate the drive alias and then pass that along
thus removing the need to generate the alias from the monitor code.
QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
Commit ce745914 introduced detection of actual video ram sizes to fix migration
if QEMU decide to modify the values provided by libvirt. This works perfectly
for domains with number of video devices up to two.
If there are more than two video devices in the guest all the secondary devices
in the XML will have the same memory values. This is because our current code
search for QOM device path only by the device type name and all the secondary
video devices has the same name "qxl".
This patch introduces a new search function that will try to search a QOM device
path using also device's alias if the alias is available. After that it will
fallback to the old recursive code if the alias search found no results.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358728
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We should not require any parameters to be present. After all we have
the *_set bools to express that some parameters were not set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuMonitorMigrationParams is a better name for a structure which
contains various migration parameters. While doing that, we should use
full names for individual parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1298070
We have the code for attaching redirdevs for ages now.
Unfortunately, our monitor code that handles talking to the qemu
process was missing a little piece of code that actually enabled
the feature.
BTW: it really is called "type" on the monitor, even though it's
called "name" on the cmd line. Don't ask.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
CPUID instruction normally takes its parameter from EAX, but sometimes
ECX is used as an additional parameter. This patch prepares the x86 CPU
driver code for the new 'ecx_in' CPUID parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virCPUData, virCPUx86Feature, and virCPUx86Model all contained a pointer
to virCPUx86Data, which was not very nice since the real CPUID data were
accessible by yet another pointer from virCPUx86Data. Moreover, using
virCPUx86Data directly will make static definitions of internal CPU
features a bit easier.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch splits qemuMonitorJSONGetCPUx86Data in three functions:
- qemuMonitorJSONCheckCPUx86 checks if QEMU supports reporting CPUID
features for a guest CPU
- qemuMonitorJSONParseCPUx86Features parses CPUID features from a JSON
array
- qemuMonitorJSONGetCPUx86Data gets the requested guest CPU property
from QOM and uses qemuMonitorJSONParseCPUx86Features to parse it
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPUID instruction normally takes its parameter from EAX, but sometimes
ECX is used as an additional parameter. Let's rename 'function' to
'eax_in' in preparation for adding 'ecx_in'.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit b4a5fd95 introduced vram64 attribute for QXL video device but
there were two issues. Only function
qemuMonitorJSONUpdateVideoVram64Size should update the vram64 attribute
and also the value is in MiB, not in B.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Extract whether a given drive has a tray and whether there is no image
inserted.
Negative logic for the image insertion is chosen so that the flag is set
only if we are certain of the fact.
Recent adjustments to the code produced a litany of coverity false
positives, but only because the "standard" procedure of setting a
variable to NULL after it was assigned to something else and keeping
the *Free/*FREE call in the cleanup path wasn't kept. So this patch
makes those adjustments (assign variable to NULL and remove the if
'ret < 0' condition to clean it up).
Signed-off-by: John Ferlan <jferlan@redhat.com>
In 7884d089d2 I've started to refactor qemu_monitor_json.c.
Thing is, it's current structure is nothing like the rest of our
code. The @ret variable is rewritten all the time, if()-s are
nested instead of using goto and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In majority of our functions we have this variable @ret that is
overwritten a lot. In other areas of the code we use 'goto
cleanup;' just so that this wouldn't happen. But here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In these functions I'm fixing here, we do call
qemuMonitorJSONCheckError() followed by another check if qemu
reply contains 'return' object. If it wouldn't, the former
CheckError() function would error out and the flow would not even
get to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Usually, the flow in this area of the code is as follows:
qemuMonitorJSONMakeCommand()
qemuMonitorJSONCommand()
qemuMonitorJSONCheckError()
parseReply()
But in this function, for some reasons, the last two steps were
swapped. This makes no sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU introduced the query-gic-capabilities QMP command
with commit 4468d4e0f383: use the command, if available,
to probe available GIC capabilities.
The information obtained is stored in a virQEMUCaps
instance, and will be later used to fill in a
virDomainCaps instance.
The event is emitted on ACPI OSPM Status Indication events.
ACPI standard documentation describes the method as:
This object is an optional control method that is invoked by OSPM to
indicate processing status to the platform. During device ejection,
device hot add, or other event processing, OSPM may need to perform
specific handshaking with the platform. OSPM may also need to indicate
to the platform its inability to complete a requested operation; for
example, when a user presses an ejection button for a device that is
currently in use or is otherwise currently incapable of being ejected.
In this case, the processing of the ACPI Eject Request notification by
OSPM fails. OSPM may indicate this failure to the platform through the
invocation of the _OST control method. As a result of the status
notification indicating ejection failure, the platform may take certain
action including reissuing the notification or perhaps turning on an
appropriate indicator light to signal the failure to the user.
qemu won't ever add those functions directly to QMP. They will be
replaced with 'blockdev-add' and 'blockdev-del' eventually. At this time
there's no need to keep the stubs around.
Additionally the drive_del stub in JSON contained dead code in the
attempt to report errors. (VIR_ERR_OPERATION_UNSUPPORTED was never
reported). Since the text impl does have the same message it is reported
anyways.
QEMU changed the error message to:
"Tray of device 'drive-sata0-0-1' is not open"
and they may change the error massage in the future.
This updates the code to not depend on the text from the error message
but only on error itself.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Migration enters "postcopy-active" state after QEMU switches to
post-copy and pauses guest CPUs. From libvirt's point of view this state
is similar to "completed" because we need to transfer guest execution to
the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.
Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.
Narrowed down the list of #include's in the split out module to
those that are necessary for build.
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 256496e1 introduced a detection if "is locked" in error replay
from qemu monitor. Commit c4073657 fixed a memory leak, but it was
pointed out by Peter, that this could be done cleaner without
stringifing the replay.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The return value of virJSONValueToString() should be freed when
no longer needed. This is not the case after 256496e1.
==26902== 138 bytes in 2 blocks are definitely lost in loss record 1,051 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EBB9: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2225)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
==26902== 106 bytes in 1 blocks are definitely lost in loss record 1,033 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EC0C: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2227)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Few parts of the code looked at the current progress of and assumed that
a two phase blockjob is in the _READY state as soon as the progress
reached 100% (info.cur == info.end). In current versions of qemu this
assumption is invalid and qemu exposes a new flag 'ready' in the
query-block-jobs output that is set to true if the job is actually
finished.
This patch adds internal data handling for reading the 'ready' flag and
acting appropriately as long as the flag is present.
While this still doesn't fix the virsh client problem with two phase
block jobs and the --pivot option, it at least improves the error
message:
$ virsh blockcommit --wait --verbose vm vda --base vda[1] --active --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: internal error: unable to execute QEMU command 'block-job-complete': The active block job for device 'drive-virtio-disk0' cannot be completed
to
$ virsh blockcommit --wait --verbose VM vda --base vda[1] --active --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: block copy still active: disk 'vda' not ready for pivot yet
Modify the eject monitor functions to parse the return code and detect,
whether the error contains "is locked" to report this type of failure to
upper layers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Spice events have mostly similar information present in the event JSON
but they differ in the name of the element containing the port.
The JSON event also provides connection ID which might be useful in the
future.
This patch splits up the event parser code into two functions and the
SPICE reimplements the event parsing with correct names and drops the
VNC only stuff.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1236585
Instead of using qemuMonitorJSONDevGetBlockExtent (which I plan to
remove later) extract the data in place.
Additionally add a flag that will be set when the wr_highest_offset was
extracted correctly so that callers can act according to that.
The test case addition should help make sure that everything works.
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Rather than grabbing an arbitrary JSON value and then checking
if it has the right type, we might as well request the correct
type to begin with.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent)
(qemuMonitorJSONCommandWithFd, qemuMonitorJSONHandleGraphics)
(qemuMonitorJSONGetStatus, qemuMonitorJSONExtractCPUInfo)
(qemuMonitorJSONGetVirtType, qemuMonitorJSONGetBalloonInfo)
(qemuMonitorJSONGetMemoryStats)
(qemuMonitorJSONDevGetBlockExtent)
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne)
(qemuMonitorJSONBlockStatsUpdateCapacity)
(qemuMonitorJSONGetBlockExtent)
(qemuMonitorJSONGetMigrationStatusReply)
(qemuMonitorJSONGetDumpGuestMemoryCapability)
(qemuMonitorJSONAddFd, qemuMonitorJSONQueryRxFilterParse)
(qemuMonitorJSONExtractChardevInfo)
(qemuMonitorJSONDiskNameLookupOne)
(qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONGetAllBlockJobInfo)
(qemuMonitorJSONBlockIoThrottleInfo, qemuMonitorJSONGetVersion)
(qemuMonitorJSONGetMachines, qemuMonitorJSONGetCPUDefinitions)
(qemuMonitorJSONGetCommands, qemuMonitorJSONGetEvents)
(qemuMonitorJSONGetKVMState, qemuMonitorJSONGetObjectTypes)
(qemuMonitorJSONGetObjectListPaths)
(qemuMonitorJSONGetObjectProps, qemuMonitorJSONGetTargetArch)
(qemuMonitorJSONGetMigrationCapabilities)
(qemuMonitorJSONGetStringArray, qemuMonitorJSONAttachCharDev)
(qemuMonitorJSONGetCPUx86Data, qemuMonitorJSONGetIOThreads)
(qemuMonitorJSONGetMemoryDeviceInfo): Use shorter idioms.
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
"query-block-jobs" QMP command returns all running block jobs at once,
while qemuMonitorBlockJobInfo would only report one. This is not very
nice in case we need to check several block jobs. This patch refactors
the monitor code to always parse all block jobs and store them in a
hash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When traversing through the QOM tree, we're looking for
a link to a device, e.g.:
link<virtio-balloon-pci>
Introduce a helper that will format the link name at the start,
instead of doing it every time while recursing through the tree.
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
qemuDomainBlockJobImpl become an unmaintainable mess over the years of
adding new stuff to it. This patch starts splitting up individual
functions from it until it can be killed entirely.
In bulk this will add lines of code rather than delete them but it will
be traded for maintainability.
My intention is to split qemuMonitorJSONBlockJob() into simpler separate
functions for every block job type. Since the error handling code is the
same for all block jobs, this patch extracts the code into a separate
function that will later be reused in more places.
With the new helper qemuMonitorJSONErrorIsClass we can save a few
function calls as we can extract the error object once.
Split out the function that checks the actual error class string into a
separate helper as it will be useful later and refactor
qemuMonitorJSONHasError to return bool type and remove few useless
checks.
Basically virJSONValueObjectHasKey are useless here since the next call
to virJSONValueObjectGet is checking the return value again (which can't
fail at that point). By removing the first check we save a function
call.
When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.
In qemu 2.3, the migration status will include 'cancelling' in the
window between when an asynchronous cancel has been requested and
when the migration is actually halted. Previously, qemu hid this
state and reported 'active'. Libvirt manages the sequence okay
even when the string is unrecognized (that is, it will report an
unknown state:
Migration: [ 69 %]^Cerror: internal error: unexpected migration status in cancelling.
but the migration is still cancelled), but recognizing the string
makes for a smoother user experience.
* src/qemu/qemu_monitor.h
(QEMU_MONITOR_MIGRATION_STATUS_CANCELLING): Add enum.
* src/qemu/qemu_monitor.c (qemuMonitorMigrationStatus): Map it.
* src/qemu/qemu_migration.c (qemuMigrationUpdateJobStatus): Adjust
clients.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetMigrationStatusReply): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our virDomainBlockStatsFlags API uses the old approach where, when it's
called without the typed parameter array, returns the count of parameters
supported by qemu.
The supported parameter count is obtained via separate monitor calls
which is a waste since we can calculate it when gathering the data.
This patch adds code to the qemuMonitorGetAllBlockStatsInfo workers that
allows to track the count of supported fields reported by qemu and will
allow to remove the old duplicate code.
The function that is extracting block stats data from the QMP monitor
reply contains a lot of repeated code. Since I'd be changing each of the
copies in the next patch, lets convert it to a macro right away.
Allocate the hash table in the monitor wrapper function instead of the
worker itself so that the text monitor impl that will be added in the
next patch doesn't have to duplicate it.
QEMU internally updates the size of video memory if the domain XML had
provided too low memory size or there are some dependencies for a QXL
devices 'vgamem' and 'ram' size. We need to know about the changes and
store them into the status XML to not break migration or managedsave
through different libvirt versions.
The values would be loaded only if the "vgamem_mb" property exists for
the device. The presence of the "vgamem_mb" also tells that the
"ram_size" and "vram_size" exists for QXL devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When requested in a later patch, the QMP command results are now
examined recursively. As qemu_driver will eventually have to
read items out of the hash table as stored by this patch, the
computation of backing alias string is done in a shared location.
* src/qemu/qemu_domain.h (qemuDomainStorageAlias): New prototype.
* src/qemu/qemu_domain.c (qemuDomainStorageAlias): Implement it.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): Perform recursion.
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will allow recursion into backing chains when
collecting block stats. This patch should not change behavior,
but merely moves out the common code that will be reused once
recursion is enabled, and adds the parameter that will turn on
recursion.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Add recursion parameter,
although it is ignored for now.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Add parameter, and
split...
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): ...into helpers.
(qemuMonitorJSONGetBlockStatsInfo): Update caller.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Update caller.
* src/qemu/qemu_migration.c (qemuMigrationCookieAddNBD): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The function queries the block devices visible to qemu
('query-block') and parses the qemu's output. The info is
returned in a hash table which is expected to be pre-filled by
qemuMonitorJSONGetAllBlockStatsInfo(). However, in the next patch
we are not going to call the latter function at all, so we should
make the former function add devices into the hash table if not
found there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Improve the monitor function to also retrieve the guest state of
character device (if provided) so that we can refresh the state of
virtio-serial channels and perhaps react to changes in the state in
future patches.
This patch changes the returned data from qemuMonitorGetChardevInfo to
return a structure containing the pty path and the state for all the
character devices.
The change to the testsuite makes sure that the data is parsed
correctly.
New qemu added a new event that is emitted when a virtio serial channel
is opened in the guest OS. This allows us to update the state of the
port in the output-only XML element.
This patch implements the monitor callbacks and necessary handlers to
update the state in the definition.
To unify future additions that require information from "query-chardev"
rename qemuMonitorGetPtyPaths and friends to qemuMonitorGetChardevInfo
and move the allocation of the returned hash into the top level
function.
We used to set migration capabilities only when a user asked for them in
flags. This is fine when migration succeeds since the QEMU process is
killed in the end but in case migration fails or if it's cancelled, some
capabilities may remain turned on with no way to turn them off. To fix
that, migration capabilities have to be turned on if requested but
explicitly turned off in case they were not requested but QEMU supports
them.
https://bugzilla.redhat.com/show_bug.cgi?id=1163953
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use the device type name if we know it instead of its number,
even if we can't hotplug it:
qemuMonitorJSONAttachCharDevCommand:6094 : operation failed: Unsupported
char device type '10'
Detect if the the qemu binary currently in use support the bps_max option,
If yes add it to the command, if not, just ignore the option.
We don't print error here, because the check for invalide arguments
has alerady been made in qemu_driver.c
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To allow live modification of device backends in qemu libvirt needs to
be able to hot-add/remove "objects". Add monitor backend functions to
allow this.
This function will be used for hot-add/remove of RNG backends,
IOThreads, memory backing objects, etc.
Our qemu monitor code has a converter from key-value pairs to a json
value object. I want to re-use the code later and having it part of the
monitor command generator is inflexible. Split it out into a separate
helper.
NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the
guest modified the NIC's RX Filter (for example, if the MAC address of
the NIC is changed by the guest).
This patch doesn't do anything useful with that event; it just sets up
all the plumbing to get news of the event into a worker thread with
all proper locking/reference counting, and provide an easy place to
add in desired functionality.
See src/qemu/EVENTHANDLERS.txt for information/instructions on adding
a libvirt-internal handler for a qemu event (using
NIC_RX_FILTER_CHANGED as an example).
This function can be called at any time to get the current status of a
guest's network device rx-filter. In particular it is useful to call
after libvirt recieves a NIC_RX_FILTER_CHANGED event - this event only
tells you that something has changed in the rx-filter, the details are
retrieved with the query-rx-filter monitor command (only available in
the json monitor). The command sent to the qemu monitor looks like this:
{"execute":"query-rx-filter", "arguments": {"name":"net2"} }'
and the results will look something like this:
{
"return": [
{
"promiscuous": false,
"name": "net2",
"main-mac": "52:54:00:98:2d:e3",
"unicast": "normal",
"vlan": "normal",
"vlan-table": [
42,
0
],
"unicast-table": [
],
"multicast": "normal",
"multicast-overflow": false,
"unicast-overflow": false,
"multicast-table": [
"33:33:ff:98:2d:e3",
"01:80:c2:00:00:21",
"01:00:5e:00:00:fb",
"33:33:ff:98:2d:e2",
"01:00:5e:00:00:01",
"33:33:00:00:00:01"
],
"broadcast-allowed": false
}
],
"id": "libvirt-14"
}
This is all parsed from JSON into a virNetDevRxFilter object for
easier consumption. (unicast-table is usually empty, but is also an
array of mac addresses similar to multicast-table).
(NB: LIBNL_CFLAGS was added to tests/Makefile.am because virnetdev.h
now includes util/virnetlink.h, which includes netlink/msg.h when
appropriate. Without LIBNL_CFLAGS, gcc can't find that file (if
libnl/netlink isn't available, LIBNL_CFLAGS will be empty and
virnetlink.h won't try to include netlink/msg.h anyway).)
Aeons ago (commit 34dcbbb4, v0.8.2), we added a new libvirt event
(VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON) in order to tell the user WHY
the guest halted. This is because at least VDSM wants to react
differently to ENOSPC events (resize the lvm partition to be larger,
and resume the guest as if nothing had happened) from all other events
(I/O is hosed, throw up our hands and flag things as broken). At the
time this was done, downstream RHEL qemu added a vendor extension
'__com.redhat_reason', which would be exactly one of these strings:
"enospc", "eperm", "eio", and "eother". In our stupidity, we exposed
those exact strings to clients, rather than an enum, and we also
return "" if we did not have access to a reason (which was the case
for upstream qemu).
Fast forward to now: upstream qemu commit c7c2ff0c (will be qemu 2.2)
FINALLY adds a 'nospace' boolean, after discussion with multiple
projects determined that VDSM really doesn't care about distinction
between any other error types. So this patch converts 'nospace' into
the string "enospc" for compatibility with RHEL clients that were
already used to the downstream extension, while leaving the reason
blank for all other cases (no change from the status quo).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1119784
* src/qemu/qemu_monitor_json.c (qewmuMonitorJSONHandleIOError):
Parse reason field from modern qemu.
* include/libvirt/libvirt.h.in
(virConnectDomainEventIOErrorReasonCallback): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Management software wants to be able to allocate disk space on demand.
To support this they need keep track of the space occupation of the
block device. This information is reported by qemu as part of block
stats.
This patch extend the block information in the bulk stats with the
allocation information.
To keep the same behaviour a helper is extracted from
qemuMonitorJSONGetBlockExtent in order to get per-device allocation
information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While our code gathers block stats via "query-blockstats" some
information need to be gathered via "query-block". Add a helper function
that will update the blockstats structure if requested.
The current block stats code matched up the disk name with the actual
stats by the order in the data returned from qemu. This unfortunately
isn't right as qemu may return the disks in any order. Fix this by
returning a hash of stats and index them by the disk alias.
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.
To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Upstream qemu 1.4 added some drive-mirror tunables not present
when it was first introduced in 1.3. Management apps may want
to set these in some cases (for example, without tuning
granularity down to sector size, a copy may end up occupying
more bytes than the original because an entire cluster is
copied even when only a sector within the cluster is dirty,
although tuning it down results in more CPU time to do the
copy). I haven't personally needed to use the parameters, but
since they exist, and since the new API supports virTypedParams,
we might as well expose them.
Since the tuning parameters aren't often used, and omitted from
the QMP command when unspecified, I think it is safe to rely on
qemu 1.3 to issue an error about them being unsupported, rather
than trying to create a new capability bit in libvirt.
Meanwhile, all versions of qemu from 1.4 to 2.1 have a bug where
a bad granularity (such as non-power-of-2) gives a poor message:
error: internal error: unable to execute QEMU command 'drive-mirror': Invalid parameter 'drive-virtio-disk0'
because of abuse of QERR_INVALID_PARAMETER (which is supposed to
name the parameter that was given a bad value, rather than the
value passed to some other parameter). I don't see that a
capability check will help, so we'll just live with it (and it
has since been improved in upstream qemu).
* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror): Add
parameters.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCopyCommon): Likewise.
(qemuDomainBlockRebase, qemuDomainBlockCopy): Adjust callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Likewise.
* tests/qemumonitorjsontest.c (qemuMonitorJSONDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If the virJSONValueNewObject() fails, then rather than going to error
and getting a Coverity false positive since it doesn't seem to understand
the relationship between nkeywords, keywords, and values and seems to
believe calling qemuFreeKeywords will cause a NULL deref - just return NULL
Signed-off-by: John Ferlan <jferlan@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX. As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.
Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba.
In the process, make some tweaks to simplify the logic when
parsing the JSON reply. There should be no user-visible
semantic changes.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1103245
An advice appeared there on the qemu-devel list [1]. When a domain is
suspended and then resumed guest kernel is not aware of this. So we've
introduced virDomainSetTime API that resets the time within guest
using qemu-ga. On the other hand, qemu itself is trying to make RTC
beat faster to catch the difference. But if we don't tell qemu that
guest's time was reset via the other method, both mechanisms are
applied resulting in again wrong guest time. In order to avoid summing
both corrections we need to tell qemu that it should not use the RTC
injection if the guest time is set via guest agent.
1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
To allow changing the name that is recorded in the top of the current
image chain used in a block pull/rebase operation, we need to specify
the backing name to qemu. This is done via the "backing-file" attribute
to the block-stream commad.
To allow changing the name that is recorded in the overlay of the TOP
image used in a block commit operation, we need to specify the backing
name to qemu. This is done via the "backing-file" attribute to the
block-commit command.
We are about to turn on support for active block commit. Although
qemu 2.0 was the first version to mostly support it, that version
mis-handles 0-length files, and doesn't have anything available for
easy probing. But qemu 2.1 fixed bugs, and made life simpler by
letting the 'top' argument be optional. Unless someone begs for
active commit with qemu 2.0, for now we are just going to enable
it only by probing for qemu 2.1 behavior (anyone backporting active
commit can also backport the optional argument behavior). This
requires qemu.git commit 7676e2c597000eff3a7233b40cca768b358f9bc9.
Although all our actual uses of block-commit supply arguments for
both base and top, we can omit both arguments and use a bogus
device string to trigger an interesting behavior in qemu. All QMP
commands first do argument validation, failing with GenericError
if a mandatory argument is missing. Once that passes, the code
in the specific command gets to do further checking, and the qemu
developers made sure that if device is the only supplied argument,
then the block-commit code will look up the device first, with a
failure of DeviceNotFound, before attempting any further argument
validation (most other validations fail with GenericError). Thus,
the category of error class can reliably be used to decipher
whether the top argument was optional, which in turn implies a
working active commit. Since we expect our bogus device string to
trigger an error either way, the code is written to return a
distinct return value without spamming the logs.
* src/qemu/qemu_monitor.h (qemuMonitorSupportsActiveCommit): New
prototype.
* src/qemu/qemu_monitor.c (qemuMonitorSupportsActiveCommit):
Implement it.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Allow NULL for top and base, for probing purposes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise, implementing the probe.
* tests/qemumonitorjsontest.c (mymain): Enable...
(testQemuMonitorJSONqemuMonitorSupportsActiveCommit): ...a new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemuMonitorJSONSendKey declares the "holdtime" argument as unsigned int
while the command was constructed in qemuMonitorJSONMakeCommand using
the "P" modifier which took a unsigned long from the variable
arguments which then made it possible to access uninitialized memory.
This broke the qemumonitorjsontest on 32bit fedora 20:
64) qemuMonitorJSONSendKey
... libvirt: QEMU Driver error : internal error: unsupported data type 'W' for arg 'WVSì D$0èwÿÿÃAå' FAILED
Uncovered by upstream commit f744b831c6.
Additionally add test for the hold-time option.
This patch adds option to specify that a json qemu command argument is
optional without the need to use if's or ternary operators to pass the
list. Additionally all the modifier characters are documented to avoid
user confusion.
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If virDomainMemoryStats is called too soon after domain startup,
QEMU returns:
"error":{"class":"GenericError","desc":"guest hasn't updated any stats yet"}
when we try to query balloon stats.
Check for this reply and log it as OPERATION_INVALID instead of
INTERNAL_ERROR. This means the daemon only logs it at the debug level,
without polluting system logs.
Reported by Laszlo Pal:
https://www.redhat.com/archives/libvirt-users/2014-May/msg00023.html
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so. If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.
* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue. Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]
Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.
Put another way, if you have the backing chain:
[A] <- [B(back=./A)] <- [C(back=./B)]
and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]? Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.
I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemuMonitorJSONBlockJob handles a few errors internally. If qemu
returns a different error we would report a rather unhelpful message:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error
As the actual message from qemu contains a bit more info, let's use it
to report something a little more useful:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error: (GenericError) 'Base '/dev/null' not found'
In qemuMonitorJSONExtractCPUInfo an error message hinted on missing
character device data which is wrong.
Also a comment states that only qemu-kvm tree includes the thread_id
field. This is no longer true.
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
