Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
(cherry picked from commit 1d96440a06)
Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.
Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
(cherry picked from commit 470d5c4654)
VFIO device assignment requires a cgroup ACL to be setup for access to
the /dev/vfio/nn "group" device for any devices that will be assigned
to a guest. In the case of a host device that is allocated from a
pool, it was being allocated during qemuBuildCommandLine(), which is
called by qemuProcessStart() *after* the all-encompassing
qemuSetupCgroup() was called, meaning that the standard Cgroup ACL
setup wasn't creating ACLs for these devices allocated from pools.
One possible solution was to manually add a single ACL down inside
qemuBuildCommandLine() when networkAllocateActualDevice() is called,
but that has two problems: 1) the function that adds the cgroup ACL
requires a virDomainObjPtr, which isn't available in
qemuBuildCommandLine(), and 2) we really shouldn't be doing network
device setup inside qemuBuildCommandLine() anyway.
Instead, I've created a new function called
qemuNetworkPrepareDevices() which is called just before
qemuPrepareHostDevices() during qemuProcessStart() (explanation of
ordering in the comments), i.e. well before the call to
qemuSetupCgroup(). To minimize code churn in a patch that will be
backported to 1.0.5-maint, qemuNetworkPrepareDevices only does
networkAllocateActualDevice() and the bare amount of setup required
for type='hostdev network devices, but it eventually should do *all*
device setup for guest network devices.
Note that some of the code that was previously needed in
qemuBuildCommandLine() is no longer required when
networkAllocateActualDevice() is called earlier:
* qemuAssignDeviceHostdevAlias() is already done further down in
qemuProcessStart().
* qemuPrepareHostdevPCIDevices() is called by
qemuPrepareHostDevices() which is called after
qemuNetworkPrepareDevices() in qemuProcessStart().
As hinted above, this new function should be moved into a separate
qemu_network.c (or similarly named) file along with
qemuPhysIfaceConnect(), qemuNetworkIfaceConnect(), and
qemuOpenVhostNet(), and expanded to call those functions as well, then
the nnets loop in qemuBuildCommandLine() should be reduced to only
build the commandline string (which itself can be in a separate
qemuInterfaceBuilldCommandLine() function as suggested by
Michal). However, this will require storing away an array of tapfd and
vhostfd that are needed for the commandline, so I would rather do that
in a separate patch and leave this patch at the minimum to fix the
bug.
(cherry picked from commit 8cd40e7e0d)
In the non linux case some callers like gather_scsi_host_caps needed the
return code of -1 while others like update_caps needed an empty
statement (to avoid a "statement without effect" warning). This is much
simpler solved by using a function instead of a define.
(cherry picked from commit 58662f4416)
The lockd plugin for the lock manager was not correctly
handling the release of resource locks. This meant that
during migration, or when pausing a VM, the locks would
not get released. This in turn made it impossible to
resume the domain, or finish migration
(cherry picked from commit 8dc93ffadc)
POSIX says pthread_t is opaque. We can't guarantee if it is scaler
or a pointer, nor what size it is; and BSD differs from Linux.
We've also had reports of gcc complaining on attempts to cast it,
if we use a cast to the wrong type (for example, pointers have to be
cast to void* or intptr_t before being narrowed; while casting a
function return of scalar pthread_t to void* triggers a different
warning).
Give up on casts, and use unions to get at decent bits instead. And
rather than futz around with figuring which 32 bits of a potentially
64-bit pointer are most likely to be unique, convert the rest of
the code base to use 64-bit values when using a debug id.
Based on a report by Guido Günther against kFreeBSD, but with a
fix that doesn't regress commit 4d970fd29 for FreeBSD.
* src/util/virthreadpthread.c (virThreadSelfID, virThreadID): Use
union to get at a decent bit representation of thread_t bits.
* src/util/virthread.h (virThreadSelfID, virThreadID): Alter
signature.
* src/util/virthreadwin32.c (virThreadSelfID, virThreadID):
Likewise.
* src/qemu/qemu_domain.h (qemuDomainJobObj): Alter type of owner.
* src/qemu/qemu_domain.c (qemuDomainObjTransferJob)
(qemuDomainObjSetJobPhase, qemuDomainObjReleaseAsyncJob)
(qemuDomainObjBeginNestedJob, qemuDomainObjBeginJobInternal): Fix
clients.
* src/util/virlog.c (virLogFormatString): Likewise.
* src/util/vireventpoll.c (virEventPollInterruptLocked):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 22d12905e6)
If an early dispatch check caused a jump to the 'cleanup' branch
then virTypeParamsFree() would be called with an uninitialized
'nparams' variable. Fortunately 'params' is initialized to NULL,
so the uninitialized 'nparams' variable would not be used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 31dbbb667f)
Commit 776d49f4 added a static function that is only called
conditionally; leading to this compile error on mingw:
CC libvirt_util_la-virprocess.lo
../../src/util/virprocess.c:624:26: error: 'struct rlimit' declared inside parameter list [-Werror]
../../src/util/virprocess.c:624:26: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
../../src/util/virprocess.c:622:1: error: 'virProcessPrLimit' defined but not used [-Werror=unused-function]
* src/util/virprocess.c (virProcessPrLimit): Only declare
virProcessPrLimit when used.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 05f79a3894)
The F_DUPFD_CLOEXEC operation with fcntl() expects a single
int argument, specifying the minimum FD number for the newly
dup'd file descriptor. We were not specifying that causing
random stack data to be accessed as the FD number. Sometimes
that worked, sometimes it didn't.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit d6670a64e1)
https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed. In response that problem, Fedora
packaging guidelines were recently updated. This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups
* libvirt.spec.in (daemon): Follow updated Fedora guidelines.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit a2584d58f6)
On a mingw build, 'make distcheck' fails with:
GEN libvirt_qemu.def
make[3]: *** No rule to make target `../../src/libvirt_lxc.syms', needed by `libvirt_lxc.def'. Stop.
I traced it to a missing entry in EXTRA_DIST. But rather than keep
the entire list in sync, it is easier to list the three syms files
that drive .so files directly, and then reuse existing makefile
variables for the remaining files (that is, I validated that all
remaining files are added to SYM_FILES, possibly via USED_SYM_FILES,
according to makefile conditionals).
Problem introduced in commit 3d1596b (v1.0.2).
* src/Makefile.am (EXTRA_DIST): Ensure all syms files are shipped.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit ed11ab93fa)
I must have looked at this a couple dozen times before I noticed it
had "!=" instead of "==". Not doing this setup prevented qemu from
doing anything with the vfio group device.
(cherry picked from commit 52ba0f6e1c)
The libvirt 1.0.5 tarball is missing a file which renders 'make
check' broken; first reported on list by Guido Günther.
* python/Makefile.am (EXTRA_DIST): Hoist sanitytest.py out of
HAVE_PYTHON conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 5a3487dadb)
This should resolve https://bugzilla.redhat.com/show_bug.cgi?id=958907
Recent new addition of code to read/write active network state to the
NETWORK_STATE_DIR in the network driver broke startup for
qemu:///session. The network driver had several state file paths
hardcoded to /var, which could never possibly work in session mode.
This patch modifies *all* state files to use a variable string that is
set differently according to whether or not we're running
privileged. (It turns out that logDir was never used, so it's been
completely eliminated.)
There are very definitely other problems preventing dnsmasq and radvd
from running in non-privileged mode, but it's more consistent to have
the directories used by them be determined in the same fashion.
NB: I've noted before that the network driver is storing its state
(including dnsmasq and radvd state) in /var/lib, while qemu stores its
state in /var/run. It would probably have been better if the two
matched, but it's been this way for a long time, and changing it would
break running installations during an upgrade, so it's best to just
leave it as it is.
(cherry picked from commit 2ffd87d820)
Conflicts:
src/network/bridge_driver.c - code removed by this patch had
been modified upstream.
virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:
/sys/bus/pci/dddd:bb:ss.ff/driver
Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.
This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.
For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.
Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections. This
appears to be the only offender.
* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cc6d19f3 added text containing "<code>snapshot<code>" to
formatsnapshot.html.in. The closing tag is missing '/' which causes
the documentation to misrender.
Python code generator "generate_source" section that handles
code generation to "free" inherited objects needs to generate
DISPATCH_FREE calls for all extended_by objects.
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit eca3fdf inadvertantly caused a failure to start for any domain
with the following in its config:
<graphics type='spice' autoport='yes'/>
The problem is that when tlsPort == 0 and defaultMode == "any" (which
is the default for defaultMode), this would be flagged in the code as
"needTLSPort", and if there was then no spice tls config, the new
error+fail would happen.
This patch checks for the case of defaultMode == "any", and in that
case simply doesn't allocate a TLS port (since that's probably not
what the user wanted, and it would have failed later anyway.). It does
leave the error in place for cases when the user specifically asked to
use tls in one way or another, though.
On cygwin, compilation failed because SIOCSIFHWADDR is undefined.
* src/util/virnetdev.c (virNetDevSetMAC): Cygwin can query but not
set mac address.
Signed-off-by: Eric Blake <eblake@redhat.com>
As a result of commit id '19c345f2', 'make -C tests valgrind' has the
following for qemuxml2argvtest:
==22482== 197 (80 direct, 117 indirect) bytes in 1 blocks are definitely lost in loss record 101 of 120
==22482== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==22482== by 0x4C6F301: virAlloc (viralloc.c:124)
==22482== by 0x4C840FC: virSaveLastError (virerror.c:308)
==22482== by 0x431882: qemuBuildCommandLine (qemu_command.c:8204)
==22482== by 0x41E8F0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:155)
==22482== by 0x41FE9F: virtTestRun (testutils.c:157)
==22482== by 0x419DEB: mymain (qemuxml2argvtest.c:654)
==22482== by 0x4204DA: virtTestMain (testutils.c:719)
==22482== by 0x39D0821A04: (below main) (libc-start.c:225)
==22482==
FreeBSD (and maybe other BSDs) have different member
names in struct ifreq when compared to Linux, such as:
- uses ifr_data instead of ifr_newname for setting
interface names
- uses ifr_index instead of ifr_ifindex for interface
index
Also, add a check for SIOCGIFHWADDR for virNetDevValidateConfig().
Use AF_LOCAL if AF_PACKET is not available.
Signed-off-by: Eric Blake <eblake@redhat.com>
If virPCIDeviceGetVFIOGroupDev() failed,
virSecurity*(Set|Restore)HostdevLabel() would fail to free a
virPCIDevice that had been allocated.
These leaks were all introduced (by me) very recently, in commit
f0bd70a.
libxlBuildDomainConfig() was disposing the libxl_domain_config object
on error, only to have it disposed again by libxlBuildDomainConfig()'s
caller, which resulted in a segfault. Leave disposing of the config
object to it's owner.
These fixes solve a compilation failure on FreeBSD:
util/virnetdevtap.c: In function 'virNetDevTapGetName':
util/virnetdevtap.c:56: warning: unused parameter 'tapfd' [-Wunused-parameter]
util/virnetdevtap.c:56: warning: unused parameter 'ifname' [-Wunused-parameter]
* src/util/virnetdevtap.c (virNetDevTapGetName): Add attributes
when TUNGETIFF is not present.
Signed-off-by: Eric Blake <eblake@redhat.com>
Mention file/volume contents instead of just 'file'/'volume'.
Also change Download->download in vol-download help,
to be consistent with other volume commands.
https://bugzilla.redhat.com/show_bug.cgi?id=955537
qemuBuildMemballoonDevStr returns NULL if memballoon doesn't have
the right address type, but it doesn't report an error, leading to:
error: An error occurred, but the cause is unknown
Report a helpful error message instead, e.g.:
error: XML error: memballoon unsupported with address type 'usb'
For long options, print:
* the option as specified by the user if it's unknown
* the canonical long option if its argument is not
a number (and should be)
And for missing arguments, print both the short and
the long option name.
(Doing only one of those would require either parsing
argv ourselves or let getopt print the errors, since
we can't tell long and short options apart by optopt
or longindex)
https://bugzilla.redhat.com/show_bug.cgi?id=949373
Unsupported long option:
$ virsh --pm
Before:
error: unsupported option '-
After:
error: unsupported option '--pm'. See --help.
Missing parameter:
$ virsh --deb
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
$ virsh -rd
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
Non-numeric parameter:
$ virsh --deb duck
Before:
error: option -d takes a numeric argument
After:
error: option --debug takes a numeric argument
When a user requests auto-allocation of the spice TLS port but spice TLS
is disabled in qemu.conf, we start the machine and let qemu fail instead
of erroring out sooner.
Add an error message so that this doesn't happen.
On the off-chance that creation of persistent configuration file would
fail when defining a network that is already started as transient, the
code would remove the transient data structure and thus the network.
This patch changes the code so that in such case, the network is again
marked as transient and left behind.
The USB-specific cgroup setup had been inserted inline in
qemuDomainAttachHostUsbDevice and qemuSetupCgroup, but now there is a
common cgroup setup function called for all hostdevs, so it makes sens
to put the usb-specific setup there and just rely on that function
being called.
The one thing I'm uncertain of here (and a reason for not pushing
until after release) is that previously hostdev->missing was checked
only when starting a domain (and cgroup setup for the device skipped
if missing was true), but with this consolidation, it is now checked
in the case of hotplug as well. I don't know if this will have any
practical effect (does it make sense to hotplug a "missing" usb
device?)
PCIO device assignment using VFIO requires read/write access by the
qemu process to /dev/vfio/vfio, and /dev/vfio/nn, where "nn" is the
VFIO group number that the assigned device belongs to (and can be
found with the function virPCIDeviceGetVFIOGroupDev)
/dev/vfio/vfio can be accessible to any guest without danger
(according to vfio developers), so it is added to the static ACL.
The group device must be dynamically added to the cgroup ACL for each
vfio hostdev in two places:
1) for any devices in the persistent config when the domain is started
(done during qemuSetupCgroup())
2) at device attach time for any hotplug devices (done in
qemuDomainAttachHostDevice)
The group device must be removed from the ACL when a device it
"hot-unplugged" (in qemuDomainDetachHostDevice())
Note that USB devices are already doing their own cgroup setup and
teardown in the hostdev-usb specific function. I chose to make the new
functions generic and call them in a common location though. We can
then move the USB-specific code (which is duplicated in two locations)
to this single location. I'll be posting a followup patch to do that.
Don't reserve slot 2 for video if the machine has no PCI buses.
Error out when the user specifies a video device without
a PCI address when there are no PCI buses.
(This wouldn't work on a machine with no PCI bus anyway since
we do add PCI addresses for video devices to the command line)
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
This isn't strictly speaking a bugfix, but I realized I'd gotten a bit
too verbose when I chose the names for
VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_*. This shortens them all a bit.
