Preparatory step for caching nbdkit capabilities. This patch implements
the newData and isValid virFileCacheHandlers callback functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the libvirt documentation suggests to prefer GObject over
virObject, and since virObject is a GObject, change virFileCache to
allow GObjects as data.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to add caching of the nbdkit capabilities, we will need to
compare against file modification times, etc. So look up this
information when creating the nbdkit caps.
Add a nbdkit_moddir build option to allow the builder to specify the
location to look for nbdkit plugins and filters.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In future commits, we will optionally use nbdkit to serve some remote
disk sources. This patch queries to see whether nbdkit is installed on
the host and queries it for capabilities. The data will be used in later
commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There was support in the code for parsing protocol='ssh' on network disk
sources, but it was not present in the xml schema. Add this to the
schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When Domain-0 autoballooning is enabled, it's possible that memory may
need to be ballooned down in Domain-0 to accommodate the needs of another
virtual machine. libxlDomainFreeMemory handles this task, but due to a
logic bug is underflowing the variable containing Domain-0 new
target memory. The resulting huge numbers are filtered by
libxlSetMemoryTargetWrapper and memory is not changed.
Under the covers, libxlDomainFreeMemory uses Xen's libxl_set_memory_target
API, which includes a 'relative' parameter for specifying how to set the
target. If true, the target is an increment/decrement value over the
current memory, otherwise target is taken as an absolute value.
libxlDomainFreeMemory sets 'relative' to true, but never allows for
negative values by declaring the target memory variable as an unsigned.
Fix by declaring the variable as signed, which also requried adjusting
libxlSetMemoryTargetWrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few places where the following pattern occurs:
if (var)
other = g_strdup(var);
where @other wasn't initialized before g_strdup(). Checking for
var != NULL is useless in this case, as that's exactly what
g_strdup() does (in which case it returns NULL).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adds two new private methods to create metadata change events:
- virNetworkEventMetadataChangeNewFromNet()
- virNetworkEventMetadataChangeNewFromObj()
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the metadata via virNetworkSetMetadata(), we can
now emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of custom
metadata.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When making 'type' member of virDomainControllerDef to be of
virDomainControllerType rather than an int I forgot to update
bhyve_command.c.
Fixes: 27a653b8931051991d44b8776a8cdc08c666b729
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Inside of virDomainDiskSourceNVMeParse() we have
virXMLPropString() + virStrToLong_ull() combo. Switch to
virXMLPropULongLong() which does the same thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnumDefault().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parsers to use virXMLPropEnum()
and fill in missing cases to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnumDefault().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parsers to use virXMLPropEnum()
and fill in missing cases to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parser to use
virXMLPropEnumDefault() and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'bus' member of _virDomainDiskDef is already declared of
virDomainDiskModel type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'mode' member of _virDomainDiskDef is already declared of
virDomainDiskModel type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'type' member of _virDomainDeviceDef is already declared of
virDomainDeviceType type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fsdriver' member of _virDomainFSDef is already declared of
virDomainFSDriverType type. Hence, there is no need to typecast
the variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of qemuDomainDeviceCalculatePCIConnectFlags() there's a
switch() which typecasts a variable of
virDomainHostdevSubsysSCSIVHostModelType type to the very same
type. This is useless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few places where a virDomainHostdevDef->source.subsys
is accessed without ->mode being checked. Mind you,
virDomainHostdevDef can be also in
VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The point of virLXCControllerSetupHostdevCaps() is to access
.caps union member of given <hostdev/> source. And it does so in
the switch, but then, when reporting an error the .subsys member
is accessed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Requires recent qemu with support for the virtio-blk-vhost-vdpa device
and the ability to pass a /dev/fdset/N path for the vdpa path (8.1.0)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1900770
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
vDPA block devices will also need the same consideration for memlock
limits as other vdpa devices, so consider these devices when calculating
memlock limits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuInterfaceVDPAConnect() was a helper function for connecting to the
vdpa device file. But in order to support other vdpa devices besides
network interfaces (e.g. vdpa block devices) make this function a bit
more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check whether the qemu binary supports the vdpa block driver. We can't
rely simply on the existence of the virtio-blk-vhost-vdpa block driver
since the first releases of qemu didn't support fd-passing for this
driver. So we have to check for the 'fdset' feature on the driver
object. This feature will be present in the qemu 8.1.0 release and was
merged to qemu in commit 98b126f5.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Inside of virSetUIDGIDWithCaps() there's a naked call to
capng_apply(), i.e. without any retval check. This is potentially
dangerous as capng_apply() may fail. Do the check and report an
error.
This also fixes the build on bleeding edge distros - like Fedora
rawhide - where the function is declared with 'warn unused
result' [1].
1: a0743c335c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Added in v0.6.5~14 the call to capng_get_caps_process() inside of
lxcContainerDropCapabilities() is not really explained in the
commit message. But looking into the libcap-ng sources it's to
initialize the internal state of the library.
But with recent libcap-ng commit [1] (which some bleeding edge
distros - like Fedora rawhide - already picked up) the function
has been marked as 'warn unused result'. Well, check for its
retval then.
1: a0743c335c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Refactor the version processing logic in ch driver to support versions
from non-release cloud-hypervisor binaries. This version also supports
versions with branch prefixes in them.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When configuring OVS interfaces/bridges we spawn 'ovs-vsctl' with
appropriate arguments and if it exited with a non-zero status we
report a generic error message, like "Unable to add port vnet0 to
OVS bridge ovsbr0". This is all cool, but the real reason why
operation failed is hidden in (debug) logs because that's where
virCommandRun() reports it unless caller requested otherwise.
This is a bit clumsy because then we have to ask users to turn on
debug logs and reproduce the problem again, e.g. [1].
Therefore, in cases where an error is reported to the user - just
read ovs-vsctl's stderr and include it in the error message. For
other cases (like VIR_DEBUG/VIR_WARN) - well they are meant to
end up in (debug) logs anyway.
1: https://mail.openvswitch.org/pipermail/ovs-discuss/2023-September/052640.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This was added in qemu commit 166b174188.
No additional features had to be added to libvirt.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The script that synchronizes cpu models from qemu,
sync_qemu_models_i386.py, ignores all features that begin with
"vmx-". Do the same for synchronizing cpu features so we do not
have to track irrelevant features individually.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function was used only to fill the cpu models into fake
capabilities, whic no longer exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer needed in tests as we are no longer adding fake machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virQEMUCapsAddCPUDefinitions' is used solely to populate fake cpu
models for the fake-caps tests. Note that and also populate the 'type'
field so that default cpu type can be propagated properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'display' option for the 'vfio-pci' device was added in qemu-2.12
and can't be compiled out. Assume support for the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
