Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.
This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Drivers were inconsistent when presented both --live and --config
at once. For example, within qemu, getting memory parameters
favored live, getting blkio tuning favored config, and getting
scheduler parameters errored out. Also, some, but not all,
attempts to mix flags on query were filtered at the virsh level.
We shouldn't have to duplicate efforts in every client app, nor
in every driver. So, it is simpler to just enforce that the two
flags cannot both be used at once on query operations, which has
precedent in libvirt.c, and which matches the documentation of
virDomainModificationImpact.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters)
(virDomainGetSchedulerParametersFlags, virDomainGetVcpuPinInfo):
Borrow sanity checking from virDomainGetVcpusFlags.
The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).
Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.
Add the core functions that implement the functionality of the API.
Suspend is done by using an asynchronous mechanism so that we can return
the status to the caller before the host gets suspended. This asynchronous
operation is achieved by suspending the host in a separate thread of
execution. However, returning the status to the caller is only best-effort,
but not guaranteed.
To resume the host, an RTC alarm is set up (based on how long we want to
suspend) before suspending the host. When this alarm fires, the host
gets woken up.
Suspend-to-RAM operation on a host running Linux can take upto more than 20
seconds, depending on the load of the system. (Freezing of tasks, an operation
preceding any suspend operation, is given up after a 20 second timeout).
And Suspend-to-Disk can take even more time, considering the time required
for compaction, creating the memory image and writing it to disk etc.
So, we do not allow the user to specify a suspend duration of less than 60
seconds, to be on the safer side, since we don't want to prematurely declare
failure when we only had to wait for some more time.
This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.
virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.
Given that we can now handle the target's disk shorthand, in addition
to an absolute path to the file or block device used on the host,
the term 'disk' fits a bit better as the parameter name than 'path'.
* include/libvirt/libvirt.h.in: Update some parameter names.
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainBlockPeek, virDomainGetBlockInfo, virDomainBlockJobAbort)
(virDomainGetBlockJobInfo, virDomainBlockJobSetSpeed)
(virDomainBlockPull): Likewise.
Commit 89b6284f made it possible to pass either a source name or
the target device to most API demanding a disk designation, but
forgot to update the documentation. It also failed to update
virDomainBlockStats to take both forms. This patch fixes both the
documentation and the remaining function.
Xen continues to use just device shorthand (that is, I did not
implement path lookup there, since xen does not track a domain_conf
to quickly tie a path back to the device shorthand).
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainGetBlockInfo, virDomainBlockPeek)
(virDomainBlockJobAbort, virDomainGetBlockJobInfo)
(virDomainBlockJobSetSpeed, virDomainBlockPull): Document
acceptable disk naming conventions.
* src/qemu/qemu_driver.c (qemuDomainBlockStats)
(qemuDomainBlockStatsFlags): Allow lookup by source name.
* src/test/test_driver.c (testDomainBlockStats): Likewise.
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
When configuring a URI alias like this in 'libvirt.conf':
uri_aliases = [
"jj#j=qemu+ssh://root@127.0.0.1/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
virsh -c jj#j
It will show this error message:
'no connection driver available for No connection for URI jj#j'
Actually，we expect this message below：
Malformed 'uri_aliases' config entry 'jj#j=qemu+ssh://root@127.0.0.1/system', aliases may only contain 'a-Z, 0-9, _, -'
Give this patch to fix this error.
This allows strings to be transported between client and server
in the context of name-type-value virTypedParameter functions.
For compatibility,
o new clients will not send strings to old servers, based on
a feature check
o new servers will not send strings to old clients without the
flag VIR_TYPED_PARAM_STRING_OKAY; this will be enforced at
the RPC layer in the next patch, so that drivers need not
worry about it in general. The one exception is that
virDomainGetSchedulerParameters lacks a flags argument, so
it must not return a string; drivers that forward that
function on to virDomainGetSchedulerParametersFlags will
have to pay attention to the flag.
o the flag VIR_TYPED_PARAM_STRING_OKAY is set automatically,
based on a feature check (so far, no driver implements it),
so clients do not have to worry about it
Future patches can then enable the feature on a per-driver basis.
This patch also ensures that drivers can blindly strdup() field
names (previously, a malicious client could stuff 80 non-NUL bytes
into field and cause a read overrun).
* src/libvirt_internal.h (VIR_DRV_FEATURE_TYPED_PARAM_STRING): New
driver feature.
* src/libvirt.c (virTypedParameterValidateSet)
(virTypedParameterSanitizeGet): New helper functions.
(virDomainSetMemoryParameters, virDomainSetBlkioParameters)
(virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainGetMemoryParameters, virDomainGetBlkioParameters)
(virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags, virDomainBlockStatsFlags):
Use them.
* src/util/util.h (virTypedParameterArrayClear): New helper
function.
* src/util/util.c (virTypedParameterArrayClear): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
virDomainBlockStatsFlags was missing a check that was present in
virDomainGetMemoryParameters. Additionally, I found that the
existing descriptions were a bit hard to read. A later patch
will fix qemu to return fewer than max parameters if @nparams
was too small on input.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters, virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags):
Tweak documentation wording.
(virDomainBlockStatsFlags): Likewise, and add sanity check.
with /etc/libvirt/libvirt.conf below:
uri_aliases = [
"hail=qemu:///system",
"sleet=qemu+ssh://root 9 115 122 57/system",
"sam=qemu+unix:///system?socket=/var/run/libvirt/libvirt-sock",
]
Neither "virsh -c hailly" nor "hai" should result in matching "hail=qemu:///system"
Fix URI alias prefix matching when connecting
Signed-off-by: Wen Ruo Lv <lvroyce@linux.vnet.ibm.com>
The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing
* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING
Based on a report by Coverity. waitpid() can leak resources if it
fails with EINTR, so it should never be used without checking return
status. But we already have a helper function that does that, so
use it in more places.
* src/lxc/lxc_container.c (lxcContainerAvailable): Use safer
virWaitPid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput, virtTestMain):
Likewise.
* src/libvirt.c (virConnectAuthGainPolkit): Simplify with virCommand.
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.
It allows one parameter
uri_aliases = [
"hail=qemu+ssh://root@hail.cloud.example.com/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES
* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
with no scheme
The previous API addition allowed traversal up the hierarchy;
this one makes it easier to traverse down the hierarchy.
In the python bindings, virDomainSnapshotNumChildren can be
generated, but virDomainSnapshotListChildrenNames had to copy
from the hand-written example of virDomainSnapshotListNames.
* include/libvirt/libvirt.h.in (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New prototypes.
(VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS): New flag alias.
* src/libvirt.c (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New functions.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSnapshotNumChildren)
(virDrvDomainSnapshotListChildrenNames): New callbacks.
* python/generator.py (skip_impl, nameFixup): Update lists.
* python/libvirt-override-api.xml: Likewise.
* python/libvirt-override.c
(libvirt_virDomainSnapshotListChildrenNames): New wrapper function.
Although reverting to a snapshot is a form of data loss, this is
normally expected. However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play. Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.
Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
Although a client can already obtain a snapshot's parent by
dumping and parsing the xml, then doing a snapshot lookup by
name, it is more efficient to get the parent in one step, which
in turn will make operations that must traverse a snapshot
hierarchy easier to perform.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetParent):
Declare.
* src/libvirt.c (virDomainSnapshotGetParent): New function.
* src/libvirt_public.syms: Export it.
* src/driver.h (virDrvDomainSnapshotGetParent): New callback.
Documentation did not specify, that some permissions are required on
target path for coredump for the user running the hypervisor.
Diff to v1:
- reword statements
These functions access internals of the opaque object, and do
not need any rpc counterpart. It could be argued that we should
have provided these when snapshot objects were first introduced,
since all the other vir*Ptr objects have at least a GetName accessor.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): Declare.
* src/libvirt.c (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): New
functions.
* src/libvirt_public.syms: Export them.
Prior to this patch, <domainsnapshot>/<disks> was ignored. This
changes it to be an error unless an explicit disk snapshot is
requested (a future patch may relax things if it turns out to
be useful to have a <disks> specification alongside a system
checkpoint).
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Disk
snapshots not supported yet.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Likewise.
Since a snapshot is fully recoverable, it is useful to have a
snapshot as a means of hibernating a guest, then reverting to
the snapshot to wake the guest up. This mode of usage is
similar to 'virsh save/virsh restore', except that virsh
save uses an external file while virsh snapshot keeps the
vm state internal to a qcow2 file. However, it only works on
persistent domains.
In the usage pattern of snapshot/revert for hibernating a guest,
there is no need to keep the guest running between the two points
in time, especially since that would generate runtime state that
would just be discarded. Add a flag to make it possible to
stop the domain after the snapshot has completed.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_HALT):
New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotCreateActive): Implement it.
Reverting to a state prior to an external snapshot risks
corrupting any other branches in the snapshot hierarchy that
were using the snapshot as a read-only backing file. So
disk snapshot code will default to preventing reverting to
a snapshot that has any children, meaning that deleting just
the children of a snapshot becomes a useful operation in
preparing that snapshot for being a future reversion target.
The code for the new flag is simple - it's one less deletion,
plus a tweak to keep the current snapshot correct.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it, and
enforce mutual exclusion.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Implement
it.
Just like VM saved state images (virsh save), snapshots MUST
track the inactive domain xml to detect any ABI incompatibilities.
The indentation is not perfect, but functionality comes before form.
Later patches will actually supply a full domain; for now, this
wires up the storage to support one, but doesn't ever generate one
in dumpxml output.
Happily, libvirt.c was already rejecting use of VIR_DOMAIN_XML_SECURE
from read-only connections, even though before this patch, there was
no information to be secured by the use of that flag.
And while we're at it, mark the libvirt snapshot metadata files
as internal-use only.
* src/libvirt.c (virDomainSnapshotGetXMLDesc): Document flag.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Add member.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Update signature.
* src/conf/domain_conf.c (virDomainSnapshotDefFree): Clean up.
(virDomainSnapshotDefParseString): Optionally parse domain.
(virDomainSnapshotDefFormat): Output full domain.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotGetXMLDesc): Update callers.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML)
(vboxDomainSnapshotGetXMLDesc): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotLoad, qemuDomainSnapshotGetXMLDesc)
(qemuDomainSnapshotWriteMetadata): Likewise.
* docs/formatsnapshot.html.in: Rework doc example.
Based on a patch by Philipp Hahn.
Just as leaving managed save metadata behind can cause problems
when creating a new domain that happens to collide with the name
of the just-deleted domain, the same is true of leaving any
snapshot metadata behind. For safety sake, extend the semantic
change of commit b26a9fa9 to also cover snapshot metadata as a
reason to reject undefining an inactive domain. A future patch
will make sure that shutdown of a transient domain automatically
deletes snapshot metadata (whether by destroy, shutdown, or
guest-initiated action). Management apps of transient domains
should take care to capture xml of snapshots, if it is necessary
to recreate the snapshot metadata on a later transient domain
with the same name and uuid.
This also documents a new flag that hypervisors can choose to
support as a shortcut for taking care of the metadata as part of
the undefine process; however, nontrivial driver support for these
flags will be deferred to future patches.
Note that ESX and VBox can never be transient; therefore, they
do not have to worry about automatic cleanup after shutdown
(the persistent domain still remains); likewise they never
store snapshot metadata, so the undefine flag is trivial.
The nontrivial work remaining is thus in the qemu driver.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA): New flag.
* src/libvirt.c (virDomainUndefine, virDomainUndefineFlags):
Document new limitations and flag.
* src/esx/esx_driver.c (esxDomainUndefineFlags): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Likewise.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Enforce
the limitations.
The first two flags are essential for being able to replicate
snapshot hierarchies across multiple hosts, which will come in
handy for supervised migrations. It also allows a management app
to take a snapshot of a transient domain, save the metadata, stop
the domain, recreate a new transient domain by the same name,
redefine the snapshot, then revert to it.
This is not quite as convenient as leaving the metadata behind
after a domain is no longer around, but doing that has a few
problems: 1. the libvirt API can only delete snapshot metadata
if there is a valid domain handle to use to get to that snapshot
object - if stale data is left behind without a domain, there is
no way to request that the data be cleaned up. 2. creating a new
domain with the same name but different uuid than the older
domain where a snapshot existed cannot use the older snapshot
data; this risks confusing libvirt, and forbidding the stale
data is similar to the recent patch to forbid stale managed save.
The first two flags might be useful on hypervisors with no metadata,
but only for modifying the notion of the current snapshot;
however, I don't know how to do that for ESX or VBox.
The third flag is a convenience option, to combine a creation with
a delete metadata into one step. It is trivial for hypervisors
with no metadata.
The qemu changes will be involved enough to warrant a separate patch.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE)
(VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)
(VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotCreateXML): Document them, and
enforce mutual exclusion.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* docs/formatsnapshot.html.in: Document re-creation.
To make it easier to know when undefine will fail because of existing
snapshot metadata, we need to know how many snapshots have metadata.
Also, it is handy to filter the list of snapshots to just those that
have no parents; document that flag now, but implement it in later patches.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_ROOTS)
(VIR_DOMAIN_SNAPSHOT_LIST_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotListNames): Document them.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Implement trivial flag.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNum)
(qemuDomainSnapshotListNames): Likewise.
A future patch will make it impossible to remove a domain if it
would leave behind any libvirt-tracked metadata about snapshots,
since stale metadata interferes with a new domain by the same name.
But requiring snaphot contents to be deleted before removing a
domain is harsh; with qemu, qemu-img can still make use of the
contents after the libvirt domain is gone. Therefore, we need
an option to get rid of libvirt tracking information, but not
the actual contents. For hypervisors that do not track any
metadata in libvirt, the implementation is trivial; all remaining
hypervisors (really, just qemu) will be dealt with separately.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially
supported when there is no libvirt metadata.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise.
While it is nice that snapshots and saved images remember whether
the domain was running or paused, sometimes the restoration phase
wants to guarantee a particular state (paused to allow hot-plugging,
or running without needing to call resume). This introduces new
flags to allow the control, and a later patch will implement the
flags for qemu.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SAVE_RUNNING)
(VIR_DOMAIN_SAVE_PAUSED, VIR_DOMAIN_SNAPSHOT_REVERT_RUNNING)
(VIR_DOMAIN_SNAPSHOT_REVERT_PAUSED): New flags.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags)
(virDomainManagedSave, virDomainSaveImageDefineXML)
(virDomainRevertToSnapshot): Document their use, and enforce
mutual exclusion.
This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.
The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed. By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.
If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present. If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error. Otherwise, mkfs
is executed and any data present on the device is overwritten.
If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.
There is no reason to forbid pausing an autodestroy domain
(not to mention that 'virsh start --paused --autodestroy'
succeeds in creating a paused autodestroy domain).
Meanwhile, qemu was failing to enforce the API documentation that
autodestroy domains cannot be saved. And while the original
documentation only mentioned save/restore, snapshots are another
form of saving that are close enough in semantics as to make no
sense on one-shot domains.
* src/qemu/qemu_driver.c (qemudDomainSuspend): Drop bogus check.
(qemuDomainSaveInternal, qemuDomainSnapshotCreateXML): Forbid
saves of autodestroy domains.
* src/libvirt.c (virDomainCreateWithFlags, virDomainCreateXML):
Document snapshot interaction.
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things. Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
When virStreamAbort is called on a stream that has not been used yet,
quite confusing error is returned: "this function is not supported by
the connection driver". Let's just ignore such streams as there's
nothing to abort anyway.
If migration failed on source daemon, the migration is automatically
canceled by the daemon itself. Thus we don't need to call
virDomainMigrateConfirm3(cancelled=1). Calling it doesn't cause any harm
but the resulting error message printed in logs may confuse people.
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
clang warning.
Detected by ccc-analyzer:
libvirt.c:4277:5: warning: Value stored to 'ret' is never read
ret = domain->conn->driver->domainMigrateConfirm3
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I was testing a virsh patch, and wanted to see if I had passed the
flags I thought. But with LIBVIRT_DEBUG in the environment, I just
saw:
14:24:52.359: 15022: debug : virDomainSnapshotNum:15586 : dom=0xc9c180, (VM: name=rhel_6-64, uuid=48f8e8e7-e14f-0e14-02f0-ce71997bdcab),
including a trailing space. This fixes the issues.
* src/libvirt.c: Log flag parameters, even if currently unused.
(VIR_DOMAIN_DEBUG_0): Drop trailing comma in log.
(VIR_DOMAIN_DEBUG_1): Split guts into...
(VIR_DOMAIN_DEBUG_2): ...new macro.
Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains. Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.
Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.
* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
must free() the returned path after use.
* how to reproduce?
% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
* actual results:
Detected in valgrind run:
==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
Signed-off-by: Alex Jia <ajia@redhat.com>
Make MIGRATION_OUT use the new helper methods.
This also introduces new protection to migration v3 process: the
migration job is held from Begin to Confirm to avoid changes to a domain
during migration (esp. between Begin and Perform phases). This change is
automatically applied to p2p and tunneled migrations. For normal
migration, this requires support from a client. In other words, if an
old (pre 0.9.4) client starts normal migration of a domain, the domain
will not be protected against changes between Begin and Perform steps.
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT,
so should virDomainGetVcpusFlags.
Unfortunately, the virsh counterpart 'virsh vcpucount' has already
commandeered --current for a different meaning, so teaching virsh
to expose this in the next patch will require a bit of care.
* src/libvirt.c (virDomainGetVcpusFlags): Allow
VIR_DOMAIN_AFFECT_CURRENT.
* src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise.
* src/test/test_driver.c (testDomainGetVcpusFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks. To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.
Also, virDomainGetXMLDesc didn't document its flags.
* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.
This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.
The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.
Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.
In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag. But virDomainSave was implemented
before our policy of all new APIs having a flag argument. Likewise
for virDomainRestore when restoring from a file.
The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.
* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.
This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.
Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.
This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.
There were two API in driver.c that were silently masking flags
bits prior to calling out to the drivers, and several others
that were explicitly masking flags bits. This is not
forward-compatible - if we ever have that many flags in the
future, then talking to an old server that masks out the
flags would be indistinguishable from talking to a new server
that can honor the flag. In general, libvirt.c should forward
_all_ flags on to drivers, and only the drivers should reject
unknown flags.
In the case of virDrvSecretGetValue, the solution is to separate
the internal driver callback function to have two parameters
instead of one, with only one parameter affected by the public
API. In the case of virDomainGetXMLDesc, it turns out that
no one was ever mixing VIR_DOMAIN_XML_INTERNAL_STATUS with
the dumpxml path in the first place; that internal flag was
only used in saving and restoring state files, which happened
to be in functions internal to a single file, so there is no
mixing of the internal flag with a public flags argument.
Additionally, virDomainMemoryStats passed a flags argument
over RPC, but not to the driver.
* src/driver.h (VIR_DOMAIN_XML_FLAGS_MASK)
(VIR_SECRET_GET_VALUE_FLAGS_MASK): Delete.
(virDrvSecretGetValue): Separate out internal flags.
(virDrvDomainMemoryStats): Provide missing flags argument.
* src/driver.c (verify): Drop unused check.
* src/conf/domain_conf.h (virDomainObjParseFile): Delete
declaration.
(virDomainXMLInternalFlags): Move...
* src/conf/domain_conf.c: ...here. Delete redundant include.
(virDomainObjParseFile): Make static.
* src/libvirt.c (virDomainGetXMLDesc, virSecretGetValue): Update
clients.
(virDomainMemoryPeek, virInterfaceGetXMLDesc)
(virDomainMemoryStats, virDomainBlockPeek, virNetworkGetXMLDesc)
(virStoragePoolGetXMLDesc, virStorageVolGetXMLDesc)
(virNodeNumOfDevices, virNodeListDevices, virNWFilterGetXMLDesc):
Don't mask unknown flags.
* src/interface/netcf_driver.c (interfaceGetXMLDesc): Reject
unknown flags.
* src/secret/secret_driver.c (secretGetValue): Update clients.
* src/remote/remote_driver.c (remoteSecretGetValue)
(remoteDomainMemoryStats): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryStats): Likewise.
* daemon/remote.c (remoteDispatchDomainMemoryStats): Likewise.
This patch extends virDomainSetVcpusFlags API to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Now because most APIs accept VIR_DOMAIN_AFFECT_CURRENT flags,
virDomainSetVcpusFlags API should also do.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value. In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types. Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).
The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.
This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.
* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.
We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.
The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains. While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Integer overflow and remote code are never a nice mix.
This has existed since commit 56cd414.
* src/libvirt.c (virDomainGetVcpus): Reject overflow up front.
* src/remote/remote_driver.c (remoteDomainGetVcpus): Avoid overflow
on sending rpc.
* daemon/remote.c (remoteDispatchDomainGetVcpus): Avoid overflow on
receiving rpc.
When adding virDomainGetVcpusFlags in commit ea3f5c6, I did
enough rebasing that the doc comments in libvirt.c no longer
matched the final chosen enum names in libvirt.h.
And now we've gone ahead and deprecated the names
VIR_DOMAIN_VCPU_{LIVE,CONFIG}.
* src/libvirt.c (virDomainGetVcpusFlags): Fix comment.
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.
* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
commands
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.
* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
Qemu once supported following memory stats which will returned by
"query_balloon":
stat_put(dict, "actual", actual);
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.
libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
Detected by Coverity. Commit a98d8f0d tried to make uuid debugging
more robust, but missed some APIs. And on the APIs that it visited,
the mere act of preparing the debug message ends up dereferencing
uuid prior to the null check. Which means the APIs which are supposed
to gracefully reject NULL arguments now end up with SIGSEGV.
* src/libvirt.c (VIR_UUID_DEBUG): New macro.
(virDomainLookupByUUID, virDomainLookupByUUIDString)
(virNetworkLookupByUUID, virNetworkLookupByUUIDString)
(virStoragePoolLookupByUUID, virStoragePoolLookupByUUIDString)
(virSecretLookupByUUID, virSecretLookupByUUIDString)
(virNWFilterLookupByUUID, virNWFilterLookupByUUIDString): Avoid
null dereference.
virGetVersion itself doesn't take a virConnectPtr, but in order to obtain
the hypervisor version against which libvirt was compiled it is used in
combination with virConnectGetType like this:
hvType = virConnectGetType(conn)
virGetVersion(&libVer, hvType, &typeVer)
When virConnectGetType is called on a remote connection then the remote
driver returns the type of the underlying driver on the server side, for
example QEMU. Then virGetVersion compares hvType to a set of strings that
depend on configure options and returns LIBVIR_VERSION_NUMBER in most
cases. Now this fails in case libvirt on the client side is just compiled
with the remote driver enabled only and the server side has the actual
driver such as the QEMU driver. It just happens to work when the actual
driver is enabled on client and server side. But that's not always true.
I noticed this on FreeBSD:
freebsd# virsh -c qemu+tcp://192.168.178.22/system version
Compiled against library: libvir 0.9.2
error: failed to get the library version
error: this function is not supported by the connection driver: virGetVersion
This is not FreeBSD specific, happens on Windows as well due to the
similar driver support configuration. The problem is that virConnectGetType
returns QEMU, but virGetVersion on the client side only accepts Remote
as hvType due to all other drivers being disabled on the client side.
Daniel P. Berrange suggested to get rid of all the conditional code in
virGetVersion, ignoring the hvType and always setting typeVer to
LIBVIR_VERSION_NUMBER. virConnectGetVersion is supposed to be used to
obtain the hypervisor version.
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.
Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).
* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.
Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
Update for API change
When doing migration, if an error occurs in Perform, it must not
be overwritten during Finish/Confirm steps. If an error occurs
in Finish, it must not be overwritten in Confirm.
Previous commit a9d12c2444 added
code to qemudDomainMigrateFinish2 to preserve the error. This
is not the right place, because it is not applicable in non-p2p
migration. The src/libvirt.c virDomainMigrateV2/3 methods need
code to preserve errors for non-p2p migration, while the
doPeer2PeerMigrate2 and doPeer2PeerMigrate3 methods contain
code to preverse errors for p2p migration.
Remove the bogus error preservation from qemudDomainMigrateFinish2
and qemudDomainMigrateFinish3.
Fix virDomainMigrateV3 and doPeer2PeerMigrate3 so that they
preserve any error hit during the Finish3 step, before invoking
Confirm3.
Finally if qemuMigrationFinish fails to resume the CPUs, it must
preserve the error before tearing down the VM, so that VM cleanup
doesn't overwrite it.
* src/libvirt.c: Preserve error before invoking Confirm3
* src/qemu/qemu_driver.c: Remove bogus error preservation
code in qemudDomainMigrateFinish2/qemudDomainMigrateFinish3
* src/qemu/qemu_migration.c: Preserve error before invoking Confirm3
and after resume fails in qemuMigrationFinish.
* src/libvirt.c: Add further debug lines in helper APIs for
migration
* src/qemu/qemu_migration.c: Add debug lines for all internal
migration API parameters
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications
- The explicit QEMU migration URI, while using Peer2Peer
migration
- An override for the target VM XML
This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements
* include/libvirt/libvirt.h.in,
src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
and virDomainMigrateToURI2
The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either
- A QEMU migration URI (normal migration)
- A libvirtd connection URI (peer2peer migration)
Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.
This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.
NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs: Add
the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Update to handle URIs correctly
This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.
If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.
The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.
NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs:
Add 'remote_string xmlin' parameter to begin3/perform3
RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Pass xmlin parameter around
migration methods
The internal virDomainMigratePeer2Peer and virDomainMigrateDirect
helper methods were not checking whether the target supports the
v3 migration protocol.
* src/libvirt.c: Use v3 migration protocol for p2p/direct
migration if available.
Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.
Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.
Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).
Add subset handling to libxl and test drivers.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.
Unify this to nparams being optional and document it.
virStreamNew needs to dispatch the error that virGetStream reports
on failure.
remoteCreateClientStream can fail due to virStreamNew or due to
VIR_ALLOC. Report OOM error for VIR_ALLOC failure to report errors
in all error cases.
Remove OOM error reporting from remoteCreateClientStream callers.
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.
I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
The v2 migration protocol was accidentally missing out the
finish step, when prepare succeeded, but returned an invalid
URI
* src/libvirt.c: Teardown VM if prepare returns invalid URI
Migration just seems to go from bad to worse. We already had to
introduce a second migration protocol when adding the QEMU driver,
since the one from Xen was insufficiently flexible to cope with
passing the data the QEMU driver required.
It turns out that this protocol still has some flaws that we
need to address. The current sequence is
* Src: DumpXML
- Generate XML to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Kill off VM if successful, resume if failed
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if unsuccessful
The problems with this are:
- Since the first step is a generic 'DumpXML' call, we can't
add in other migration specific data. eg, we can't include
any VM lease data from lock manager plugins
- Since the first step is a generic 'DumpXML' call, we can't
emit any 'migration begin' event on the source, or have
any hook that runs right at the start of the process
- Since there is no final step on the source, if the Finish
method fails to receive all migration data & has to kill
the VM, then there's no way to resume the original VM
on the source
This patch attempts to introduce a version 3 that uses the
improved 5 step sequence
* Src: Begin
- Generate XML to pass to dst
- Generate optional cookie to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Generate optional cookie to pass to dst
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if failed, resume if success
- Generate optional cookie to pass to src
* Src: Confirm
- Kill off VM if success, resume if failed
The API is designed to allow both input and output cookies
in all methods where applicable. This lets us pass around
arbitrary extra driver specific data between src & dst during
migration. Combined with the extra 'Begin' method this lets
us pass lease information from source to dst at the start of
migration
Moving the killing of the source VM out of Perform and
into Confirm, means we can now recover if the dst host
can't successfully Finish receiving migration data.
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
The public API and RPC over-the-wire format have no flags argument,
so neither should the internal callback API. This simplifies the
RPC generator.
* src/driver.h (virDrvNWFilterDefineXML): Drop argument that does
not match public API.
* src/nwfilter/nwfilter_driver.c (nwfilterDefine): Likewise.
* src/libvirt.c (virNWFilterDefineXML): Likewise.
* daemon/remote_generator.pl: Drop special case.
This one's tricker than the VIR_DEBUG0() removal, but the end
result is still C99 compliant, and reasonable with enough comments.
* src/libvirt.c (VIR_ARG10, VIR_HAS_COMMA)
(VIR_DOMAIN_DEBUG_EXPAND, VIR_DOMAIN_DEBUG_PASTE): New macros.
(VIR_DOMAIN_DEBUG): Rewrite to handle one argument, moving
multi-argument guts to...
(VIR_DOMAIN_DEBUG_1): New macro.
(VIR_DOMAIN_DEBUG0): Rename to VIR_DOMAIN_DEBUG_0.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
assert() is forbidden in libvirt code, and these two cases would
in fact never execute due to earlier error checks.
* src/libvirt.c: Remove assert() usage
This patch implements the code to support virDomainSetMaxMemory API,
and to support VIR_DOMAIN_MEM_MAXIMUM flag in qemudDomainSetMemoryFlags function.
As a result, we can change the maximum memory size of inactive QEMU guests.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Move "returns" keyword from beginning of API doc lines
when it does not describe return values.
Maybe the API doc extractor could be changed to look for
"returns: " to avoid such confusion.
This patch introduces VIR_DOMAIN_MEM_CURRENT flag and
modifies virDomainSetMemoryFlags function to support it.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
The current description suggests that you always have to provide
a valid typeVer pointer. But if you want only the libvirt version
it's also possible to set type and typeVer to NULL to skip the
hypervisor part.
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
This patch fix a simple bug in virDomainSetMemoryFlags function.
The patch sent before lacks the consideration of the case
where the driver doesn't support virDomainSetMemoryFlags API.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
As pointed on CVE-2011-1146, some API forgot to check the read-only
status of the connection for entry point which modify the state
of the system or may lead to a remote execution using user data.
The entry points concerned are:
- virConnectDomainXMLToNative
- virNodeDeviceDettach
- virNodeDeviceReAttach
- virNodeDeviceReset
- virDomainRevertToSnapshot
- virDomainSnapshotDelete
* src/libvirt.c: fix the above set of entry points to error on read-only
connections
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
A large number of return values used 'return (0)' instead
of simply 'return 0'. Remove all these redundant brackets
so the style is consistent throughout the file
* src/libvirt.c: Remove redundant brackets
The driver table only has 10 slots, but there are potentially
11 drivers that need activating. Improve the error message
when driver registration fails
* src/libvirt.c: Increase driver table size & improve errors
The virLibConnError() function (and related ones) do not correctly
report line number info. Turn them all into macros so line numbers
are reported correctly. Drop the connection object in all of them
since it is no longer used.
Also from the virLibConnWarning() equivalents completely. Now
that the Xen driver is running 100% inside libvirtd, those
codepaths for secondary drivers cannot be reached.
* src/libvirt.c: Replace error functions with macros
The public object is called NWFilter but the corresponding private
object is called NWFilterPool. I don't see compelling reasons for this
Pool suffix. One might argue that an NWFilter is a "pool" of rules, etc.
Remove the Pool suffix from NWFilterPool. No functional change included.
When we do peer2peer migration, the dest uri is an address of the
target host as seen from the source machine. So we must specify
the ip or hostname of target host in dest uri. If we do not specify
it, report an error to the user.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
The current security driver usage requires horrible code like
if (driver->securityDriver &&
driver->securityDriver->domainSetSecurityHostdevLabel &&
driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply
if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.
The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.
* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h
src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
src/security/security_dac.c, src/security/security_dac.h: Generic
versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
src/security/security_driver.c, src/security/security_driver.h,
src/security/security_selinux.c, src/security/security_selinux.h:
Update to take virSecurityManagerPtr object as the first param
in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs
Add VM name/UUID in log for domain related APIs.
Format: "dom=%p, (VM: name=%s, uuid=%s), param0=%s, param1=%s
*src/libvirt.c (introduce two macros: VIR_DOMAIN_DEBUG, and
VIR_DOMAIN_DEBUG0)
virDrvSupportsFeature API is allowed to return -1 on error while all but
one uses of VIR_DRV_SUPPORTS_FEATURE only check for (non)zero return
value. Let's make this macro return zero on error, which is what
everyone expects anyway.
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
The libvirt_util.la library was mistakenly linked into libvirtd
directly. Since libvirt_util.la is already linked to libvirt.so,
this resulted in libvirtd getting two copies of the code and
more critically 2 copies of static global variables.
Testing in turn exposed a issue with loadable modules. The
gnulib replacement functions are not exported to loadable
modules. Rather than trying to figure out the name sof all
gnulib functions & export them, just linkage all loadable
modules against libgnu.la statically.
* daemon/Makefile.am: Remove linkage of libvirt_util.la
and libvirt_driver.la
* src/Makefile.am: Link driver modules against libgnu.la
* src/libvirt.c: Don't try to load modules which were
compiled out
* src/libvirt_private.syms: Export all other internal
symbols that are required by drivers
Factors common checks (such as nonzero vcpu count) up front, but
drivers will still need to do additional flag checks.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpusFlags):
New functions.
(virDomainSetVcpus, virDomainGetMaxVcpus): Refer to new API.
* docs/formatdomain.html.in: Add memtune element details, added min_guarantee
* src/libvirt.c: Update virDomainGetMemoryParameters api description, make
it more clear that the user first needs to call the api to get the number
of parameters supported and then call again to get the values.
* tools/virsh.pod: Add usage of new command memtune in virsh manpage
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
Enabling debug doesn't show the capabilities XML for a connection.
Add an extra debug statement for the return value
* src/libvirt.c: Enable debug logging of capabilities XML
Add a pointer to the primary context of a connection and use it in all
driver functions that don't dependent on the context type. This includes
almost all functions that deal with a virDomianPtr. Therefore, using
a vpx:// connection allows you to perform all the usual domain related
actions like start, destroy, suspend, resume, dumpxml etc.
Some functions that require an explicitly specified ESX server don't work
yet. This includes the host UUID, the hostname, the general node info, the
max vCPU count and the free memory. Also not working yet are migration and
defining new domains.
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
This flag is used in migration prepare step to send updated XML
definition of a guest.
Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
Kind of minor, but it annoys me that the default auth callback
doesn't put a space between the prompt and the input, like a typical
terminal, ssh, etc. This patch changes the current prompt:
Please enter your authentication name:myuser
to
Please enter your authentication name: myuser
virDomain{Attach,Detach}Device is now only permitted on active
domains. Explicitly state this restriction in the API
documentation.
V2: Only change doc, dropping the hunk that forced the restriction
in libvirt frontend.
The virRaiseErrorFull() may invoke the error handler callback
functions an application has registered. This is not good
because the connection object may not be available at this
point, and the caller may be holding locks. This creates a
problem if the error handler calls back into libvirt.
The solutuon is to move invocation of the handler into the
final cleanup code in the public API entry points, where it
is guarenteed to have safe state.
* src/libvirt.c: Invoke virDispatchError() in all error paths
* src/util/virterror.c: Remove virSetConnError/virSetGlobalError,
replacing with virDispatchError(). Move invocation of the
error callbacks into virDispatchError() instead of the
virRaiseErrorFull function which is not in a safe context
Commit 33a198c1f6 increased the gcrypt
version requirement to 1.4.2 because the GCRY_THREAD_OPTION_VERSION
define was added in this version.
The configure script doesn't check for the gcrypt version. To support
gcrypt versions < 1.4.2 change the virTLSThreadImpl initialization
to use GCRY_THREAD_OPTION_VERSION only if it's defined.
GNUTLS uses gcrypt for its crypto functions. gcrypt requires
that the app/library initializes threading before using it.
We don't want to force apps using libvirt to know about
gcrypt, so we make virInitialize init threading on their
behalf. This location also ensures libvirtd has initialized
it correctly. This initialization is required even if libvirt
itself were only using one thread, since another non-libvirt
library (eg GTK-VNC) could also be using gcrypt from another
thread
* src/libvirt.c: Register thread functions for gcrypt
* configure.in: Add -lgcrypt to linker flags
This patch fixes the bug where paused/running state is not
transmitted during migration. As a result, in the QEMU driver
for example the machine was always started on the destination
end.
In order to do so, just read the state and if it is appropriate and
set the VIR_MIGRATE_PAUSED flag.
* src/libvirt.c (virDomainMigrateVersion1, virDomainMigrateVersion2):
Automatically add VIR_MIGRATE_PAUSED when appropriate.
* src/xen/xend_internal.c (xenDaemonDomainMigratePerform): Give a nicer
error message when migration of paused domains is attempted.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
src/lxc/lxc_controller.c src/node_device/node_device_hal.c
src/openvz/openvz_conf.c src/qemu/qemu_driver.c
src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
src/storage/storage_backend_disk.c src/storage/storage_driver.c
src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
review and those are the fixes correcting the problems
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
The code for tunnelled migration wierdly required the app to pass
a NULL 'dconn' parameter, only to have to use virConnectOpen
itself shortly thereafter to get a 'dconn' object. Remove this
bogus check & require the app to always pas 'dconn' as before
* src/libvirt.c: Require 'dconn' for virDomainMigrate calls again
and remove call to virConnectOpen
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Function comments for virStreamEvent{Add,Update,Remove}Callback() are
missing a trailing ':'. Therefore apibuild.py fails to parse the comment
and warns about the missing ':'.
* docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py
* src/libvirt.c: add missing ':' in function comments
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
The python method help docs are copied across from the C
funtion comments, but in the process all line breaks and
indentation was being lost. This made the resulting text
and code examples completely unreadable. Both the API
doc extractor and the python generator were destroying
whitespace & this fixes them to preserve it exactly.
* docs/apibuild.py: Preserve all whitespace when extracting
function comments. Print function comment inside a <![CDATA[
section to fully preserve all whitespace. Look for the
word 'returns' to describe return values, instead of 'return'
to avoid getting confused with code examples including the
C 'return' statement.
* python/generator.py: Preserve all whitespace when printing
function help docs
* src/libvirt.c: Change any return parameter indicated by
'return' to be 'returns', to avoid confusing the API extractor
* docs/libvirt-api.xml: Re-build for fixed descriptions
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
Add a VIR_SECRET_GET_VALUE_INTERNAL_CALL flag value, replacing the
originally separate libvirt_internal_call parameter. The flag is used
to differentiate external virSecretGetValue() calls from internal calls
by libvirt drivers that need to use the secret even if it is private.
* src/libvirt_internal.h Remove VIR_DOMAIN_XML_FLAGS_MASK
* src/driver.h Add VIR_SECRET_GET_VALUE_FLAGS_MASK constant and
VIR_SECRET_GET_VALUE_INTERNAL_CALL. Re-add the
VIR_DOMAIN_XML_FLAGS_MASK constant
* src/libvirt.c (virSecretGetValue): Don't allow the user to specify
internal flags.
* src/libvirt.c (virStoragePoolSetAutostart): Return -1 if the pool
argument is invalid, rather than "goto error" where we could dereference
that possibly-NULL "pool".
(virConnectFindStoragePoolSources): Likewise.
(virConnectNumOfDomains): Likewise.
Daniel P. Berrange spotted that the two latter functions
needed the same treatment.
Paolo Bonzini points out that in my refactoring of the code for
virDomainMigrate(), I added a check for the return value from
virDomainMigratePerform(). The problem is that we don't want to
exit if we fail, we actually want to go on and do
virDomainMigrateFinish2() with a non-0 return code to clean things
up. Remove the check.
While reproducing this issue, I also noticed that we wouldn't
always properly propagate an error message. In particular, I
found that if you blocked off the migration ports (with iptables)
and then tried the migration, it would actually fail but we would
get no failure output from Qemu. Therefore, we would think we
succeeded, and leave a huge mess behind us. Execute the monitor
command "info migrate", and look for a failure string in there
as well.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
The documentation for virNodeGetCellsFreeMemory claims the values
returned are in kilobytes, but that's actually wrong; the value
returned is actually in bytes. Fix up the documentation to be
correct.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Currently the reference counting for connections is busted. I
first noticed it while trying to use virConnectRef; it would
eventually cause a crash in the remote_internal driver, although
that was really just a victim. Really, we should only call the
close callbacks on the methods when the references drop to 0. To
accomplish this, move all of the close callbacks into
virUnrefConnect (since there are lots of internal users of that
function), and arrange for virConnectClose to call that.
V2: Make sure to drop the connection lock before we call the close
callbacks, otherwise we could deadlock the daemon
V3: Fix up a crash when we got an error from one of the drivers
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Re-factor virDomainMigrate to split out the version 1 and version 2
protocols into their own functions. In reality, the two versions share
very little in common, so forcing them together in the same function was
just confusing. This will also make adding tunnelled migration easier.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/logging.c src/logging.h src/libvirt_private.syms:
define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
unified functions
* src/libvirt.c src/logging.c: Don't convert high priority levels to the
debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
when they're set to the empty string. Warn when the user specifies an
invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings
Do the check in libvirt.c, to save drivers from the burden. This changes
behavior slightly in the qemu driver: we no longer explictly error if
passed an empty string. An error will still be thrown when the device
lookup fails.
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.
Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.
* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK
* src/libvirt.c: reject private flags in virDomainGetXMLDesc()
* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS
* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
virDomainSaveStatus
* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
breaking syntax checking
* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces
and virDrvListDefinedInterfaces
* src/libvirt.c: implements the entry points, calling new driver
functions
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx]
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h
qemud/remote_dispatch_table.h src/remote_internal.c: implement the
client/server side of the RPC
* src/remote_internal.c: Disable libvirtd autostart if the
LIBVIRT_AUTOSTART=0 env variable is set
* src/libvirt.c: Document environment variables can impact
the virConnectOpen API
* qemud/remote.c: Send back the actual libvirt connection error
rather than formatting a generic error for security driver
methods
* src/libvirt.c: Fix virDomainGetSecurityLabel, and
virNodeGetSecurityModel to correctly set the error on
the virConnectPtr object, and raise a full error rather
than warning when not supported
* src/libvirt.c src/virterror.c: fix some missing comments in public
modules.
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html:
regenerated documentation
* po/*: updated the polish localization and regenerated
Daniel
* src/Makefile.am src/libvirt.c src/libvirt_private.syms src/logging.c
src/logging.h src/util.c src/libvirt_debug.syms: big cleanup of
the debug configuration option and code by Amy Griffis
daniel
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
src/vbox/vbox_tmpl.c: integration of the VirtualBox support
patches by Pritesh Kothari
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_public.syms
src/lxc_driver.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/uml_driver.c: add the public APIs for
virNodeDeviceDettach virNodeDeviceReAttach and virNodeDeviceReset
and extends the driver structure accordingly.
Daniel
The 'getVer' fix introducted in d88d459d [Allow remote://hostname/
style URIs for automatic driver probe...] breaks compiling libvirt
with loadable module support. Work around this to get it building again.
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org>
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
generation time
daniel
* qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x src/driver.h src/libvirt.c
src/libvirt_internal.h src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/test.c src/virsh.c: large patch to
add migration support for KVM/QEmu, based on the work of Rich Jones
and Chris Lalancette. This introduce a new version of the prepare
and finish steps of the migration, so changes the driver API and
a lot of code.
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
* src/qemu_conf.c: patch from Cole Robinson to report in the
capabilities only the ones where the emulators is actually found
* po/libvirt.pot: regenerated
* src/libvirt.c: small typo fix
Daniel
docs/libvirt-refs.xml docs/html/libvirt-libvirt.html src/libvirt.c:
fixed somedocs and API entry point descriptions as suggested by
Charles Duffy and regenerated the API descriptions.
Daniel
* include/libvirt/libvirt.h.in, src/libvirt.c, src/driver.h,
src/libvirt_sym.version: New virDomainMemoryPeek API.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for remote.
* src/qemu_driver.c: QEMU driver implementation of API.
* src/test.c: Test driver (null) implementation of API.
* docs/hvsupport.html.in: Document API.
* libvirt.spec.in: New path /var/cache/libvirt for temporary
storage of memory images.
* qemud/libvirtd.init.in: Remove any old temp files in
/var/cache/libvirt on restarts.
* src/Makefile.am: make install creates /var/cache/libvirt.
* configure.in: Detect mkdir -p.
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
Mon May 12 23:32:21 PST 2008 David L. Leskovec <dlesko@linux.vnet.ibm.com>
* qemud/qemud.c: get siginfo with signals, distribute to drivers that
register a handler
* src/driver.h: add sighandler function to state driver table
* src/internal.h: define virStateSigDispatcher functions
* src/libvirt.c: add __virStateSigDispatcher function
* src/libvirt_sym.version: add __virStateSigDispatcher
* src/lxc_driver.c: add sig handler function, cleanup vm when sigchld
received from container process
* src/qemu_driver.c: NULL for sig handler (no handler) in state driver
* src/remote_internal.c: NULL for sig handler (no handler) in state driver
* src/storage_driver.c: NULL for sig handler (no handler) in state driver
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
* docs//* src/conf.c src/hash.c src/libvirt.c src/proxy_internal.c
src/remote_internal.c src/virsh.c src/xen_internal.c
src/xend_internal.c src/xml.c: applied patch from Atsushi SAKAI
fixing a lot of typos
Daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
Applied 3 patches from Dave Leskovec for intial support of
Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel
src/libvirt.c src/qemu.conf src/remote_internal.c src/xend_internal.c
tests/confdata/libvirtd.conf tests/confdata/libvirtd.out: patch from
Atsushi SAKAI fixing a ot more typo
Daniel
src/remote_internal.c src/test.c src/util.c src/util.h
src/xen_unified.c: added probe interface at the driver level,
use that to improve default hypervisor selection in the absence
of a given URI when connecting
Daniel
Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
A NUL byte at beginning of input, or just after a newline
would provoke an invalid buf[-1] access (possible segfault).
* src/libvirt.c (virConnectAuthCallbackDefault):
* configure.in: xdr functions may require -lxdr.
* configure.in, src/Makefile.am: Extra linking flags for
building libvirt DLL.
* src/socketcompat.h: Hide Windows Winsock incompatibilities
in a separate header file.
* src/remote_internal.c: Switch to using socketcompat.h /
socket_errno().
* src/test.c: Switch to using socketcompat.h.
* gnulib/lib/arpa/.cvsignore: Ignore another generated file.
* src/qparams.c: Include <config.h>.
* src/console.c, src/console.h, src/virsh.c: Disable
text console on Windows.
* src/libvirt.c: Use replacement getpass from Gnulib.
* src/libvirt.c: Initialize Winsock before use.
* src/remote_internal.c: Header file fixes for Windows.
Don't fail if AI_ADDRCONFIG isn't defined. Disable
unsupported stuff under Windows.
* src/uuid.c: ENODATA unavailable on Windows, use EIO instead.
* src/virsh.c: No uid_t / getuid on Windows.
* src/virsh.c: No O_SYNC on Windows.
* docs/hvsupport.html, docs/libvir.html: Document HV support
for virNodeGetFreeMemory and virNodeGetCellsFreeMemory.
* src/libvirt.c: Add DEBUG to virNodeGetFreeMemory and
virNodeGetCellsFreeMemory.
* src/xen_internal.c: virXenError* functions now take an
additional virConnectPtr argument, and set it where possible.
src/driver.h src/libvirt.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/xen_unified.c src/xend_internal.c: add new API
virNodeGetFreeMemory(), extends the driver. Lacks remote and
QEmu support though.
* src/libvirt.c: allows to fix virNodeGetCellsFreeMemory() adding
parameter check for startCell.
* proxy/libvirt_proxy.c src/xend_internal.[ch]
include/libvirt/libvirt.h include/libvirt/libvirt.h.in: applied
vncpasswd dump patch from Mark Johnson but with the
virDomainXMLFlags extension as suggested by Daniel Berrange
this changed a couple of internal APIs too
* tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: fix one of the
tests affected by bootloader dump change.
Daniel
src/qemu_driver.c src/remote_internal.c src/test.c
src/xen_internal.[ch] src/xen_unified.c src/xend_internal.[ch]
src/libvirt.c src/libvirt_sym.version: adding NUMA support patches
from Beth Kon adding new virNodeGetCellsFreeMemory entry point
and extending the virConnectGetCapabilities one. Fix a couple of
issues in the patch and add to exported symbols from shared lib.
* docs/virsh.pod docs/virsh.1 src/virsh.c: added new command
freecell to get the available memory on the node or in a NUMA cell.
* docs/*: updated and regenerated the documentation
Daniel
* src/libvirt.c (virDomainMigrate): Added virDomainMigrate
API call.
* src/xend_internal.c, src/xen_unified.c: Support for migration
of Xen domains.
* src/xen_internal.c: Xen capabilities indicates level of
support for migration.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for migration between remote hypervisors.
* src/virsh.c: Added 'virsh migrate' command.
* docs/libvir.html, docs/hvsupport.html: Updated hvsupport
documentation.
* qemud/remote.c, qemud/remote_protocol.x, src/driver.h,
src/internal.h, src/libvirt.c, src/libvirt_sym.version,
src/qemu_driver.c, src/remote_internal.c, src/test.c:
Add a private interface so that libvirt.c coordination
functions can detect the availability of features in
underlying drivers, using the VIR_DRV_SUPPORTS_FEATURE
macro.
applied patch from Shuveb Hussain to plug the developping
OpenVZ support. Disabled by default.
* src/openvz_conf.[ch] src/openvz_driver.[ch]: added new
OpenVZ driver files. Avoid a redefinition of readline().
Daniel
* include/libvirt/virterror.h, src/virterror.c, src/libvirt.c:
Add VIR_ERR_NO_DOMAIN and VIR_ERR_NO_NETWORK errors, which
indicate that there is no domain/network from vir*Lookup* functions.
* src/qemu_driver.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
* src/test.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
* include/libvirt/libvirt.h.in, src/libvirt.c, src/libvirt_sym.version,
python/generator.py: Added virDomainGetConnect and
virNetworkGetConnect to allow us to get the "hidden"
connection associated with each domain or network.
* qemud/remote.c, src/remote_internal.c: Fix virDomainGetVcpus
in the remote case.
* src/libvirt.c: Allow virConnectListDomains,
virConnectListDefinedDomains, virConnectListNetworks and
virConnectListDefinedNetworks to work in the case where
they are called with maxids/maxnames == 0.
* src/remote_internal.c: Fix virDomainGetMaxVcpus in remote
case so that it copies sufficient data.
* src/xen_unified.c: Remove autostart functions.
* src/libvirt.c, src/qemu_internal.c, src/test.c,
src/xen_unified.c, src/xend_internal.c,
src/libvirt.c, include/libvirt/virterror.h:
VIR_ERR_NO_SUPPORT means the function is not supported by
the hypervisor. VIR_ERR_NO_CONNECT means the connection
failed. VIR_ERR_CALL_FAILED is deprecated. Drivers which
decline a URI now no longer produce an error. Make
xen_unified.c ignore naked URI strings like "foo".
