If you trigger bug 1033369, we get the error message:
error from service: Invalid argument
Which is a bit too generic to pinpoint what is actually failing. This
changes it to:
error from service: CreateMachine: Invalid argument
Acked-by: Eric Blake <eblake@redhat.com>
This is the only callsite.
We drop use of localerror.name here, because it's not actually useful
to us: rather than the parameter name which received an invalid value
(which was assumed), it's actually the the dbus errno equivalent.
Just use the error string.
Acked-by: Eric Blake <eblake@redhat.com>
I got a build failure when cross-compiling to mingw with the
mingw64-dbus package installed:
CC virmockdbus_la-virmockdbus.lo
../../tests/virmockdbus.c:29:6: error: 'dbus_connection_set_change_sigpipe' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
VIR_MOCK_STUB_VOID_ARGS(dbus_connection_set_change_sigpipe,
^
../../tests/virmockdbus.c:33:18: error: 'dbus_bus_get' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
VIR_MOCK_STUB_RET_ARGS(dbus_bus_get,
...
Well duh - mingw lacks dlopen and friends, even if it can support
dbus. A similar failure occured in virsystemdtest.c; but in that
file, we know that systemd is a Linux-only concept.
* tests/virmockdbus.c: Cripple on mingw.
* tests/virsystemdtest.c: Cripple on non-Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
When doing an external checkpoint of a VM with no disk selected we'd
return failure but not set error code. This was a result of ret not
being set to 0 during walking of the disk array.
Rework early failure checking and set the error code to success before
iterating the array of disks so that we return success if no disks are
snapshotted.
Fixes the following symptom (or without --diskspec for diskless VMs)
$ virsh snapshot-create-as snapshot-test --memspec /tmp/asdf --diskspec hda,snapshot=no
error: An error occurred, but the cause is unknown
If neither disks nor memory are selected for snapshot we'd record
metadata in case of external snapshot and do a disk snapshot in case of
external disk snapshot. Forbid this as it doesn't make much sense.
For now, we set the migration URI via command line '--migrate_uri' or
construct the URI by looking up the dest host's hostname which could be
solved by DNS automatically.
But in cases the dest host have two or more NICs to reach, we may need to
send the migration data over a specific NIC which is different from the
automatically resolved one for some reason like performance, security, etc.
Thus we must explicitly specify the migrateuri in command line everytime,
but it is too troublesome if there are many such hosts (and don't forget
virt-manager).
This patch adds a configuration file option on dest host to save the
default value set which can be specified to a migration hostname or
one of this host's addresses used for transferring data, thus user doesn't
have to specify it in command line everytime.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inspired by a simpler patch from "Wangrui (K) <moon.wangrui@huawei.com>".
A submitted patch pointed out that virNetlinkCommand() was doing an
improper typecast of the return value from nl_recv() (int to
unsigned), causing it to miss error returns, and that even after
remedying that problem, virNetlinkCommand() was calling VIR_FREE() on
the pointer returned from nl_recv() (*resp) even if nl_recv() had
returned an error, and that in this case the pointer was verifiably
invalid, as it was pointing to memory that had been allocated by
libnl, but then freed prior to returning the error.
While reviewing this patch, I noticed several other problems with this
seemingly simple function (at least one of them as serious as the
problem being reported/fixed by the aforementioned patch), and decided
they all deserved to be fixed. Here is the list:
1) The return value from nl_recv() must be assigned to an int (rather
than unsigned int) in order to detect failure.
2) When nl_recv() returns an error or 0, the contents of *resp is
invalid, and should be simply set to 0, *not* VIR_FREE()'d.
3) When nl_recv() returns 0, errno is not set, so the logged error
message should not reference errno (it *is* an error though).
4) The first error return from virNetlinkCommand returns -EINVAL,
incorrectly implying that the caller can expect the return value to
be of the "-errno" variety, which is not true in any other case.
5) The 2nd error return returns directly with garbage in *resp. While
the caller should never use *resp in this case, it's still good
practice to set it to NULL.
6) For the next 5 (!!) error conditions, *resp will contain garbage,
and virNetlinkCommand() will goto it's cleanup code which will
VIR_FREE(*resp), almost surely leading to a segfault.
In addition to fixing these 6 problems, this patch also makes the
following two changes to make the function conform more closely to the
style of other libvirt code:
1) Change the handling of return code from "named rc and defaulted to
0, but changed to -1 on error" to the more common "named ret and
defaulted to -1, but changed to 0 on success".
2) Rename the "error" label to "cleanup", since the code that follows
is executed in success cases as well as failure.
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.
* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Old gcc complains about shadowing 'sync' variable:
../../src/qemu/qemu_agent.c: In function 'qemuAgentSetTime':
../../src/qemu/qemu_agent.c:1737: warning: declaration of 'sync'
shadows a global declaration [-Wshadow]
/usr/include/unistd.h:464: warning: shadowed declaration is here
[-Wshadow]
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The commit 84c59ffa improved the way we change ejectable media.
If for any reason the first "eject" didn't open the tray we
should return with error.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This partially reverts commits b279e52f7 and ea18f8b2.
It turns out our code base is full of:
if ((struct.member = virBlahFromString(str)) < 0)
goto error;
Meanwhile, the C standard says it is up to the compiler whether
an enum is signed or unsigned when all of its declared values
happen to be positive. In my testing (Fedora 20, gcc 4.8.2),
the compiler picked signed, and nothing changed. But others
testing with gcc 4.7 got compiler warnings, because it picked
the enum to be unsigned, but no unsigned value is less than 0.
Even worse:
if ((struct.member = virBlahFromString(str)) <= 0)
goto error;
is silently compiled without warning, but incorrectly treats -1
from a bad parse as a large positive number with no warning; and
without the compiler's help to find these instances, it is a
nightmare to maintain correctly. We could force signed enums
with a dummy negative declaration in each enum, or cast the
result of virBlahFromString back to int after assigning to an
enum value, or use a temporary int for collecting results from
virBlahFromString, but those actions are all uglier than what we
were trying to cure by directly using enum types for struct
values in the first place. It's better off to just live with int
members, and use 'switch ((virFoo) struct.member)' where we want
the compiler to help, than to track down all the conversions from
string to enum and ensure they don't suffer from type problems.
* src/util/virstorageencryption.h: Revert back to int declarations
with comment about enum usage.
* src/util/virstoragefile.h: Likewise.
* src/conf/domain_conf.c: Restore back to casts in switches.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_command.c: Add cast rather than revert.
Signed-off-by: Eric Blake <eblake@redhat.com>
With dynamic_ownership = 1 but no seclabels, RestoreChardevLabel
dereferences the NULL seclabel when checking if norelabel is set.
Remove this check, since it is already done in RestoreSecurityAllLabel
and if norelabel is set, RestoreChardevLabel is never called.
Each VM consists of a set of files in PCS: config, hard
disk images, log file, memory dump. All these files are stored
in a per-vm directory. When we create a new VM, we can ether specify
path to the VM or create the VM in a default path
(<default path>/<vm name>.pvm). This default path can be configured
with command
prlsrvctl user set --def-vm-home <path> command.
Currenty parallels driver creates VM in the same place, where first
hard disk is located. Let's change this logic and create VMs in
the default path. It will be much clearer and allow us to create
VMs without hard disks.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Disks support in this driver was implemented with an assumption,
that disk images can't be created by hand, without VM. So
complex storage driver was implemented with workaround.
This is not true, we can create new disks using ploop tool.
So the first step to reimplement disks support in parallels
driver is to do not use information from the storage driver,
until we will implement VIR_STORAGE_TYPE_VOLUME disks.
So after this patch disks can be added in the same way as
in any other driver: you create a disk image and then add
an entry to the XML definition of the domain with path to that
image file, for example:
<disk type='file' device='disk'>
<driver type='ploop'/>
<source file='/storage/harddisk1.hdd'/>
<target dev='sda' bus='sata'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
This patch makes parallels storage driver useless, but I'll fix it
later. Now you can create an image by hand, using ploop tool,
and then add it to some domain.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Set file format in virDomainDef structure to produce correct
XML in virDomainGetXMLDesc function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add VIR_STORAGE_FILE_PLOOP format. This format is used
to store disk images for virtual machines in PCS and containers
in PCS, OpenVZ and also in Parallels Desktop for Mac.
This format is described on OpenVZ site -
https://openvz.org/Ploop (together with ploop devices). It
consists of XML descriptor and one or more image files: base
image and deltas. Format of the image files described here:
https://openvz.org/Ploop/format.
This patch only adds VIR_STORAGE_FILE_PLOOP constant, consequent
patches will use it in parallels driver.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The domain definition is clearly used a few lines
below so there's no need to mark @def as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We allow a seclabel to be specified in the <source> element
of a chardev:
<serial type='file'>
<source path='/tmp/serial.file'>
<seclabel model='dac' relabel='no'/>
</source>
</serial>
But we format it outside the source:
<serial type='file'>
<source path='/tmp/serial.file'/>
<target port='0'/>
<seclabel model='dac' relabel='no'/>
</serial>
Move the formatting inside the source to fix this to make the
seclabel persistent across XML format->parse.
Introduced by commit f8b08d0 'Add <seclabel> to character devices.'
The DAC driver ignores the relabel='no' attribute in chardev config
<serial type='file'>
<source path='/tmp/jim/test.file'>
<seclabel model='dac' relabel='no'/>
</source>
<target port='0'/>
</serial>
This patch avoids labeling chardevs when relabel='no' is specified.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When relabel='no' at the domain level, there is no need to call
the hostdev relabeling functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=999301
The DAC driver ignores the relabel='no' attribute in disk config
<disk type='file' device='floppy'>
<driver name='qemu' type='raw'/>
<source file='/some/path/floppy.img'>
<seclabel model='dac' relabel='no'/>
</source>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
This patch avoid labeling disks when relabel='no' is specified.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
If relabel='no' at the domain level, no need to attempt relabeling
in virSecurityDAC{Set,Restore}SecurityAllLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Currently, the DAC security driver passes callback data as
void params[2];
params[0] = mgr;
params[1] = def;
Clean this up by defining a structure for passing the callback
data. Moreover, there's no need to pass the whole virDomainDef
in the callback as the only thing needed in the callbacks is
virSecurityLabelDefPtr.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In switch statements, use enum types since it is safer when
adding new items to the enum.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Annotate some static function parameters with ATTRIBUTE_NONNULL
and remove checks for NULL inputs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In a number of APIs, the text implied that a user might have
<target dev='xvda'/> - but common convention is to use "vda",
not "xvda". For example, virDomainGetDiskErrors was correct,
while virDomainBlockStats was confusing.
* src/libvirt.c: Make examples consistent.
Signed-off-by: Eric Blake <eblake@redhat.com>
For internal structs, we might as well be type-safe and let the
compiler help us with less typing required on our part (getting
rid of casts is always nice). In trying to use enums directly,
I noticed two problems in virstoragefile.h that can't be fixed
without more invasive refactoring: virStorageSource.format is
used as more of a union of multiple enums in storage volume
code (so it has to remain an int), and virStorageSourcePoolDef
refers to pooltype whose enum is declared in src/conf, but where
src/util can't pull in headers from src/conf.
* src/util/virstoragefile.h (virStorageNetHostDef)
(virStorageSourcePoolDef, virStorageSource): Use enums instead of
int for fields of internal types.
* src/qemu/qemu_command.c (qemuParseCommandLine): Cover all values.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Simplify clients.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskInternal): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Continuing the work of consistent enum cleanups; this time in
virstorageencryption.h.
* src/util/virstorageencryption.h (virStorageEncryptionFormat):
Convert to typedef, renaming to avoid collision with function.
(virStorageEncryptionSecret, virStorageEncryption): Directly use
enums.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code had some todo's about adding 'vdi' to the list of
virStorageType, but we've already done that.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Use enum value for vdi type.
Signed-off-by: Eric Blake <eblake@redhat.com>
One caveat though, qemu-ga is expecting time and returning time
in nanoseconds. With all the buffering and propagation delay, the
time is already wrong once it gets to the qemu-ga, but there's
nothing we can do about it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.
In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity complains about event being leaked in
qemuDomainCheckRemoveOptionalDisk. The best fix for it is to remove the
disk directly since we already know its index.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For now, if only '--wipe-storage' is assigned, user can undefine a
domain normally. But actually '--wipe-storage' doesn't do anything,
and this may confuse user. Better is to require that '--wipe-storage'
only works if the user specifies volumes to be removed.
Before:
$ virsh undefine virt-tests-vm1 --wipe-storage
Domain virt-tests-vm1 has been undefined
After:
$ virsh undefine virt-tests-vm1 --wipe-storage
error: '--wipe-storage' requires '--storage <string>' or '--remove-all-storage'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to snapshot (snapshot_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's better
to use a typedef for variable types, function types and other
usages. Other enumeration and folders will be changed to typedef's
in the future. Most of the files changed in this commit are related
to network filter (nwfilter_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When qemu driver is polling for migration to finish (in
qemuMigrationWaitForCompletion), it may happen that another job allowed
during migration is running and if it does not finish within 30 seconds,
migration would be cancelled because of that. However, we can just
ignore the timeout and let the waiting loop try again later.
If an event fired at the end of migration is ever implemented in QEMU,
we can just wait for the event instead of polling for migration status
and libvirt will behave consistently, i.e., migration won't be cancelled
in case another job started during migration takes long time to finish.
For bug https://bugzilla.redhat.com/show_bug.cgi?id=1083238
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As a side effect, the return value of qemuDomainObjEnterMonitorAsync is
not directly used as the return value of qemuProcess{Start,Stop}CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If job queue is full or waiting for a job times out, the function
returns -2 so that it can be handled in a different way by callers.
The change is safe since all existing callers of
qemuDomainObjBeginNestedJob check the return value to be less than zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
