Add a helper function virBhyveGetDomainTotalCpuStats() to
obtain process CPU time using kvm (kernel memory interface)
and use it to set cpuTime field of the virDomainInfo struct in
bhyveDomainGetInfo().
- do not lose new definition for an active domain
- do not leak oldDef
- do not set dom->id if virDomainSaveConfig() fails
- do not call virObjectUnlock(vm) if vm is NULL
Implement bhyveDomainCreateXML function.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Fix incorrect ATTRIBUTE_NONNULL usage introduced in 17b17565
which caused build failure:
bhyve/bhyve_driver.c:127:48: error: expected ')'
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
^
bhyve/bhyve_driver.c:127:27: note: to match this '('
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
Pushed under the build breaker rule.
At the beginning of the function we gain a reference to the driver
capabilities. Then, we call format function (*) which if failed, unref
over caps is called. Then, at the end another unref occurs.
* - Moreover, the format was not called over gained caps, but over
privconn->caps directly which is not allowed anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The driver passed as the only argument to the function should never be
NULL so there's no need to check it. After removing it, the whole
function collapses to a single line doing ref over driver
capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since b15a2bbd we have the new bhyve_capabilities.[ch] files.
However, the copyright is held by both Roman and Semihalf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
On failures, virBhyveProcessStart() does not cleanup network
interfaces that could be created by virBhyveProcessBuildBhyveCmd(),
which results in a leaked tap device.
To fix that, extract network cleanup code to bhyveNetCleanup()
and use it in cleanup stage of virBhyveProcessStart().
To ease mocking for bhyve unit tests move virBhyveTapGetRealDeviceName()
out of bhyve_command.c to virnetdevtap and rename it to
virNetDevTapGetRealDeviceName().
We use virBhyveTapGetRealDeviceName() to map network interface name
to a real device path, trying to open possible devices and getting
names by ioctl.
Make it skip devices that fail to open with EBUSY because they're
most likely already used by other VMs.
Part of a series of cleanups to use new accessor methods.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
New functionalities:
- connectGetMaxVcpus - on bhyve hardcode this value to 16
- nodeGetFreeMemory - do not use physmem_get on FreeBSD, since
it might get wrong value on systems with
more than 100GB of RAM
- nodeGetCPUMap - wrapper only for mapping function, currently not
supported by FreeBSD
- nodeSet/GetMemoryParameters - wrapper only for future improvements,
currently not supported by FreeBSD
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Addition of the hostbridge device was mistakenly placed to
bhyveBuildNetArgStr(). This could result in hostbridge device not being
added to the commandline if there are no network devices specified, but
hostbridge device should be added unconditionally.
Fix by placing it to virBhyveProcessBuildBhyveCmd().
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
