This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
The change 18c2a59206 caused
some regressions in behaviour of virDomainBlockStats
and virDomainBlockInfo in the QEMU driver.
The virDomainBlockInfo API stopped working for inactive
guests if querying a block device.
The virDomainBlockStats API did not promptly report
an error if the guest was not running in some cases.
* src/qemu/qemu_driver.c: Fix inactive guest handling
in BlockStats/Info APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h: APIs for
inserting/finding/removing virDomainLeaseDefPtr instances
* src/qemu/qemu_driver.c: Wire up hotplug/unplug for leases
* src/qemu/qemu_hotplug.h, src/qemu/qemu_hotplug.c: Support
for hotplug and unplug of leases
Some lock managers associate state with leases, allowing a process
to temporarily release its leases, and re-acquire them later, safe
in the knowledge that no other process has acquired + released the
leases in between.
This is already used between suspend/resume operations, and must
also be used across migration. This passes the lockstate in the
migration cookie. If the lock manager uses lockstate, then it
becomes compulsory to use the migration v3 protocol to get the
cookie support.
* src/qemu/qemu_driver.c: Validate that migration v2 protocol is
not used if lock manager needs state transfer
* src/qemu/qemu_migration.c: Transfer lock state in migration
cookie XML
The QEMU integrates with the lock manager instructure in a number
of key places
* During startup, a lock is acquired in between the fork & exec
* During startup, the libvirtd process acquires a lock before
setting file labelling
* During shutdown, the libvirtd process acquires a lock
before restoring file labelling
* During hotplug, unplug & media change the libvirtd process
holds a lock while setting/restoring labels
The main content lock is only ever held by the QEMU child process,
or libvirtd during VM shutdown. The rest of the operations only
require libvirtd to hold the metadata locks, relying on the active
QEMU still holding the content lock.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
src/qemu/libvirtd_qemu.aug, src/qemu/test_libvirtd_qemu.aug:
Add config parameter for configuring lock managers
* src/qemu/qemu_driver.c: Add calls to the lock manager
* src/qemu/qemu_driver.c (qemuGetSchedulerParameters): Move
guts...
(qemuGetSchedulerParametersFlags): ...to new callback, and honor
flags more accurately.
This patch allows to modify interfaces of domain(qemu)
* src/conf/domain_conf.c src/conf/domain_conf.h src/libvirt_private.syms:
(virDomainNetInsert) : Insert a network device to domain definition.
(virDomainNetIndexByMac) : Returns an index of net device in array.
(virDomainNetRemoveByMac): Remove a NIC of passed MAC address.
* src/qemu/qemu_driver.c
(qemuDomainAttachDeviceConfig): add codes for NIC.
(qemuDomainDetachDeviceConfig): add codes for NIC.
Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.
* src/qemu/qemu_migration.c: add some additional job signal
flags for doing blkstat/blkinfo during a migration
* src/qemu/qemu_domain.c: add a condition variable that can be
used to efficiently wait for the migration code to clear the
signal flag
* src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
job signal flags during migration
When modifying the disk devices of a live domain and the domain
configuration, the function qemuDomainAttachDeviceConfig
first sets dev->data->disk to NULL. Later qemuDomainAttachDeviceLive
accesses dev->data.disk and causes a segfault.
* src/qemu/qemu_driver.c: fix qemuDomainModifyDeviceFlags() accordingly
The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.
Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
Update for API change
When doing migration, if an error occurs in Perform, it must not
be overwritten during Finish/Confirm steps. If an error occurs
in Finish, it must not be overwritten in Confirm.
Previous commit a9d12c2444 added
code to qemudDomainMigrateFinish2 to preserve the error. This
is not the right place, because it is not applicable in non-p2p
migration. The src/libvirt.c virDomainMigrateV2/3 methods need
code to preserve errors for non-p2p migration, while the
doPeer2PeerMigrate2 and doPeer2PeerMigrate3 methods contain
code to preverse errors for p2p migration.
Remove the bogus error preservation from qemudDomainMigrateFinish2
and qemudDomainMigrateFinish3.
Fix virDomainMigrateV3 and doPeer2PeerMigrate3 so that they
preserve any error hit during the Finish3 step, before invoking
Confirm3.
Finally if qemuMigrationFinish fails to resume the CPUs, it must
preserve the error before tearing down the VM, so that VM cleanup
doesn't overwrite it.
* src/libvirt.c: Preserve error before invoking Confirm3
* src/qemu/qemu_driver.c: Remove bogus error preservation
code in qemudDomainMigrateFinish2/qemudDomainMigrateFinish3
* src/qemu/qemu_migration.c: Preserve error before invoking Confirm3
and after resume fails in qemuMigrationFinish.
Even when failing to start CPUs, the finish method was returning
a success result. Fix this so that the QEMU process is killed
off when finish fails under v3 protocol. Also rename the
killOnFinish boolean to 'v3proto' to make it clearer that this
is a tunable based on the migration protocol version
* src/qemu/qemu_driver.c: Update for API change
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Kill
VM in qemuMigrationFinish if failing to start CPUs
The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either
- A QEMU migration URI (normal migration)
- A libvirtd connection URI (peer2peer migration)
Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.
This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.
NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs: Add
the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Update to handle URIs correctly
This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.
If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.
The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.
NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs:
Add 'remote_string xmlin' parameter to begin3/perform3
RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Pass xmlin parameter around
migration methods
Saving domain to previously created file changes also its ownership.
This is certainly not what users want if some conditions are met:
it is a regular, local file and dynamic_ownership is off.
The qemuMigrationConfirm method shouldn't deal with final VM
cleanup, since it can be called from the peer2peer migration,
which expects to still use the 'vm' object afterwards.
Push the cleanup code out of qemuMigrationConfirm, into its
caller, qemuDomainMigrateConfirm3
* src/qemu/qemu_driver.c: Add VM cleanup code to
qemuDomainMigrateConfirm3
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Remove
job handling cleanup from qemuMigrationConfirm
Otherwise qemu is unable to write to it, with the error:
libvir: QEMU error : internal error unable to execute QEMU command 'memsave': Could not open '/var/cache/libvirt/qemu/qemu.mem.RRNvLv'
The v2 migration protocol had a limit on cookie length that was
too small to be useful for QEMU. Avoid generating cookies with
v2 protocol, so that old libvirtd can still reliably migrate a
guest to new libvirtd uses v2 protocol.
* src/qemu/qemu_driver.c: Avoid migration cookies with v2
migration
Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.
Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Implement the v3 migration protocol, which has two extra
steps, 'begin' on the source host and 'confirm' on the
source host. All other methods also gain both input and
output cookies to allow bi-directional data passing at
all stages.
The QEMU peer2peer migration method gains another impl
to provide the v3 migration. This finally allows migration
cookies to work with tunnelled migration, which is required
for Spice seamless migration & the lock manager transfer
* src/qemu/qemu_driver.c: Wire up migrate v3 APIs
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
begin & confirm methods, and peer2peer impl of v3
The migration protocol has support for a 'cookie' parameter which
is an opaque array of bytes as far as libvirt is concerned. Drivers
may use this for passing around arbitrary extra data they might
need during migration. The QEMU driver needs to do a few things:
- Pass hostname/uuid to allow strict protection against localhost
migration attempts
- Pass SPICE/VNC server port from the target back to the source to
allow seamless relocation of client sessions
- Pass lock driver state from source to destination
This patch introduces the basic glue for handling cookies
but only includes the host/guest UUID & name.
* src/libvirt_private.syms: Export virXMLParseStrHelper
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing
and formatting of migration cookies
* src/qemu/qemu_driver.c: Pass in cookie parameters where possible
* src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change
cookie max length to 16384 bytes
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:
qemudDomainResume, /* domainResume */
qemudDomainShutdown, /* domainShutdown */
NULL, /* domainReboot */
qemudDomainDestroy, /* domainDestroy */
to
.domainResume = qemudDomainResume,
.domainShutdown = qemudDomainShutdown,
.domainDestroy = qemudDomainDestroy,
And get rid of any existing C99 style initializersr which
set NULL, eg change
.listPools = vboxStorageListPools,
.numOfDefinedPools = NULL,
.listDefinedPools = NULL,
.findPoolSources = NULL,
.poolLookupByName = vboxStoragePoolLookupByName,
to
.listPools = vboxStorageListPools,
.poolLookupByName = vboxStoragePoolLookupByName,
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
Only in drivers which use virDomainObj, drivers that query hypervisor
for domain status need to be updated separately in case their hypervisor
supports this functionality.
The reason is also saved into domain state XML so if a domain is not
running (i.e., no state XML exists) the reason will be lost by libvirtd
restart. I think this is an acceptable limitation.
This is needed if we want to transfer a temporary file. If the
transfer is done with iohelper, we might run into a race condition,
where we unlink() file before iohelper is executed.
* src/fdstream.c, src/fdstream.h,
src/util/iohelper.c: Add new option
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/storage/storage_driver.c, src/uml/uml_driver.c,
src/xen/xen_driver.c: Expand existing function calls
We were 31/73 on whether to translate; since less than 50% translated
and since VIR_INFO is less than VIR_WARN which also doesn't translate,
this makes sense.
* cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it
falls between WARN and DEBUG.
* daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess)
(qemudDispatchServer): Adjust offenders.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/network/bridge_driver.c (networkReloadIptablesRules)
(networkStartNetworkDaemon, networkShutdownNetworkDaemon)
(networkCreate, networkDefine, networkUndefine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainDefine)
(qemudDomainUndefine): Likewise.
* src/storage/storage_driver.c (storagePoolCreate)
(storagePoolDefine, storagePoolUndefine, storagePoolStart)
(storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML)
(storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise.
* src/util/bridge.c (brProbeVnetHdr): Likewise.
* po/POTFILES.in: Drop src/util/bridge.c.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce a virProcessKill function that can be safely called
even when the job mutex is held. This allows virDomainDestroy
to kill any VM even if it is asleep in a monitor job. The PID
will die and the thread asleep on the monitor will then wake
up releasing the job mutex.
* src/qemu/qemu_driver.c: Kill process before using qemuProcessStop
to ensure job is released
* src/qemu/qemu_process.c: Add virProcessKill for killing off
QEMU processes
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
As well as taint warnings going to the main libvirt log,
add taint warnings to the per-domain logfile
Domain id=3 is tainted: high-privileges
Domain id=3 is tainted: disk-probing
Domain id=3 is tainted: shell-scripts
Domain id=3 is tainted: custom-monitor
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Enhance
qemuDomainTaint to also log to the domain logfile
* src/qemu/qemu_driver.c: Pass -1 for logFD to taint methods to
auto-append to logfile
* src/qemu/qemu_process.c: Pass open logFD at startup for taint
methods
Wire up logging of VM tainting to the QEMU driver
- If running QEMU as root user/group or without capabilities
being cleared
- If passing custom QEMU command line args
- If issuing custom QEMU monitor commands
- If using a network interface config with an associated
shell script
- If using a disk config relying on format probing
The warnings, per-VM appear in the main libvirtd logs
11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: high-privileges
11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: disk-probing
The taint flags are reset when the VM is stopped.
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Helper APIs
for logging taint warnings
* src/qemu/qemu_driver.c: Log tainting with custom QEMU monitor
commands and disk/net hotplug with unsupported configs
* src/qemu/qemu_process.c: Log tainting at startup based on
unsupported configs
Clang 2.8 wasn't quite able to follow that persistentDef was
assigned earlier if (flags & VIR_DOMAIN_MEM_CONFIG) is true.
Silence this false positive, to make clang analysis easier to use.
* src/qemu/qemu_driver.c (qemudDomainSetMemoryFlags): Add an
annotation to silence clang's claim of a NULL dereference.
This code has had problems historically. As originally
written, in commit 6bcf2501 (Jun 08), it could call unlink
on a random string, nuking an unrelated file.
Then commit 182a80b9 (Sep 09), the code was rewritten to
allocate tmp, with both a use-after-free bug and a chance to
call unlink(NULL).
Commit e206946 (Mar 11) fixed the use-after-free, but not the
NULL dereference. Thanks to clang for catching this!
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Don't call
unlink on NULL.
This commit fixes
qemu/qemu_driver.c: In function 'qemuDomainModifyDeviceFlags':
qemu/qemu_driver.c:4041:8: warning: 'ret' may be used uninitialized in this
function [-Wuninitialized]
qemu/qemu_driver.c:4013:9: note: 'ret' was declared here
The variable is set to -1 so that the error paths are taken when the code
to set it didn't get a chance to run. Without initializing it, we could
return some an undefined value from this function.
While I was at it, I made a trivial whitespace change in the same function
to improve readability.
Support update of disks by MODIFY_CONFIG
This patch includes changes for qemu's disk to support
virDomainUpdateDeviceFlags() with VIR_DOMAIN_DEVICE_MODIFY_CONFIG.
This patch adds support for CDROM/foppy disk types.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
* src/qemu/qemu_driver.c
(qemuDomainUpdateDeviceConfig): support cdrom/floppy.
Support changes of disks by MODIFY_CONFIG for qemu.
This patch includes patches for qemu's disk to support
virDomainAt(De)tachDeviceFlags with VIR_DOMAIN_DEVICE_MODIFY_CONFIG.
Other devices can be added incrementally.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
* /src/conf/domain_conf.c
(virDomainDiskIndexByName): returns array index of disk in vmdef.
(virDomainDiskRemoveByName): removes a disk which has the name in vmdef.
* src/qemu/qemu_driver.c
(qemuDomainAttachDeviceConfig): add support for Disks.
(qemuDomainDetachDeviceConfig): add support for Disks.
This patch adds functions for modify domain's persistent definition.
To do error recovery in easy way, we use a copy of vmdef and update it.
The whole sequence will be:
make a copy of domain definition.
if (flags & MODIFY_CONFIG)
update copied domain definition
if (flags & MODIF_LIVE)
do hotplug.
if (no error)
save copied one to the file and update cached definition.
else
discard copied definition.
This patch is mixuture of Eric Blake's work and mine.
From: Eric Blake <eblake@redhat.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
(virDomainObjCopyPersistentDef): make a copy of persistent vm definition
(qemuDomainAttach/Detach/UpdateDeviceConfig) : callbacks. now empty
(qemuDomainModifyDeviceFlags): add support for MODIFY_CONFIG and MODIFY_CURRENT
This patch strips reusable part of qemuDomainUpdateDeviceFlags()
and consolidate it to qemuDomainModifyDeviceFlags().
No functional changes.
* src/qemu/qemu_driver.c
(qemuDomainChangeDiskMediaLive) : pulled out code for updating disks.
(qemuDomainUpdateDeviceLive) : core of UpdateDevice, extracted from
UpdateDeviceFlags()
(qemuDomainModifyDeviceFlags): add support for updating device in live domain.
(qemuDomainUpdateDeviceFlags): reworked as a wrapper function of
qemuDomainModifyDeviceFlags()
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
clean up At(De)tachDeviceFlags() for consolidation.
qemuDomainAttachDeviceFlags()/qemuDomainDetachFlags()/
qemuDomainUpdateDeviceFlags() has similar logics and copied codes.
This patch series tries to unify them to use shared code when it can.
At first, clean up At(De)tachDeviceFlags() and devide it into functions.
By this, this patch pulls out shared components between functions.
Based on patch series by Eric Blake, I added some modification as
switch-case with QEMU_DEVICE_ATTACH, QEMU_DEVICE_DETACH, QEMU_DEVICE_UPDATE
* src/qemu/qemu_driver.c
(qemuDomainAt(De)tachDeviceFlags) : pulled out to qemuDomainModifyDeviceFlags()
(qemuDomainModifyDeviceFlags) : implements generic code for modifying domain.
(qemuDomainAt(De)tachDeviceFlagsLive) : code for at(de)taching devices to
domain in line. no changes in logic from old code.
(qemuDomainAt(De)tachDeviceDiskLive) : for at(de)taching Disks.
(qemuDomainAt(De)tachDeviceControllerLive) : for at(de)taching Controllers
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Centralize device modification in the more flexible APIs, to allow future
honoring of additional flags. Explicitly reject the
VIR_DOMAIN_DEVICE_MODIFY_FORCE flag on attach/detach.
Based on Eric Blake<eblake@redhat.com>'s work.
* src/qemu/qemu_driver.c
(qemudDomainAttachDevice)(qemudDomainAttachDeviceFlags): Swap bodies,rename...
(qemudDomainDetachDevice, qemudDomainDetachDeviceFlags): Likewise.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch does the following two things:
1. hold an extra reference while handling watchdog event
If the domain is not persistent, and qemu quits unexpectedly before
calling processWatchdogEvent(), vm will be freed and the function
processWatchdogEvent() will be dangerous.
2. unlock qemu driver and vm before returning from processWatchdogEvent()
When the function processWatchdogEvent() failed, we only free wdEvent,
but forget to unlock qemu driver and vm, free dumpfile.
We do not lock qemu_driver when calling virThreadPoolNew(). If it failed,
we will unlock qemu_driver. It is dangerous.
We may use this pool during auto starting domains. So we must create it before
calling qemuAutostartDomains(). Otherwise, libvirtd will crash.
This patch enables the migration of Qemu VMs between hosts of different endianess. I tested this by migrating a i686 VM between a x86 and ppc64 host.
I am converting the 'int's in the VM's state header to uint32_t assuming this doesn't break compatibility with existing deployments other than Linux.
The methods qemuDomain{Get,Set}{Memory,Blkio,Scheduler}Parameters
all forgot to do a check on virDomainIsActive(), resulting in bogus
error messages from later parts of their impl
* src/qemu/qemu_driver.c: Add missing checks on virDomainIsActive()
This patch implements the code to support virDomainSetMaxMemory API,
and to support VIR_DOMAIN_MEM_MAXIMUM flag in qemudDomainSetMemoryFlags function.
As a result, we can change the maximum memory size of inactive QEMU guests.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch adds virDomainSetMemoryFlags(,,VIR_DOMAIN_MEM_CURRENT) support
code to qemu driver.
Also, change virDomainObjIsActive to return bool, given its usage.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").
The fix for is to unlink the managed state file only if restoring
succeeded.
2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.
3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:
{
if (cond)
goto error;
int a = 1;
error:
printf("%d", a);
}
which prints 0 (supposing the stack started life wiped) if
cond was true. Clang will catch it, but we don't use clang
as often. Using gcc -Wjump-misses-init catches it, but also
gives false positives:
{
if (cond)
goto error;
int a = 1;
return a;
error:
return 0;
}
Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.
[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]
* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
We create a temporary file to save memory, and we will remove it after reading
memory to buffer. But we free the variable that contains the temporary filename
before we remove it. So we should free tmp after unlinking it.
Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.) This patch helps to do that
by making additional logging available for the following events:
creating/defining/undefining domains
creating/defining/undefining/starting/stopping networks
creating/defining/undefining/starting/stopping storage pools
creating/defining/undefining/starting/stopping storage volumes.
* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
src/storage/storage_driver.c: provide more VIR_INFO logging
When domain startup, setting cpu affinity and cpu shares according
to the cputune xml specified in domain xml.
Modify "qemudDomainPinVcpu" to update domain config for vcpupin,
and modify "qemuSetSchedulerParameters" to update domain config
for cpu shares.
v1 - v2:
* Use "VIR_ALLOC_N" instead of "VIR_ALLOC_VAR"
* But keep raising error when it fails on adding vcpupin xml
entry, as I still don't have a better idea yet.
The O_NONBLOCK flag doesn't work as desired on plain files
or block devices. Introduce an I/O helper program that does
the blocking I/O operations, communicating over a pipe that
can support O_NONBLOCK
* src/fdstream.c, src/fdstream.h: Add non-blocking I/O
on plain files/block devices
* src/Makefile.am, src/util/iohelper.c: I/O helper program
* src/qemu/qemu_driver.c, src/lxc/lxc_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Update for
streams API change
This points out that core dumps (still) don't work for root-squash
NFS, since the fd is not opened correctly. This patch should not
introduce any functionality change, it is just a refactoring to
avoid duplicated code.
* src/qemu/qemu_migration.h (qemuMigrationToFile): New prototype.
* src/qemu/qemu_migration.c (qemuMigrationToFile): New function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag, doCoreDump): Use
it.
Direct access to an open file is so much simpler than passing
everything through a pipe!
* src/qemu/qemu_driver.c (qemudOpenAsUID)
(qemudDomainSaveImageClose): Delete.
(qemudDomainSaveImageOpen): Rename...
(qemuDomainSaveImageOpen): ...and drop read_pid argument. Use
virFileOpenAs instead of qemudOpenAsUID.
(qemudDomainSaveImageStartVM, qemudDomainRestore)
(qemudDomainObjRestore): Rename...
(qemuDomainSaveImageStartVM, qemuDomainRestore)
(qemDomainObjRestore): ...and simplify accordingly.
(qemudDomainObjStart, qemuDriver): Update callers.
This patch intentionally doesn't change indentation, in order to
make it easier to review the real changes.
* src/util/util.h (VIR_FILE_OP_RETURN_FD, virFileOperationHook):
Delete.
(virFileOperation): Rename...
(virFileOpenAs): ...and reduce parameters.
* src/util/util.c (virFileOperationNoFork, virFileOperation):
Rename and simplify.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust caller.
* src/storage/storage_backend.c (virStorageBackendCreateRaw):
Likewise.
* src/libvirt_private.syms: Reflect rename.
This allows direct saves (no compression, no root-squash NFS) to use
the more efficient fd: migration, which in turn avoids a race where
qemu exec: migration can sometimes fail because qemu does a generic
waitpid() that conflicts with the pclose() used by exec:. Further
patches will solve compression and root-squash NFS.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Use new function
when there is no compression.
Otherwise, if something like doStopVcpus fails after the first
restore, a second restore is attempted and throws a useless
warning.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Avoid second
restore of state label.
Add missing open curly brace between function declaration of non-linux
variant of qemudDomainInterfaceStats() and its body.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Steps to reproduce this bug:
1. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver qcow2
error: Failed to attach disk
error: operation failed: adding scsi-disk,bus=scsi0.0,scsi-id=1,drive=drive-scsi0-0-1,id=scsi0-0-1 device failed: Property 'scsi-disk.drive' can't find value 'drive-scsi0-0-1'
2. service libvirtd restart
Stopping libvirtd daemon: [ OK ]
Starting libvirtd daemon: [ OK ]
3. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver raw
error: Failed to attach disk
error: operation failed: adding lsi,id=scsi0,bus=pci.0,addr=0x6 device failed: Duplicate ID 'scsi0' for device
The reason is that we create a new scsi controller but we do not update
/var/run/libvirt/qemu/domain.xml.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Enhance the QEMU migration monitoring loop, so that it can get
a signal to change migration speed on the fly
* src/qemu/qemu_domain.h: Add signal for changing speed on the fly
* src/qemu/qemu_driver.c: Wire up virDomainMigrateSetSpeed driver
* src/qemu/qemu_migration.c: Support signal for changing speed
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
THREADS.txt states that the contents of vm should not be read or
modified while the vm lock is not held, but that the lock must not
be held while performing a monitor command. This fixes all the
offenders that I could find.
* src/qemu/qemu_process.c (qemuProcessStartCPUs)
(qemuProcessInitPasswords, qemuProcessStart): Don't modify or
refer to vm state outside lock.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeGraphicsPasswords):
Likewise.
This bug was reported by Shi Jin(jinzishuai@gmail.com):
=============
# virsh attach-disk RHEL6RC /var/lib/libvirt/images/test3.img vdb \
--driver file --subdriver qcow2
Disk attached successfully
# virsh save RHEL6RC /var/lib/libvirt/images/memory.save
Domain RHEL6RC saved to /var/lib/libvirt/images/memory.save
# virsh restore /var/lib/libvirt/images/memory.save
error: Failed to restore domain from /var/lib/libvirt/images/memory.save
error: internal error unsupported driver name 'file'
for disk '/var/lib/libvirt/images/test3.img'
=============
We check the driver name when we start or restore VM, but we do
not check it while attaching a disk. This adds the same check on disk
driverName used in qemuBuildCommandLine to qemudDomainAttachDevice.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
* Correct the documentation for cgroup: the swap_hard_limit indicates
mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Adding audit points showed that we were granting too much privilege
to qemu; it should not need any mknod rights to recreate any
devices. On the other hand, lxc should have all device privileges.
The solution is adding a flag parameter.
This also lets us restrict write access to read-only disks.
* src/util/cgroup.h (virCgroup*Device*): Adjust prototypes.
* src/util/cgroup.c (virCgroupAllowDevice)
(virCgroupAllowDeviceMajor, virCgroupAllowDevicePath)
(virCgroupDenyDevice, virCgroupDenyDeviceMajor)
(virCgroupDenyDevicePath): Add parameter.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update clients.
* src/lxc/lxc_controller.c (lxcSetContainerResources): Likewise.
* src/qemu/qemu_cgroup.c: Likewise.
(qemuSetupDiskPathAllow): Also, honor read-only disks.
Device names can be manipulated, so it is better to also log
the major/minor device number corresponding to the cgroup ACL
changes that libvirt made. This required some refactoring
of the relatively new qemu cgroup audit code.
Also, qemuSetupChardevCgroup was only auditing on failure, not success.
* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): Delete.
(qemuAuditCgroup, qemuAuditCgroupMajor, qemuAuditCgroupPath): New
prototypes.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Rename...
(qemuAuditCgroup): ...and drop a parameter.
(qemuAuditCgroupMajor, qemuAuditCgroupPath): New functions, to
allow listing device major/minor in audit.
(qemuAuditGetRdev): New helper function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust callers.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupHostUsbDeviceCgroup, qemuSetupCgroup)
(qemuTeardownDiskPathDeny): Likewise.
(qemuSetupChardevCgroup): Likewise, fixing missing audit.
virRun gives pretty useful error output, let's not overwrite it unless there
is a good reason. Some places were providing more information about what
the commands were _attempting_ to do, however that's usually less useful from
a debugging POV than what actually happened.
The way to detach a USB disk is the same as that to detach a SCSI
disk. Rename this function and we can use it to detach a USB disk.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
qemudDomainSaveImageStartVM was evil - it closed the incoming fd
argument on some, but not all, code paths, without informing the
caller about that action. No wonder that this resulted in
double-closes: https://bugzilla.redhat.com/show_bug.cgi?id=672725
* src/qemu/qemu_driver.c (qemudDomainSaveImageStartVM): Alter
signature, to avoid double-close.
(qemudDomainRestore, qemudDomainObjRestore): Update callers.
Relax the restriction that the hash table key must be a string
by allowing an arbitrary hash code generator + comparison func
to be provided
* util/hash.c, util/hash.h: Allow any pointer as a key
* internal.h: Include stdbool.h as standard.
* conf/domain_conf.c, conf/domain_conf.c,
conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c,
nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c,
qemu/qemu_command.c, qemu/qemu_driver.c,
qemu/qemu_process.c, uml/uml_driver.c,
xen/xm_internal.c: s/char */void */ in hash callbacks
This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
enum values have to fit into int
The introduction of the v3 migration protocol, along with
support for migration cookies, will significantly expand
the size of the migration code. Move it all to a separate
file to make it more manageable
The functions are not moved 100%. The API entry points
remain in the main QEMU driver, but once the public
virDomainPtr is resolved to the internal virDomainObjPtr,
all following code is moved.
This will allow the new v3 API entry points to call into the
same shared internal migration functions
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
qemuDomainFormatXML helper method
* src/qemu/qemu_driver.c: Remove all migration code
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
all migration code.
Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match
* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
all QEMU process startup/shutdown functions
"qemudDomainSaveFlag" goto wrong label "endjob", which will cause
error when security manager trying to restore label (regression).
As it's more reasonable to check if vm is shutoff immediately, and
return right away if it is, remove the checking in "qemudDomainSaveFlag",
and add checking in "qemudDomainSave".
* src/qemu/qemu_driver.c
The processWatchdogEvent fix is real, although it can only trigger
on OOM, since bad things happen if doCoreDump is called with a NULL
pathname argument. The other fixes silence clang, but aren't a real
bug because virReportErrorHelper tolerates a NULL format string even
though *printf does not.
* src/qemu/qemu_driver.c (processWatchdogEvent): Exit on OOM.
(qemuDomainIsActive, qemuDomainIsPersistent, qemuDomainIsUpdated):
Provide valid message.
Commit 9962e406c6 introduced a
problem where if the VM failed to startup, it would not be
correctly cleaned up. Amongst other things the SELinux
security label would not be removed, which prevents the VM
from ever starting again.
The virDomainIsActive() check at the start of qemudShutdownVMDaemon
checks for vm->def->id not being -1. By moving the assignment of the
VM id to the start of qemudStartVMDaemon, we can ensure cleanup will
occur on failure
* src/qemu/qemu_driver.c: Move initialization of 'vm->def->id'
so that qemudShutdownVMDaemon() will process the shutdown
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()
The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.
So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.
tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()
set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Quite a few hosts don't have cgroups mounted and so see warnings
from libvirt logged, which then cause bug reports, etc. Reduce
the log level to INFO so they're not visible by default
* src/qemu/qemu_driver.c: Reduce log level for cgroups
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
* src/qemu/qemu_driver.c (qemudShutdownVMDaemon): Check that vm is
still active.
Reported by Wen Congyang as follows:
Steps to reproduce this bug:
1. use gdb to debug libvirtd, and set breakpoint in the function
qemuConnectMonitor()
2. start a vm, and the libvirtd will be stopped in qemuConnectMonitor()
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. continue to run libvirtd in gdb, and libvirtd will be blocked in the
function qemuMonitorSetCapabilities()
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Here is log of the qemu:
=========
LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin ...
char device redirected to /dev/pts/3
2011-01-27 09:38:48.101: shutting down
2011-01-27 09:41:26.401: shutting down
=========
The vm is shut down twice. I do not know whether this behavior has
side effect, but I think we should shutdown the vm only once.
The refactoring of QEMU command startup was comitted with
a couple of VIR_WARN lines left in from debugging.
* src/qemu/qemu_driver.c: Remove log warning lines
When qemuMonitorSetCapabilities() fails, there is no need to
call qemuMonitorClose(), because the caller will already see
the error code and tear down the entire VM. The extra call to
qemuMonitorClose resulted in a double-free due to it removing
a ref count prematurely.
* src/qemu/qemu_driver.c: Remove premature close of monitor
Regression in commit caa805ea let a lot of bad messages slip in.
* cfg.mk (msg_gen_function): Fix function name.
* src/qemu/qemu_cgroup.c (qemuRemoveCgroup): Fix fallout from
'make syntax-check'.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainWaitForMigrationComplete, qemudStartVMDaemon)
(qemudDomainSaveFlag, qemudDomainAttachDevice)
(qemuDomainUpdateDeviceFlags): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostUsbDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachSCSIDiskDevice):
Likewise.
Steps to reproduce this bug:
1. service libvirtd start
2. virsh start <domain>
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. service libvirtd restart
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Then libvirtd will core dump or be in deadlock state.
Make sure that json is built into libvirt and the version
of qemu is newer than 0.13.0.
The reason of libvirtd cores dump is that:
We add vm->refs when we alloc the memory, and decrease it
in the function qemuHandleMonitorEOF() in other thread.
We add vm->refs in the function qemuConnectMonitor() and
decrease it when the vm is inactive.
The libvirtd will block in the function qemuMonitorSetCapabilities()
because the vm is stopped by signal SIGSTOP. Now the vm->refs is 2.
Then we kill the vm by signal SIGKILL. The function
qemuMonitorSetCapabilities() failed, and then we will decrease vm->refs
in the function qemuMonitorClose().
In another thread, mon->fd is broken and the function
qemuHandleMonitorEOF() is called.
If qemuHandleMonitorEOF() decreases vm->refs before qemuConnectMonitor()
returns, vm->refs will be decrease to 0 and the memory is freed.
We will call qemudShutdownVMDaemon() as qemuConnectMonitor() failed.
The memory has been freed, so qemudShutdownVMDaemon() is too dangerous.
We will reference NULL pointer in the function virDomainConfVMNWFilterTeardown():
=============
void
virDomainConfVMNWFilterTeardown(virDomainObjPtr vm) {
int i;
if (nwfilterDriver != NULL) {
for (i = 0; i < vm->def->nnets; i++)
virDomainConfNWFilterTeardown(vm->def->nets[i]);
}
}
============
vm->def->nnets is not 0 but vm->def->nets is NULL(We don't set vm->def->nnets
to 0 when we free vm).
We should add an extra reference of vm to avoid vm to be deleted if
qemuConnectMonitor() failed.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
If a guest image is saved in compressed format, and the restore fails
in some way after the intermediate process used to uncompress the
image has been started, but before qemu has been started to hook up to
the uncompressor, libvirt will endlessly wait for the uncompressor to
finish, but it never will because it's still waiting to have something
hooked up to drain its output.
The solution is to close the pipes on both sides of the uncompressor,
then send a SIGTERM before calling waitpid on it (only if the restore
has failed, of course).
This patch is a partial resolution to the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=667756
(to complete the fix, an updated selinux-policy package is required,
to add the policy that allows libvirt to set the context of a fifo,
which was previously not allowed).
Explanation : When an incoming migration is over a pipe (for example,
if the image was compressed and is being fed through gzip, or was on a
root-squash nfs server, so needed to be opened by a child process
running as a different uid), qemu cannot read it unless the selinux
context label for the pipe has been set properly.
The solution is to check the fd used as the source of the migration
just before passing it to qemu; if it's a fifo (implying that it's a
pipe), we call the newly added virSecurityManagerSetFDLabel() function
to set the context properly.
The problem was introduced by commit 4303c91, which removed the checking
of domain state, this patch is to fix it.
Otherwise, improper error will be thrown, e.g.
error: Failed to save domain rhel6 state
error: cannot resolve symlink /var/lib/libvirt/qemu/save/rhel6.save: No such
file or directory
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
This will allow us to record transient runtime state in vm->def, like
default VNC parameters. Accomplish this by adding an extra 'live' parameter
to SetDefTransient, with similar semantics to the 'live' flag for
AssignDef.
Avoid overwriting the real error message with a generic
OOM failure message, when machine type probe fails
* src/qemu/qemu_driver.c: Don't overwrite error
The function virUnrefConnect() may call virReleaseConnect() to release
the dest connection, and the function virReleaseConnect() will call
conn->driver->close().
So the function virUnrefConnect() should be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
In some circumstances, libvirtd would issue two STOPPED events after it
stopped a domain. This was because an EOF event can arrive after a qemu
process is killed but before qemuMonitorClose() is called.
qemuHandleMonitorEOF() should ignore EOF when the domain is not running.
I wasn't able to reproduce this bug directly, only after adding an
artificial sleep() into qemudShutdownVMDaemon().
https://bugzilla.redhat.com/show_bug.cgi?id=620363
When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete. Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.
The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible. Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
We try to use that command first when setting a VNC/SPICE password. If
that doesn't work we fallback to the legacy VNC only password
Allow an expiry time to be set, if that doesn't work, throw an error
if they try to use SPICE.
Change since v1:
- moved qemuInitGraphicsPasswords to qemu_hotplug, renamed
to qemuDomainChangeGraphicsPasswords.
- updated what looks like a typo (that appears to work anyway) in
initial patch from Daniel:
- ret = qemuInitGraphicsPasswords(driver, vm,
- VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
- &vm->def->graphics[0]->data.vnc.auth,
- driver->vncPassword);
+ ret = qemuInitGraphicsPasswords(driver, vm,
+ VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
+ &vm->def->graphics[0]->data.spice.auth,
+ driver->spicePassword);
Based on patch by Daniel P. Berrange <berrange@redhat.com>.
The current security driver usage requires horrible code like
if (driver->securityDriver &&
driver->securityDriver->domainSetSecurityHostdevLabel &&
driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply
if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.
The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.
* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h
src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
src/security/security_dac.c, src/security/security_dac.h: Generic
versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
src/security/security_driver.c, src/security/security_driver.h,
src/security/security_selinux.c, src/security/security_selinux.h:
Update to take virSecurityManagerPtr object as the first param
in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs
While doing some testing with Qemu and creating huge logfiles I encountered the case where the VM could not start anymore due to the lseek() to the end of the Qemu VM's log file failing. The patch below fixes the problem by replacing the previously used 'int' with 'off_t'.
To reproduce this error, you could do the following:
dd if=/dev/zero of=/var/log/libvirt/qemu/<name of VM>.log bs=1024 count=$((1024*2048))
and you should get an error like this:
error: Failed to start domain <name of VM>
error: Unable to seek to -2147482651 in /var/log/libvirt/qemu/<name of VM>.log: Success
This patch fixes https://bugzilla.redhat.com/show_bug.cgi?id=664406
If qemu is run as a different uid, it has been unable to access mode
0660 files that are owned by a different user, but with a group that
the qemu is a member of (aside from the one group listed in the passwd
file), because initgroups() is not being called prior to the
exec. initgroups will change the group membership of the process (and
its children) to match the new uid.
To make this happen, the setregid()/setreuid() code in
qemuSecurityDACSetProcessLabel has been replaced with a call to
virSetUIDGID(), which does both of those, plus calls initgroups.
Similar, but not identical, code in qemudOpenAsUID() has been replaced
with virSetUIDGID(). This not only consolidates the functionality to a
single location, but also potentially fixes some as-yet unreported
bugs.
Shorten qemuDomainSnapshotWriteSnapshotMetadata function name
and make it take a snapshot pointer instead of dealing with
the current snapshot. Update other functions accordingly.
Add a qemuDomainSnapshotReparentChildren hash iterator to
reparent the children of a snapshot that is being deleted. Use
qemuDomainSnapshotWriteMetadata to write updated metadata
to disk.
This fixes a problem where outdated parent information breaks
the snapshot tree and hinders the deletion of child snapshots.
Reported by Philipp Hahn.
The QEMU driver file is far too large. Move all the hotplug
helper code out into a separate file. No functional change.
* src/qemu/qemu_hotplug.c, src/qemu/qemu_hotplug.h,
src/Makefile.am: Add hotplug helper file
* src/qemu/qemu_driver.c: Delete hotplug code
To allow the APIs to be used from separate files, move the domain
lock / job helper code into qemu_domain.c
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add domain lock
/ job code
* src/qemu/qemu_driver.c: Remove domain lock / job code
To allow their use from other source files, move qemuDriverLock
and qemuDriverUnlock to qemu_conf.h and make them non-static
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuDriverLock
qemuDriverUnlock
* src/qemu/qemu_driver.c: Remove qemuDriverLock and qemuDriverUnlock
The QEMU driver file is far too large. Move all the hostdev
helper code out into a separate file. No functional change.
* src/qemu/qemu_hostdev.c, src/qemu/qemu_hostdev.h,
src/Makefile.am: Add hostdev helper file
* src/qemu/qemu_driver.c: Delete hostdev code
The QEMU driver file is far too large. Move all the cgroup
helper code out into a separate file. No functional change.
* src/qemu/qemu_cgroup.c, src/qemu/qemu_cgroup.h,
src/Makefile.am: Add cgroup helper file
* src/qemu/qemu_driver.c: Delete cgroup code
The QEMU driver file is far too large. Move all the audit
helper code out into a separate file. No functional change.
* src/qemu/qemu_audit.c, src/qemu/qemu_audit.h,
src/Makefile.am: Add audit helper file
* src/qemu/qemu_driver.c: Delete audit code
Move the code for handling the QEMU virDomainObjPtr private
data, and custom XML namespace into a separate file
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: New file
for private data & namespace code
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
private data & namespace code
* src/qemu/qemu_driver.h, src/qemu/qemu_command.h: Update
includes
* src/Makefile.am: Add src/qemu/qemu_domain.c
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the command line code into its own file
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: New
command line management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command
line code
* src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_command.c
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add
import of qemu_command.h
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the capabilities code into its own file
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: New
capabilities management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete capabilities
code
* src/qemu/qemu_conf.h: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_capabilities.c
Currently, all of domain "save/dump/managed save/migration"
use the same function "qemudDomainWaitForMigrationComplete"
to wait the job finished, but the error messages are all
about "migration", e.g. when a domain saving job is canceled
by user, "migration was cancled by client" will be throwed as
an error message, which will be confused for user.
As a solution, intoduce two new job types(QEMU_JOB_SAVE,
QEMU_JOB_DUMP), and set "priv->jobActive" to "QEMU_JOB_SAVE"
before saving, to "QEMU_JOB_DUMP" before dumping, so that we
could get the real job type in
"qemudDomainWaitForMigrationComplete", and give more clear
message further.
And as It's not important to figure out what's the exact job
is in the DEBUG and WARN log, also we don't need translated
string in logs, simply repace "migration" with "job" in some
statements.
* src/qemu/qemu_driver.c
`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)
Currently only qemu is supported.
When we get an EOF event on monitor connection, it may be a result of
either crash or graceful shutdown. QEMU which supports async events
(i.e., we are talking to it using JSON monitor) emits SHUTDOWN event on
graceful shutdown. In case we don't get this event by the time monitor
connection is closed, we assume the associated domain crashed.
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request. In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed. With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.
This patch adds support for the drive_del() command and introduces it
in the disk removal paths. If the guest is running in a QEMU without this
command we currently explicitly check for unknown command/CommandNotFound
and log the issue.
If QEMU supports the command we issue the drive_del command after we attempt
to remove the device. The guest may respond and remove the block device
before we get to attempt to call drive_del. In that case, we explicitly check
for 'Device not found' from the monitor indicating that the target drive
was auto-deleted upon guest responds to the device removal notification.
1. http://thread.gmane.org/gmane.comp.emulators.qemu/84745
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request. In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed. With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.
This patch adds support for the drive_unplug() command and introduces it
in the disk removal paths. There is some discussion to be had about how
to handle the case where the guest is running in a QEMU without this
command (and the fact that we currently don't have a way of detecting
what monitor commands are available).
Changes since v2:
- use VIR_ERROR to report when unplug command not found
Changes since v1:
- return > 0 when command isn't present, < 0 on command failure
- detect when drive_unplug command isn't present and log error
instead of failing entire command
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
- qemudDomainAttachPciControllerDevice: Don't build "devstr"
if "-device" of qemu is not available, as "devstr" will only
be used by "qemuMonitorAddDevice", which depends on "-device"
argument of qemu is supported.
- "qemudDomainSaveImageOpen": Fix indent problem.
* src/qemu/qemu_driver.c
Two more calls to remote libvirtd have to be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
* src/qemu/qemu_conf.c (qemudExtractVersionInfo): Check for file
before executing it here, rather than in callers.
(qemudBuildCommandLine): Rewrite with virCommand.
* src/qemu/qemu_conf.h (qemudBuildCommandLine): Update signature.
* src/qemu/qemu_driver.c (qemuAssignPCIAddresses)
(qemudStartVMDaemon, qemuDomainXMLToNative): Adjust callers.
* src/qemu/qemu_driver.c (though MACROS QEMU_VNC_PORT_MAX, and
QEMU_VNC_PORT_MIN are defined at the beginning, numbers (65535, 5900)
are still used, replace them)
Use macvtap specific functions depending on WITH_MACVTAP.
Use #if instead of #ifdef to check for WITH_MACVTAP, because
WITH_MACVTAP is always defined with value 0 or 1.
Also export virVMOperationType{To|From}String unconditional,
because they are used unconditional in the domain config code.
When dumping a domain, it's reasonable to save dump-file in raw format
if dump format is misconfigured or the corresponding compress program
is not available rather then fail dumping.
This patch introduces the usage of the pre-associate state of the IEEE 802.1Qbg standard on incoming VM migration on the target host. It is in response to bugzilla entry 632750.
https://bugzilla.redhat.com/show_bug.cgi?id=632750
For being able to differentiate the exact reason as to why a macvtap device is being created, either due to a VM creation or an incoming VM migration, I needed to pass that reason as a parameter from wherever qemudStartVMDaemon is being called in order to determine whether to send an ASSOCIATE (VM creation) or a PRE-ASSOCIATE (incoming VM migration) towards lldpad.
I am also fixing a problem with the virsh domainxml-to-native call on the way.
Gerhard successfully tested the patch with a recent blade network 802.1Qbg-compliant switch.
The patch should not have any side-effects on the 802.1Qbh support in libvirt, but Roopa (cc'ed) may want to verify this.
When running non-root, the QEMU log file is usually opened with
truncation, since there is no logrotate for non-root usage.
This means that when libvirt logs the shutdown timestamp, the
log is accidentally truncated
* src/qemu/qemu_driver.c: Never truncate log file with shutdown
message
Do this by adding a helper function to get the persistent domain config. This
should be useful for other functions that may eventually want to alter
the persistent domain config (attach/detach device). Also make similar changes
to the test drivers setvcpus command.
A caveat is that the function will return the running config for a transient
domain, rather than error. This simplifies callers, as long as they use
other methods to ensure the guest is persistent.
Doing 'virsh setvcpus $vm --config 10' doesn't check the value against the
domains maxvcpus value. A larger value for example will prevent the guest
from starting.
Also make a similar change to the test driver.
The current semantics of non-persistent hotplug/update are confusing: the
changes will persist as long as the in memory domain definition isn't
overwritten. This means hotplug changes stay around until the domain is
redefined or libvirtd is restarted.
Call virDomainObjSetDefTransient at VM startup, so that we properly discard
hotplug changes when the VM is shutdown.
Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().
Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()< 0 check and I converted those to
VIR_FCLOSE()< 0.
I did not find occurrences of possible double-closed files on the way.
Currently only support domain start and shutdown, for domain start,
record timestamp before the qemu command line, and for domain shutdown,
just say it's shutting down with timestamp.
* src/qemu/qemu_driver.c (qemudStartVMDaemon, qemudShutdownVMDaemon
introduced two macros - START_POSTFIX, SHUTDOWN_POSTFIX)
This provides an implementation of the virDomainOpenConsole
API with the QEMU driver. For the streams code, this reuses
most of the code previously added for the tunnelled migration
streams since it is generic.
* src/qemu/qemu_driver.c: Support virDomainOpenConsole
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.
This has been requested for RHEV:
https://bugzilla.redhat.com/show_bug.cgi?id=626305
v2: Change flag name, bool cleanups
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
This extends the XML syntax for <graphics> to allow a password
expiry time to be set
eg
<graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>
The timestamp is in UTC.
* src/conf/domain_conf.h: Pull passwd out into separate struct
virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
* src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
argument
* src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
struct containing VNC password
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
Commit 06f81c63eb attempted to make
QEMU driver ignore the failure to relabel 'stdin_path' if it was
on NFS. The actual result was that it ignores *all* failures to
label any aspect of the VM, unless stdin_path is non-NULL and
is not on NFS.
* src/qemu/qemu_driver.c: Treat all relabel failures as terminal
