Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit v1.2.4-52-gda879e5 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.
However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in
cmd 9 target pid 2135544 not found
error messages to appear in sanlock.log whenever we start a new domain.
This patch avoids this useless check for freshly started domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):
<devices>
<emulator>/usr/bin/qemu</emulator>
...
<panic>
</panic>
</devices>
Lets format "<panic/>" instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Depending on the flags passed, either attempt to return the active/live
IOThread data for the domain or the config data.
The active/live path will call into the Monitor in order to get the
IOThread data and then correlate the thread_id's returned from the
monitor to the currently running system/threads in order to ascertain
the affinity for each iothread_id.
The config path will map each of the configured IOThreads and return
any configured iothreadspin data
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.
For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.
The API supports either the --live or --config flag, but not both.
Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Pass the TPM file descriptor to QEMU via command line.
Instead of passing /dev/tpm0 we now pass /dev/fdset/10 and the additional
parameters -add-fd set=10,fd=20.
This addresses the use case when QEMU is started with non-root privileges
and QEMU cannot open /dev/tpm0 for example.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Implement virCommandPassFDGetFDIndex to determine the index a given
file descriptor will have when passed to the child process.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
In the old days of a global driver lock, it was necessary to unlock
the driver after a domain restore operation. When the global lock
was removed from the driver, some remnants were left behind in
libxlDomainRestoreFlags. Remove this unneeded (and incorrect) code.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Domain death watch is already disabled in libxlDomainCleanup. No
need to disable it a second and third time.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Well, the parallelsConnectOpen() joins several sub-driver openings
into one big if condition. If any of sub-driver fails to open, the
whole API finishes immediately. The problem is, sub-drivers may have
left some memory allocated. Fortunately, we have a free function for
that: parallelsConnectClose(). This is, however, not prepared for
partially allocated driver structure. So, prepare the free function
for it and call it at the right place, in the if body.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177219
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of copying the whole object onto stack when calling the
function, just pass the pointer to the object and save up some
space on the stack. Moreover, this prepares the code to hide the
virNetworkObjList structure into network_conf.c and use accessors
only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All of our vir*Free() functions should accept NULL, even though
that there's no way of actually passing NULL with current code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is probably a copy-paste error from virDomainObj*
counterpart. But when speaking of virNetworkObj we should use
variable @nets for an array of networks, rather than @doms. It's
just confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Moreover, there are two points within the function, where we're
missing 'goto cleanup'. Fix this too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Silly this bug went unnoticed so long. At the beginning we try to
find the passed network in the list of network objects. If found,
it's locked and real work takes place. Then, in the end, the
network object is never unlocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Okay, this is mainly for educational purposes since is called
from single point only with all the possible locks held. So
there's no way for other thread to hop in and do something wrong.
Nevertheless, we should not give bad example.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1197600
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of checking defaultMode for every channel that has no mode
configured, test it only once outside of channel loop. This fixes a bug
that in case all possible channels are fore example set to insecure, but
defaultMode is set to secure, we wouldn't auto-generate TLS port. This
results in failure while starting a guest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143832
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
