A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation. Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.
This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html
Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase). However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.
For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active
+ These are equivalent:
virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.
+ These are equivalent:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.
+ Similarly:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.
+ This version:
virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'
* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
* include/libvirt/libvirt.h.in: (Add macros for the param fields,
declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)
This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the network filter objects. No flags are supported
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the node device objects, supports to filter the results
by capability types.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNodeDeviceFlags
and virConnectListAllNodeDevices.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNodeDevices)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the interface objects, supported filtering flags
are: active|inactive.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
Simply returns the storage volume objects. No supported filter
flags.
include/libvirt/libvirt.h.in: Declare the API
python/generator.py: Skip the function for generating. virStoragePool.py
will be added in later patch.
src/driver.h: virDrvStoragePoolListVolumesFlags
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol to public
This introduces a new API to list the storage pool objects,
4 groups of flags are provided to filter the returned pools:
* Active or not
* Autostarting or not
* Persistent or not
* And the pool type.
include/libvirt/libvirt.h.in: New enum virConnectListAllStoragePoolFlags;
Declare the API.
python/generator.py: Skip the generating
src/driver.h: (virDrvConnectListAllStoragePools)
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol.
Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
With 0.10.0-rc0 out the door, we are committed to the next version
number.
* src/libvirt_public.syms (LIBVIRT_0.9.14): Rename...
(LIBVIRT_0.10.0): ...to this.
* docs/formatdomain.html.in: Fix fallout.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
Define new virConnect{Register,Unregister}CloseCallback() public APIs
which allows registering/unregistering a callback to be invoked when
the connection to a hypervisor is closed. The callback is provided
with the reason for the close, which may be 'error', 'eof', 'client'
or 'keepalive'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.
There was an inherent race between virDomainSnapshotNum() and
virDomainSnapshotListNames(), where an additional snapshot could
be created in the meantime, or where a snapshot could be deleted
before converting the name back to a virDomainSnapshotPtr. It
was also an awkward name: the function operates on domains, not
domain snapshots. virDomainSnapshotListChildrenNames() suffered
from the same inherent race, although its naming was nicer.
This patch makes things nicer by grabbing a snapshot list
atomically, in the format most useful to the user.
* include/libvirt/libvirt.h.in (virDomainListAllSnapshots)
(virDomainSnapshotListAllChildren): New declarations.
* src/libvirt.c (virDomainSnapshotListNames)
(virDomainSnapshotListChildrenNames): Add cross-references.
(virDomainListAllSnapshots, virDomainSnapshotListAllChildren):
New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainListAllSnapshots)
(virDrvDomainSnapshotListAllChildren): New callbacks.
* python/generator.py (skip_function): Prepare for later
hand-written versions.
This patch adds a new public api that lists domains. The new approach is
different from those used before. There are key points to this:
1) The list is acquired atomically and contains both active and inactive
domains (guests). This eliminates the need to call two different list
APIs, where the state might change in between the calls.
2) The returned list consists of virDomainPtrs instead of names or ID's
that have to be converted to virDomainPtrs anyways using separate calls
for each one of them. This is more convenient and saves hypervisor calls.
3) The returned list is auto-allocated. This saves a lot of hassle for
the users.
4) Built in support for filtering. The API call supports various
filtering flags that modify the output list according to user needs.
Available filter groups:
Domain status:
VIR_CONNECT_LIST_DOMAINS_ACTIVE, VIR_CONNECT_LIST_DOMAINS_INACTIVE
Domain persistence:
VIR_CONNECT_LIST_DOMAINS_PERSISTENT,
VIR_CONNECT_LIST_DOMAINS_TRANSIENT
Domain state:
VIR_CONNECT_LIST_DOMAINS_RUNNING, VIR_CONNECT_LIST_DOMAINS_PAUSED,
VIR_CONNECT_LIST_DOMAINS_SHUTOFF, VIR_CONNECT_LIST_DOMAINS_OTHER
Existence of managed save image:
VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE,
VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE
Auto-start option:
VIR_CONNECT_LIST_DOMAINS_AUTOSTART,
VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART
Existence of snapshot:
VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT,
VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT
5) The python binding returns a list of domain objects that is very neat
to work with.
The only problem with this approach is no support from code generators
so both RPC code and python bindings had to be written manually.
*include/libvirt/libvirt.h.in: - add API prototype
- clean up whitespace mistakes nearby
*python/generator.py: - inhibit generation of the bindings for the new
api
*src/driver.h: - add driver prototype
- clean up some whitespace mistakes nearby
*src/libvirt.c: - add public implementation
*src/libvirt_public.syms: - export the new symbol
Right now, starting from just a virDomainSnapshotPtr, and wanting to
know if it is the current snapshot for its respective domain, you have
to use virDomainSnapshotGetDomain(), then virDomainSnapshotCurrent(),
then compare the two names returned by virDomainSnapshotGetName().
It is a bit easier if we can directly query this information from the
snapshot itself.
Right now, it is possible to filter a snapshot listing based on
whether snapshots have metadata that would prevent domain deletion,
but the only way to learn if an individual snapshot has metadata is
to see if that snapshot appears in the list returned by a listing.
Additionally, I hope to expand the qemu driver in a future patch to
use qemu-img to reconstruct snapshot XML corresponding to internal
qcow2 snapshot names not otherwise tracked by libvirt (in part, so
that libvirt can guarantee that new snapshots are not created with
a name that would silently corrupt the existing portion of the qcow2
file); if I ever get that in, then it would no longer be an all-or-none
decision on whether snapshots have metadata, and becomes all the more
important to be able to directly determine that information from a
particular snapshot.
Other query functions (such as virDomainIsActive) do not have a flags
argument, but since virDomainHasCurrentSnapshot takes a flags argument,
I figured it was safer to provide a flags argument here as well.
* include/libvirt/libvirt.h.in (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New declarations.
* src/libvirt.c (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainSnapshotIsCurrent)
(virDrvDomainSnapshotHasMetadata): New driver callbacks.
virDomainSnapshotPtr has a refcount member, but no one was able
to use it. Furthermore, all of our other vir*Ptr objects have
a *Ref method to match their *Free method. Thankfully, this is
client-side only, so we can use this new function regardless of
how old the server side is! (I have future patches to virsh
that want to use it.)
* include/libvirt/libvirt.h.in (virDomainSnapshotRef): Declare.
* src/libvirt.c (virDomainSnapshotRef): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export it.
Qemu is adding the ability to do a partial rebase. That is, given:
base <- intermediate <- current
virDomainBlockPull will produce:
current
but qemu now has the ability to leave base in the chain, to produce:
base <- current
Note that current qemu can only do a forward merge, and only with
the current image as the destination, which is fully described by
this API without flags. But in the future, it may be possible to
enhance this API for additional scenarios by using flags:
Merging the current image back into a previous image (that is,
undoing a live snapshot), could be done by passing base as the
destination and flags with a bit requesting a backward merge.
Merging any other part of the image chain, whether forwards (the
backing image contents are pulled into the newer file) or backwards
(the deltas recorded in the newer file are merged back into the
backing file), could also be done by passing a new flag that says
that base should be treated as an XML snippet rather than an
absolute path name, where the XML could then supply the additional
instructions of which part of the image chain is being merged into
any other part.
* include/libvirt/libvirt.h.in (virDomainBlockRebase): New
declaration.
* src/libvirt.c (virDomainBlockRebase): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.10): Export it.
* src/driver.h (virDrvDomainBlockRebase): New driver callback.
* src/rpc/gendispatch.pl (long_legacy): Add exemption.
* docs/apibuild.py (long_legacy_functions): Likewise.
This patch adds API to modify domain metadata for running and stopped
domains. The api supports changing description, title as well as the
newly added <metadata> element. The API has support for storing data in
the metadata element using xml namespaces.
* include/libvirt/libvirt.h.in
* src/libvirt_public.syms
- add function headers
- add enum to select metadata to operate on
- export functions
* src/libvirt.c
- add public api implementation
* src/driver.h
- add driver support
* src/remote/remote_driver.c
* src/remote/remote_protocol.x
- wire up the remote protocol
* include/libvirt/virterror.h
* src/util/virterror.c
- add a new error message note that metadata for domain are
missing
We already provide ways to detect when a domain has been paused as a
result of I/O error, but there was no way of getting the exact error or
even the device that experienced it. This new API may be used for both.
add new API virDomainGetCPUStats() for getting cpu accounting information
per real cpus which is used by a domain. The API is designed to allow
future extensions for additional statistics.
based on ideas by Lai Jiangshan and Eric Blake.
* src/libvirt_public.syms: add API for LIBVIRT_0.9.10
* src/libvirt.c: define virDomainGetCPUStats()
* include/libvirt/libvirt.h.in: add virDomainGetCPUStats() header
* src/driver.h: add driver API
* python/generator.py: add python API (as not implemented)
Signed-off-by: Eric Blake <eblake@redhat.com>
This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.
Expose the new command via 'virsh vol-resize'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Add a new API virDomainShutdownFlags and define:
VIR_DOMAIN_SHUTDOWN_DEFAULT = 0,
VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1),
Also define some flags for the reboot API
VIR_DOMAIN_REBOOT_DEFAULT = 0,
VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1),
Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.
Add stub impls of the new API for all existing drivers
Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.
The APIs are used to set/get domain's network interface's parameters.
Currently supported parameters are bandwidth settings.
* include/libvirt/libvirt.h.in: new API and parameters definition
* python/generator.py: skip the Python API generation
* src/driver.h: add new entry to the driver structure
* src/libvirt_public.syms: export symbols
This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).
Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.
This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.
virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.
The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing
* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING
The previous API addition allowed traversal up the hierarchy;
this one makes it easier to traverse down the hierarchy.
In the python bindings, virDomainSnapshotNumChildren can be
generated, but virDomainSnapshotListChildrenNames had to copy
from the hand-written example of virDomainSnapshotListNames.
* include/libvirt/libvirt.h.in (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New prototypes.
(VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS): New flag alias.
* src/libvirt.c (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New functions.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSnapshotNumChildren)
(virDrvDomainSnapshotListChildrenNames): New callbacks.
* python/generator.py (skip_impl, nameFixup): Update lists.
* python/libvirt-override-api.xml: Likewise.
* python/libvirt-override.c
(libvirt_virDomainSnapshotListChildrenNames): New wrapper function.
Although a client can already obtain a snapshot's parent by
dumping and parsing the xml, then doing a snapshot lookup by
name, it is more efficient to get the parent in one step, which
in turn will make operations that must traverse a snapshot
hierarchy easier to perform.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetParent):
Declare.
* src/libvirt.c (virDomainSnapshotGetParent): New function.
* src/libvirt_public.syms: Export it.
* src/driver.h (virDrvDomainSnapshotGetParent): New callback.
These functions access internals of the opaque object, and do
not need any rpc counterpart. It could be argued that we should
have provided these when snapshot objects were first introduced,
since all the other vir*Ptr objects have at least a GetName accessor.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): Declare.
* src/libvirt.c (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): New
functions.
* src/libvirt_public.syms: Export them.
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to
prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings
* are
implemented later
* src/libvirt_public.syms: export symbols
* docs/apibuild.py: Extend 'unsigned long' parameter exception to this
* API
Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks. To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.
Also, virDomainGetXMLDesc didn't document its flags.
* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.
This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.
The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.
Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.
In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag. But virDomainSave was implemented
before our policy of all new APIs having a flag argument. Likewise
for virDomainRestore when restoring from a file.
The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.
* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.
This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.
Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.
This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.
We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.
The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains. While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl@us.ibm.com>
Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.
Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.
Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).
* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
This is the API agreed on in:
https://www.redhat.com/archives/libvir-list/2011-May/msg00026.html
(with a slight name change to use "...begin" rather than
"...start"). This implements transactional changes to the host network
config. When a transaction is begun with ncf_change_begin(), all other
netcf APIs will continue to work as they always have, but a snapshot
of the existing config will be taken, allowing reversion (rollback,
using ncf_change_rollback()) to the exact state of config at the time
ncf_change_begin() was called. Alternately, if it's determined that
the new changes are acceptable, ncf_change_commit() can be called,
which will eliminate the snapshot and make the changes permanent.
As a failsafe measure, if neither ncf_change_commit() or
ncf_change_rollback() is called by the next time the system reboots,
the netcf-transaction initscript will be automatically called to
rollback the changes.
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications
- The explicit QEMU migration URI, while using Peer2Peer
migration
- An override for the target VM XML
This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements
* include/libvirt/libvirt.h.in,
src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
and virDomainMigrateToURI2
Add public API for taking screenshots of current domain console.
* include/libvirt/libvirt.h.in: add virDomainScreenshot
* src/libvirt_public.syms: Export new symbol
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling
virEventRegister(....callbacks...)
The app would call
virEventRegisterDefaultImpl()
And then have a thread somewhere calling
static bool quit = false;
....
while (!quit)
virEventRunDefaultImpl()
* daemon/libvirtd.c, tools/console.c,
tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
VIR_FROM_EVENTS
The new virConnectGetSysinfo() API allows one to get the system
information associated to a connection host, providing the same
data as a guest that uses <os><smbios mode='host'/></os>, and in
a format that can be pasted into the guest and edited when using
<os><smbios mode='sysinfo'/></os>.
* include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare.
* src/libvirt_public.syms: Export new symbol.
introduce new public API "virDomainIsUpdated"
* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.
* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
updates for release of 0.8.0
* po/*.po po/libvirt.pot: updated a lar set of localizations, and merge
the messages
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
This patch implements the core driver and provides
- management functionality for managing the filter XMLs
- compiling the internal filter representation into ebtables rules
- applying ebtables rules on a network (tap,macvtap) interface
- tearing down ebtables rules that were applied on behalf of an
interface
- updating of filters while VMs are running and causing the firewalls to
be rebuilt
- other bits and pieces
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
