That way it actually fits with what the condition checks for.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This way we actually check for the proper error, not any error like invalid JSON
format.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It just so happens that our JSON snippets in
qemucapabilitiesdata/*.replies files are separated by an empty
line. These empty lines are then overwritten to make a single
line JSON. Nevertheless, the line counter @line is not
incremented which then leads to a misleading numbers in errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our secret driver divides secrets into two groups: ephemeral
(stored only in memory) and persistent (stored on disk). Now, the
aim of ephemeral secrets is to define them shortly before being
used and then undefine them. But 'shortly before being used' is a
very vague time frame. And since we default to socket activation
and thus pass '--timeout 120' to every daemon it may happen that
just defined ephemeral secret is gone among with the virtsecretd.
This is no problem for persistent secrets as their definition
(and value) is restored when the virtsecretd starts again, but
ephemeral secrets can't be restored.
Therefore, we could view ephemeral secrets as active objects that
the daemon manages and thus inhibit automatic shutdown (just like
hypervisor daemons do when a guest is running).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Xen 4.17 has strict parsing of 'soundhw' option that allows only
specific values (instead of passing through any value directly to
qemu's -soundhw option, it uses -device now). For 'intel-hda' audio
device, it requires "hda" string. "hda" works with older libxl too.
Other supported models are the same as in libvirt XML.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Xen supports only subset of libvirt's sound devices, and starting with
Xen 4.17 it is enforced by libxl. Verify it early.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Automatically free 'sec' and remove the 'cleanup' section and 'ret'
variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virStorageBackendRBDRADOSConfSet' logs its arguments but it's also
used to set the RBD secret/key.
All the security theatre with securely erasing the string we do to fetch
the secret would be quite pointless if we log it thus introduce
virStorageBackendRBDRADOSConfSetQuiet and use it to avoid logging the
password.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The initialization vector is not optional thus we also don't need to
check whether the caller passed it in. Additionally we can use c99
initializers for the gnutls_datum_t structs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'gnutls_datum_t' simply holds pointers to the encryption key and its
length. There's absolutely no point in securely erasing that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new backend type 'external' for connecting to a swtpm daemon
not managed by libvirtd.
Mostly in one commit, thanks to -Wswitch and the way we generate
capabilities.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 7.2 was released, update the capabilities data to the final state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
List the various options so that the most likely ones come
first.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Users are likely more interested in the main deployment
scenarios than in the detailed list of every existing RPM
package. Reorder sections accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Since the takeover of the bird site, the bulk of tech people who want
a more friendly and inclusive media site have jumped over to Mastodon.
With its decentralized nature, there's no one replacement that captures
everything, but the fosstodon.org site is a topic relevant choice.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The storage-backend/ and storage-file/ directories are currently
considered unowned by RPM. Have the libvirt-daemon package take
ownership of them, just as it already owns the connection-driver/
and lock-driver/ directories.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
In the past, the preferred policy
(VIR_DOMAIN_NUMATUNE_MEM_PREFERRED) required exactly one (host)
NUMA node. This made sense because:
1) the libnuma API - numa_set_preferred() allowed exactly one
node, because
2) corresponding kernel syscall (__NR_set_mempolicy) accepted
exactly one node (for MPOL_PREFERRED mode).
But things have changed since then. Firstly, kernel introduced
new MPOL_PREFERRED_MANY mode (v5.15-rc1~107^2~21) which was then
exposed in libnuma as numa_set_preferred_many() (v2.0.15~24).
Fortunately, libnuma also exposes numa_has_preferred_many() which
returns whether the kernel has support for the new mode (1) or
not (0).
Putting this all together, we can lift our check for sufficiently
new kernel and libnuma.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151064
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although the qemuMigrationSrcPerformResume actually got called
indirectly via qemuMigrationSrcPerformNative and the recovery process
worked, wrong job phases were used for the "perform" phase, which could
cause issues when libvirt daemon crashed (or was otherwise restarted)
during post-copy recovery.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It will need to be called from a place above its current definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When qemuDomainObjReleaseAsyncJob is called when the current async job
is already released we emit quite useless warning which was implemented
to warn about releasing a job owned by another thread.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function is called even if QEMU reports migration as
postcopy-paused, i.e., it's not migrating anymore. And while changing
the warning, we can drop the part about unattended migration to make the
warning shorter and consistent with qemuMigrationSrcPostcopyFailed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some cases when the internal state of disks can change
without qemu sending events about it (e.g. a disk can close
during reset). In case this happens, we should emit an event
about the modified disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1824722#c20
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While only a couple of the message types include sensitive data,
the overhead of calling secure erase is not noticable enough
to worry about making the erasure selective per type. Thus it is
simplest to unconditionally securely erase the buffer.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer length refers to the allocated buffer memory size,
while the offset refers to have much of the buffer we have
read/written. After reading the message payload we must thus
update the latter.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is available on at least FreeBSD and GLibc >= 2.25.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It may happen that xenlight pkgconfig file does not contain
'xenfirmwaredir' and/or 'libexec_bin' variables, which is okay
and we have code that deals with this situation. But that code is
executed when the queried value is an empty string. This may not
always be the case and we should specifically set 'default_value'
so that the empty string is returned if pkgconfig variable
doesn't exist.
Fixes: 968479adcf
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the formatcaps.rst we give an example output of capabilities.
Well, there are couple of issues with it:
1) We show <features/> nested under /capabilities/host/cpu.
There's no such element and never was.
2) The ordering of elements is corrupted.
3) There is plenty of elements missing.
Fix these by showing an actual output of 'virsh capabilities' as
obtained on my machine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently list the locale file paths via a wildcard in %files, but the
normal pattern for mingw RPMs in Fedora is to use %mingw_find_lang.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BPF_CGROUP_DEVICE constant was introduced to Linux in
commit ebc614f687369f9df99828572b1d85a7c2de3d92
Author: Roman Gushchin <roman.gushchin@linux.dev>
Date: Sun Nov 5 08:15:32 2017 -0500
bpf, cgroup: implement eBPF-based device controller for cgroup v2
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BPF_PROG_QUERY constant was introduced to Linux in
commit defd9c476fa6b01b4eb5450452bfd202138decb7
Author: Alexei Starovoitov <ast@kernel.org>
Date: Mon Oct 2 22:50:26 2017 -0700
libbpf: sync bpf.h
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VHOST_VSOCK_SET_GUEST_CID constant was introduced to Linux in
commit 433fc58e6bf2c8bd97e57153ed28e64fd78207b8
Author: Asias He <asias@redhat.com>
Date: Thu Jul 28 15:36:34 2016 +0100
VSOCK: Introduce vhost_vsock.ko
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The linux/magic.h header has existed since
commit e18fa700c9a31360bc8f193aa543b7ef7b39a06b
Author: Jeff Garzik <jeff@garzik.org>
Date: Sun Sep 24 11:13:19 2006 -0400
Move several *_SUPER_MAGIC symbols to include/linux/magic.h.
This is old enough that all our supported platforms can be assumed
to have this header.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The DEVLINK_CMD_ESWITCH_GET constant was introduced to Linux in
commit adf200f31c000d707e4afe238ed1d1199e0cce7c
Author: Jiri Pirko <jiri@mellanox.com>
Date: Thu Feb 9 15:54:33 2017 +0100
devlink: fix the name of eswitch commands
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The headers required by virnetdevbridge.c have all exited since
before Linux moved to git. It is sufficient to check for just
one of them in order to give an error message about needing
kernel headers installed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GET_VLAN_VID_CMD constant has existed since before Linux moved
to git.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GCOALESCE constant has existed since before Linux moved
to git.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GFEATURES constant was introduced to Linux in
commit 5455c6998d34dc983a8693500e4dffefc3682dc5
Author: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Tue Feb 15 16:59:17 2011 +0000
net: Introduce new feature setting ops
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_RXHASH constant was introduced to Linux in
commit b00fabb4020d17bda4bea59507e09fadf573088d
Author: stephen hemminger <shemminger@vyatta.com>
Date: Mon Mar 29 14:47:27 2010 +0000
netdev: ethtool RXHASH flag
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_NTUPLE constant was introduced to Linux in
commit 15682bc488d4af8c9bb998844a94281025e0a333
Author: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Date: Wed Feb 10 20:03:05 2010 -0800
ethtool: Introduce n-tuple filter programming support
This is old enough that all our supported platforms can be assumed
to have this feature.
A typo in the existing condition "NTUBLE" instead of "NTUPLE" meant the
code was never enabled in the first place, which is an illustration of
why it is worth eliminating redundant conditional checks.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_TXVLAN/RXVLAN constants were introduced to Linux in
commit d5dbda23804156ae6f35025ade5307a49d1db6d7
Author: Jesse Gross <jesse@nicira.com>
Date: Wed Oct 20 13:56:07 2010 +0000
ethtool: Add support for vlan accleration.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
