Automatically assign secret type from the disk source definition and
pull in adding of the comma. Then update callers to keep generated
output the same.
Before this patch, the translation function still needs a second ugly
helper function to actually format the command line for qemu. But if we
do the right stuff in the translation function, we don't have to bother
with the second function any more.
This patch removes the messy qemuBuildVolumeString function and changes
qemuTranslateDiskSourcePool to set stuff up correctly so that the
regular code paths meant for volumes can be used to format the command
line correctly.
For this purpose a new helper "qemuDiskGetActualType()" is introduced to
return the type of the volume in a pool.
As a part of the refactor the qemuTranslateDiskSourcePool function is
fixed to do decisions based on the pool type instead of the volume type.
This allows to separate pool-type-specific stuff more clearly and will
ease addition of other pool types that will require certain other
operations to get the correct pool source.
The previously fixed tests should make sure that we don't break stuff
that was working before.
When doing an internal snapshot on a VM with sheepdog or RBD disks we
would not set a flag to mark the domain is using internal snapshots and
might end up creating a mixed snapshot. Move the setting of the variable
to avoid this problem.
The virsh command 'domxml-to-native' (virConnectDomainXMLToNative())
converts all network devices to "type='ethernet'" in order to make it
more likely that the generated command could be run directly from a
shell (other libvirt network device types end up referencing file
descriptors for tap devices assumed to have been created by libvirt,
which can't be done in this case).
During this conversion, all of the netdev parameters are cleared out,
then specific items are filled in after changing the type. The MAC
address was not one of these preserved items, and the result was that
mac addresses in the generated commandlines were always
00:00:00:00:00:00.
This patch saves the mac address before the conversion, then
repopulates it afterwards, so the proper mac addresses show up in the
commandline.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
This nested job is canceled by the first ExitMonitor call (even though
it was not created by the corresponding EnterMonitor call), and
again in qemuMigrationPrepareAny if qemuProcessStart failed.
This can lead to a crash if the vm object was disposed of before calling
qemuDomainRemoveInactive:
0 ..62bc in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7ffce4cdd270) at util/virobject.c:166
1 ..6666 in virObjectIsClass at util/virobject.c:362
2 ..66b4 in virObjectLock at util/virobject.c:314
3 ..477e in virDomainObjListRemove at conf/domain_conf.c:2359
4 ..7a64 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2087
5 ..956c in qemuMigrationPrepareAny at qemu/qemu_migration.c:2469
This was added by commit e4e2822, exposed by 5a4c237 and c7ac251.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
If a SCSI hostdev is included in an initial domain XML, without a
corresponding controller statement, one is created silently when the
guest is booted.
When hotplugging a SCSI hostdev, a presumption is that the controller
is already present in the domain either from the original XML, or via
an earlier hotplug.
[root@xxxxxxxx ~]# cat disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='3' unit='1088438288'/>
</source>
</hostdev>
[root@xxxxxxxx ~]# virsh attach-device guest01 disk.xml
error: Failed to attach device from disk.xml
error: internal error: unable to execute QEMU command 'device_add': Bus 'scsi0.0' not found
Since the infrastructure is in place, we can also create a controller
silently for use by the hotplugged hostdev device.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
For systems without a PCI bus, attaching a SCSI controller fails:
[root@xxxxxxxx ~]# cat controller.xml
<controller type='scsi' model='virtio-scsi' index='0' />
[root@xxxxxxxx ~]# virsh attach-device guest01 controller.xml
error: Failed to attach device from controller.xml
error: XML error: No PCI buses available
A similar problem occurs with the detach of a controller:
[root@xxxxxxxx ~]# virsh detach-device guest01 controller.xml
error: Failed to detach device from controller.xml
error: operation failed: controller scsi:0 not found
The qemuDomainXXtachPciControllerDevice routines made assumptions
that any caller had a PCI bus. These routines now selectively calls
PCI functions where necessary, and assigns the device information
type to one appropriate for the bus in use.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
On the domain startup, this function is called to dump some info about
the CPUs. At the beginning of the function we check if we aren't running
older qemu which is not exposing the CPUs via 'qom-list'. However, we
are not checking for even older qemus, which throw 'CommandNotFound'
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Report the error in virPortAllocatorAcquire instead
of doing it in every caller.
The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE
This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.
QEMU 1.6.0 introduced new migration status: setup
Libvirt does not expect such string in QMP and refuses to migrate with error
"unexpected migration status in setup"
This patch fixes it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1025108
So far qemuSetupHostdevCGroup was called very early during hotplug, even
before we knew the device we were about to hotplug was actually
available. By calling the function later, we make sure QEMU won't be
allowed to access devices used by other domains.
Another important effect of this change is that hopluging USB devices
specified by vendor and product (but not by their USB address) works
again. This was broken since v1.0.5-171-g7d763ac, when the call to
qemuFindHostdevUSBDevice was moved after the call to
qemuSetupHostdevCGroup, which then used an uninitialized USB address.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
The aim of virObject refing and urefing is to tell where the object is
to be used and when is no longer needed. Hence any object shouldn't be
used after it has been unrefed, as we might be the last to hold the
reference. The better way is to call virObjectUnref() *after* the last
object usage. In this specific case, the monitor EOF handler was called
after the qemuMonitorIO called virObjectUnref. Not only that @mon was
disposed (which is not used in the handler anyway) but the @mon->vm
which is causing a SIGSEGV:
2013-11-15 10:17:54.425+0000: 20110: error : qemuMonitorIO:688 : internal error: early end of file from monitor: possible problem:
qemu-kvm: -incoming tcp:01.01.01.0:49152: Failed to bind socket: Cannot assign requested address
Program received signal SIGSEGV, Segmentation fault.
qemuProcessHandleMonitorEOF (mon=<optimized out>, vm=0x7fb728004170) at qemu/qemu_process.c:299
299 if (priv->beingDestroyed) {
(gdb) p *priv
Cannot access memory at address 0x0
(gdb) p vm
$1 = (virDomainObj *) 0x7fb728004170
(gdb) p *vm
$2 = {parent = {parent = {magic = 3735928559, refs = 0, klass = 0xdeadbeef}, lock = {lock = {__data = {__lock = 2, __count = 0, __owner = 20110, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0,
__next = 0x0}}, __size = "\002\000\000\000\000\000\000\000\216N\000\000\001", '\000' <repeats 26 times>, __align = 2}}}, pid = 0, state = {state = 0, reason = 0}, autostart = 0, persistent = 0,
updated = 0, def = 0x0, newDef = 0x0, snapshots = 0x0, current_snapshot = 0x0, hasManagedSave = false, privateData = 0x0, privateDataFreeFunc = 0x0, taint = 304}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the qemuProcessReconnectHelper() a new thread that does all the
interesting work is spawned. The rationale is to not block the daemon
startup process in case of unresponsive qemu. However, the thread
handler is a local variable which gets lost once the control goes out of
scope. Hence the thread gets leaked. We can avoid this if the thread
isn't made joinable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
The 'none' machine type is something only intended for use
by libvirt probing capabilities. It isn't something that
is useful for running real VM instances. As such it should
not be exposed to users in the capabilities.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virQEMUCapsProbeQMPMachineTypes method iterates over machine
types copying them into the qemuCapsPtr object. It only updates
the qemuCaps->nmachinetypes value at the end though. So if OOM
occurs in the middle, the destructor of qemuCapsPtr will not
free the partially initialized machine types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the managedsave image is corrupted, e.g. the XML part is, we fail to
parse it and throw an error, e.g.:
error: Failed to start domain jms8
error: XML error: missing security model when using multiple labels
This is okay, as we can't really start the machine and avoid undefined
qemu behaviour. On the other hand, the error message doesn't give a
clue to users what should they do. The consensus here would be to thrown
a warning to logs saying "Hey, you've got a corrupted file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves some code in the qemuDomainAttachSCSIDisk
function. The check for the existence of a PCI address assigned
to the SCSI controller was moved in order to be executed only
when needed. The PCI address of a controller is not necessary
if QEMU_CAPS_DEVICE is supported.
This fixes issues with the hotplug of SCSI disks on pseries guests.
When adding support for Q35 guests, the code to assign a PCI address
to the primary video card was moved into Q35 and i440fx(PIIX3)
specific functions, but no fallback was kept for other machine types
that might have a video card.
This patch remedies that by assigning a PCI address to the primary
video card if it does not have any kind of address. In particular,
this fixes issues with pseries guests.
Signed-off-by: Vitor de Lima <vitor.lima@eldorado.org.br>
Signed-off-by: Laine Stump <laine@laine.org>
When starting a VM the qemu process may filter out some requested
features of a domain as it's not supported either by the host or by
qemu. Libvirt didn't check if this happened which might end up in
changing of the guest ABI when migrating.
The proof of concept implementation adds the check for the recently
introduced kvm_pv_unhalt cpuid feature bit. This feature depends on both
qemu and host kernel support and thus increase the possibility of guest
ABI breakage.
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since 86d90b3a (yes, my patch; again) we are supporting NBD storage
migration. However, on error recovery path we got the steps reversed.
The correct order is: return NBD port to the virPortAllocator and then
either unlock the vm or remove it from the driver. Not vice versa.
==11192== Invalid write of size 4
==11192== at 0x11488559: qemuMigrationPrepareAny (qemu_migration.c:2459)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
==11192== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==11192== by 0x5212127: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
==11192== by 0x5211C86: virNetServerProgramDispatch (virnetserverprogram.c:305)
==11192== by 0x520A8FD: virNetServerProcessMsg (virnetserver.c:165)
==11192== by 0x520A9E1: virNetServerHandleJob (virnetserver.c:186)
==11192== by 0x50DA78F: virThreadPoolWorker (virthreadpool.c:144)
==11192== by 0x50DA11C: virThreadHelper (virthreadpthread.c:161)
==11192== Address 0x1368baa0 is 576 bytes inside a block of size 688 free'd
==11192== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11192== by 0x5079A2F: virFree (viralloc.c:580)
==11192== by 0x11456C34: qemuDomainObjPrivateFree (qemu_domain.c:267)
==11192== by 0x50F41B4: virDomainObjDispose (domain_conf.c:2034)
==11192== by 0x50C2991: virObjectUnref (virobject.c:262)
==11192== by 0x50F4CFC: virDomainObjListRemove (domain_conf.c:2361)
==11192== by 0x1145C125: qemuDomainRemoveInactive (qemu_domain.c:2087)
==11192== by 0x11488520: qemuMigrationPrepareAny (qemu_migration.c:2456)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of my previous patches (c7ac2519b7) did try to fix the issue when
domain dies too soon during migration. However, this clumsy approach was
missing removal of qemuProcessHandleMonitorDestroy resulting in double
unrefing of mon->vm and hence producing the daemon crash:
==11843== Invalid read of size 4
==11843== at 0x50C28C5: virObjectUnref (virobject.c:255)
==11843== by 0x1148F7DB: qemuMonitorDispose (qemu_monitor.c:258)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
==11843== Address 0x13b88864 is 4 bytes inside a block of size 136 free'd
==11843== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11843== by 0x5079A2F: virFree (viralloc.c:580)
==11843== by 0x50C29E3: virObjectUnref (virobject.c:270)
==11843== by 0x114770E4: qemuProcessHandleMonitorDestroy (qemu_process.c:1103)
==11843== by 0x1148F7CB: qemuMonitorDispose (qemu_monitor.c:257)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we are checking if qemu supports 'nbd-server-start'. This,
however, makes no sense on the source as nbd-server-* is used on the
destination. On the source the 'drive-mirror' is used instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the 90139a62 commit the error is copied into mon->lastError but
it's never freed from there.
==31989== 395 bytes in 1 blocks are definitely lost in loss record 877 of 978
==31989== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==31989== by 0x7EAF129: strdup (in /lib64/libc-2.15.so)
==31989== by 0x50D586C: virStrdup (virstring.c:554)
==31989== by 0x50976C1: virCopyError (virerror.c:191)
==31989== by 0x5097A35: virCopyLastError (virerror.c:312)
==31989== by 0x114909A9: qemuMonitorIO (qemu_monitor.c:690)
==31989== by 0x509BEDE: virEventPollDispatchHandles (vireventpoll.c:501)
==31989== by 0x509C701: virEventPollRunOnce (vireventpoll.c:648)
==31989== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==31989== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==31989== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there's a migration cancelled, the bitmap of migration port should be
cleaned up too.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Coverity complains that the call to virPCIDeviceDetach() in
qemuPrepareHostdevPCIDevices() doesn't check status return like
other calls. Seems this just was lurking until a recent change
to this module resulted in Coverity looking harder and finding
the issue. Introduced by 'a4efb2e33' when function was called
'pciReAttachDevice()'
Just added a ignore_value() since it doesn't appear to matter
if the call fails since we're on a failure path already.
Include reference of the VM object pointer and name in debug
logs for QEMU start/stop functions. Also make sure we log the
PID that we started, since it isn't available elsewhere in the
logs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In debugging a recent oVirt/libvirt race condition, I was very
frustrated by lack of logging in the job enter/exit code. This
patch adds some key data which would have been useful in by
debugging attempts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'error' cleanup block in qemuProcessReconnect() had a
'return' statement in the middle of it. This caused a leak
of virConnectPtr & virQEMUDriverConfigPtr instances. This
was identified because netcf recently started checking its
refcount in libvirtd shutdown:
netcfStateCleanup:109 : internal error: Attempt to close netcf state driver with open connections
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding an automatically allocated port to a well-formed migration
URI, keep it well-formed:
tcp://1.2.3.4/ -> tcp://1.2.3.4/:12345 # wrong
tcp://1.2.3.4/ -> tcp://1.2.3.4:12345/ # fixed
tcp://1.2.3.4 -> tcp://1.2.3.4:12345 # still works
tcp:1.2.3.4 -> tcp:1.2.3.4:12345 # still works (old syntax)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch (and the two patches that precede it) resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1005682
When libvirt was changed to delay the final cleanup of device removal
until the qemu process had signaled it with a DEVICE_DELETED event for
that device, the hostdev removal function
(qemuDomainRemoveHostDevice()) was written to properly handle the
removal of a hostdev that was actually an SRIOV virtual function
(defined with <interface type='hostdev'>). However, the function used
to search for a device matching the alias name provided in the
DEVICE_DELETED message (virDomainDefFindDevice()) would search through
the list of netdevs before hostdevs, so qemuDomainRemoveHostDevice()
was never called; instead the netdev function,
qemuDomainRemoveNetDevice() (which *doesn't* properly cleanup after
removal of <interface type='hostdev'>), was called.
(As a reminder - each <interface type='hostdev'> results in a
virDomainNetDef which contains a virDomainHostdevDef having a parent
type of VIR_DOMAIN_DEVICE_NET, and parent.data.net pointing back to
the virDomainNetDef; both Defs point to the same device info object
(and the info contains the device's "alias", which is used by qemu to
identify the device). The virDomainHostdevDef is added to the domain's
hostdevs list *and* the virDomainNetDef is added to the domain's nets
list, so searching either list for a particular alias will yield a
positive result.)
This function modifies the qemuDomainRemoveNetDevice() to short
circuit itself and call qemu DomainRemoveHostDevice() instead when the
actual device is a VIR_DOMAIN_NET_TYPE_HOSTDEV (similar logic to what
is done in the higher level qemuDomainDetachNetDevice())
Note that even if virDomainDefFindDevice() changes in the future so
that it finds the hostdev entry first, the current code will continue
to work properly.
This function was called in three places, and in each the call was
qualified by a slightly different conditional. In reality, this
function should only be called for a hostdev if all of the following
are true:
1) mode='subsystem'
2) type='pci'
3) there is a parent device definition which is an <interface>
(VIR_DOMAIN_DEVICE_NET)
We can simplify the callers and make them more consistent by checking
these conditions at the top ov qemuDomainHostdevNetConfigRestore and
returning 0 if one of them isn't satisfied.
The location of the call to qemuDomainHostdevNetConfigRestore() has
also been changed in the hot-plug case - it is moved into the caller
of its previous location (i.e. from qemuDomainRemovePCIHostDevice() to
qemuDomainRemoveHostDevice()). This was done to be more consistent
about which functions pay attention to whether or not this is one of
the special <interface> hostdevs or just a normal hostdev -
qemuDomainRemoveHostDevice() already contained a call to
networkReleaseActualDevice() and virDomainNetDefFree(), so it makes
sense for it to also handle the resetting of the device's MAC address
and vlan tag (which is what's done by
qemuDomainHostdevNetConfigRestore()).
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The header definition didn't match the function declaration, so adjusted
header to reflect the definition.
Found during a Coverity build where STATIC_ANALYSIS is enabled resulting
in the internal.h adding __nonnull__ handling to arguments.
Commit '6d264c91' added support for the qemuMonitorJSONDrivePivot() and
commit 'fbc3adc9' added a corresponding test which ended up triggering
the build failure which I didn't notice until today!
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The last argument of memmove is the amount of bytes to be moved. The
amount is in Bytes. We are moving some void pointers around. However,
since sizeof(void *) is not Byte on any architecture, we've got the
arithmetic wrong.
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
virDomainChrGetDomainPtrs() required 4 levels of pointers (taking
a parameter that will be used as an output variable to return the
address of another variable that contains an array of pointers).
This is rather complex to reason about, especially when outside
of the domain_conf file, no other caller should be modifying
the resulting array of pointers directly. Changing the public
signature gives something is easier to reason with, and actually
make const-correct; which is important as it was the only function
that was blocking virDomainDeviceDefCopy from treating its source
as const.
* src/conf/domain_conf.h (virDomainChrGetDomainPtrs): Use simpler
types, and make const-correct for external users.
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Split...
(virDomainChrGetDomainPtrsInternal): ...into an internal version
that lets us modify terms, vs. external form that is read-only.
(virDomainDeviceDefPostParseInternal, virDomainChrFind)
(virDomainChrInsert): Adjust callers.
* src/qemu/qemu_command.c (qemuGetNextChrDevIndex): Adjust caller.
(qemuDomainDeviceAliasIndex): Make const-correct.
Signed-off-by: Eric Blake <eblake@redhat.com>
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.
After my patches, some functions gained one more argument
(@listenAddress) which wasn't included in debug printing of
arguments they were called with. Functions in question are:
qemuMigrationPrepareDirect and qemuMigrationPerform.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed a SIGSEGV-ing libvirtd on the destination when the qemu
died too quickly = in Prepare phase. What is happening here is:
1) [Thread 3493] We are in qemuMigrationPrepareAny() and calling
qemuProcessStart() which subsequently calls qemuProcessWaitForMonitor()
and qemuConnectMonitor(). So far so good. The qemuMonitorOpen()
succeeds, however switching monitor to QMP mode fails as qemu died
meanwhile. That is qemuMonitorSetCapabilities() returns -1.
2013-10-08 15:54:10.629+0000: 3493: debug : qemuMonitorSetCapabilities:1356 : mon=0x14a53da0
2013-10-08 15:54:10.630+0000: 3493: debug : qemuMonitorJSONCommandWithFd:262 : Send command '{"execute":"qmp_capabilities","id":"libvirt-1"}' for write with FD -1
2013-10-08 15:54:10.630+0000: 3493: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=17 events=13
...
2013-10-08 15:54:10.631+0000: 3493: debug : qemuMonitorSend:956 : QEMU_MONITOR_SEND_MSG: mon=0x14a53da0 msg={"execute":"qmp_capabilities","id":"libvirt-1"}
fd=-1
2013-10-08 15:54:10.631+0000: 3262: debug : virEventPollRunOnce:641 : Poll got 1 event(s)
2) [Thread 3262] The event loop is trying to do the talking to monitor.
However, qemu is dead already, remember?
2013-10-08 15:54:13.436+0000: 3262: error : qemuMonitorIORead:551 : Unable to read from monitor: Connection reset by peer
2013-10-08 15:54:13.516+0000: 3262: debug : virFileClose:90 : Closed fd 25
...
2013-10-08 15:54:13.533+0000: 3493: debug : qemuMonitorSend:968 : Send command resulted in error internal error: early end of file from monitor: possible problem:
3) [Thread 3493] qemuProcessStart() failed. No big deal. Go to the
'endjob' label and subsequently to the 'cleanup'. Since the domain is
not persistent and ret is -1, the qemuDomainRemoveInactive() is called.
This has an (unpleasant) effect of virObjectUnref()-in the @vm object.
Unpleasant because the event loop which is about to trigger EOF callback
still holds a pointer to the @vm (not the reference). See the valgrind
output below.
4) [Thread 3262] So the event loop starts triggering EOF:
2013-10-08 15:54:13.542+0000: 3262: debug : qemuMonitorIO:729 : Triggering EOF callback
2013-10-08 15:54:13.543+0000: 3262: debug : qemuProcessHandleMonitorEOF:294 : Received EOF on 0x14549110 'migt10'
And the monitor is cleaned up. This results in calling
qemuProcessHandleMonitorEOF with the @vm pointer passed. The pointer is
kept in qemuMonitor struct.
==3262== Thread 1:
==3262== Invalid read of size 4
==3262== at 0x77ECCAA: pthread_mutex_lock (in /lib64/libpthread-2.15.so)
==3262== by 0x52FAA06: virMutexLock (virthreadpthread.c:85)
==3262== by 0x52E3891: virObjectLock (virobject.c:320)
==3262== by 0x11626743: qemuProcessHandleMonitorEOF (qemu_process.c:296)
==3262== by 0x11642593: qemuMonitorIO (qemu_monitor.c:730)
==3262== by 0x52BD526: virEventPollDispatchHandles (vireventpoll.c:501)
==3262== by 0x52BDD49: virEventPollRunOnce (vireventpoll.c:648)
==3262== by 0x52BBC68: virEventRunDefaultImpl (virevent.c:274)
==3262== by 0x542D3D9: virNetServerRun (virnetserver.c:1112)
==3262== by 0x11F368: main (libvirtd.c:1513)
==3262== Address 0x14549128 is 24 bytes inside a block of size 136 free'd
==3262== at 0x4C2AF5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3262== by 0x529B1FF: virFree (viralloc.c:580)
==3262== by 0x52E3703: virObjectUnref (virobject.c:270)
==3262== by 0x531557E: virDomainObjListRemove (domain_conf.c:2355)
==3262== by 0x1160E899: qemuDomainRemoveInactive (qemu_domain.c:2061)
==3262== by 0x1163A0C6: qemuMigrationPrepareAny (qemu_migration.c:2450)
==3262== by 0x1163A923: qemuMigrationPrepareDirect (qemu_migration.c:2626)
==3262== by 0x11682D71: qemuDomainMigratePrepare3Params (qemu_driver.c:10309)
==3262== by 0x53B0976: virDomainMigratePrepare3Params (libvirt.c:7266)
==3262== by 0x1502D3: remoteDispatchDomainMigratePrepare3Params (remote.c:4797)
==3262== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==3262== by 0x54322EB: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
The mon->vm is set in qemuMonitorOpenInternal() which is the correct
place to increase @vm ref counter. The correct place to decrease the ref
counter is then qemuMonitorDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994364
Whenever we check for ABI stability, we have new xml (e.g. provided by
user, or obtained from snapshot, whatever) which we compare to old xml
and see if ABI won't break. However, if the new xml was produced via
virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some
devices, e.g. 'pci-root' controller. Hence, the ABI stability check
fails even though it is stable. Moreover, we can't simply fix
virDomainDefCheckABIStability because removing the correct devices is
task for the driver. For instance, qemu driver wants to remove the usb
controller too, while LXC driver doesn't. That's why we need special
qemu wrapper over virDomainDefCheckABIStability which removes the
correct devices from domain XML, produces MIGRATABLE xml and calls the
check ABI stability function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of the function qemuPrepareHostdevPCICheckSupport() is
called. After that @pcidevs is initialized. However, if the very first
command fails, we go to 'cleanup' label where virObjectUnref(pcidevs) is
called. Obviously, it is called before @pcidevs was able to get
initialized. Compiler warns about it:
CC qemu/libvirt_driver_qemu_impl_la-qemu_hostdev.lo
qemu/qemu_hostdev.c: In function 'qemuPrepareHostdevPCIDevices':
qemu/qemu_hostdev.c:824:19: error: 'pcidevs' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virObjectUnref(pcidevs);
^
cc1: all warnings being treated as errors
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Add code to check availability of PCI passhthrough using VFIO and the
legacy KVM passthrough and use it when starting VMs and hotplugging
devices to live machine.
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1012824https://bugzilla.redhat.com/show_bug.cgi?id=1012834
Note that a similar problem was reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
but the fix only worked for <interface type='hostdev'>, *not* for
<interface type='network'> where the network itself was a pool of
hostdevs.
The symptom in both cases was this error message:
internal error: Unable to determine device index for network device
In both cases the cause was lack of proper handling for netdevs
(<interface>) of type='hostdev' when scanning the netdev list looking
for alias names in qemuAssignDeviceNetAlias() - those that aren't
type='hostdev' have an alias of the form "net%d", while those that are
hostdev use "hostdev%d". This special handling was completely lacking
prior to the fix for Bug 827519 which was:
When searching for the highest alias index, libvirt looks at the alias
for each netdev and if it is type='hostdev' it ignores the entry. If
the type is not hostdev, then it expects the "net%d" form; if it
doesn't find that, it fails and logs the above error message.
That fix works except in the case of <interface type='network'> where
the network uses hostdev (i.e. the network is a pool of VFs to be
assigned to the guests via PCI passthrough). In this case, the check
for type='hostdev' would fail because it was done as:
def->net[i]->type == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares what was written in the config) when it actually
should have been:
virDomainNetGetActualType(def->net[i]) == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares the type of netdev that was actually allocated from
the network at runtime).
Of course the latter wouldn't be of any use if the netdevs of
type='network' hadn't already acquired their actual network connection
yet, but manual examination of the code showed that this is never the
case.
While looking through qemu_command.c, two other places were found to
directly compare the net[i]->type field rather than getting actualType:
* qemuAssignDeviceAliases() - in this case, the incorrect comparison
would cause us to create a "net%d" alias for a netdev with
type='network' but actualType='hostdev'. This alias would be
subsequently overwritten by the proper "hostdev%d" form, so
everything would operate properly, but a string would be
leaked. This patch also fixes this problem.
* qemuAssignDevicePCISlots() - would defer assigning a PCI address to
a netdev if it was type='hostdev', but not for type='network +
actualType='hostdev'. In this case, the actual device usually hasn't
been acquired yet anyway, and even in the case that it has, there is
no practical difference between assigning a PCI address while
traversing the netdev list or while traversing the hostdev
list. Because changing it would be an effective NOP (but potentially
cause some unexpected regression), this usage was left unchanged.
When querying for kvm, we try to find 'enabled' field. Hence the error
message should report we haven't found 'enabled' and not 'running'
(which is not even in the reply). Probably a typo or copy-paste error.
The qemuDomainChangeNet() is called when 'virsh update-device' is
invoked on a NIC. Currently, we fail to update the QoS even though
we have routines for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This basically covers the talking-to-monitor part of
virQEMUCapsInitQMP. The patch itself has no real value,
but it creates an entity to be tested in the next patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The change in ef29de14c3 that introduced
better error logging from qemu introduced a warning from coverity about
unused return value from lseek. Silence this warning and fix typo in the
corresponding error message.
Reported by: John Ferlan
https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case A)
While activeScsiHostdevs and webSocketPorts were allocated in
qemuStateInitialize, they were not freed in qemuStateCleanup.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case D)
qemuProcessStart created two references to virQEMUDriverConfigPtr before
calling fork():
cfg = virQEMUDriverGetConfig(driver);
...
hookData.cfg = virObjectRef(cfg);
However, the child only unreferenced hookData.cfg and the parent only
removed the cfg reference. That said, we don't need to increment the
reference counter when assigning cfg to hookData. Both the child and the
parent will correctly remove the reference on cfg (the child will do
that through hookData).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The return value of virDomainControllerFind >=0 means that
the specific controller was found.
But some functions invoke it and treat 0 as not found.
This patch fix these incorrect invocation.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
If qemuParseCommandLine finds an arg it does not understand
it adds it to the QEMU passthrough custom arg list. If the
qemuParseCommandLine method hits an error for any reason
though, it just does 'VIR_FREE(cmd)' on the custom arg list.
This means all actual args / env vars are leaked. Introduce
a qemuDomainCmdlineDefFree method to be used for cleanup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the call to virDomainControllerInsert fails in
qemuParseCommandLine, the controller struct is leaked.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'qemuStringToArgvEnv' method splits up a string of command
line env/args to an 'arglist' array. It then copies env vars
to a 'progenv' array and args to a 'progargv' array. When
copyin the env vars, it NULL-ifies the element in 'arglist'
that is copied.
Upon OOM the 'virStringListFree' is called on progenv and
arglist. Unfortunately, because the elements in 'arglist'
related to env vars have been set to NULL, the call to
virStringListFree(arglist) doesn't free anything, even
though some non-NULL args vars still exist later in the
array.
To fix this leak, stop NULL-ifying the 'arglist' elements,
and change the cleanup code to only free elements in the
'arglist' array, not 'progenv'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In a number of places in qemuParseCommandLineDisk, an error
is reported, but no 'goto error' jump is used. This causes
failure to report OOM conditions to the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If OOM occurs in qemuParseCommandLineDisk some intermediate
variables will be leaked when parsing Sheepdog or RBD disks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
