Commit Graph

237 Commits

Author SHA1 Message Date
Dwight Engen
14dd70cca2 build: fix missing include
virNWFilterSnoopAdjustPoll() uses a struct pollfd but poll.h is never included
nwfilter/nwfilter_dhcpsnoop.c:1297: error: 'struct pollfd' declared inside parameter list
2012-09-14 16:55:58 -06:00
Paul Eggert
15d2c9fad4 Pass a correct pointer type to localtime_r(3).
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]

Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t.  But now, it requires only that
tv_sec be big enough to hold a time_t.

This patch was needed for Emacs.  Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.

Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc.  That'd be
more work, though.  And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.

I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me.  But if someone wants to take the
more-ambitious approach that'd be fine, I expect.

For this particular case, though, how about if we avoid
the problem entirely?  libvirt doesn't need to use struct
timeval here at all.  It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
2012-09-04 17:20:08 -06:00
Jasper Lievisse Adriaanse
afa67b7743 Include an extra header needed for OpenBSD. 2012-09-04 10:45:18 -06:00
Nishank Trivedi
3044433f29 Fix issue of PF brought down if VF is 8021.Qbh and pci passthrough
If a 8021.Qbh network device supports SRIOV and its VF is being used
in pci passthrough mode, when the guest is shutdown or destroyed, the
PF inteface is also brought down. qemuDomainHostdevNetConfigRestore()
finds out the PF for provided hostdev (which is VF) and passes it to
virNetDevPortProfileDisassociate() as linkdev. Later, linkdev gets passed
to virNetDevSetOnline() where the interface is brought down by clearing
IFF_UP flag.

Bringing down a PF, when only VF is being brought down is not expected
behavior. This patch adds a check so that virNetDevSetOnline() is called
only for PF and not if device is a VF.

Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
2012-08-30 15:27:27 -04:00
Gene Czarcinski
f3868259ca dnsmasq: avoid forwarding queries without a domain
dnsmasq is forwarding a number of queries upstream that should not
be done.  There still remains an MX query for a plain name with no
domain specified that will be forwarded is dnsmasq has --domain=xxx
--local=/xxx/ specified. This does not happen with no domain name
and --local=// ... not a libvirt problem.

BTW, thanks again to Claudio Bley!
2012-08-22 11:36:39 -06:00
Stefan Hajnoczi
5b7f5a049c docs: fix blockpull/blockcopy bandwidth Mbps -> MiB/s
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-22 17:15:56 +02:00
J.B. Joret
5d4f8d9746 Support for Disk Geometry Override
A hypervisor may allow to override the disk geometry of drives.
Qemu, as an example with cyls=,heads=,secs=[,trans=].
This patch extends the domain config to allow the specification of
disk geometry with libvirt.

Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-08-21 15:30:07 -06:00
Thomas Woerner
bf156385a0 network: use firewalld instead of iptables, when available
* configure.ac, spec file: firewalld defaults to enabled if dbus is
  available, otherwise is disabled. If --with_firewalld is explicitly
  requested and dbus is not available, configure will fail.

* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
  signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
  When these are encountered, reload all the iptables reuls of all
  libvirt's virtual networks (similar to what happens when libvirtd is
  restarted).

* iptables, ebtables: use firewall-cmd's direct passthrough interface
  when available, otherwise use iptables and ebtables commands. This
  decision is made once the first time libvirt calls
  iptables/ebtables, and that decision is maintained for the life of
  libvirtd.

* Note that the nwfilter part of this patch was separated out into
  another patch by Stefan in V2, so that needs to be revised and
  re-reviewed as well.

================

All the configure.ac and specfile changes are unchanged from Thomas'
V3.

V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient.  V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.

The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.

IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.

This one-time initialization works well. However, I've encountered
problems with testing:

1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)

2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).

3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.

4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.
2012-08-21 13:40:58 -04:00
Daniel Veillard
ede82a6cfb Adding Sukadev Bhattiprolu 2012-08-15 15:57:53 +08:00
Asad Saeed
ff73c6d3bc sanlock: don't unlink lockspace if registration fails
This is a patch for bug 847848
If registering an existing lockspace with the sanlock daemon
returns an error, libvirt should not proceed to unlink the lockspace.

Signed-off-by: Asad Saeed <asad.saeed@acidseed.com>
2012-08-13 17:11:30 -06:00
Eric Blake
4c8cf29447 maint: add attribution for last patch
* AUTHORS: Add Frido Roose.
2012-08-13 10:32:50 -06:00
Peter Feiner
bfa74ebe1f Fix errno check, prevent spurious errors under heavy load
From man poll(2), poll does not set errno=EAGAIN on interrupt, however
it does set errno=EINTR. Have libvirt retry on the appropriate errno.

Under heavy load, a program of mine kept getting libvirt errors 'poll on
socket failed: Interrupted system call'. The signals were SIGCHLD from
processes forked by threads unrelated to those using libvirt.
2012-08-08 15:50:58 -06:00
Richa Marwaha
756fe7868b Add -netdev bridge capabilities
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.

Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
2012-08-06 16:56:59 +02:00
Gerd v. Egidy
57fb8d5336 maint: consolidate AUTHOR listings for Gerd von Egidy 2012-08-01 17:29:46 -06:00
Eric Blake
f7e04e3eff maint: spelling correction in AUTHORS
Ján Tomko has an accented name.
2012-07-25 08:01:24 -06:00
Jan Tomko
d9bbf217b1 virsh: Clarify that memtune parameters may be rounded in the man page 2012-07-24 15:34:49 -06:00
Ata E Husain Bohra
04d9cf8e6c ESX: Fix ESX_VI__TEMPLATE__DYNAMIC_DEEP_COPY
Fix addresses two issues:
1. Fix generator code to allow deep copy operation for objects with
   Dynamic_Cast capabilities.
2. Add missing deep copy routine to Long datatype.

Signed-off-by: Ata E Husain Bohra <ata.husain@hotmail.com>
2012-07-21 23:24:25 +02:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Chuck Short
db4eba91a7 ARMHF: CPU Support for armhf.
Adding CPU encoder/decoder for armhf to avoid runtime error messages.

Signed-off-by: Chuck Short <chuck.short@canonical.com>
2012-07-13 10:03:22 -06:00
Sascha Peilicke
5079a7b3e2 Fix directory removal in filesystem storage driver
Fix the virStorageBackendFileSystemVolDelete method to not use
unlink() unconditionally. It must use rmdir() for volumes which
are directories. It should also raise an error if given a volume
which has the network/block type.
2012-07-11 16:42:06 +01:00
Eric Blake
6bbbe53bea maint: update preferred contributor name
Based on off-list discussion with Royce.

* AUTHORS: Update to Royce Lv's preferred anglicized name.
* .mailmap: Likewise.
2012-07-09 13:05:06 -06:00
Josh Durgin
78290b1641 qemu: add rbd to whitelist of migration-safe formats
QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.

This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.

Reported-by: Vladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-02 14:52:27 -06:00
Eiichi Tsukata
0ac3baee2c Fix vm's outbound traffic control problem
Hello,

This is a patch to fix vm's outbound traffic control problem.

Currently, vm's outbound traffic control by libvirt doesn't go well.
This problem was previously discussed at libvir-list ML, however
it seems that there isn't still any answer to the problem.
http://www.redhat.com/archives/libvir-list/2011-August/msg00333.html

I measured Guest(with virtio-net) to Host TCP throughput with the
command "netperf -H".
Here are the outbound QoS parameters and the results.

outbound average rate[kilobytes/s] : Guest to Host throughput[Mbit/s]
======================================================================
1024  (8Mbit/s)                    : 4.56
2048  (16Mbit/s)                   : 3.29
4096  (32Mbit/s)                   : 3.35
8192  (64Mbit/s)                   : 3.95
16384 (128Mbit/s)                  : 4.08
32768 (256Mbit/s)                  : 3.94
65536 (512Mbit/s)                  : 3.23

The outbound traffic goes down unreasonably and is even not controled.

The cause of this problem is too large mtu value in "tc filter" command run by
libvirt. The command uses burst value to set mtu and the burst is equal to
average rate value if it's not set. This value is too large. For example
if the average rate is set to 1024 kilobytes/s, the mtu value is set to 1024
kilobytes. That's too large compared to the size of network packets.
Here libvirt applies tc ingress filter to Host's vnet(tun) device.
Tc ingress filter is implemented with TBF(Token Buckets Filter) algorithm. TBF
uses mtu value to calculate the amount of token consumed by each packet. With too
large mtu value, the token consumption rate is set too large. This leads to
token starvation and deterioration of TCP throughput.

Then, should we use the default mtu value 2 kilobytes?
The anser is No, because Guest with virtio-net device uses 65536 bytes
as mtu to transmit packets to Host, and the tc filter with the default mtu
value 2k drops packets whose size is larger than 2k. So, the most packets
is droped and again leads to deterioration of TCP throughput.

The appropriate mtu value is 65536 bytes which is equal to the maximum value
of network interface device defined in <linux/netdevice.h>. The value is
not so large that it causes token starvation and not so small that it
drops most packets.
Therefore this patch set the mtu value to 64kb(== 65535 bytes).

Again, here are the outbound QoS parameters and the TCP throughput with
the libvirt patched.

outbound average rate[kilobytes/s] : Guest to Host throughput[Mbit/s]
======================================================================
1024  (8Mbit/s)                    : 8.22
2048  (16Mbit/s)                   : 16.42
4096  (32Mbit/s)                   : 32.93
8192  (64Mbit/s)                   : 66.85
16384 (128Mbit/s)                  : 133.88
32768 (256Mbit/s)                  : 271.01
65536 (512Mbit/s)                  : 547.32

The outbound traffic conforms to the given limit.

Thank you,

Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
2012-06-29 10:56:13 +02:00
Michal Privoznik
d092aae120 AUTHORS: Update
Latest patchset enabling libvirt on s390(x) was developed by
  Viktor Mihajlovski   <mihajlov@linux.vnet.ibm.com>
  Thang Pham           <thang.pham@us.ibm.com>
Add them to the AUTHORS file.
2012-06-25 16:56:44 +02:00
Gerd Hoffmann
fd4fd420b4 qemu: Add xhci support
qemu 1.1 features a xhci controller,
this patch adds support for it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-21 16:33:00 +02:00
Dipankar Sarma
d1778b7148 Fix default USB controller for ppc64
Fix the default usb controller for pseries systems if none
specified.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
2012-06-19 15:41:55 -06:00
Osier Yang
d41d252694 Update AUTHORS
Commit a80bb970 forgot to update authors.
2012-06-11 22:08:09 +08:00
Beat Jörg
7508338ff3 Fix for parallel port passthrough for QEMU
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.

It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0

The first parameter is "tty". It sould be "parport".

If I launch qemu with -chardev parport,... it works as expected.

I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:

https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-06-04 16:46:23 -06:00
Radu Caragea
107f51b69c Fix sync issue in virNetClientStreamEventRemoveCallback
The stream lock is unlocked twice instead of being locked and then
unlocked. Probably a typo.
2012-06-04 09:32:37 +02:00
Marti Raudsepp
195fa214b6 qemu: move -name arg to be 1st in "ps x" output
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.

This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
2012-06-01 15:06:56 -06:00
David Weber
b8012ce931 sanlock: fix locking for readonly devices
Add ignore param for readonly and shared disk in sanlock
2012-05-14 16:44:09 -06:00
Eric Blake
aaf36b15a6 maint: fix AUTHORS
Use the address specified in the actual commit, to placate
'make syntax-check'.
2012-05-14 09:14:19 -06:00
William Jon McCann
32a9aac2e0 Use XDG Base Directories instead of storing in home directory
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

This offers a number of advantages:
 * Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
 * Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
 * Supports performing smart or selective migration of settings
between different OS versions
 * Supports reseting settings without breaking things
 * Makes it possible to clear cache data to make room when the disk
is filling up
 * Allows us to write a robust and efficient backup solution
 * Allows an admin flexibility to change where data and settings are stored
 * Dramatically reduces the complexity and incoherence of the
system for administrators
2012-05-14 15:15:58 +01:00
Dmitry Guryanov
287737f413 util: add functions for interating over json object
Add function virJSONValueObjectKeysNumber, virJSONValueObjectGetKey
and virJSONValueObjectGetValue, which allow you to iterate over all
fields of json object: you can get number of fields and then get
name and value, stored in field with that name by index.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-05-03 09:07:25 -06:00
Eugen Feller
93b21be929 Added Snooze cloud manager to the IaaS section 2012-05-02 12:20:38 -06:00
Wido den Hollander
122fa379de storage: Allow multiple hosts for a storage pool
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.

This patch allows multiple source hosts and rewrites the current
storage drivers.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-04-30 18:44:44 +08:00
Ryan Woodsmall
b126715a48 esx: Fix segfault in esxConnectToHost
Caused by commit 4445e16bfa that
made the code used the connection private data pointer before
it was initialized.
2012-04-21 14:13:22 +02:00
Jan Kiszka
dde91ab917 Do not enforce source type of console[0]
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-04-16 22:24:20 -06:00
Daniel Veillard
360a88c317 Set Martin Kletzander as a commiter 2012-04-16 16:57:06 +08:00
MATSUDA, Daiki
257191c9e4 UML: fix iteration over consoles
I found typo in UML driver.

MATSUDA Daiki
2012-04-09 10:21:07 -06:00
Stefan Bader
fb98da0050 xen config: No vfb in HVM guest configuration
This causes an implicit vkbd device to be added which takes
6min to finally fail being initialized in the guest.

http://lists.xen.org/archives/html/xen-devel/2012-04/msg00409.html

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
2012-04-06 12:54:16 +08:00
Ilja Livenson
37075dfe6c openvz: support vzctl 3.1
https://bugzilla.redhat.com/show_bug.cgi?id=809895

Basically, openvz dropped strict version numbering (3.1 vs 3.1.0),
which caused parsing to fail.
2012-04-04 14:32:15 -06:00
Christian Benvenuti
a02500d010 qemu: Make migration fail when port profile association fails on the dst host
In the current V3 migration protocol, Libvirt does not
check the result of the function

  qemuMigrationVPAssociatePortProfiles

This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.

With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.

Signed-off by: Christian Benvenuti <benve@cisco.com>
2012-03-28 10:45:22 -06:00
Stef Walter
53e1d56dd4 Change the default of mdns_adv to false
* Don't advertise information on the network without consent of
   the user, either through manual configuration, or a user
   interface that drives this option.
 * Since libvirtd must be configured for network access anyway
   (for all but ssh), this setting was not useful "out of the box",
   so changing this default setting does not remove "out of the box"
   functionality.
2012-03-27 09:54:49 -06:00
Li Zhang
8120325750 Add qemu support for ppc64 on FC16 or above for rpm packaging
On Fedora16 or above, qemu is supported now. So it is added
in rpm packaging.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2012-03-23 12:40:13 -04:00
Peng Zhou
896e6ac4f8 qemu: spice agent-mouse support
spice agent-mouse support

Usage:
  <graphics type='spice'>
    <mouse mode='client'|'server'/>
  <graphics/>

Signed-off-by: Osier Yang <jyang@redhat.com>
2012-03-09 15:26:24 +08:00
Duncan Rance
e91c8b1805 Build error on OSX in src/util/virnetlink.c
I'm building on OSX with no libnl. I had to do this to get src/util/virnetlink.c to compile:
2012-03-06 09:25:38 -07:00
Benjamin Cama
cff5573da2 virterror: Misleading error message when name is missing
[forwarding this here from RH bug #796732]

When creating a network (virsh net-create) with an erroneous XML
containing an empty <name> element, the error message is misleading:

error: Failed to create network from foo.xml
error: missing domain name information

It took me a bit of time to figure out that it was the *network* name
that was missing (I generate this xml and didn't look at it, first).

I realized that the same message is used for missing name when creating
a domain, network, or device node.
2012-02-23 16:31:45 -07:00
Peter Robinson
cb8b9963fe spec: use ix86 macros
* libvirt.spec.in: Use %{ix86} rather than open-coded list.
2012-02-20 09:37:52 -07:00
Lincoln Myers
102690648d Fix compilation on MacOS X
* src/util/virfile.h: the virFileWrapperFdFlags being defined as
  a globa variable instead of a type ended up generating a duplicate
  symbol error.
* AUTHORS: added Lincoln Myers
2012-02-20 11:21:00 +08:00