Now that we no longer support testing HMP monitor,
the json field is pointless.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We return success when running this function for either non-JSON monitor
testing or guest agent testing.
However we no longer test HMP monitor and we do not try to validate
the guest agent interaction.
Drop the test->json check and report a proper error if someone tries
to run this function for the guest agent without properly wiring it up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The QMP monitor only uses a newline to separate lines,
while HMP and the guest agent also use a carriage return.
In preparation to dropping support for testing HMP interaction,
only skip the carriage return if we're dealing with the guest agent,
removing the need to check the 'json' field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Update the capabilities from a non-upstream version (9c70209b63 is not
in qemu.git) to qemu upstream commit 33d6099906 (2019/06/18) so that we
get the QMP schema 'features' field support and are able to detect that
the 'file' block backend supports dynamic auto-read-only.
Note that I've rebuilt this on a machine with a more modern kernel and
microcode which exposes e.g. the recent CPU bug mitigations, thus I
opted to keep the CPU changes rather than trying to do a franken-caps
by updating only the output of query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default query-cpu-model-expansion only reports canonical names of all
CPU features. We do some magic and call the command twice to get all
possible spellings of the features, but being able to consume canonical
names will allow us to drop this magic.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we call query-cpu-model-expansion will rely on some capabilities
bits. Let's make sure all capabilities are set before probing host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use it to check whether QEMU supports a specific CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This should cover all CPU features for which QEMU prefers spelling that
differs from the one used by libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Newer QEMU will translate the feature names to their canonical names so
4.0.0 is the last one which produces the results we currently have in
*-latest.args.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normal CPU features use modern -cpu ...,feature=on|off syntax when
available, but kvm features kept using the old +feature or -feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These test check all kvm CPU features that could be passed to the -cpu
option by libvirt.
The 2.7.0 version is the last one for which we use +|-feature syntax for
CPU features, while feature=on|off is used with newer versions. This
is visible in the following patch which changes only the *-latest.args
files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is no obvious benefit in putting the escaped message
back into msg while tmp holds the original message.
Remove the assignment and use 'tmp' directly'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that all the callers call qemuMonitorTestNew with json=true,
remove the argument and always assume JSON.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The only user of the qemuMonitorTestNewSimple macro is using JSON.
Always pass 'true' to qemuMonitorTestNew and remove the 'json'
argument.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
At this point, all test programs that use qemu_LDADDS also
use LDADDS, so we can remove a bunch of repetition by simply
including the latter in the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We optionally include QEMU and LXC support in this test and
depending on which is enabled (if either is enabled at all) we
need to link in different objects.
Right now we implicitly depend on the fact that qemu_LDADDS is
empty when QEMU is not enabled to get the correct set of objects,
but it's better to be explicit about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We want all test programs using qemu_LDADDS to also use LDADDS,
and cputest is the only existing exception.
We can't just replace GNULIB_LIBS with LDADDS though, even though
the latter is a superset of the former, because that would result
in a linking error due to including the same object twice:
/usr/bin/ld:
../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
multiple definition of `libvirt_object_new_semaphore';
../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
first defined here
To work around this, we include both qemu_LDADDS and LDADDS when
QEMU support is enabled, and just LDADDS otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When specifying extra params for spcie TLS verification, it's necessary
to pass a weird URI to it. Let's add a test for this case where the TLS
string contains a space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Determine whether the test has failed after running all the cases so
that we don't need to rerun it multiple times to see all problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_TEST_VERBOSE instead. This fixes the following syntax check
problem:
tests/qemumonitorjsontest.c:1409: virReportError(VIR_ERR_INTERNAL_ERROR, "arr should have been cleared");
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups. Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support. Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).
Existing code is not affected by the new capabilities.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.
Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Time to remove the cleanup labels rendered useless in the previous
patch. There are still plenty of other tests that could be further
simplified, but I've already spent enough time in this file for now.
Signed-off-by: Eric Blake <eblake@redhat.com>
The DO_TEST() macro in qemumonitorjsontest.c was not passing the
schema through, which meant that we were not validating any of those
tests for correct usage according to the schema.
In the process of mechanically altering tests to pass the schema
through, use VIR_AUTOPTR on all of the affected test instances. The
next patch will do some further cleanups that it exposes.
Tested by using this hack, where the test mistakenly passed pre-patch,
but correctly diagnosed the garbage post-patch:
| diff --git i/src/qemu/qemu_monitor_json.c w/src/qemu/qemu_monitor_json.c
| index 53a7de8b77..86d8450814 100644
| --- i/src/qemu/qemu_monitor_json.c
| +++ w/src/qemu/qemu_monitor_json.c
| @@ -1532,7 +1532,8 @@ qemuMonitorJSONGetStatus(qemuMonitorPtr mon,
| if (reason)
| *reason = VIR_DOMAIN_PAUSED_UNKNOWN;
|
| - if (!(cmd = qemuMonitorJSONMakeCommand("query-status", NULL)))
| + if (!(cmd = qemuMonitorJSONMakeCommand("query-status",
| + "s:garbage", "foo", NULL)))
| return -1;
|
| if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Simplify the GEN_TEST_FUNC() and target of the DO_TEST_SIMPLE() macros
by using autoptr support.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Upcoming tests are going to use VIR_AUTOPTR to simplify test cleanup.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Pass in the schema since it works with the 'file' test now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pass in the schema data from the caller if QMP schema testing is
desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In case when we are testing a QMP command we can try to schema check it
so that we catch inconsistencies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The qemuTestParseCapabilitiesArch call would eventually lead to the host
CPU being probed via virCPUGetHost. Let's divert this to a mocked
version already used by the qemuxml2argvtest.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function is renamed as virQEMUCapsProbeHostCPU and it does not get
the list of allowed CPU models from qemuCaps anymore. This is
responsibility is moved to the caller. The result is just a very thin
wrapper around virCPUGetHost mostly required mocking in tests.
The generic function is used in place of a direct call to virCPUGetHost
in virQEMUCapsInitHostCPUModel to make sure tests don't accidentally
probe host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1426162
Turns out, some aarch64 systems have SMBIOS info. That means we
can use dmidecode to fetch some information. If that fails, fall
back to the old behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's nothing x86 specific about this function. Rename the
function so that it has DMI suffix which enables it to be reused
on different arches (as using X86 from say ARM would look
suspicious).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This test case uses (anonimized) data pulled from a
GIGABYTE R120-T34 server.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
We have a single mock dmidecode script right now, but we're
going to add another one soon, so we need to make sure its
name contains the test case name as a prefix, just like we
already do with all data files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability can be used to figure out whether the
QEMU binary at hand supports the machine type property
we need in order to enable SMMUv3 IOMMU support.
Unfortunately we can't avoid probing the RISC-V binaries
along with the ARM ones, since both architectures have
their own 'virt' machine type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Creating firewall rules for the virtual networks causes the kernel to
load the conntrack module. This imposes a significant performance
penalty on Linux network traffic. Thus we want to only take that hit if
we actually have virtual networks running.
We need to create global firewall rules during startup in order to
"upgrade" rules for any running networks created by older libvirt.
If no running networks are present though, we can safely delay setup
until the time we actually start a network.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Device validation should not have to wait until command line
generation time. Moving the code to a separate function also
allows us to avoid some unnecessary repetition.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure validation is working as intended by trying to use
Intel IOMMU with the i440fx machine type, though we know it's
a q35-only feature, and expecting an error to be returned.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can drop the intel-iommu-machine test case while doing so,
since it is supposed to showcase how we generate different
command lines for older QEMU versions and we can do that
using a single input file now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove a bunch of irrelevant devices and make sure all input
files explicitly opt out of USB controllers: the latter change
will help later, when we start using DO_TEST_CAPS_*().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the 'shallow' and 'reuse' flags as booleans rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the 'shallow' flag as a boolean argument rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If an FD is passed into a child using:
virCommandPassFD(cmd, fd, VIR_COMMAND_PASS_FD_CLOSE_PARENT);
then the parent should refrain from touching @fd thereafter. This
is even documented in virCommandPassFD() comment. The reason is
that either at virCommandRun()/virCommandRunAsync() or
virCommandFree() time the @fd will be closed. Closing it earlier,
e.g. right after virCommandPassFD() call might result in
undesired results. Another thread might open a file and receive
the same FD which is then unexpectedly closed by virCommandFree()
or virCommandRun().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know the full list of machine types supported
by the QEMU binary when probing machine type properties,
we can save some work (and eventually test suite churn,
as more architecture-specific machine types need to be
probed) by only probing machines that we know exist.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we're probing machine type properties using the
latest machine type rather than the "spapr-machine" parent,
we can finally discover properties that are not available
on all machine types.
This commit refreshes replies for QEMU 4.0.0 as well as
3.1.0 to show not only that we're actually discovering new
machine type properties this way, but also that the number
of available machine type properties increases with each
subsequent QEMU release.
If qom-list-properties had been available in QEMU 2.10.0,
we could now drop the explicit version number checks for
the QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT and
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT capabilities, but
unfortunately it wasn't, so we have to keep them around
still.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have the list of machine types available when
probing machine type properties, we can list properties for
the canonicalized version of the "pseries" machine type
instead of having to go through "spapr-machine", which we
know to be the parent type for all "pseries-*-machine"
types. By doing this, we'll be able to find even properties
that are only available from a certain versioned machine
type forward, and can't thus be obtained when looking at
the parent type only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We're going to need information about available machine types
when probing machine type properties soon, and that means we
have to change the order we call QMP commands.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
CPU features that always were a no-op in qemu got removed there.
We no more specify them as that would trigger errors and fail to start
qemu. This test ensures that those features really are not rendered into
qemu command line.
Without the related fix this test will trigger and fail like:
In 'tests/qemuxml2argvdata/cpu-no-removed-features.args':
Offset 371
Expect [ ]
Actual [,-osxsave,-ospke ]
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Qemu dropped cpu features for osxsave and ospke [1][2].
The reason for the instant removal is that those features were never
configurable as discussed in [3].
Fortunately the use cases adding those flags in the past are rare, but
they exist. One that I identified are e.g. older virt-install when used
with --cpu=host-model and there always could be the case of a user
adding it to the guest xml.
This triggers an issue like:
qemu-system-x86_64: can't apply global Broadwell-noTSX-x86_64-
cpu.osxsave=on: Property '.osxsave' not found
Ensure that this does no more break spawning newer qemu versions by
not rendering those features into the qemu command line.
Fixes: https://bugs.launchpad.net/fedora/+source/qemu/+bug/1825195
Resolves: https://bugzilla.redhat.com/1644848
[1]: https://git.qemu.org/?p=qemu.git;a=commit;h=f1a2352
[2]: https://git.qemu.org/?p=qemu.git;a=commit;h=9ccb978
[3]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg561877.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
The bit is set when microcode provides the mechanism to invoke a flush
of various exploitable CPU buffers by invoking the VERW instruction.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A double free may occur in testCompareXMLToArgvFiles() when @def
is freed right after virStoragePoolObjNew() failed and the second
time at cleanup label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Introduced by ff376c6283.
Previously, init_syms() was called from stat() mock and its
friends. This is crucial because checkPath() might call
printFile() which in turn calls real_fopen(). But if stat() or
one of its friends is the first function called then because of
lacking init_syms() call no real_* is initialized.
The other thing is that we really want the recorded action to be
"stat" instead of __FUNCTION__ because there's no good in
recording that it was __xstat64 who touched some file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If a program that is using this mock calls canonicalize_file_name()
as the very first function then it will face SIGSEGV because
real_canonicalize_file_name is uninitialized.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
In addition adjusting iothreads-virtio-scsi-ccw.s390x-latest.args to prevent
accidential drive id exposure by QEMU fixed by commit a1dce96236
(qemu: Use the 'device_id' property of SCSI disks to avoid regressing),
and also adjusting *s390x-latest.args files to qemu deprecation changes made
in commit e8c2c8bd07 (Prefer '-overcommit mem-lock' over -realtime mlock').
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Capture and update the 4.0.0 qemu version replies now that it was
released. I opted to keep the CPU differences as there was a qemu bug
which reported an empty string in CPU caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Return 1 if the schema entry was found optionally returning it rather
than depending on the returned object.
Some callers don't care which schema object belongs to the query, but
rather only want to know whether it exists. Additionally this will allow
introducing boolean queries for checking if enum values exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we technically test the query strings in the qemucapabilitiestest
this was done to help refactor and extend the QAPI schema query
infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virhostdevtest is using pci mock to emulate all PCI attach/detach
operations. This means that that this test does not rely on KVM
support of the host anymore and the tests in this file shouldn't
be affected by it.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If an error occurs in a virBuffer* API the idea is to free the
content immediately and set @error member used in error reporting
later. Well, this is not what how virBufferAddBuffer works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e159.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU commit 46ea94ca9cf ("qmp: query-current-machine with
wakeup-suspend-support") added a new QMP command called
'query-current-machine' that retrieves guest parameters that
can vary in the same machine model (e.g. ACPI support for x86 VMs
depends on the '--no-acpi' option). Currently, this API has a single
flag, 'wakeup-suspend-support', that indicates whether the guest has
the capability of waking up from suspended state.
Introduce a libvirt capability that reflects whether qemu has the
monitor command.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to keep @binary around.
virQEMUCapsInitGuestFromBinary() duplicates the string anyway.
1,002 bytes in 36 blocks are definitely lost in loss record 54 of 59
at 0x483579F: malloc (vg_replace_malloc.c:299)
by 0x796B1C7: vasprintf (vasprintf.c:73)
by 0x4C3F2C6: virVasprintfInternal (virstring.c:740)
by 0x4C3F3DC: virAsprintfInternal (virstring.c:761)
by 0x13AFC9: testGetCaps (qemucaps2xmltest.c:105)
by 0x13B200: testQemuCapsXML (qemucaps2xmltest.c:157)
by 0x13B642: virTestRun (testutils.c:174)
by 0x13B366: doCapsTest (qemucaps2xmltest.c:191)
by 0x13FF2B: testQemuCapsIterate (testutilsqemu.c:941)
by 0x13B427: mymain (qemucaps2xmltest.c:215)
by 0x13D706: virTestMain (testutils.c:1096)
by 0x13B489: main (qemucaps2xmltest.c:221)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unit number 7 is kind of special. It's reserved for SCSI
controller. The comment in virDomainSCSIDriveAddressIsUsed()
summarizes that pretty nicely. Libvirt would never generate
such address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.
Only ports in networks with type=bridge use an actual type of 'bridge'.
This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.
This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetDevBandwidthParse method uses the interface type to decide
whether to allow use of the "floor" parameter. Using the interface
type is not convenient as callers may not have that available, but
still wish to allow use of "floor". Switch to an explicit boolean
to control its usage.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After the recent changes, there are only a few places left
where we use the explicit path instead of taking advantage of
the publicly available define; let's get rid of those too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
As evidenced by all existing callers, the only directory it makes
sense to use is TEST_QEMU_CAPS_PATH, so let's just bake that into
the function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
As evidenced by all existing callers, the only directory it makes
sense to use is TEST_QEMU_CAPS_PATH, so let's just bake that into
the function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The value (with a slightly different name) is currently private
to testutilsqemu, but since we use this path all over the place
it makes sense to define it publicly and avoid repetition.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that we can override the post-parse handling, let's update the
testsuite to provide the desired timestamp/name rather than ignoring
the non-deterministic one that was previously being generated. A few
output files need timestamps added now that they are no longer
ignored.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
None of the existing drivers actually use the 0-valued 'nostate'
snapshot state; rather, it was a fluke of implementation. In fact,
some drivers, like qemu, actively reject 'nostate' as invalid during a
snapshot redefine. Normally, a driver computes the state post-parse
from the current domain, and thus virDomainSnapshotGetXMLDesc() will
never expose the state. However, since the testsuite lacks any
associated domain to copy state from, and lacks post-parse processing
that normal drivers have, the testsuite output had several spots with
the state, coupled with a regex filter to ignore the oddity.
It is better to follow the lead of other XML defaults, by not
outputting anything during format if post-parse defaults have not been
applied, and rejecting the default value during parsing. The testsuite
needs a bit of an update, by adding another flag for when to simulate
a post-parse action of setting a snapshot state, but none of the
drivers are impacted other than rejecting XML that was previously
already suspicious in nature.
Similarly, don't expose creation time 0 (for now, only possible if a
user redefined a snapshot to claim creation at the Epoch, but also
happens once setting the creation time is deferred to a post-parse
handler).
This is also a step towards cleaning up snapshot_conf.c to separate
its existing post-parse work (namely, setting the creationTime and
default snapshot name) from the pure parsing work, so that we can get
rid of the testsuite hack of regex filtering of the XML and instead
have more accurate testing of our parser/formatter code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Upcoming changes want to separate out a post-parse massaging of
snapshots separate from parsing the XML, so as not to be dependent on
filtering out an ever-changing timestamp from the testsuite. Along the
way, this means we will want to add yet another conditional to the
snapshot xml2xml tests on whether to perform post-processing steps to
canned values. This will be easier to read if we consolidate all the
decisions into a flags variable, instead of adding yet another
boolean.
While at it, drop the redundant inout test of "noparent" (once is
enough).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vbox and vmx drivers do net case insensitive net model comparisons,
so for example 'VMXNET3' and 'vmxnet3' and 'VmxNeT3' in the XML will
translate to the same driver configuration. To convert these drivers
to use net model enum, we will need to do case insensitive comparisons
as well.
Essentially we implement virEnumToString, but with case insensitive
comparison. XML will always be formatted with the enum model string
we track internally, but we will accept any case insensitive variant.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Demostrate DO_TEST_CAPS_ARCH_LATEST by converting the test case
'aarch64-os-firmware-efi'
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert these test cases to use DO_TEST_CAPS_LATEST
* genid
* genid-auto
This ensures the test infrastructure is working as expected for
a test case with explicit -active and -inactive XML test data
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert these test cases to use DO_TEST_CAPS_LATEST
* os-firmware-bios
* os-firmware-efi
* os-firmware-efi-secboot
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert these test cases to use DO_TEST_CAPS_LATEST
* virtio-transitional
* virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the same pattern that is used in qemuxml2argvtest, setting the
name in a static testQemuInfo instance inside the test macros
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Qemu commit 767abe7 ("chardev: forbid 'wait' option with client
sockets") effectively deprecates usage of "wait" with client sockets
starting with qemu 4.0, and earlier versions ignored the value.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When writing the VMX file from the domain XML, write the firmware key
according to the firmware autoselection. Though, at the moment only
'efi' is supported.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Convert the firmware key to a type of autoselected firmware.
Only the 'efi' firmware is allowed for now, in case the key is present.
It seems VMware (at least ESXi) does not write the key in VMX files when
setting BIOS as firmware.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
When virDBusMessageRead() and virDBusMessageDecode were first added in
commit 834c9c94, they were identical except that virDBusMessageRead()
would unref the message after decoding it.
This difference was eliminated later in commit dc7f3ffc after it
became apparent that unref-ing the message so soon was never the right
thing to do. The two identical functions remained though, with the
tests and virDBus library itself calling the Decode variant, and all
other users calling the Read variant.
This patch eliminates the duplication, switching all users to
virDBusMessageDecode (and moving the nice API documentation comment
from the Read function up to the Decode function).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
My earlier commit be46f61326 was incomplete. It removed caching of
microcode version in the CPU driver, which means the capabilities XML
will see the correct microcode version. But it is also cached in the
QEMU capabilities cache where it is used to detect whether we need to
reprobe QEMU. By missing the second place, the original commit
be46f61326 made the situation even worse since libvirt would report
correct microcode version while still using the old host CPU model
(visible in domain capabilities XML).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds an inline python code for reading MSR features. Since
reading MSRs is a privileged operation, we have to read them from
/dev/cpu/*/msr if it is readable (i.e., the script runs as root) or
fallback to using KVM ioctl which can be done by any user that can start
virtual machines.
The python code is inlined rather than provided in a separate script
because whenever there's an issue with proper detection of CPU features,
we ask the reporter to run cpu-gather.sh script to give us all data we
need to know about the host CPU. Asking them to run several scripts
would likely result in one of them being ignored or forgotten.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parseMapFeature for parsing features from CPU map XML can be easily
generalized to support more feature types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make sure the current CPUID specific code is only applied to CPUID
features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will let us simplify the code since the dictionary keys will match
attribute names in various XMLs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
leaf["eax"] & eax > 0 check works correctly only if there's at most 1
bit set in eax. Luckily that's been always the case, but fixing this
could save us from future surprises.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will have to deal with both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't really need to parse CPU data from QEMU older than 2.9 (i.e.,
before query-cpu-model-expansion) at this point. But even if there's a
need to do so, we can always use an older version of this script to do
the conversion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU 3.1.0 by commit
c7a88b52f62b30c04158eeb07f73e3f72221b6a8
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The latter is deprecated and will be removed soon. The advised
replacement is '-overcommit mem-lock=on|off'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added in QEMU commit of v3.0.0-rc0~48^2~9 (then fixed by
v3.1.0-rc0~119^2~37) QEMU is replacing '-realtime mlock' with
'-overcommit mem-lock'. Add a capability to tell if we're dealing
new new enough qemu to use the replacement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.
Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test the memory locking command line with different QEMU versions
to prepare for changing it for latest QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Test the memory locking command line with different QEMU versions
to prepare for changing it for latest QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make all users of GIC_X use ARG_GIC explicitly, and drop the
required gic parameter from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
No functional change, just replacing the old custom infrastructure
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The qemuxml2xml testInfo is now just a subset of testQemuInfo, so it's
a drop in replacement
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move the capslatest building from qemuxml2argv to testutilsqemu
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In preparation for moving these bits to a shared place, rename them
to match one of the testutilsqemu.c function prefixes. Rename
info->flags handling too as it will need to be moved
testInfoSetPaths isn't renamed because it will stay local
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This moves infile and outfile building outside the test case,
which better fits the pattern of qemuxml2xmltest. It also lets us
drop the qemuxml2argtest-specific 'suffix' from testInfo
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Track infile and outfile in testInfo. This is step towards moving path
creation out of the test case, which will eventually help sharing more
code with qemuxml2xmltest.c
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reuse info->outfile for it. This requires us to set paths before
each virTestRun invocation
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just renamed from existing inName and outActiveName
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These will need to be separate to share testInfo with qemuxml2argv
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Commit 5b9819eedc started using the virFileWrapper APIs in
the test program, and correctly called them only in the section
of code guarded by WITH_QEMU; however, a single call to the
virFileWrapperClearPrefixes() function ended up in the
hypervisor-agnostic section, causing a build failure on MinGW.
Move the call to the QEMU-only section; while at it, also drop
the virFileWrapperRemovePrefix() calls, which are entirely
redundant since we'd drop all prefixes immediately afterwards
anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.
This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:
<enum name='firmware'>
<value>bios</value>
<value>efi</value>
</enum>
We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The point of this API is to fetch all FW descriptors, parse them
and return list of supported interfaces and SMM feature for given
combination of machine type and guest architecture.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'viralloc.h' does not provide any type or macro which would be necessary
in headers. Prevent leakage of the inclusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a constrained CI environment, where it is intentional that attempts
to write outside the current directory will fail, virsh-snapshot was
failing:
@@ -1,2 +1,3 @@
error: invalid argument: parent s3 for snapshot s2 not found
error: marker
+error: Failed to create '/home/travis/.cache/libvirt/virsh': Permission denied
FAIL virsh-snapshot (exit status: 1)
But we've already solved the problem in virsh-uriprecedence: tell
virsh to use XDG locations pointing to somewhere we can write rather
than its default of falling back to $HOME with the test being at risk
of breaking due to the user's environment and/or unacceptably altering
the user's normal cache. Hoist that solution into test-lib.sh, so
that all scripts can use it as needed. While at it, fix a latent typo
where XDG_RUNTIME_HOME was set to a literal relative directory name
"XDG_CACHE_HOME" (the typo did not affect virsh-uriprecedence, but
could matter to other clients).
Fixes: 280a2b41
Fixes: 398de147
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are a few differences, but the one we're interested in is
that PCIe Root Ports are finally available: as a result of this,
our riscv64-virt-headless guest will switch from virtio-mmio to
virtio-pci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1693066
Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current location looks very arbitrary. Move it to the end of
the mymain() function so it is less confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are three test XMLs that have useless spaces at the
beginning of each line. I intend to add these to qemuxml2xmltest
and make xmlout a symlink to the original XML. In order to do
that the XMLs must look better than they do now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also switch the expected output of DO_TEST_PARSE_FILE to be
in a file, now that we demonstrated the input files match
the expected string representation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce a new macro DO_TEST_PARSE_FILE which takes the input JSON
from a file instead of a C string.
This lets us get rid of quote escaping and makes the JSON easier to
edit.
The output JSON is still taken from a string and will be moved
separately.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Instead of using JSON in C strings, put it in separate files
for easier manipulation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Quite a few of the tests have a need to mock the stat() / lstat()
functions and they are taking somewhat different & inconsistent
approaches none of which are actually fully correct. This is shown
by fact that 'make check' fails on 32-bit hosts. Investigation
revealed that the code was calling into the native C library impl,
not getting intercepted by our mocks.
The POSIX stat() function might resolve to any number of different
symbols in the C library.
The may be an additional stat64() function exposed by the headers
too.
On 64-bit hosts the stat & stat64 functions are identical, always
refering to the 64-bit ABI.
On 32-bit hosts they refer to the 32-bit & 64-bit ABIs respectively.
Libvirt uses _FILE_OFFSET_BITS=64 on 32-bit hosts, which causes the
C library to transparently rewrite stat() calls to be stat64() calls.
Libvirt will never see the 32-bit ABI from the traditional stat()
call. We cannot assume this rewriting is done using a macro. It might
be, but on GLibC it is done with a magic __asm__ statement to apply
the rewrite at link time instead of at preprocessing.
In GLibC there may be two additional functions exposed by the headers,
__xstat() and __xstat64(). When these exist, stat() and stat64() are
transparently rewritten to call __xstat() and __xstat64() respectively.
The former symbols will not actally exist in the library at all, only
the header. The leading "__" indicates the symbols are a private impl
detail of the C library that applications should not care about.
Unfortunately, because we are trying to mock replace the C library,
we need to know about this internal impl detail.
With all this in mind the list of functions we have to mock will depend
on several factors
- If _FILE_OFFSET_BITS is set, then we are on a 32-bit host, and we
only need to mock stat64 and __xstat64. The other stat / __xstat
functions exist, but we'll never call them so they can be ignored
for mocking.
- If _FILE_OFFSET_BITS is not set, then we are on a 64-bit host and
we should mock stat, stat64, __xstat & __xstat64. Either may be
called by app code.
- If __xstat & __xstat64 exist, then stat & stat64 will not exist
as symbols in the library, so the latter should not be mocked.
The same all applies to lstat()
These rules are complex enough that we don't want to duplicate them
across every mock file, so this centralizes all the logic in a helper
file virmockstathelper.c that should be #included when needed. The
code merely need to provide a filename rewriting callback called
virMockStatRedirect(). Optionally VIR_MOCK_STAT_HOOK can be defined
as a macro if further processing is needed inline.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use size_t for all sizes. The '*' modifier unfortunately does require an
int so a temporary variable is necessary in the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This was meant to stop abusing the members directly, but we don't do
this for other internal structs. Additionally this did not stop the
test from touching the members. Remove the header obscurization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-snapshot-sync' is present in QEMU since v0.14.0-rc0 and
'transaction' since v1.1.0 (52e7c241ac766406f05fa)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.
This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDiskSourceParse was now just a thin wrapper without any extra
value. Replace all usage of it by the function it calls and remove the
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When adding <migrationSource> I've used a slightly unusual approach. To
allow using the disk source XML parser and formatter convert
<migrationSource> to look like <disk>. This means that <source> will be
added as a subelement of <migrationSource> rather than being formatted
inline.
Conversion from the old format in the parser is very simple as it
involves only moving the XPath context current node slightly if the new
format is found.
The status XML to XML test shows that the upgrade is done correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming change will modify some aspects. To allow testing upgrade path
add a separate output file so that we can see the conversion from old to
new config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming change will modify some aspects. To allow testing upgrade path
add another disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block job related data will be stored in a has table and formatted into
the status XML. Use the mock to guarantee stable tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The layout of my home directory is somewhat peculiar: I store
all git repositories in ~/src/upstream, but since I spend
almost all of my time hacking on libvirt, I also have a
convenience symlink ~/src/libvirt -> ~/src/upstream/libvirt
that I use to access that specific git repository.
The above setup has served me well for years; however, ever
since commit ca1471622d dropped our own custom definitions
for abs_{,top_}{src,build}dir and started using the ones
provided by autotools, virstoragetest has started reliably
failing with errors such as
2) Storage backing chain 2 ...
Offset 0
Expect [chain member: 0
path:/home/abologna/src/upstream/libvirt/tests/virstoragedata/raw
backingStoreRaw: <null>
capacity: 0
encryption: 0
relPath:<null>
type:1
format:1
protocol:none
hostname:<null>
]
Actual [chain member: 0
path:/home/abologna/src/libvirt/tests/virstoragedata/raw
backingStoreRaw: <null>
capacity: 0
encryption: 0
relPath:<null>
type:1
format:1
protocol:none
hostname:<null>
]
... FAILED
Using abolute paths instead of canonical ones in the tests makes
the problem go away.
Note that all tests that are specifically designed to test path
canonicalization via TEST_PATH_CANONICALIZE() were passing even
before this patch and are not touched by it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in fdf6c89ee7, this dependency looks weird. It was
needed because of the way that while() loop was written - it
fetches next argument in every iteration. Therefore, our only
option was for ARG_END to have the same value as QEMU_CAPS_LAST.
This also meant that QEMU_CAPS_* could have been only at the end
of the __VA_ARGS__.
This commit reworks the while() loop and removes the dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is one specific caller (testInfoSetArgs() in
qemuxml2argvtest.c) which expect the va_list argument to change
after returning from the virQEMUCapsSetVAList() function.
However, since we are passing plain va_list this is not
guaranteed. The man page of stdarg(3) says:
If ap is passed to a function that uses va_arg(ap,type), then
the value of ap is undefined after the return of that function.
(ap is a variable of type va_list)
I've seen this in action in fact: on i686 the qemuxml2argvtest
fails on the second test case because testInfoSetArgs() sees
ARG_QEMU_CAPS and calls virQEMUCapsSetVAList to process the
capabilities (in this case there's just one
QEMU_CAPS_SECCOMP_BLACKLIST). But since the changes are not
reflected in the caller, in the next iteration testInfoSetArgs()
sees the QEMU capability and not ARG_END.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The mock fopen() function will abort if "/proc/mounts" is
requested with "r" permissions and VIR_CGROUP_MOCK_FILENAME
env var is not set.
Unfortunately this is triggering by the libselinux library
constructor when it tries to read /proc/mounts to find out
if selinuxfs is mounted in an unusual place.
This, however, only affects libselinux in Debian as that
opens with "r", while in Fedora / RHEL it opens "re" and
thus luckily never triggered the abort(), instead getting
an EACCESS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If qemuFirmwareFetchConfigs() returned more or fewer paths than
expected all that we see is the following error message:
Expected 5 paths, got 7
While it is technically correct (the best kind of correct), we
can do better:
Unexpected path (i=0). Expected /some/path got /some/other/path
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The individual qemuDomainDetach*Device() functions will soon be "less
functional", since some of the code that is duplicated in 10 of the 12
detach functions is going to be moved into the common
qemuDomainDetachDeviceLive(), which calls them all.
qemuhotplugtest.c is the only place any of these individual functions
is called other than qemuDomainDetachDeviceLive() itself. Fortunately,
qemuDomainDetachDeviceLive() provides exactly the functionality needed
by the test driver (except that it supports detach of more device
types than the test driver has tests for).
This patch replaces the calls to
qemuDomainDetach(Chr|Shmen|Watchdog|Disk)Device with a single call to
the higher level function, allowing us to shift functionality between
the lower level functions without breaking the tests.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As the previous commit mentioned, argv mode (such as when you feed
virsh via stdin with <<\EOF instead of via a single shell argument)
didn't permit comments. Do this by treating any command name token
that starts with # as a comment which silently eats all remaining
arguments to the next newline or semicolon.
Note that batch mode recognizes unquoted # at the start of any word as
a command as part of the tokenizer, while this patch only treats # at
the start of the command word as a comment (any other # remaining by
the time vshCommandParse() is processing things was already quoted
during the tokenzier, and as such was probably intended as the actual
argument to the command word earlier in the line).
Now I can do something like:
$ virsh -c test:///default <<EOF
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
EOF
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Continuing from what I did in commit 4817dec0, now I want to write a
sequence that is self-documenting. So I need comments :)
Now I can do something like:
$ virsh -c test:///default '
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
'
Note that this does NOT accept comments in argv mode, another patch
will tackle that.
(If I'm not careful, I might turn virsh into a full-fledged 'sh'
replacement? Here's hoping I don't go that far...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Base macro to unify the actual testCompareXMLToArgv test calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* ARG_CAPS_ARCH must be specified with ARG_CAPS_VER
* ARG_QEMU_CAPS shouldn't be specified with ARG_CAPS_*
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move DO_CAPS_TEST* qemuCaps init and all the associated setup
into testInfoSetArgs, adding ARG_CAPS_ARCH and ARG_CAPS_VER
options and using those to build the capsfile path locally
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have tests for simple guests with graphics for basically
all other architectures, so it makes sense to include s390x
too.
The input file was generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks, using a version of virt-manager
that includes commit 7b9de27a990f.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As of commit db6c7070e25a, virt-manager will default to using
virtio-blk rather than virtio-scsi for aarch64/virt guests,
bringing them in line with other architectures. Update our test
case to reflect this change.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Commit 3bd4ed46 introduced this element as required which
breaks backcompat for test driver. Let's make the element optional.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move DO_TEST* qemuCaps init into testInfoSetArgs. This is a step
towards unifying the different test macro implementations
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is closer to the pattern of qemuxml2xml tests, and will make
things easier if we extend testInfo to contain more freeable data
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rather than make callers do it. The operative info is just arch
and ver which we are passing in already.
Fold in stripmachinealiases too since it is just dependent on
ver value
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
They are potentially useful at the moment, but we will be making
things much more flexible
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop parseFlags from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop migrateFrom and migrateFd from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop stub GIC values from DO_TEST_FULL calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is necessary before we can start adding more optional parameter
implementations to DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This establishes a pattern that will allow us to make test macros
more general purpose, by taking optional arguments. The general
format will be:
DO_TEST_FULL(...
ARG_FOO, <value1>,
ARG_BAR, <value2>)
ARG_X are just enum values that we look for in the va_args and know
how to interpret.
Implement this for the existing implicit qemuCaps va_args
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For now it just fills in the qemuCaps list. We will expand it
in future patches
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:
<pool>
...
<refresh>
<volume allocation='capacity'/>
</refresh>
...
</pool>
This is useful for certain backends where computing the actual allocation
of a volume might be an expensive operation.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Change domcaps to skip formatting XML if the default
TRISTATE_BOOL_ABSENT is found. Now when domcaps is extended, driver
XML output won't change until an explicit TRISTATE_BOOL value is set
in driver code.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'full' test verifies the output of a virDomainCapsPtr built
by hand. It has the following problems:
The domcaps test suite nowadays has 3 hypervisor driver implementations
which should give us plenty of opportunity to get full domcaps coverage.
I don't think this test has much value. And it has the following issues:
- Requires manual intervention to test new domcaps XML, which is easy
to miss, for example gic bits aren't covered there.
- The SET_ALL_BITS trick it uses to fill in enums will output
values that are never reported by any driver implementation
(strings like 'default')
Let's remove it
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'empty' demonstrates XML generated when only bare minimum caps
data has been filled in. This will demonstrate changes that alter
the default XML output.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We already document how to generate them, so might as well
go the extra mile and document the remaining steps.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This info can be useful to filter devices visible
to mgmt clients so that they won't see devices that
unsafe/not meaningful to pass thru.
Provide class info the way it is provided by udev or
kernel that is as single 6-digit hexadecimal.
Class element is not optional. I guess this should not
break users that use virNodeDeviceCreateXML because
they probably specify only scsi_host capability on
input and then node device driver gets other capabilities
from udev after device appeared.
HAL driver does not get support for the new element in
this patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.
Let's just use "klass" as field name instead of _class or class
and add syntax rule.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This code snippet has clearly been cargo-culted, and all its
instances can be safely dropped seeing as 1) a much better
way to handle the scenario in C programs would be to pass the
value via the preprocessor, and 2) the value is actually not
used anywhere after being defined.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
TEST_DRIVER_DIR is defined as "$(top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search (the
absolute version of) that directory automatically, which means
passing it through the environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's no longer used as of commit a9694a8e18.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add support in the domXML<->native config converter for
max_grant_frames. Include a test for the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting max_grant_frames in libxl domain config
object and include a test to check that it is properly converted
from XML to libxl domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All Xen domains have a xenbus device. Implicitly add one if not
already explicitly specified in the domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is mostly to avoid a memleak that is not a true memleak
anyway - prefixes will be freed by kernel upon test exit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In theory, it's nice to have virFileWrapperAddPrefix() return a
value that indicates if the function succeeded or not. But in
practice, nobody checks for that and in fact blindly believes
that the function succeeded. Therefore, make the function return
nothing and just abort() if it would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With only a couple minor tweaks, we can make the existing
doCapsTest() functions with testQemuCapsIterate() and finally
remove the need to manually adjust the test programs every time
a new input file is introduced; moreover, this means that the
two lists can't possibly get out of sync anymore.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This function iterates over a directory containing
capabilities-related data, extract some useful bits of
information from the file name, and calls a user-provided
callback.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We're not using any of the functionality offered by the
module at the moment, but we will in just a second.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This removes the awkard escaping and will allow us to perform
some more refactoring later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We're using static string concatenation at the moment, but
that will no longer be a possibility in a bit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This removes a little duplication right away, and will allow
us to avoid introducing more later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This is not particularly useful right now, but will allow us
to refactor some functionality later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
These functions don't do anything too interesting right now,
but will be extended later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1564270
Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.
At the same time, introduce bunch of tests to test the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test firmware description parsing so far.
The test files come from three locations:
1) ovmf-sb-keys.json and ovmf-sb.json come from OVMF
package from RHEL-7 (with slight name change to reflect their
features in filename too),
2) bios.json and aavmf.json come from example JSON documents from
firmware.json from qemu's git (3a0adfc9bf),
3) ovmf.json is then copied from ovmf-sb.json and stripped
of SECURE_BOOT and REQUIRES_SMM flags, OVMF path change,
description update and machine type expanded for both pc and q35
machine types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This is going to extend virDomainLoader enum. The reason is that
once loader path is NULL its type makes no sense. However, since
value of zero corresponds to VIR_DOMAIN_LOADER_TYPE_ROM the
following XML would be produced:
<os>
<loader type='rom'/>
...
</os>
To solve this, introduce VIR_DOMAIN_LOADER_TYPE_NONE which would
correspond to value of zero and then use post parse callback to
set the default loader type to 'rom' if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In qemuxml2xmltest, both activeVcpus and blockjobs members
of the testInfo struct have been entirely unused ever since
commit d1a7fc8bb3.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
So far we are providing the suppressions file with a relative
path to valgrind. This apparently doesn't work on some distros
like Ubuntu and its derivates. Providing the absolute path fixes
the problem.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The existing behavior for ppc64 guests is to always add a USB
keyboard and mouse combo if graphics are present; unfortunately,
this means any attempt to use a USB tablet will cause both pointing
devices to show up in the guest, which in turn will result in poor
user experience.
We can't just stop adding the USB mouse or start adding a USB tablet
instead, because existing applications and users might rely on the
current behavior; however, we can avoid adding the USB mouse if a USB
tablet is already present, thus allowing users and applications to
create guests that contain a single pointing device.
https://bugzilla.redhat.com/show_bug.cgi?id=1683681
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These are similar to the existing simple headless guests, but
also include a graphical output and some input devices.
Input files were generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While the parser and schema have to accept all possible models,
virtio-(non-)transitional models are only applicable to
type=passthrough and should be otherwise rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we pass XML to virDomainDefineXML API with these two elements:
...
<title></title>
<description></description>
...
libvirt correctly ignores these two elements and they will not appear
in the parsed XML.
However, if we use virDomainSetMetadata API and with "" as value for
title or description we will end up with the parsed XML that contains
these empty elements.
Let's fix the behavior of this API to behave the same as
virDomainDefineXML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1518042
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element. It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing. Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags. We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
While this function is not, strictly speaking, a predicate,
it still mostly behaves like one as evidenced by the vast
majority of its callers, so using bool rather than int as
the return type makes sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It may happen that both symbols are present. Especially when
chaining mocks. For instance if a test is using virpcimock and
then both stat and __xstat would be present in the address space
as virpcimock implements both. Then, if the test would try to use
say virfilewrapper (which again uses VIR_MOCK_REAL_INIT_ALT() to
init real_stat and real___xstat) it would find stat() from
virpcimock and stop there. The virfilewrapper.c:real___xstat
wouldn't be initialized and thus it may result in a segfault.
The reason for segfault is that sys/stat.h may redefine stat() to
call __xstat().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Capabilities should not duplicate data that are obvious from our
documentation and will not change with different QEMU binaries
or the way how we compile libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When dealing with internal paths we don't need to worry about
whether or not suffixes are lowercase since we have full control
over them, which means we can avoid performing case-insensitive
string comparisons.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Add a new test for the storage pool capabilities. There will be
one test mocked with every backend available (full) and one where
only the file system pool is available.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Define a schema for the storage pool capabilities along with
a test to show the general format.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The sheepdog pool is documented as not using the volume type,
so let's just remove it. Besides it would have produced bad
results since the defaultType is FILE but the formatting used
the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If none of the 'capabilities' features are enabled we'd still format the
opening and closing tag for the <capabilities element.
The implementation is suboptimal but will be refactored for a better
approach. This is done prior to the refactor to show that tests are not
impacted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as
Skylake-Client.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as a different
CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The signature computation code is not too complicated and it will likely
never change so testing it is not very important. We do it mostly for a
nice side effect of easily accessible signature numbers for all CPU
data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
