There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Problem with VIR_FREE() is that we are not linking
libvirt-utils.so to our mock libs therefore there will be an
unresolved symbol. Fortunately, nsstest that eventually links
with the nssmock links also with libvirt-utils.so and thus the
symbol is resolved after all. However, if one wants to run the
test binary under valgrind it is impossible to do so. Because of
the unresolved symbol.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In dd7bfb2cdc I've removed locking of the network driver upon
it's allocation. However, I forgot to remove one location of the
driver unlock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have multiple bool values, create a single enum with bits
representing what fields are set. Fields are generally set in groups
of 3 (read, write, total).
Currently we build the JSON object for the "block_set_io_throttle"
command using the knowledge that a NULL for a support*Options boolean
would essentially ignore the rest of the arguments.
This may not work properly if some capability was backported, plus it just
looks rather ugly. So instead, build the "base" arguments and then if
the support*Option bool capability is set, add in the arguments on the fly.
Then append those arguments to the basic command and send to qemu.
Rather than using negative logic and setting the maxparams to a lesser
value based on which capabilities exist, alter the logic to modify the
maxparams based on a base value plus the found capabilities. Reduces the
chance that some backported feature produces an incorrect value.
These features are included:
AVX512DQ, AVX512IFMA, AVX512BW, AVX512VL, AVX512VBMI, AVX512_4VNNIW and
AVX512_4FMAPS.
qemu commits: cc728d14 and 95ea69fb
Signed-off-by: Lin Ma <lma@suse.com>
Commit id '03e750f3' added support for checking the PLOOP type; however,
it used 'target.type' which no storage code ever fills in, so it will
never be set. Change to just vol->type (could use vol->target.format
as well).
Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add a global check for duplicate drive addresses. This will fix the
problem of duplicate disk and hostdev drive addresses.
Example for duplicate drive addresses:
<disk>
...
<target name='sda'/>
</disk>
<disk>
...
<target name='sdb'/>
<address type='drive' controller=0 bus=0 target=0 unit=0/>
</disk>
Another example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
...
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
...
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
Unfortunately the fixes (1b08cc170a,
8d46386bfe) weren't enough to catch these
cases and it isn't possible to add additional checks in
virDomainDeviceDefPostParseInternal() for SCSI hostdevs or
virDomainDiskDefAssignAddress() for SCSI/IDE/FDC/SATA disks without
adding another parse flag (virDomainDefParseFlags) to disable this
validation while updating or detaching a disk or hostdev.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Comparing the parameter 'type' against the member 'bus' instead of
against the member 'type' is quite confusing. Rename the parameter
'type' to 'bus_type' to clarify its meaning.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Pass the virDomainDeviceDriveAddress as a struct instead of individual
arguments. Reworked the function descriptions.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Two reasons:
1.in none hotplug, we will pass it. We can see from libvirt function
qemuBuildVhostuserCommandLine
2.qemu will use this vetcor num to init msix table. If we don't pass, qemu
will use default value, this will cause VM can only use default value
interrupts at most.
Signed-off-by: gaohaifeng <gaohaifeng.gao@huawei.com>
Consider the following XML snippets:
$ cat scsicontroller.xml
<controller type='scsi' model='virtio-scsi' index='0'/>
$ cat scsihostdev.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='8' unit='1074151456'/>
</source>
</hostdev>
If we create a guest that includes the contents of scsihostdev.xml,
but forget the virtio-scsi controller described in scsicontroller.xml,
one is silently created for us. The same holds true when attaching
a hostdev before the matching virtio-scsi controller.
(See qemuDomainFindOrCreateSCSIDiskController for context.)
Detaching the hostdev, followed by the controller, works well and the
guest behaves appropriately.
If we detach the virtio-scsi controller device first, any associated
hostdevs are detached for us by the underlying virtio-scsi code (this
is fine, since the connection is broken). But all is not well, as the
guest is unable to receive new virtio-scsi devices (the attach commands
succeed, but devices never appear within the guest), nor even be
shutdown, after this point.
While this is not libvirt's problem, we can prevent falling into this
scenario by checking if a controller is being used by any hostdev
devices. The same is already done for disk elements today.
Applying this patch and then using the XML snippets from earlier:
$ virsh detach-device guest_01 scsicontroller.xml
error: Failed to detach device from scsicontroller.xml
error: operation failed: device cannot be detached: device is busy
$ virsh detach-device guest_01 scsihostdev.xml
Device detached successfully
$ virsh detach-device guest_01 scsicontroller.xml
Device detached successfully
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Although nearly all host devices that are assigned to guests using
VFIO ("<hostdev>" devices in libvirt) are physically PCI Express
devices, until now libvirt's PCI address assignment has always
assigned them addresses on legacy PCI controllers in the guest, even
if the guest's machinetype has a PCIe root bus (e.g. q35 and
aarch64/virt).
This patch tries to assign them to an address on a PCIe controller
instead, when appropriate. First we do some preliminary checks that
might allow setting the flags without doing any extra work, and if
those conditions aren't met (and if libvirt is running privileged so
that it has proper permissions), we perform the (relatively) time
consuming task of reading the device's PCI config to see if it is an
Express device. If this is successful, the connect flags are set based
on the result, but if we aren't able to read the PCI config (most
likely due to the device not being present on the system at the time
of the check) we assume it is (or will be) an Express device, since
that is almost always the case anyway.
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.
In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
The path to the config file for a PCI device is conventiently stored
in a virPCIDevice object, but that object's contents aren't directly
visible outside of virpci.c, so we need to have an accessor function
for it if anyone needs to look at it.
This new function just calls fstat() (if provided with a valid fd) or
stat() (if fd is -1) and returns st_size (or -1 if there is an
error). We may decide we want this function to be more complex, and
handle things like block devices - this is a placeholder (that works)
for any more complicated function.
Adding first build of year minor number reset to 0.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We can't change feature names for compatibility reasons even if they
contain typos or other software uses different names for the same
features. By adding alternative spellings in our CPU map we at least
allow anyone to grep for them and find the correct libvirt's name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When virt-aa-helper parses xml content it can fail on security labels.
It fails by requiring to parse active domain content on seclabels that
are not yet filled in.
Testcase with virt-aa-helper on a minimal xml:
$ cat << EOF > /tmp/test.xml
<domain type='kvm'>
<name>test-seclabel</name>
<uuid>12345678-9abc-def1-2345-6789abcdef00</uuid>
<memory unit='KiB'>1</memory>
<os><type arch='x86_64'>hvm</type></os>
<seclabel type='dynamic' model='apparmor' relabel='yes'/>
<seclabel type='dynamic' model='dac' relabel='yes'/>
</domain>
EOF
$ /usr/lib/libvirt/virt-aa-helper -d -r -p 0 \
-u libvirt-12345678-9abc-def1-2345-6789abcdef00 < /tmp/test.xml
Current Result:
virt-aa-helper: error: could not parse XML
virt-aa-helper: error: could not get VM definition
Expected Result is a valid apparmor profile
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Only the latest APIs are fully documented and the documentation of the
older variants (which are just limited versions of the new APIs anyway)
points to the newest APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When trying to install libvirtd from sources I've noticed the
following failure:
/usr/bin/install: cannot stat 'virt-guest-shutdown.target': No such file or directory
Makefile:2792: recipe for target 'install-init-systemd' failed
make[3]: *** [install-init-systemd] Error 1
make[3]: *** Waiting for unfinished jobs....
The problem is that while other files around that location in
Makefile are firstly generated into the builddir and only after
that installed, virt-guest-shutdown.target file is not generated
at all and should be installed from the srcdir.
This was introduced in 01079727.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Restarting libvirtd on the source host at the end of migration when a
domain is already running on the destination would cause image labels to
be reset effectively killing the domain. Commit e8d0166e1d fixed similar
issue on the destination host, but kept the source always resetting the
labels, which was mostly correct except for the specific case handled by
this patch.
https://bugzilla.redhat.com/show_bug.cgi?id=1343858
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
