Commit Graph

484 Commits

Author SHA1 Message Date
Shalini Chellathurai Saroja
09364608b4 node_device: refactor address retrieval of node device
Use switch statements instead of if-else condition in the method
nodeDeviceFindAddressByName to retrieve address of a node device.

Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-12-09 14:03:05 +01:00
Shalini Chellathurai Saroja
2f984adf2d nodedev: detect AP matrix device
Add support for AP matrix device in libvirt node device driver.

https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#the-design

Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-12-09 14:03:05 +01:00
Shalini Chellathurai Saroja
0415611fe0 nodedev: detect AP queues
Each AP card device can support upto 256 AP queues.  AP queues are
also detected by udev, so add support for libvirt nodedev driver.

https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-12-09 14:03:05 +01:00
Shalini Chellathurai Saroja
7a2b898895 nodedev: detect AP card device
Introduce support for the Adjunct Processor (AP) crypto card device.
Udev already detects the device, so add support for libvirt nodedev
driver.

https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-12-09 14:03:05 +01:00
Daniel P. Berrangé
3fba30fc82 nodedev: report errors about missing integer properties
The helper methods for getting integer properties ignore a missing
property setting its value to zero. This lack of error reporting
resulted in missing the regression handling hotplug of USB devices
with the vendor and model IDs getting set to zero silently.

The few callers which relied on this silent defaulting have been fixed,
so now we can report fatal errors immediately.

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-17 16:55:07 +00:00
Daniel P. Berrangé
b3a2395313 nodedev: drop DKD_MEDIA_AVAILABLE property check
The access of DKD_MEDIA_AVAILABLE for floppy disks, is mistakenly
protected by a check for ID_CDROM_MEDIA, introduced in:

  commit 10427db779
  Author: Ján Tomko <jtomko@redhat.com>
  Date:   Fri Jun 3 16:10:21 2016 +0200

    Only return two values in udevGetUintProperty

Thus the check of DKD_MEDIA_AVAILABLE never run. In practice this didn't
matter since this property is set by the DeviceKit-Disks daemon which
was only around for 3 Fedora releases before being killed off around
F13. Thus we can just remove this legacy property.

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-17 16:55:04 +00:00
Daniel P. Berrangé
032394856b nodedev: dont rely on ignoring errors on missing properties
The udevProcessStorage method relies on udevGetIntProperty ignoring
errors about non-existant properties and instead setting the value to
zero. In theory when seeing ID_CDROM=1, you might expect that devices
which are not CDs will get ID_CDROM=0, but that's not what happens in
practice. Instead the property simply won't get set at all.

IOW, the code does not need to care about the value of the property,
merely whether it exists or not.

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-17 16:54:57 +00:00
Daniel P. Berrangé
f4b4bfdf41 nodedev: improve debugging logs from udev device/event processing
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-17 16:54:45 +00:00
Michal Privoznik
7e67a136da node_device: Use "udev" monitor source
In v6.3.0-rc1~67 I've made a switch: instead of listening on udev
events the nodedev driver started listening for kernel events.
This was because when a device changes its name (e.g. NICs) we
will get "move" event with DEVPATH_OLD property set, which we can
then use to remove the old device and thus keep our internal list
up to date. The switch to "kernel" source was made because if the
old NICs naming (eth0, eth1, ...) is enabled (e.g. via
net.ifnames=0 on the kernel cmd line) then udev overwrites the
property with the new name making our internal list go out of
sync. Interestingly, when the od NICs naming is not enabled then
the DEVPATH_OLD contains the correct value.

But as it turns out, "kernel" source might be missing some other
important properties, e.g. USB vendor/product IDs. Therefore,
switch back to "udev" source and wish the best of luck to users
using the old NICs naming.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1897625
Fixes: 9a13704818
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-17 14:28:47 +01:00
Boris Fiuczynski
0c841f9b70 node_device: detecting mdev_types capability on CSS devices
Add detection of mdev_types capability to channel subsystem devices.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-11-11 16:56:33 +01:00
Laine Stump
c0ae4919e3 change DIR* int g_autoptr(DIR) where appropriate
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-11-02 22:01:36 -05:00
Laine Stump
13fe8d607d node_device: fix leak of DIR*
Commit 53aec799fa introduced the function udevGetVDPACharDev(),
which scans a directory using virDirOpenIfExists() and
virDirRead(). It unfortunately forgets to close the DIR* when it is
finished with it. This patch fixes that omission.

Fixes: 53aec799fa
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-11-01 20:34:23 -05:00
Jonathon Jongsma
53aec799fa Include vdpa devices in node device list
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.

Example output:

virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0

virsh # nodedev-dumpxml vdpa_vdpa0
<device>
  <name>vdpa_vdpa0</name>
  <path>/sys/devices/vdpa0</path>
  <parent>computer</parent>
  <driver>
    <name>vhost_vdpa</name>
  </driver>
  <capability type='vdpa'>
    <chardev>/dev/vhost-vdpa-0</chardev>
  </capability>
</device>

NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2020-10-26 02:39:29 -04:00
Ján Tomko
83b156e1b7 Revert "Also look for dmi information in /sys/class"
Assume nobody runs current libvirt on kernels such as 2.6.26.

Kernel commit 9f9c9cbb60576a1518d0bf93fb8e499cffccf377 (released
in 3.8) mentions the new path and I believe it was added by:
commit 948af1f0bbc8526448e8cbe3f8d3bf211bdf5181
    firmware: Basic dmi-sysfs support
(released in 2.6.39), but I cannot figure out how all that
kernel automagic works.

This reverts commit 4c81b0fdc5

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-02 13:56:46 +02:00
Ján Tomko
1725d0bfbc node_device: use g_new0 instead of VIR_ALLOC*
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-01 12:34:13 +02:00
Ján Tomko
92047567cf Reduce scope of some variables
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-09-24 11:19:06 +02:00
Marc Hartmayer
cb09344a2c udevProcessCSS: Check if def->driver is non-NULL
Don't process subchannel devices where `def->driver` is not set. This
fixes the following segfault:

Thread 21 "nodedev-init" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x3ffb08fc910 (LWP 64303)]
(gdb) bt
 #0  0x000003fffd1272b4 in __strcmp_vx () at /lib64/libc.so.6
 #1  0x000003ffc260c3a8 in udevProcessCSS (device=0x3ff9018d130, def=0x3ff90194a90)
 #2  0x000003ffc260cb78 in udevGetDeviceDetails (device=0x3ff9018d130, def=0x3ff90194a90)
 #3  0x000003ffc260d126 in udevAddOneDevice (device=0x3ff9018d130)
 #4  0x000003ffc260d414 in udevProcessDeviceListEntry (udev=0x3ffa810d800, list_entry=0x3ff90001990)
 #5  0x000003ffc260d638 in udevEnumerateDevices (udev=0x3ffa810d800)
 #6  0x000003ffc260e08e in nodeStateInitializeEnumerate (opaque=0x3ffa810d800)
 #7  0x000003fffdaa14b6 in virThreadHelper (data=0x3ffa810df00)
 #8  0x000003fffc309ed6 in start_thread ()
 #9  0x000003fffd185e66 in thread_start ()
(gdb) p *def
$2 = {
  name = 0x0,
  sysfs_path = 0x3ff90198e80 "/sys/devices/css0/0.0.ff40",
  parent = 0x0,
  parent_sysfs_path = 0x0,
  parent_wwnn = 0x0,
  parent_wwpn = 0x0,
  parent_fabric_wwn = 0x0,
  driver = 0x0,
  devnode = 0x0,
  devlinks = 0x3ff90194670,
  caps = 0x3ff90194380
}

Fixes: 05e6cdafa6 ("node_device: detect CSS devices")
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
2020-09-22 10:57:06 +02:00
Pavel Hrdina
de3289e2b5 remove HAL node device driver
There was one attempt a year ago done by me to drop HAL [1] but it was
never resolved. There was another time when Dan suggested to drop HAL
driver [2] but it was decided to keep it around in case device
assignment will be implemented for FreeBSD and the fact that
virt-manager uses node device driver [3].

I checked git history and code and it doesn't look like bhyve supports
device assignment so from that POV it should not block removing HAL.

The argument about virt-manager is not strong as well because libvirt
installed from FreeBSD packages doesn't have HAL support so it will not
affect these users as well [4].

The only users affected by this change would be the ones compiling
libvirt from GIT on FreeBSD.

I looked into alternatives and there is libudev-devd package on FreeBSD
but unfortunately it doesn't work as it doesn't list any devices when
used with libvirt. It provides libudev APIs using devd.

I also looked into devd directly and it provides some APIs but there are
no APIs for device monitoring and events so that would have to be
somehow done by libvirt.

Main motivation for dropping HAL support is to replace libdbus with GLib
dbus implementation and it cannot be done with HAL driver present in
libvirt because HAL APIs heavily depends on symbols provided by libdbus.

[1] <https://www.redhat.com/archives/libvir-list/2019-May/msg00203.html>
[2] <https://www.redhat.com/archives/libvir-list/2016-April/msg00992.html>
[3] <https://www.redhat.com/archives/libvir-list/2016-April/msg00994.html>
[4] <https://svnweb.freebsd.org/ports/head/devel/libvirt/Makefile?view=markup>

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-17 18:19:26 +02:00
Boris Fiuczynski
9e7aa1c012 node_device: mdev vfio-ccw support
Allow vfio-ccw mdev devices to be created besides vfio-pci mdev devices
as well.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
2020-09-15 09:06:32 +02:00
Boris Fiuczynski
33bbf589dd node_device: detect DASD devices
Make Direct Access Storage Devices (DASDs) available in the node_device driver.

Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
2020-09-15 09:06:30 +02:00
Boris Fiuczynski
05e6cdafa6 node_device: detect CSS devices
Make channel subsystem (CSS) devices available in the node_device driver.
The CCS devices reside in the computer system and provide CCW devices, e.g.:

  +- css_0_0_003a
      |
      +- ccw_0_0_1a2b
          |
          +- scsi_host0
              |
              +- scsi_target0_0_0
                  |
                  +- scsi_0_0_0_0

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
2020-09-15 09:06:15 +02:00
Boris Fiuczynski
0e7f8bb6c1 node_device: refactor udevProcessCCW
Refactor out CCW address parsing for later reuse.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
2020-09-15 09:06:13 +02:00
Pavel Hrdina
dc6a76f32e meson: src: add check-aclrules test
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
adf59b27a2 meson: src: add check-driverimpls test
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
3d1bd8e8bb meson: src: install libvirt daemon sysconf files
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
25ab77a197 meson: src: generate openrc init files
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
dd4f2c73ad meson: src: generate systemd unit files for libvirt daemons
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
5740e1789e meson: src: generate libvirt daemon conf and augeas files
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
5b6047945c meson: src: build virtnodedevd daemon binary
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:05 +02:00
Pavel Hrdina
b6b45f0b99 meson: src: build libvirt_driver_nodedev.so shared module
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:04 +02:00
Pavel Hrdina
edc8662daf meson: src: build libvirt_driver_nodedev_impl.a static library
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:04 +02:00
Pavel Hrdina
b63c979fc9 meson: remove automake specific directives
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.

The remaining ones are not converted to meson files as they are
automatically tracked by meson.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:26:25 +02:00
Fangge Jin
500810f3c5 src: fix word spell typos
Signed-off-by: Fangge Jin <fjin@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-07-09 10:01:41 +02:00
Laine Stump
f7e3610095 use g_auto() for all remaining non-g_auto() virBuffers
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-07-08 16:34:52 -04:00
Daniel P. Berrangé
90a10912e2 nodedev: remove use of the term 'blacklist' from enumeration code
The term "ignored" is a better choice for the filtering performed
on devices from udev.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-26 15:39:33 +01:00
Erik Skultety
69a9b021a8 nodedev: Makefile: Use AM_LDFLAGS_MOD_NOUNDEF with the installed library
Rather than using the AM_LDFLAGS_MOD_NOUNDEF options with the noinstall
library that will come out of libtool from
libvirt_driver_nodedev_impl_la, use it with the installed version
libvirt_driver_nodedev_la.

Broken-by-commit: c44bffb9
Fixes: https://ci.centos.org/job/libvirt-rpm/systems=libvirt-fedora-32/1155/

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-19 16:09:59 +02:00
Jonathon Jongsma
88043da227 nodedev: add mdev support to virNodeDeviceDestroy()
Add the ability to destroy mdev node devices via the mdevctl utility.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:55 +02:00
Jonathon Jongsma
c44bffb9af nodedev: Build a non-loadable driver lib
In order to test the nodedev driver, we need to link against a
non-loadable module. Similar to other loadable modules already in the
repository, create an _impl library that can be linked against the unit
tests and then create a loadable module from that.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:55 +02:00
Jonathon Jongsma
9691440ecb nodedev: add mdev support to virNodeDeviceCreateXML()
With recent additions to the node device xml schema, an xml schema can
now describe a mdev device sufficiently for libvirt to create and start
the device using the mdevctl utility.

Note that some of the the configuration for a mediated device must be
passed to mdevctl as a JSON-formatted file. In order to avoid creating
and cleaning up temporary files, the JSON is instead fed to stdin and we
pass the filename /dev/stdin to mdevctl. While this may not be portable,
neither are mediated devices, so I don't believe it should cause any
problems.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:55 +02:00
Jonathon Jongsma
4583a73470 nodedev: store mdev UUID in mdev caps
In order to allow libvirt to create and start new mediated devices, we
need to be able to verify that the device has been started. In order to
do this, we'll need to save the UUID of newly-discovered devices within
the virNodeDevCapMdev structure. This allows us to search the device
list by UUID and verify whether the expected device has been started.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:55 +02:00
Jonathon Jongsma
81dc248ea4 nodedev: refactor nodeDeviceFindNewDevice()
In preparation for creating mediated devices in libvirt, we will need to
wait for new mediated devices to be created as well. Refactor
nodeDeviceFindNewDevice() so that we can re-use the main logic from this
function to wait for different device types by passing a different
'find' function.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:54 +02:00
Jonathon Jongsma
37ab63a6fc nodedev: factor out nodeDeviceHasCapability()
Currently nodeDeviceCreateXML() and nodeDeviceDestroy() only support
NPIV HBAs, but we want to be able to create mdev devices as well. This
is a first step to enabling that support.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:54 +02:00
Michal Privoznik
9a13704818 udevHandleOneDevice: Remove old instance of device on "move"
When a device is "move"-d (this basically means it was renamed),
we add the new device onto our list but keep the old there too.
Fortunately, udev sets this DEVPATH_OLD property which points to
the old device path. We can use it to remove the old instance.

To test this try renaming an interface, for instance:

  # ip link set tunl0 name tunl1
  # ip link set tunl1 name tunl0

One problem with udev is that it sends old ifname in INTERFACE
property, which creates a problem for us, the property is where
we get the ifname from and use it then to query all kind of info
about the interface. Well, if it is non-existent then we can't
query anything. This happens if ifname rename is suppressed
(net.ifnames=0 on kernel cmd line for instance). Fortunately, we
can use "kernel" source for udev events which has always the
fresh info.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-04-22 12:51:15 +02:00
Michal Privoznik
bfa8cf4b29 node_device_udev: Split udevRemoveOneDevice() into two
Move internals of udevRemoveOneDevice() into a separate function
which accepts sysfs path as an argument and actually removes the
device from the internal list. It will be reused later.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-04-22 12:51:15 +02:00
Michal Privoznik
4c1033a151 udevRemoveOneDevice: Unlock node device obj upon return
When removing a node device object from the internal list the
udevRemoveOneDevice() function does plain unref over the object.
This is not sufficient. If there is another thread that's waiting
for the object lock it will wait forever.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-04-22 12:51:15 +02:00
Mark Asselstine
abbd3a3184 node_device_udev: handle move events
It is possible and common to rename some devices, this is especially
true for ethernet devices such as veth pairs.

In the udevEventHandleThread() we will be notified of this change but
currently we only process "add", "change" and "remove"
events. Renaming a device such as above results in a "move" event, not
a "remove" followed by and "add" or vise versa. This change will add
the new/destination device to our records but unfortunately there is
no usable mechanism to identify the old/source device to remove it
from the records. So this is admittedly only a partial fix.

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-20 15:25:52 +02:00
Andrea Bolognani
ef0fa8395f systemd: Move timeout from service files to sysconf files
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-04-03 11:50:50 +02:00
Andrea Bolognani
93c13f0d93 systemd: Add sysconf files for all daemons
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-04-03 11:50:47 +02:00
Daniel P. Berrangé
008abeb03c nodedev: fix race in API usage vs initial device enumeration
During startup the udev node device driver impl uses a background thread
to populate the list of devices to avoid blocking the daemon startup
entirely. There is no synchronization to the public APIs, so it is
possible for an application to start calling APIs before the device
initialization is complete.

This was not a problem in the old approach where libvirtd was started
on boot, as initialization would easily complete before any APIs were
called.

With the use of socket activation, however, APIs are invoked from the
very moment the daemon starts. This is easily seen by doing a

  'virsh -c nodedev:///system list'

the first time it runs it will only show one or two devices. The second
time it runs it will show all devices. The solution is to introduce a
flag and condition variable for APIs to synchronize against before
returning any data.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-03-16 17:35:04 +00:00
Daniel P. Berrangé
5bff668dfb src: improve thread naming with human targetted names
Historically threads are given a name based on the C function,
and this name is just used inside libvirt. With OS level thread
naming this name is now visible to debuggers, but also has to
fit in 15 characters on Linux, so function names are too long
in some cases.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-03-05 12:23:04 +00:00
Ján Tomko
6a6cd16ca2 node_device: hal: include virutil.h
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b11e8cccdd
2020-02-25 01:32:19 +01:00
Ján Tomko
7e0d11be5b virsh: include virutil.h where used
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-02-24 23:15:50 +01:00
Daniel P. Berrangé
2621d48f00 gnulib: delete all gnulib integration
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.

Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 15:03:54 +00:00
Daniel P. Berrangé
207709a031 libvirt: pass a directory path into drivers for embedded usage
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.

This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.

It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-27 11:02:16 +00:00
Jonathon Jongsma
d7da92a9ce nodedev: Use autofree for more local variables
Simplify function logic by using g_autofree to free local variables so
that we can remove some goto statements that are used for cleanup.

Introduce a g_autoptr cleanup function for virNodeDeviceDef.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-23 10:04:22 +01:00
Daniel Henrique Barboza
c57d01479d node_device: remove unneeded labels
gather_scsi_host_cap() in node_device_hal.c can be greatly
simplified, given that the 'out' label is always getting
hit regardless of 'retval', which can also be eliminated.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-07 16:40:41 +01:00
Daniel P. Berrangé
12d17dcc26 src: replace last_component() with g_path_get_basename()
The last_component() method is a GNULIB custom function
that returns a pointer to the base name in the path.
This is similar to g_path_get_basename() but without the
malloc. The extra malloc is no trouble for libvirt's
needs so we can use g_path_get_basename().

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Fabiano Fidêncio
b311ae9e5b node_device: Don't check the output of virGetUserRuntimeDirectory()
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.

Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-20 09:38:43 +01:00
Michal Privoznik
49c6fe6201 configure: Provide OpenRC scripts for sub-daemons
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.

For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-16 10:11:22 +01:00
Pavel Hrdina
c275ea93db use g_ascii_isalnum instead of c_isalnum from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:23 +01:00
Daniel Henrique Barboza
5231b480d4 node_device: remove unneeded cleanup labels
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-12 17:54:01 +01:00
Michal Privoznik
7847f011b0 node_device: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:58 +01:00
Michal Privoznik
f4eb27a9b4 make check-driverimpls work again
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-12 15:00:01 +01:00
Michal Privoznik
4ae7181376 src: Make check-aclrules work again
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-12 15:00:01 +01:00
Pavel Hrdina
0985a9597b src: stop distributing generated source files
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
b98f90cf91 src: access: generate source files into build directory
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Peter Krempa
0967708b81 util: buffer: Remove virBufferCheckError
The function now does not return an error so we can drop it fully.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Ján Tomko
7f1f0453fc node_device: use g_strdup instead of VIR_STRDUP
Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:57 +02:00
Ján Tomko
7b48bb8ca0 Use g_strdup to fill in default values
Replace:
  if (!s && VIR_STRDUP(s, str) < 0)
    goto;
with:
  if (!s)
    s = g_strdup(str);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:55 +02:00
Ján Tomko
64023f6d21 Use g_strdup instead of ignoring VIR_STRDUP's value
Replace all the occurrences of
  ignore_value(VIR_STRDUP(a, b));
with
  a = g_strdup(b);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:55 +02:00
Daniel P. Berrangé
b36b20a1b3 build: fix use of $(AUG_GENTEST) as a dependency
The use of $(AUG_GENTEST) as a dependency in the makefiles is
a problem because this was assumed to be the filename of the
script, but is in fact a full shell command line.

Split it into two variables, so it can be correctly used for
dependencies.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-18 13:54:03 +01:00
Ján Tomko
1e2ae2e311 Use g_autofree instead of VIR_AUTOFREE
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
67e72053c1 Use G_N_ELEMENTS instead of ARRAY_CARDINALITY
Prefer the GLib version of the macro.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 16:14:19 +02:00
Ján Tomko
1bfa9fb3bc node_device: use G_GNUC_UNUSED
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 11:25:23 +02:00
Daniel P. Berrangé
cfbe9f1201 build: link to glib library
Add the main glib.h to internal.h so that all common code can use it.

Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.

This was feature was dropped in 2.46.0 with:

      commit 3be6ed60aa58095691bd697344765e715a327fc1
      Author: Alexander Larsson <alexl@redhat.com>
      Date:   Sat Jun 27 18:38:42 2015 +0200

        Deprecate and drop support for memory vtables

Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in

    commit 1f24b36607bf708f037396014b2cdbc08d67b275
    Author: Daniel P. Berrangé <berrange@redhat.com>
    Date:   Thu Sep 5 14:37:54 2019 +0100

        gmem: clarify that g_malloc always uses the system allocator

Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.

This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.

This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.

Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-14 10:54:42 +01:00
Daniel Henrique Barboza
ceea0a010a node_device_driver.c: use virConnectValidateURIPath()
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-26 17:25:20 -04:00
Daniel P. Berrangé
851dba3f47 build: ensure Makefile.inc.am is checked for long lines
The filename match rule was accidentally excluding the
Makefile.inc.am files from the long lines check.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-24 11:50:27 +01:00
Daniel P. Berrangé
d29c917ef4 src: honour the RUNSTATEDIR variable in all code
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.

Some duplicate paths in the apparmor code are also purged.

There's no functional change by default yet since both expressions
expand to the same value.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-27 10:23:13 +01:00
Daniel P. Berrangé
e4de8857ad nodedev: introduce virtnodedevd daemon
The virtnodedevd daemon will be responsible for providing the nodedev API
driver functionality. The nodedev driver is still loaded by the main
libvirtd daemon at this stage, so virtnodedevd must not be running at
the same time.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-09 14:06:31 +01:00
Daniel P. Berrangé
4ce29411fc remote: in per-driver daemons ensure that state initialize succeeds
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.

When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-09 14:06:31 +01:00
Daniel P. Berrangé
cb1938eb58 all: don't wait for driver lock during startup
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-15 13:36:45 +01:00
Daniel P. Berrangé
ec9f1cd569 nodedev: add missing include for virFileMakePathWithMode
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-11 14:19:03 +01:00
Daniel P. Berrangé
3e846a1621 nodedev: acquire a pidfile in the driver root directory
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.

In privileged libvirtd this ends up locking

   /var/run/libvirt/nodedev/driver.pid

In unprivileged libvirtd this ends up locking

  /run/user/$UID/libvirt/nodedev/run/driver.pid

NB, the latter can vary depending on $XDG_RUNTIME_DIR

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-11 12:46:20 +01:00
Ján Tomko
02de59ccb6 build: drop check for udev_monitor_set_receive_buffer_size
It has been exported by systemd commit
commit a571c23e954cb88cdd5faa28593b19bd7c340130
    libudev: export udev_monitor_set_receive_buffer_size()
released in v183.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2019-05-16 16:39:46 +02:00
Pavel Hrdina
91268c715c node_device_udev: remove deprecated logging function
The function was deprecated in udev 219 and all the supported OSes
don't have older version of udev or systemd.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-05-15 10:42:44 +02:00
Andrea Bolognani
03a07357e1 maint: Add filetype annotations to Makefile.inc.am
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-12 16:55:38 +02:00
Cole Robinson
ba32be8467 node_device_hal.h: Use #pragma once
Acked-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-04 18:42:10 -04:00
Cole Robinson
c12f687999 node_device_udev.h: Use #pragma once
Acked-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-04 18:42:09 -04:00
Cole Robinson
23bda3b782 node_device_driver.h: Use #pragma once
Acked-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-04 18:42:09 -04:00
Nikolay Shirokovskiy
1193d9737b xml: nodedev: make pci capability class element optional
Commit 3bd4ed46 introduced this element as required which
breaks backcompat for test driver. Let's make the element optional.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-03-22 12:59:56 +03:00
Michal Privoznik
ed454facd4 node_device_hal.c: Follow _class -> klass rename
In 0eca80e60 _class was renamed to klass for variety of struct
members. However, gather_usb_cap() was missed out in this rename
leaving FreeBSD build broken.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-18 14:46:52 +01:00
Nikolay Shirokovskiy
0eca80e606 conf: don't use "class" as name
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.

Let's just use "klass" as field name instead of _class or class
and add syntax rule.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-18 11:14:37 +03:00
Marc Hartmayer
27eb324668 udev: wake up the udev thread for stopping it
Signal the udev thread the change of `priv->threadQuit` by using the
thread condition.

Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-20 14:07:48 -05:00
Marc Hartmayer
9380d92d6f udev: nodeStateInitializeEnumerate: remove watch handle in case of an error
If the udev thread is stopped, it must be ensured that the watch
handle is also removed from the main loop.

Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-20 14:07:42 -05:00
Marc Hartmayer
4c4ff7a1a0 udev: only report a warning if udev_enumerate_scan_devices fails
Even if an error is reported by `udev_enumerate_scan_devices`,
e.g. because a driver of a device has an bug, we can still enumerate
all other devices. Additionally the documentation of
udev_enumerate_scan_devices says that on success an integer >= 0 is
returned (see man udev_enumerate_scan_devices(3)).

Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-14 08:46:45 -05:00
Cole Robinson
af36f8a641 Require a semicolon for VIR_ONCE_GLOBAL_INIT calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.

Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
Daniel P. Berrangé
568a417224 Enforce a standard header file guard symbol name
Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:47:13 +00:00
Daniel P. Berrangé
4cfd709021 Fix many mistakes & inconsistencies in header file layout
This introduces a syntax-check script that validates header files use a
common layout:

  /*
   ...copyright header...
   */
  <one blank line>
  #ifndef SYMBOL
  # define SYMBOL
  ....content....
  #endif /* SYMBOL */

For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:

  #ifndef SYMBOL_ALLOW
  # error ....
  #endif /* SYMBOL_ALLOW */
  <one blank line>

The many mistakes this script identifies are then fixed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:46:53 +00:00
Daniel P. Berrangé
600462834f Remove all Author(s): lines from source file headers
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-13 16:08:38 +00:00
Erik Skultety
f1e8d2f09a conf: Add new module node_device_util
There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-12 16:23:35 +01:00