The function does not do anything that could fail. Remove the return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainPrepareDiskSourceData historically prepared everything but
we've split out the majority of the functionality so that it sets up
predominately only according to the configuration of the disk. There
was one leftover bit of setting the gluster debug level from the config.
Split this out into a separate function so that
qemuDomainPrepareDiskSourceData only prepares based on the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ACKed-by: Eric Blake <eblake@redhat.com>
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The disk type is not part of source and thus it's parsed earlier. This
bypasses the checks when parsing a disk type='network' if it's
completely missing the source.
Since there are possible active users of this (it was reported as a
problem with openstack) fix it by resetting the disk type to '_FILE' for
an empty cdrom which is handled correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the callers of these functions only check for a negative
return value.
However, virNetDevOpenvswitchGetVhostuserIfname is documented
as returning 1 for openvswitch interfaces so preserve that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP_QUIET(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the default iptables setup used by Fedora/RHEL distros
only restricts traffic on the INPUT and/or FORWARD rules,
some users might have custom firewalls that restrict the
OUTPUT rules too.
These can prevent DHCP/DNS/TFTP responses from dnsmasq
from reaching the guest VMs. We should thus whitelist
these protocols in the OUTPUT chain, as well as the
INPUT chain.
Signed-off-by: Malina Salina <malina.salina@protonmail.com>
Initial patch then modified to add unit tests and IPv6
support
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the removal of support for log message stack traces, there is
nothing using the logging filter/output flags and they can be removed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The log filters have supported the use of a "+" before the source match
string to request that a stack trace be emitted for every log message:
commit 548563956e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 9 15:18:56 2012 +0100
Allow stack traces to be included with log messages
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
With the huge & ever increasing number of logging statements per file,
this will be incredibly verbose and have a major performance penalty.
This makes the feature impractical to use widely and as such it is not
worth the code maint cost.
Removing this seldom used feature allows us to drop the 'execinfo'
module in gnulib which provides the backtrace() function which doesn't
exist on non-Linux.
Users who want to get stack traces of parts of libvirt can use GDB,
or systemtap for live tracing with minimal perf impact.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Now that we no longer use any of the macros from this file, remove it.
This also removes a typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prefer G_GNUC_NULL_TERMINATED which was introduced in GLib 2.8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all usage of ATTRIBUTE_NORETURN in favor of GLib's
G_GNUC_NORETURN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In upcoming commits, virSecurityManagerSetAllLabel() will perform
rollback in case of failure by calling
virSecurityManagerRestoreAllLabel(). But in order to do that, the
former needs to have @migrated argument so that it can be passed
to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_strerror is offers the safety/correctness benefits of strerror_r, with
the API design convenience of strerror.
Use of virStrerror should be eliminated through the codebase in favour
of g_strerror.
commandhelper.c is a special case as its a tiny single threaded test
program, not linked to glib, so it just uses traditional strerror().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Converting from virObject to GObject is reasonably straightforward,
as illustrated by this patch for virIdentity
In the header file
- Remove
typedef struct _virIdentity virIdentity
- Add
#define VIR_TYPE_IDENTITY virIdentity_get_type ()
G_DECLARE_FINAL_TYPE (virIdentity, vir_identity, VIR, IDENTITY, GObject);
Which provides the typedef we just removed, and class
declaration boilerplate and various other constants/macros.
In the source file
- Change 'virObject parent' to 'GObject parent' in the struct
- Remove the virClass variable and its initializing call
- Add
G_DEFINE_TYPE(virIdentity, vir_identity, G_TYPE_OBJECT)
which declares the instance & class constructor functions
- Add an impl of the instance & class constructors
wiring up the finalize method to point to our dispose impl
In all files
- Replace VIR_AUTOUNREF(virIdentityPtr) with g_autoptr(virIdentity)
- Replace virObjectRef/Unref with g_object_ref/unref. Note
the latter functions do *NOT* accept a NULL object where as
libvirt's do. If you replace g_object_unref with g_clear_object
it is NULL safe, but also clears the pointer.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To simplify the later conversion from virObject to GObject, introduce
the use of g_autoptr to the virIdentity implementnation and test suite.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the standard macro will facilitate the conversion to glib's
auto cleanup macros.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This isn't exactly equivalent setting (acpi_firmware may point to
non-SLIC ACPI table), but it's the most behavior preserving option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
The object locking test code is not run by any CI tests and has
bitrotted to the point where it isn't worth the effort to try to
fix it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Linux kernel 5.1 added a new PPC KVM capability named
KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST, which is exposed to the QEMU guest
since QEMU commit 8ff43ee404d under a new sPAPR capability called
SPAPR_CAP_CCF_ASSIST. This cap indicates whether the processor supports
hardware acceleration for the count cache flush workaround, which
is a software workaround that flushes the count cache on context
switch. If the processor has this hardware acceleration, the software
flush can be shortened, resulting in performance gain.
This hardware acceleration is defaulted to 'off' in QEMU. The reason
is that earlier versions of the Power 9 processor didn't support
it (it is available on Power 9 DD2.3 and newer), and defaulting this
option to 'on' would break migration compatibility between the Power 9
processor class.
However, the user running a P9 DD2.3+ hypervisor might want to create
guests with ccf-assist=on, accepting the downside of only being able
to migrate them only between other P9 DD2.3+ hosts running upstream
kernel 5.1+, to get a performance boost.
This patch adds this new capability to Libvirt, with the name of
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Add a qemu capbility to see if the standalone ramfb device is available.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When connecting to qemu's monitor the @vm object is unlocked.
This is justified - connecting may take a long time and we don't
want to wait with the domain object locked. However, just before
the domain object is locked again, the monitor's FD is registered
in the event loop. Therefore, there is a small window where the
event loop has a chance to call a handler for an event that
occurred on the monitor FD but vm is not initalized properly just
yet (i.e. priv->mon is not set). For instance, if there's an
incoming migration, qemu creates its socket but then fails to
initialize (for various reasons, I'm reproducing this by using
hugepages but leaving the HP pool empty) then the following may
happen:
1) qemuConnectMonitor() unlocks @vm
2) qemuMonitorOpen() connects to the monitor socket and by
calling qemuMonitorOpenInternal() which subsequently calls
qemuMonitorRegister() the event handler is installed
3) qemu fails to initialize and exit()-s, which closes the
monitor
4) The even loop sees EOF on the monitor and the control gets to
qemuProcessEventHandler() which locks @vm and calls
processMonitorEOFEvent() which then calls
qemuMonitorLastError(priv->mon). But priv->mon is not set just
yet.
5) qemuMonitorLastError() dereferences NULL pointer
The solution is to unlock the domain object for a shorter time
and most importantly, register event handler with domain object
locked so that any possible event processing is done only after
@vm's private data was properly initialized.
This issue is also mentioned in v4.2.0-99-ga5a777a8ba.
Since we are unlocking @vm and locking it back, another thread
might have destroyed the domain meanwhile. Therefore we have to
check if domain is still active, and we have to do it at the
same place where domain lock is acquired back, i.e. in
qemuMonitorOpen(). This creates a small problem for our test
suite which calls qemuMonitorOpen() directly and passes @vm which
has no definition. This makes virDomainObjIsActive() call crash.
Fortunately, allocating empty domain definition is sufficient.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU 2.11 for ppc64 changed all CPU model names to lower case. Since
libvirt can't change the model names for compatibility reasons, we need
to translate the matching lower case models to the names known by
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fb973cfbb4 added versioned test outputs for the above mentioned
tests but didn't actually enable them. Fix that mistake and fix the
output of the tsc-frequency test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test data was modernized to use actual caps but commit 4dadcaa98e
forgot to delete this test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser.
The argv generator tests are provided by:
machine-aeskeywrap-on-caps
machine-aeskeywrap-on-cap
machine-aeskeywrap-off-caps
machine-aeskeywrap-off-cap
machine-deakeywrap-on-caps
machine-deakeywrap-on-cap
machine-deakeywrap-off-caps
machine-deakeywrap-off-cap
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by many tests for
pseries guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by
'serial-pty-chardev'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The mktempd module in gnulib provides an equivalent to 'mktemp -d' on
platforms which lack this shell command. All platforms on which libvirt
runs the affected tests have 'mktemp -d' support, so the gnulib module
is not required.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
086c19d69 added bochs-display capability but didn't fill in the info for
domain capabilities.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability enables comparison of CPU models via QMP.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-13-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This capability enables baselining of CPU models via QMP.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-9-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some older s390 CPU models (e.g. z900) will not report props as a
response from query-cpu-model-expansion. As such, we should make the
props field optional when parsing the return data from the QMP response.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-6-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When expanding a CPU model via query-cpu-model-expansion, any features
that were a part of the original model are discarded. For exmaple,
when expanding modelA with features f1, f2, a full expansion may reveal
feature f3, but the expanded model will not include f1 or f2.
Let's pass a virCPUDefPtr to the expansion function in preparation for
taking features into consideration.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-4-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Consider having a nc binary in the path with a space in its name,
for example '/tmp/fo o/nc'
This results in libvirt running SSH with the following arg value
"'if ''/tmp/fo o/nc'' -q 2>&1 | grep \"requires
an argument\" >/dev/null 2>&1; then ARG=-q0;
else ARG=;fi;''/tmp/fo o/nc'' $ARG -U
/var/run/libvirt/libvirt-sock'"
The use of the single quote escaping was introduced by
commit 6ac6238de3
Author: Guido Günther <agx@sigxcpu.org>
Date: Thu Oct 13 21:49:01 2011 +0200
Use virBufferEscapeShell in virNetSocketNewConnectSSH
to escape the netcat command since it's passed to the shell. Adjust
expected test case output accordingly.
While the intention of this change was good, the result is broken as it
is still underquoted.
On the SSH server side, SSH itself runs the command via the shell.
Our command is then invoking the shell again. Thus we see
$ virsh -c qemu+ssh://root@domokun/system?netcat=%2Ftmp%2Ffo%20o%2Fnc list
error: failed to connect to the hypervisor
error: End of file while reading data: sh: /tmp/fo: No such file or directory: Input/output error
With the second level of escaping added we can now successfully use a nc
binary with a space in the path.
The original test case added was misleading as it illustrated using a
binary path of 'nc -4' which is not a path, it is a command with a
separate argument, which is getting interpreted as a path.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that qemu 4.1 was released we can update the capabilities to the
final form.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
define a VIR_DEFINE_AUTOPTR_FUNC() to autofree virNetworkPortDefs, and
convert all uses of virNetworkPortDefPtr that are appropriate to use
it.
This coincidentally fixes multiple potential memory leaks (in failure
cases) in networkPortCreateXML()
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For each vhost-user GPUs,
- build a socket chardev, and pass the vhost-user socket to it
- build a vhost-user video device and associate it with the chardev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Learn to override the paths to the program to execute (vhost-user
helpers are executed to check for runtime capabilities).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.
qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user device doesn't have a virgl option, it is passed to the
vhost-user-gpu helper process instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Check qemu capability, and accept 3d acceleration. 3d acceleration
support is checked when looking for a suitable vhost-user helper.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Those new devices are available since QEMU 4.1.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't need to escape the commands any more since we use QMP
passthrough, which means we can delete the functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither virThreadInitialize or virThreadOnExit do anything since we
dropped the Win32 threads impl, in favour of win-pthreads with:
commit 0240d94c36
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 22 16:17:10 2014 +0000
Remove windows thread implementation in favour of pthreads
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 0cebb6422a.
This capability is not used anywhere and also it is not contained
in any release so it's safe to just remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that qemu is capable -netdev socket is not enough to
start a migratable domain. It also needs dbus-vmstate capability.
Since there are already some qemu releases which have
net-socket-dgram capability and don't have dbus-vmstate we need
to check for dbus-vmstate.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virIdentity getters are unusual in that they return -1 to indicate
"not found" and don't report any error. Change them to return -1 for
real errors, 0 for not found, and 1 for success.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is simpler to remove this unused method than to rewrite it using
typed parameters in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Only expose the type safe getters/setters to other code in preparation
for changing the internal storage of data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the "UNIX" tag from the names for user name, group name,
process ID and process time, since these attributes are all usable
for non-UNIX platforms like Windows.
User ID and group ID are left with a "UNIX" tag, since there's no
equivalent on Windows. The closest equivalent concept on Windows,
SID, is a struct containing a number of integer fields, which is
commonly represented in string format instead. This would require
a separate attribute, and is left for a future exercise, since
the daemons are not currently built on Windows anyway.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There were accidentally two disks with 'vdc' target with corresponding
blockjobs which made libvirt leak some references as there are not
supposed to be two blockjobs for a single disk. Fix this mess by
renaming some of the disks.
In addition the block job names also didn't correspond to the naming
convetion which also includes the disk target. Fix it as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The virTestOOMActive method was deleted in
commit 2c52ecd960
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 29 13:04:07 2019 +0100
util: purge all code for testing OOM handling
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.
Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is one hack hidden here, but since this is in a test, it's
okay. In order to get a list of expected firmwares in
virFirmwarePtr form I'm using virFirmwareParseList(). But
usually, in real life scenario, this function is used only to
parse a list of UEFI images which have NVRAM split out. In other
words, this function expects ${FW}:${NVRAM} pairs. But in this
test, we also want to allow just a single path: ${FW} because
some reported firmwares are just a BIOS image really. To avoid
writing some parser function, let's just pass "NULL" as ${NVRAM}
and fix the result later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The qemuFirmwareGetSupported() function is called from qemu
driver to generate domain capabilities XML based on FW descriptor
files. However, the function currently reports only some features
from domcapabilities XML and not actual FW image paths. The paths
reported in the domcapabilities XML are still from pre-FW
descriptor era and therefore the XML might be a bit confusing.
For instance, it may say that secure boot is supported but
secboot enabled FW is not in the listed FW image paths.
To resolve this problem, change qemuFirmwareGetSupported() so
that it also returns a list of FW images (we have the list
anyway). Luckily, we already have a structure to represent a FW
image - virFirmware.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1733940
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The Perl bindings for libvirt use the test driver for unit tests. This
tries to load the cpu_map/index.xml file, and when run from an
uninstalled build will fail.
The problem is that virFileActivateDirOverride is called by our various
binaries like libvirtd, virsh, but is not called when a 3rd party app
uses libvirt.so
To deal with this we allow the LIBVIRT_DIR_OVERRIDE=1 env variable to be
set and make virInitialize look for this. The 'run' script will set it,
so now build using this script to run against an uninstalled tree we
will correctly resolve files to the source tree.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 39dded7bb6.
This commit broke virpolkittest on Ubuntu 18 which has an old
dbus (v1.12.2). Any other distro with the recent one works
(v1.12.16) which hints its a bug in dbus somewhere. Revert the
commit to stop tickling it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If managed='no', then the tap device must already exist, and setting
of MAC address and online status (IFF_UP) is skipped.
NB: we still set IFF_VNET_HDR and IFF_MULTI_QUEUE as appropriate,
because those bits must be properly set in the TUNSETIFF we use to set
the tap device name of the handle we've opened - if IFF_VNET_HDR has
not been set and we set it the request will be honored even when
running libvirtd unprivileged; if IFF_MULTI_QUEUE is requested to be
different than how it was created, that will result in an error from
the kernel. This means that you don't need to pay attention to
IFF_VNET_HDR when creating the tap devices, but you *do* need to set
IFF_MULTI_QUEUE if you're going to use multiple queues for your tap
device.
NB2: /dev/vhost-net normally has permissions 600, so it can't be
opened by an unprivileged process. This would normally cause a warning
message when using a virtio net device from an unprivileged
libvirtd. I've found that setting the permissions for /dev/vhost-net
permits unprivileged libvirtd to use vhost-net for virtio devices, but
have no idea what sort of security implications that has. I haven't
changed libvrit's code to avoid *attempting* to open /dev/vhost-net -
if you are concerned about the security of opening up permissions of
/dev/vhost-net (probably a good idea at least until we ask someone who
knows about the code) then add <driver name='qemu'/> to the interface
definition and you'll avoid the warning message.
Note that virNetDevTapCreate() is the correct function to call in the
case of an existing device, because the same ioctl() that creates a
new tap device will also open an existing tap device.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patch had to add '/sys/kernel/' prefix in opendir() because
the path, which is being mocked, wasn't being considered due to
an 'if SYSFS_PCI_PREFIX' guarding the call to getrealpath().
In fact, all current getrealpath() callers are guarding it with a
conditional to ensure that the function will never be called with
a non-mocked path. In this case, an extra non-NULL verification is
needed for the 'newpath' string to use the variable - which is
counterintuitive, given that getrealpath() will always write the
'newpath' string in any non-error conditon.
However, simply removing the guard of all getrealpath() instances
causes an abort in init_env(). This happens because tests will
execute access() to non-mocked paths even before the
LIBVIRT_FAKE_ROOT_DIR variable is declared in the test files. We
don't need 'fakerootdir' to be created at this point though.
This patch does the following changes to simplify getrealpath()
usage:
- getrealpath() will now guard the init_env() call by checking if
both fakeroot isn't created and the required path is being mocked.
This ensures that we're not failing inside init_env() because
we're too early and LIBVIRT_FAKE_ROOT_DIR wasn't defined yet;
- remove all conditional guards to call getrealpath() from
access(), virMockStatRedirect(), open(), open_2(), opendir()
and virFileCanonicalizePath(). As a bonus, remove all ternary
conditionals with 'newpath';
- a new 'pathPrefixIsMocked()' helper to aggregate all the prefixes
we're mocking, making it easier to add/remove them. If a prefix
is added inside this function, we can be sure that all functions
are mocking them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds hostdev test cases in qemuhotplugtest.c.
Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The softlink to physfn is the way to know if the device is
VF or not. So, the patch softlinks 'physfn' to the parent function.
The multifunction PCI devices dont have 'physfn' softlinks.
The patch adds few Virtual functions to the mock environment and
changes the existing VFIO test xmls using the VFs to use the newly
added VFs for their use case.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds mock of the /dev/vfio path, needed for proper
implementation of the support for multifunction/multiple devices
per iommu groups.
To do that, the existing bind and unbind operations were adapted
to operate with the mocked filesystem as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Datagram socket is available since qemu 4.0, commit
fdec16e3c2a614e2861f3086b05d444b5d8c3406 ("net/socket: learn to talk
with a unix dgram socket").
Required for slirp-helper communication.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dbus_message_new() does not construct correct replies by itself, it is
recommended to use dbus_message_new_method_return() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is failing, because it ends up being parsed with version='default'
and expects '1.2' instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.
To avoid this, don't clear the user-defined alias for video devices of
type "none".
https://bugzilla.redhat.com/show_bug.cgi?id=1720612
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Pass in backing store explicitly to qemuBlockStorageSourceGetBlockdevProps
and fix the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As qemu documents we should use everything in the 'props' sub-object of
the data returned by query-hotpluggable-cpus. Until now we only used
everything we recognized, but that may break in cases when qemu
introduces new fields.
This change requires a fix to the test data as some fields were
reordered.
https://bugzilla.redhat.com/show_bug.cgi?id=1741658
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When we're collecting guest information, older agents may not support
all agent commands. In the case where the user requested all info
types (i.e. types == 0), ignore unsupported command errors and gather as
much information as possible. If the agent command failed for some other
reason, or if the user explciitly requested a specific info type (i.e.
types != 0), abort on the first error.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Adding a failure test for booting from a vhost scsi hostdev device.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a libvirt error occurred during a test, then virTestRun()
reports it (regardless of test returning success or failure).
For instance, in this specific case, a hostdev is detached twice
and the second attempt is expected to fail. It does fail and
libvirt error is reported which is then printed onto stderr.
Insert virResetLastError() calls on appropriate places to avoid
that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this test there is this macro CHECK_LIST_COUNT() which checks
if a list of PCI devices contains expected count. If it doesn't
an error is reported and 'goto cleanup' is invoked. There's no
real reason for that as even since its introduction there is no
cleanup done and all 'cleanup' labels contain nothing but
'return'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few functions called from the test which return an
integer but their retval is compared as if it was a pointer.
Now, there is nothing wrong with that from machine POV, but
from readability perspective it's wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the legacy xen driver was removed the libxl driver became
the only consumer of xenconfig. Move the few files in xenconfig
to the libxl driver and remove the directory.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function adds the complete filesystem information returned by the
qemu agent to an array of typed parameters with field names intended to
to be returned by virDomainGetGuestInfo()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function queries timezone information within the guest and adds
the information to an array of typed parameters with field names
intended to be returned to virDomainGetGuestInfo()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function queries the guest operating system information and adds
the returned information to an array of typed parameters with field
names intended to be returned in virDomainGetGuestInfo().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function fetches the list of logged-in users from the qemu agent
and adds them to a list of typed parameters so that they can be used
internally in libvirt.
Also add some basic tests for the function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Using inline authentication for storage volumes will not work properly
as libvirt requires use of the secret driver for the auth data and
thus would not be able to represent the passwords stored in the backing
store string.
Make sure that the backing store parsers return 1 which is a sign for
the caller to not use the file in certain cases.
The test data include iscsi via a json pseudo-protocol string and URIs
with the userinfo part being present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify testBackingParse to allow testing other return values of the
backing store string parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return the parsed storage source via an pointer in arguments and return
an integer from the function. Describe the semantics with a comment for
the function and adjust callers to the new semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically clean the temporary buffer and get rid of the cleanup
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's a bad idea to use userinfo to pass credentials via a URI add
a test that we at least do the correct thing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A library has to be built with -flat_namespace to get all references to
global symbols indirected. That can also be achieved with two-level
namespace interposition but we're not using explicit symbol
interposition since it's more verbose and requires massive changes to
the mocks.
This provides a way to interpose a mock for virQEMUCapsProbeHostCPU from
qemucpumock and fixes domaincapstest on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
gnulib headers change stat, lstat and open to replacement functions,
even for function definitions. This effectively disables standard
library overrides in virfilewrapper and virmockstathelpers since they
are never reached.
Rename the functions and provide a declartion that uses correct
assembler name for the mocks.
This fixes firmware lookup in domaincapstest on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Test executables and mocks have assumption that any symbol can be
replaced with LD_PRELOAD. That's not a case for macOS unless flat
namespace is used, because every external symbol reference records the
library to be looked up. And the symbols cannot be replaced unless dyld
interposing is used.
Setting DYLD_FORCE_FLAT_NAMESPACE changes symbol lookup behaviour to be
similar to Linux dynamic linker. It's more lightweight solution than
explicitly decorating all mock symbols as interpositions and building
libvirt as interposable dynamic library.
This fixes vircryptotest and allows to proceed other tests that rely on
mocks a little bit further.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
macOS syscall interface (/usr/lib/system/libsystem_kernel.dylib) has
three kinds of stat but only one of them can be used to fill
"struct stat": stat$INODE64.
virmockstathelpers looks up regular stat instead of stat$INODE64. That
causes a failure in qemufirmwaretest because "struct stat" is laid out
differently from the values returned by stat.
Introduce VIR_MOCK_REAL_INIT_ALIASED that can be used to lookup
stat$INODE64 and lstat$INODE64 and use it to setup real functions on
macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
/tmp is a symbolic link to /private/tmp on macOS. That causes failures
in commandtest, because getcwd returns /private/tmp and the expected
output doesn't match to "CWD: /tmp".
Rathern than making a copy of commanddata solely for macOS, the /private
prefix is stripped.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
macOS has two kinds of loadable libraries: MH_BUNDLE, and MH_DYLIB.
bundle is used for plugins that are loaded with dlopen/dlsym/dlclose.
And there's no way to preload a bundle into an application. dynamic
linker (dyld) will reject it when finds it in DYLD_INSERT_LIBRARIES.
Unfortunately, a bundle is built if -module flag is provided to libtool.
The flag has been removed to build dylibs with ".dylib" suffix.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.
While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD. That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
LD_PRELOAD has no effect on macOS. Instead, dyld(1) provides a way for
symbol hooking via DYLD_INSERT_LIBRARIES. The variable should contain
colon-separated paths to the dylibs to be inserted.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
getnameinfo on macOS formats certain IPv6 addresses as IPv4-translated
addresses. The following pattern has been observed:
::ffff is formated as ::0.0.255.255
::fffe is formated as ::0.0.255.254
::ffff:0 is formated as ::255.255.0.0
::fffe:0 is formated as ::255.254.0.0
::ffff:0:0 is formated as ::ffff:0.0.0.0
::fffe:0:0 is formated as ::fffe:0:0
::ffff:0:0:0 is formated as ::ffff:0:0:0
The getnameinfo behavior causes a failure for:
DO_TEST_PARSE_AND_FORMAT("::ffff", AF_UNSPEC, true);
Use non-ambigious IPv6 for parse/format testing.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
getaddrinfo on macOS doesn't interpret octal IPv4 addresses. Only
inet_aton can be used for that. Therefore, from macOS standpoint
"0177.0.0.01" is not the same as "127.0.0.1".
The issue was also discovered by python and dotnet core:
https://bugs.python.org/issue27612https://github.com/dotnet/corefx/issues/8362
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
This enum was introduced to model how RHEL-7 kernel behaves - for
some reason going with the old way (via new_id + bind) fails but
using driver_override succeeds. Well, we don't need to care about
that anymore since we don't create new_id file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that PCI attach/detach happens solely via driver_override
these two files are no longer needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing supports "pci-stub" driver (aka KVM style of PCI
device assignment) there is no need for virpcimock to create it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The KVM assignment was removed in qemu driver in previous commit.
Remove it from domaincapstest too which is hard coding it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
KVM style of PCI devices assignment was dropped in kernel in
favor of vfio pci (see kernel commit v4.12-rc1~68^2~65). Since
vfio is around for quite some time now and is far superior
discourage people in using KVM style.
Ideally, I'd make QEMU_CAPS_VFIO_PCI implicitly assumed but turns
out qemu-3.0.0 doesn't support vfio-pci device for RISC-V.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It may happen that we leave some XATTRs behind. For instance, on
a sudden power loss, the host just shuts down without calling
restore on domain paths. This creates a problem, because when the
host starts up again, the XATTRs are there but they don't reflect
the true state and this may result in libvirt denying start of a
domain.
To solve this, save a unique timestamp (host boot time) among
with our XATTRs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741140
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In preparation to moving the validation to the parser,
we need to supply the correct caps.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
resctrl object stored in def->resctrls is shared by cachetune and
memorytune. The domain xml configuration is parsed firstly for
cachetune then memorytune, and the resctrl object will not be created
in parsing settings for memorytune once it found sharing exists.
But resctrl is improperly freed when sharing happens.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mocking of the __open_2 function was added in
commit 459f071cac
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Thu Aug 15 16:37:17 2019 +0200
virpcimock: Mock __open_2()
This function only exists in glibc, however, and the mocking code runs
on systems not using glibc, such as FreeBSD. Even Linux hosts might be
using a different libc impl, though we don't actively try to support
that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The nwfilter XML configs are not merely examples, they are data that is
actively shipped and used in production by users.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In particular, use DO_TEST_CAPS_LATEST which tests the canonical
'hv-feature' syntax instead of 'hv_feature' aliases and DO_TEST_CAPS_VER
with 4.0.0 to also test the old syntax.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The pci-stub is so old school that no one uses it. All modern
systems have adapted VFIO. Switch our virpcitest too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The pci-stub is so old school that no one uses it. All modern
systems have adapted VFIO. Switch our virhostdevtest too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The pci-assign device is so old school that no one uses it. All
modern systems have adapted VFIO. Switch our xml2argv test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, we don't need to create anything under
/sys/kernel/iommu_groups/N/devices directory (which is symlinked
from /sys/bus/pci/devices/DDDD:BB:DD.F/iommu_group directory)
because virhostdevtest still tests the old KVM assignment and
thus has no notion of IOMMU groups. This will change in near
future though. And in order to discover devices belonging to the
same IOMMU group we need to do what kernel does - create symlinks
to devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, we are creating devices directly under
/sys/bus/pci/devices/*. There is not much problem with it, but if
we really want to model kernel behaviour we need to create them
under /sys/devices/pciDDDD:BB and then only symlink them from the
old location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In upcoming patches we will need only some portions of the PCI
address. To construct that easily, it's better if the PCI address
of a device is stored as four integers rather than one string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Have just one function to generate path to a PCI driver so that
when we change it in near future there's only few of the places
we need to fix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Have just one function to generate path to a PCI device so that
when we change it in near future there's only few of the places
we need to fix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In near future, we will be creating devices under different
location and just symlink them under devices/. Just like real
kernel does. But for that we need the directories to exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We will need to create more directories and instead of
introducing bunch of new variables to hold their actual
paths, we can have one and reuse it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The @fakesysfspcidir is derived from @fakerootdir. We don't need
two global variables that contain nearly the same content,
especially when we construct the actual path anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It saves us couple of lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When creating a PCI device, the pciDevice structure contains @id
member which holds device address (DDDD.BB:DD.F) and is type of
'char *'. But the structure is initialized from a const char and
in fact we never modify or free the @id.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Newer kernels (v3.16-rc1~29^2~6^4) have 'driver_override' file
which simplifies way of binding a PCI device to desired driver.
Libvirt has support for this for some time too (v2.3.0-rc1~236),
but not our virpcimock. So far we did not care because our code
is designed to deal with this situation. Except for one.
hypothetical case: binding a device to the vfio-pci driver can be
successful only via driver_override. Any attempt to bind a PCI
device to vfio-pci driver using old method (new_id + unbind +
bind) will fail because of b803b29c1a. While on vanilla kernel
I'm able to use the old method successfully, it's failing on RHEL
kernels (not sure why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This reverts commit b70c093ffa.
In next commit the virpcimock is going to be extended and thus
binding a PCI device to vfio-pci driver will finally succeed.
Remove this test as it will no longer make sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The pci_driver_bind() and pci_driver_unbind() functions are
"internal implementation", meaning other parts of the code should
be able to call them and get the job done. Checking for actions
(PCI_ACTION_BIND and PCI_ACTION_UNBIND) should be done in
handlers (pci_driver_handle_bind() and
pci_driver_handle_unbind()). Surprisingly, the other two actions
(PCI_ACTION_NEW_ID and PCI_ACTION_REMOVE_ID) are checked already
at this level.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.
When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.
This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the nbd export name contains a colon, our parser would not parse it
properly as we split the string by colons. Modify the code to look up
the exportname and copy any trailing characters as the export name is
supposed to be at the end of the string.
https://bugzilla.redhat.com/show_bug.cgi?id=1733044
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In some cases e.g. with clang on fedora 30 __open2 isn't even declared
which results in the following build error:
/home/pipo/libvirt/tests/virpcimock.c:939:1: error: no previous prototype for function
'__open_2' [-Werror,-Wmissing-prototypes]
__open_2(const char *path, int flags)
Add a separate declaration to appease the compiler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Hold on to your hat, this is going to be a wild ride. As nearly
nothing in glibc, nor open() is a real function. Just look into
bits/fcntl2.h and you'll see that open() is actually a thin
wrapper that calls either __open_alias() or __open_2(). Now,
before 801ebb5edb the open() done in
virPCIDeviceConfigOpenInternal() had a constant oflags (we were
opening the pci config with O_RDWR). And since we were not
passing any mode nor O_CREAT the wrapper decided to call
__open_alias() which was open() provided by our mock. So far so
good. But after the referenced commit, the oflags is no longer
compile time constant and therefore the wrapper calls __open_2()
which we don't mock and thus the real __open_2() from glibc was
called and thus we did try to open real path from host's /sys.
This of course fails with variety of errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.0.0 and newer automatically drops caches at the end of migration.
Let's check for this capability so that we can allow migration when disk
cache is turned on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-By: Peter Krempa <pkrempa@redhat.com>
This reverts commit f38d553e2d.
Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
If /etc/qemu/firmware directory exists, but is not readable then
qemuxml2xmltest fails. This is because once domain XML is parsed
it is validated. For that domain capabilities are needed.
However, when constructing domain capabilities, FW descriptors
are loaded and this is the point where the test fails, because it
fails to open one of the directories.
Fixes: 5b9819eedc domain capabilities: Expose firmware auto selection feature
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have some early replies that don't quite match with how
QEMU 2.12.0 as released behaves.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update the KVM feature tests for QEMU's kvm-hint-dedicated
performance hint.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The various distros have the following libxml2 vesions:
CentOS 7: 2.9.1
Debian Stretch: 2.9.4
FreeBSD Ports: 2.9.9
Ubuntu 16.04 LTS: 2.9.3
Based on this sampling, we can reasonably bump libxml2 min
version to 2.9.1
The 'query_raw' struct field was added in version 2.6.28,
so can be assumed to exist.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general snapshot and checkpoint APIs were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefParseNode.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to latest rewrite of NSS module, we are doing yajl parsing
ourselves. This means, we had to introduce couple of callback
that yajl calls. According to its documentation, a callback can
cancel parsing if it returns a zero value. Well, we do just that
in the string callback (findLeasesParserString()). If the JSON
file we are parsing contains a key that we are not interested in,
zero is returned meaning stop all parsing. This is not correct,
because the JSON file can contain some other keys which are not
harmful for our address translation (e.g. 'client-id').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Confusing message is printed when a parse/format sockettest fails. E.g.
there's a test that parses/formats ::ffff and the format fails like that:
38) Test format ::ffff family AF_UNSPEC ...
Offset 2
Expect [0.0.255.255]
Actual [ffff]
It should be instead:
38) Test format ::ffff family AF_UNSPEC ...
Offset 2
Expect [ffff]
Actual [0.0.255.255]
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Thus we only need one API for env passthrough in virCommand.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d2899a648 added a new exit path, but didn't free @fakerootdir.
Let's just use VIR_AUTOFREE instead to make life easier.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The model logic is taken from qemuDomainRNGDefValidate
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In near future we will need to check for number of members of two
different types of lists: PCI and NVMe. Rename CHECK_LIST_COUNT
to CHECK_PCI_LIST_COUNT to mark explicitly what type of list it
is working with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The myInit() function is called before any of the test cases
because it prepares all internal structures for individual cases.
Well, if it fails there's no point in proceeding with testing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There is no restriction on maximum value of PCI domain. In fact,
Linux kernel uses plain atomic inc when assigning PCI domains:
drivers/pci/pci.c:static int pci_get_new_domain_nr(void)
drivers/pci/pci.c-{
drivers/pci/pci.c- return atomic_inc_return(&__domain_nr);
drivers/pci/pci.c-}
Of course, this function is called only if kernel was compiled
without PCI domain support or ACPI did not provide PCI domain.
However, QEMU still has the same restriction as us: in
set_pci_host_devaddr() QEMU checks if domain isn't greater than
0xffff. But one can argue that that's a QEMU limitation. We still
want to be able to cope with other hypervisors that don't have
this limitation (possibly).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's true that older QEMUs were not able to deal with PCI
domains, we don't support those versions anymore (see
4a42ece13a). Therefore it is safe to always format fully
expanded PCI address. Format PCI domain always as it will
simplify next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
readline-devel is an optional build dependency; when it is not
present, the output of 'virsh <<EOF ... EOF' is different in that the
input provided by the user is not echoed, and prompts become
interleaved on the same line as actual output, which in turn causes
the sed doing prompt filtering to mess up:
| ./virsh-snapshot
| --- exp 2019-07-31 18:42:31.107399428 -0300
| +++ out.cooked 2019-07-31 18:42:31.108399437 -0300
| @@ -1,8 +1,3 @@
| -
| -
| -Domain snapshot s3 created from 's3.xml'
| -Domain snapshot s2 created from 's2.xml'
| -Name: s2
| Domain: test
| Current: yes
| State: running
Maybe we should fix virsh in interactive mode to echo regardless of
whether readline-devel was used, but the quicker fix is to make the
test use 'virsh "..."' rather than reading its input from stdin.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The recently added test27 spawns commandhelper. This is fine,
except, one of the things that commandhelper does is it records
arguments it was spawn with into commandhelper.log. Other test
cases then use checkoutput() to compare the arguments against the
expected ones and also unlink() the log file. However, test27()
is not doing that and thus it leaves the file behind. This
breaks distcheck.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These test cases will start failing once the test driver provides
implementation for the virDomainGetCPUStats API.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The returned array of qemuMonitorJobInfo structs must be freed.
164 (16 direct, 148 indirect) bytes in 1 blocks are definitely lost in loss record 64 of 84
at 0x4A3568B: realloc (vg_replace_malloc.c:826)
by 0x4D888BD: virReallocN (viralloc.c:244)
by 0x4D889B3: virExpandN (viralloc.c:293)
by 0x4D88C87: virInsertElementsN (viralloc.c:435)
by 0x214004: qemuMonitorJSONGetJobInfo (qemu_monitor_json.c:9185)
by 0x148B3F: testQueryJobs (qemumonitorjsontest.c:2979)
by 0x14C192: virTestRun (testutils.c:174)
by 0x14BF36: mymain (qemumonitorjsontest.c:3286)
by 0x14E256: virTestMain (testutils.c:1096)
by 0x14BFD9: main (qemumonitorjsontest.c:3298)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Starting with QEMU 4.1, we're using the canonical feature names on the
command line and avoid aliases to prepare for possible deprecation of
all aliases in QEMU. But we do so only for features from our CPU map,
hyperv features defined in the code were unchanged and this patch fixes
it. Some features use "hv-" prefix unconditionally because they were
introduced recently enough to always support spelling with a dash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Earlier patches mentioned that the initial implementation will prevent
snapshots and checkpoints from being used on the same domain at once.
However, the actual restriction is done in this separate patch to make
it easier to lift that restriction via a revert, when we are finally
ready to tackle that integration in the future.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.
This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to virsh-snapshots. Provides decent coverage of the checkpoint
API, the test driver implementation, and the virsh access to the API.
A later patch will worry about testing that snapshots and checkpoints
are mutually exclusive (in part so it is easier to revert that when we
finally implement the interaction and lift that restriction).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.
Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag. We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch). But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema. If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.
Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepare for new checkpoint APIs by describing the XML that will
represent a checkpoint. The checkpoint XML is modeled heavily after
virDomainSnapshotPtr. See the docs for more details.
Add testsuite coverage for some minimal uses of the XML (bare minimum,
the sample from html, and a full dumpxml, and some counter-examples
that should fail schema validation). Although use of the REDEFINE flag
will require the <domain> subelement to be present, it is easier for
most of the tests to provide counterpart output produced with the
NO_DOMAIN flag (particularly since synthesizing a valid <domain>
during testing is not trivial).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix a potential memory leak by calling virCommandFree() in the cleanup
section.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Message-Id: <20190726205633.2041912-3-stefanb@linux.vnet.ibm.com>
Creating an 'exp' output file, but never comparing it against the
actual output, does not actually constitute testing the output. :)
Fixes: 280a2b41e
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a test case to commandtest.c to test the transfer of data to a
process who received the read-end of pipes' file descriptors. Transfer
large (128 kb) byte streams.
Extend the commandhelper.c with support for --readfd <fd> command line
parameter and convert the data receive loop to use poll and receive data
on multiple file descriptors (up to 3) and read data into distinct buffers
that we grow while adding more (string) data.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU command line does not change when TPM state is encrypted
compared to when it is plain.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a test case for the TPM XML encryption parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an already existing test case tpm-emulator-tpm2 to qemuxml2xmltest.c
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.
This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Add 4 disks to the blockjob-blockdev-in.xml test case to allow adding
data for block pull, block copy, block commit, and active block commit
jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
In case when the backing store can be represented with something
simpler such as a URI we can use it rather than falling back to the
json: pseudo-protocol.
In cases when it's not worth it (e.g. with the old ugly NBD or RBD
strings) let's switch to json.
The function is exported as we'll need it when overwriting the ugly
strings qemu would come up with during blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virsh-optparse test broke after commit 6ac402c456 because it
always assumed the max memory limit can be adjusted on a running domain
which used to be the case in the old code.
This is only a hot fix for the CI build. The proper fix here is to
re-write the whole test in a self-test/unit-test manner where we only
test virsh's ability to parse various values, not running actual
commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Changes noticed while copying to similar aspects of checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Any message that is easy to trigger (as evidenced by the testsuite
update) should not use 'internal error' as its category.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some VM configurations may result in a large number of threads created by
the associated qemu process which can exceed the system default limit. The
maximum number of threads allowed per process is controlled by the pids
cgroup controller and is set to 16k when creating VMs with systemd's
machined service. The maximum number of threads per process is recorded
in the pids.max file under the machine's pids controller cgroup hierarchy,
e.g.
$cgrp-mnt/pids/machine.slice/machine-qemu\\x2d1\\x2dtest.scope/pids.max
Maximum threads per process is controlled with the TasksMax property of
the systemd scope for the machine. This patch adds an option to qemu.conf
which can be used to override the maximum number of threads allowed per
qemu process. If the value of option is greater than zero, it will be set
in the TasksMax property of the machine's scope after creating the machine.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If the dup2 fails, then we aren't going to get the correct result.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Avoid the chance that qemuMonitorTestNewSimple could return NULL
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This adds detection of a Quobyte as a shared file system for live
migration.
Signed-off-by: Silvan Kaiser <silvan@quobyte.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.
This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test the output against the schema and also against what we expect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with blockjobs QEMU needs to reopen files in
read-write mode when modifying the backing chain. To achieve this we
need to use 'auto-read-only' for the backing files rather than the
normal 'read-only' property. That way qemu knows that the files need to
be reopened.
Note that the format drivers (e.g. qcow2) are still opened with the
read-only property enabled when being a member of the backing chain
since they are supposed to be immutable unless a block job is started.
QEMU v4.0 (since commit 23dece19da4) allows also dynamic behaviour for
auto-read-only which allows us to use sVirt as we only grant write
permissions to files when doing a blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add testing of the host specification part so that we can be sure that
no image/host specific data will be present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting new qcow2 images we need to provide the backing store
string which should not contain any authentication or irrelevant data.
Add a flag for qemuBlockStorageSourceGetBackendProps which allows to
skip the irrelevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs. Since we'll need to be able to attempt to cancel
jobs which potentially were not started (during reconnect) the 'quiet'
flag allows to suppress errors reported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API for generic jobs.
The dismiss command is meant to remove a concluded job after we were
able to get the final status.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the delayed dismiss of the job so that we can reap the state
even if libvirtd was not running when qemu emitted the job completion
event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base and top of the 'commit'
operation, allow specifying explicit job name and add support for
delayed dismiss of the job so that we can reap the state even if
libvirtd was not running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base of the 'stream' operation,
allow specifying explicit job name and add support for delayed dismiss
of the job so that we can reap the state even if libvirtd was not
running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the existing fs9p.xml and fs9p-ccw.xml to run the tests
with latest caps on x86_64 and s390x.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Test if our parsing of interface stats as returned by ovs-vsctl
works as expected. To achieve this without having to mock
virCommand* I'm separating parsing of stats into a separate
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On Debian derived distros "localhost" can resolve to the normal
"127.0.0.1" and "::1", but it can also resolve to "127.0.1.1"
Rewrite the code so that it doesn't assume a fixed number of IPs.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ideally, a software that's translating domain names would iterate
over all addresses the NSS returned, but some software does not
bother (e.g. ping). What happens is that for instance when
installing a guest, it's assigned one IP address but once it's
installed and rebooted it gets a different IP address (because
client ID used for the first DHCP traffic when installing the
guest was generated dynamically and never saved so after reboot
the guest generated new ID which resulted in different IP address
to be assigned). This results in 'ping $domain' not working
properly as it still pings the old IP address. Well, it might -
NSS plugin does not guarantee any order of addresses.
To resolve this problem, we can sort the array just before
returning it to the caller (ping) so that the newer IP addresses
come before older ones.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.
NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Check whether qemu supports the bochs-display device and set a
capability. Update tests.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The code to check whether a redefined snapshot/checkpoint XML is
attempting to create a cycle in the list of moments is lengthy, and
common between the two types of list. Therefore, it belongs in the
shared base file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
With systemd activation the passed in file descriptors are required to
be numbered from STDERR_FILENO + 1 onwards. The unit tests thus require
FDs 3, 4 and 5 to be available.
This may not be the case in all environments in which the tests run. For
example on RHEL7 it was seen that a library constructor (gcrypt probably)
opens /dev/urandom and leaves the file handle open. This means FD 3 is
not available and the activation tests fail.
The best way to deal with this would be to create a standalone helper
program for the tests, but that's much more work than just skipping the
tests if we notice we have the problem.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only use of this code was removed by:
commit be78814ae0
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Thu Apr 2 14:41:17 2015 +0200
virNetSocketNewConnectUNIX: Use flocks when spawning a daemon
less than a year after it was first introduced in
commit 1b807f92db
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Wed Jul 16 08:00:19 2014 +0200
rpc: pass listen FD to the daemon being started
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the socket code will unlink any UNIX socket path which is
associated with a server socket. This is not fine grained enough, as we
need to avoid unlinking server sockets we were passed by systemd.
To deal with this we must explicitly track whether each socket needs to
be unlinked when closed, separately of the client vs server state.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When receiving multiple FDs from systemd during service activation it is
neccessary to identify which purpose each FD is used for. While this
could be inferred by looking for the specific IP ports or UNIX socket
paths, this requires the systemd config to always match what is expected
by the code. Using systemd FD names we can remove this restriction and
simply identify FDs based on an arbitrary name.
The FD names are passed by systemd in the LISTEN_FDNAMES env variable
which is populated with the socket unit file names, unless overriden
by using the FileDescriptorName setting.
This is supported since the system 227 release and unfortunately RHEL7
lacks this version. Thus the code has some back compat support whereby
we look at the TCP ports or the UNIX socket paths to identify what
socket maps to which name. This back compat code is written such that
is it easly deleted when we are able to mandate newer systemd.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 035db37394
Even though we only allow using RBD with raw volumes,
removing the options and the default format causes our
parser not to fill out the volume format and the backend code
rejects creating a non-raw volume.
Re-introduce the volume options to fix volume creation while
erroring out on requests to use non-raw formats.
https://bugzilla.redhat.com/show_bug.cgi?id=1724065
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Way back in the past, the "no_tty=1" option was added for the remote
driver to disable local password prompting by disabling use of the local
tty:
commit b32f429849
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 21 20:17:09 2007 +0000
Added a no_tty param to remote URIs to stop SSH prompting for password
This was done by adding "-T -o BatchMode=yes -e none" args to ssh. This
achieved the desired results but is none the less semantically flawed
because it is mixing up config parameters for the local tty vs the
remote tty.
The "-T" arg stops allocation of a TTY on the remote host. This is good
for all libvirt SSH tunnels as we never require a TTY for our usage
model, so we should have just passed this unconditionally.
The "-e none" option disables the escape character for sessions with a
TTY. If we pass "-T" this is not required, but it also not harmful to
add it, so we should just pass it unconditionally too.
Only the "-o BatchMode=yes" option is related to disabling local
password prompts and thus needs control via the no_tty URI param.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For quite some time now it is impossible to connect to a domain
using a HMP monitor, so there is no point in formatting it in the status
XML.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We've been doing a terrible job of performing XML validation in our
various API that parse XML with a corresponding schema (we started
with domains back in commit dd69a14f, v1.2.12, but didn't catch all
domain-related APIs, didn't document the use of the flag, and didn't
cover other XML). New APIs (like checkpoints) should do the validation
unconditionally, but it doesn't hurt to continue retrofitting existing
APIs to at least allow the option.
While there are many APIs that could be improved, this patch focuses
on wiring up a new snapshot XML creation flag through all the
hypervisors that support snapshots, as well as exposing it in 'virsh
snapshot-create'. For 'virsh snapshot-create-as', we blindly set the
flag without a command-line option, since the XML we create from the
command line should generally always comply (note that validation
might cause failures where it used to succeed, such as if we tighten
the RNG to reject a name of '../\n'); but blindly passing the flag
means we also have to add in fallback code to disable validation if
the server is too old to understand the flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When only geteuid() is mocked, the test crashes on Debian 10.
Fatal: failed to reset uid: No such file or directory
Program received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) t a a bt
Thread 1 (Thread 0x7ffff3b3e080 (LWP 12003)):
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007ffff7798535 in __GI_abort () at abort.c:79
#2 0x00007ffff485ca20 in _gcry_logv (level=level@entry=40, fmt=fmt@entry=0x7ffff4929126 "failed to reset uid: %s\n", arg_ptr=arg_ptr@entry=0x7fffffffe4a0) at ../../src/misc.c:142
#3 0x00007ffff485cd61 in _gcry_log_fatal (fmt=fmt@entry=0x7ffff4929126 "failed to reset uid: %s\n") at ../../src/misc.c:218
#4 0x00007ffff48639d1 in lock_pool_pages (n=<optimized out>, p=<optimized out>) at ../../src/secmem.c:340
#5 _gcry_secmem_init_internal (n=<optimized out>) at ../../src/secmem.c:563
#6 0x00007ffff4863d78 in _gcry_secmem_init (n=4096) at ../../src/secmem.c:581
#7 0x00007ffff485e4e6 in _gcry_vcontrol (cmd=<optimized out>, arg_ptr=arg_ptr@entry=0x7fffffffe5e0) at ../../src/global.c:506
#8 0x00007ffff485a789 in gcry_control (cmd=cmd@entry=GCRYCTL_INIT_SECMEM) at ../../src/visibility.c:79
#9 0x00007ffff71af10f in ssh_crypto_init () at ./src/libgcrypt.c:621
#10 0x00007ffff7193796 in _ssh_init (constructor=constructor@entry=1) at ./src/init.c:79
#11 0x00007ffff71834de in libssh_constructor () at ./src/init.c:116
#12 0x00007ffff7fe437a in call_init (l=<optimized out>, argc=argc@entry=1, argv=argv@entry=0x7fffffffe778, env=env@entry=0x7fffffffe788) at dl-init.c:72
#13 0x00007ffff7fe4476 in call_init (env=0x7fffffffe788, argv=0x7fffffffe778, argc=1, l=<optimized out>) at dl-init.c:30
#14 _dl_init (main_map=0x7ffff7ffe190, argc=1, argv=0x7fffffffe778, env=0x7fffffffe788) at dl-init.c:119
#15 0x00007ffff7fd60ca in _dl_start_user () from /lib64/ld-linux-x86-64.so.2
#16 0x0000000000000001 in ?? ()
#17 0x00007fffffffea26 in ?? ()
#18 0x0000000000000000 in ?? ()
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we no longer support sexpr conversion to the internal config we
can drop the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was the only place calling 'xenFormatSxpr'. Drop it as there
are no other users of that code since we've dropped xend support in
commit 1dac5fbbbb.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it obvious that the domainsnapshotxml2xml test is only run when
compiling in support for qemu.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The qemusecuritytest is failing on FreeBSD 11/12, reporting that files
are not correctly restored. Debugging code printfs show that the
virFileGetXAttrQuiet mock is returning 0, but the virFileGetXAttr
function is seeing -1 as the return value.
Essentially there appears to be some kind of optimization between the
real virFileGetXAttrQuiet and the real virFileGetXAttr, which breaks
when we mock virFileGetXAttrQuiet. Rather than trying to figure out
how to avoid this, it is simpler to just mock virFileGetXAttr too
since it is very short code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are probably more situations where they could be taken
advantage of, but these are very obvious scenarios because we
either manage to get rid of a bunch of explicit capabilities,
or we make a bunch of related test cases all use the macros
by switching the only odd one out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we have macros such as DO_TEST_CAPS_LATEST_PARSE_ERROR()
and DO_TEST_CAPS_ARCH_VER(), but there is no concise way to say
"using this version of QEMU on this architecture will result in a
failure".
This commit adds
DO_TEST_CAPS_ARCH_LATEST_FAILURE()
DO_TEST_CAPS_ARCH_VER_FAILURE()
DO_TEST_CAPS_ARCH_LATEST_PARSE_ERROR()
DO_TEST_CAPS_ARCH_VER_PARSE_ERROR()
and reworks
DO_TEST_CAPS_LATEST_FAILURE()
DO_TEST_CAPS_LATEST_PARSE_ERROR()
to use the corresponding DO_CAPS_TEST_ARCH_*() macros instead of
using DO_TEST_CAPS_ARCH_LATEST_FULL() directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It mirrors the existing DO_TEST_CAPS_ARCH_LATEST_FULL(), and is
now used to implement DO_TEST_CAPS_ARCH_VER().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure the order is consistent between xml2argv and xml2xml,
and make room for more macros that are going to be introduced
shortly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This effectively reverts d7420430ce and adds new code.
Here is the problem: Imagine a file X that is to be shared
between two domains as a disk. Let the first domain (vm1) have
seclabel remembering turned on and the other (vm2) has it turned
off. Assume that both domains will run under the same user, but
the original owner of X is different (i.e. trying to access X
without relabelling leads to EPERM).
Let's start vm1 first. This will cause X to be relabelled and to
gain new attributes:
trusted.libvirt.security.ref_dac="1"
trusted.libvirt.security.dac="$originalOwner"
When vm2 is started, X will again be relabelled, but since the
new label is the same as X already has (because of vm1) nothing
changes and vm1 and vm2 can access X just fine. Note that no
XATTR is changed (especially the refcounter keeps its value of 1)
because the vm2 domain has the feature turned off.
Now, vm1 is shut off and vm2 continues running. In seclabel
restore process we would get to X and since its refcounter is 1
we would restore the $originalOwner on it. But this is unsafe to
do because vm2 is still using X (remember the assumption that
$originalOwner and vm2's seclabel are distinct?).
The problem is that refcounter stored in XATTRs doesn't reflect
the actual times a resource is in use. Since I don't see any easy
way around it let's just not store original owner on shared
resources. Shared resource in world of domain disks is:
- whole backing chain but the top layer,
- read only disk (we don't require CDROM to be explicitly
marked as shareable),
- disk marked as shareable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some paths will not be restored. Because we can't possibly know
if they are still in use or not. Reflect this in the test so that
we can test more domains. Also see next commit for more detailed
explanation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The way that security drivers use XATTR is kind of verbose. If
error reporting was left for caller then the caller would end up
even more verbose.
There are two places where we do not want to report error if
virFileGetXAttr fails. Therefore virFileGetXAttrQuiet is
introduced as an alternative that doesn't report errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Having to enumerate all capabilities that we want domain to have
is too verbose and prevents us from adding more tests. Have the
domain always have the latest x86_64 capabilities. This means
that we have to drop two arm tests, but on the other hand, I'm
introducing 50 new cases. I've listed 50 biggest .args files and
added those:
libvirt.git $ ls -Sr $(find tests/qemuxml2argvdata/ \
-type f -iname "*.x86_64-latest.args") | tail -n 50
Except for two:
1) disk-backing-chains-noindex - this XML has some disks with
backing chain. And since set is done on the whole backing chain
and restore only on the top layer this would lead to instant test
failure. Don't worry, secdrivers will be fixed shortly too and
the test case will be added.
2) hostdev-mdev-display-spice-egl-headless - for this XML
secdriver tries to find IOMMU group that mdev lives in. Since we
are not mocking sysfs access this test case would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This simplifies the code a bit and removes the need for cleanup
label in one case. In the other case the label is kept because
it's going to be used later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @securityManager variable in testDomain() is unused. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with current approach is that if
qemuSecuritySetAllLabel() fails, then the @chown_paths and
@xattr_paths hash tables are not freed and preserve values
already stored there into the next test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I don't really know what happened when I was writing the original
code, but even if error was to be set the corresponding boolean
was set to false meaning no error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One of the functions of this mock is that it spoofs chown() and
stat() calls. But it is doing so in a clever way: it stores the
new owner on chown() and reports it on subsequent stat(). This is
done by using a 32bit unsigned integer where one half is used to
store uid the other is for gid. Later, when stat() is called the
integer is fetched and split into halves again. Well, my bit
operation skills are poor and the code I've written does not do
that properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This test is beautiful. It checks if we haven't messed up
refcounting on security labels (well, XATTRs where the original
owner is stored). It does this by setting up tracking of XATTR
setting/removing into a hash table, then calling
qemuSecuritySetAllLabel() followed by immediate
qemuSecurityRestoreAllLabel() at which point, the hash table must
be empty. The test so beautifully written that no matter
what you do it won't fail. The reason is that all seclabel work
is done in a child process. Therefore, the hash table in the
parent is never changed and thus always empty.
There are two reasons for forking (only one of them makes sense
here though):
1) namespaces - when chown()-ing a file we have to fork() and
make the child enter desired namespace,
2) locking - because of exclusive access to XATTRs we lock the
files we chown() and this is done in a fork (see 207860927a for
more info).
While we want to fork in real world, we don't want that in a test
suite. Override virProcessRunInFork() then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.
This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for this has only relatively recently been added to
virt-manager.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the latest virt-manager to regenerate the files.
The command line is once again along the lines of
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics (none|vnc) \
--print-xml
with some minor tweaks performed afterwards.
This removes a number of inconsistencies between the files,
and makes it so the only differences are actually relevant
either to the architecture and machine type at hand, or to
having graphics rather than being headless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now *-headless and *-graphics tests are using different
quoting styles, which results in the diff between them being
basically useless, whereas we would like it to be possible to
compare these files directly and easily spot the differences.
Convert all *-graphics tests to single quotes, which is the
style libvirt itself uses when formatting XML: this is a fact
that will come in handy later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.
A netfs pool with:
<source>
<host name='10.20.30.40'/>
<dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.
Sanitize the source dir as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1723247
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Show that the capability tweaking stuff works by enabling blockdev in
the 'qemu-ns' test even in versions where it's not yet fully supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the DO_TEST_CAPS_LATEST/VER infrastructure to run a more modern
version of this and also fork it to a pre-blockdev version so that we
can check the qemu namespace capability tweaking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly how we allow adding arbitrary command line arguments and
environment variables this patch introduces the ability to control
libvirt's perception of the qemu process by tweaking the capability bits
for testing purposes.
The idea is to allow developers and users either test a new feature by
enabling it early or disabling it to see whether it introduced
regressions.
This feature is not meant for production use though, so users should
handle it with care.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we added the seclabels to the schema we can test that they are
parsed and formatted correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow using seclabels the same way as disk images allow it. Currently
the snapshot code copies the seclabels from the original image if no
seclabel is provided. Also there's no code change required as the
snapshot XML parser actually uses parts of the disk parser thus
seclabels are already parsed and formatted and even applied thus this is
just a formalization of our support for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With QEMU versions which lack "unavailable-features" we use CPUID based
detection of features which were enabled or disabled once QEMU starts.
Thus using MSR features with host-model would result in all of them
being marked as disabled in the active domain definition even though
QEMU did not actually disable them.
Let's make sure we add MSR features to host-model only when
"unavailable-features" property is supported by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always assume JSON monitor was requested, since all the callers
pass true anyway.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
No reason not to be consistent with the user-visible value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test case shows that we now reject invalid spapr-vio
addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer use that functionality we can also drop the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that we no longer support testing HMP monitor,
the json field is pointless.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We return success when running this function for either non-JSON monitor
testing or guest agent testing.
However we no longer test HMP monitor and we do not try to validate
the guest agent interaction.
Drop the test->json check and report a proper error if someone tries
to run this function for the guest agent without properly wiring it up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The QMP monitor only uses a newline to separate lines,
while HMP and the guest agent also use a carriage return.
In preparation to dropping support for testing HMP interaction,
only skip the carriage return if we're dealing with the guest agent,
removing the need to check the 'json' field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Update the capabilities from a non-upstream version (9c70209b63 is not
in qemu.git) to qemu upstream commit 33d6099906 (2019/06/18) so that we
get the QMP schema 'features' field support and are able to detect that
the 'file' block backend supports dynamic auto-read-only.
Note that I've rebuilt this on a machine with a more modern kernel and
microcode which exposes e.g. the recent CPU bug mitigations, thus I
opted to keep the CPU changes rather than trying to do a franken-caps
by updating only the output of query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default query-cpu-model-expansion only reports canonical names of all
CPU features. We do some magic and call the command twice to get all
possible spellings of the features, but being able to consume canonical
names will allow us to drop this magic.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we call query-cpu-model-expansion will rely on some capabilities
bits. Let's make sure all capabilities are set before probing host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use it to check whether QEMU supports a specific CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This should cover all CPU features for which QEMU prefers spelling that
differs from the one used by libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Newer QEMU will translate the feature names to their canonical names so
4.0.0 is the last one which produces the results we currently have in
*-latest.args.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normal CPU features use modern -cpu ...,feature=on|off syntax when
available, but kvm features kept using the old +feature or -feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These test check all kvm CPU features that could be passed to the -cpu
option by libvirt.
The 2.7.0 version is the last one for which we use +|-feature syntax for
CPU features, while feature=on|off is used with newer versions. This
is visible in the following patch which changes only the *-latest.args
files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is no obvious benefit in putting the escaped message
back into msg while tmp holds the original message.
Remove the assignment and use 'tmp' directly'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that all the callers call qemuMonitorTestNew with json=true,
remove the argument and always assume JSON.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The only user of the qemuMonitorTestNewSimple macro is using JSON.
Always pass 'true' to qemuMonitorTestNew and remove the 'json'
argument.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
At this point, all test programs that use qemu_LDADDS also
use LDADDS, so we can remove a bunch of repetition by simply
including the latter in the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We optionally include QEMU and LXC support in this test and
depending on which is enabled (if either is enabled at all) we
need to link in different objects.
Right now we implicitly depend on the fact that qemu_LDADDS is
empty when QEMU is not enabled to get the correct set of objects,
but it's better to be explicit about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We want all test programs using qemu_LDADDS to also use LDADDS,
and cputest is the only existing exception.
We can't just replace GNULIB_LIBS with LDADDS though, even though
the latter is a superset of the former, because that would result
in a linking error due to including the same object twice:
/usr/bin/ld:
../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
multiple definition of `libvirt_object_new_semaphore';
../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
first defined here
To work around this, we include both qemu_LDADDS and LDADDS when
QEMU support is enabled, and just LDADDS otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When specifying extra params for spcie TLS verification, it's necessary
to pass a weird URI to it. Let's add a test for this case where the TLS
string contains a space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Determine whether the test has failed after running all the cases so
that we don't need to rerun it multiple times to see all problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_TEST_VERBOSE instead. This fixes the following syntax check
problem:
tests/qemumonitorjsontest.c:1409: virReportError(VIR_ERR_INTERNAL_ERROR, "arr should have been cleared");
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups. Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support. Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).
Existing code is not affected by the new capabilities.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.
Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Time to remove the cleanup labels rendered useless in the previous
patch. There are still plenty of other tests that could be further
simplified, but I've already spent enough time in this file for now.
Signed-off-by: Eric Blake <eblake@redhat.com>
The DO_TEST() macro in qemumonitorjsontest.c was not passing the
schema through, which meant that we were not validating any of those
tests for correct usage according to the schema.
In the process of mechanically altering tests to pass the schema
through, use VIR_AUTOPTR on all of the affected test instances. The
next patch will do some further cleanups that it exposes.
Tested by using this hack, where the test mistakenly passed pre-patch,
but correctly diagnosed the garbage post-patch:
| diff --git i/src/qemu/qemu_monitor_json.c w/src/qemu/qemu_monitor_json.c
| index 53a7de8b77..86d8450814 100644
| --- i/src/qemu/qemu_monitor_json.c
| +++ w/src/qemu/qemu_monitor_json.c
| @@ -1532,7 +1532,8 @@ qemuMonitorJSONGetStatus(qemuMonitorPtr mon,
| if (reason)
| *reason = VIR_DOMAIN_PAUSED_UNKNOWN;
|
| - if (!(cmd = qemuMonitorJSONMakeCommand("query-status", NULL)))
| + if (!(cmd = qemuMonitorJSONMakeCommand("query-status",
| + "s:garbage", "foo", NULL)))
| return -1;
|
| if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Simplify the GEN_TEST_FUNC() and target of the DO_TEST_SIMPLE() macros
by using autoptr support.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Upcoming tests are going to use VIR_AUTOPTR to simplify test cleanup.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Pass in the schema since it works with the 'file' test now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pass in the schema data from the caller if QMP schema testing is
desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In case when we are testing a QMP command we can try to schema check it
so that we catch inconsistencies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
