The BIOS serial console output is currently implemented using the QEMU
'sga' device, but this is going to change in future patches, so the
error message ought to be more generically phrased.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <bios useserial='yes'> config results in use of the '-device sga'
QEMU options. This in turn causes QEMU go load the sgabios.bin option
ROM, which contains x86 machine code. This cannot work on non-x86
arches, thus we should block the bad config.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Setup of a disk with <transient shareBacking='yes'/> option issues a
reset of qemu. In cases when QEMU didn't yet support the 'set-action'
QMP libvirt would in certain cases setup the commandline without
'-no-shutdown' which caused qemu to exit during startup. Forbid this
specific scenario.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'preserve' action.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'rename-restart' action.
At this point the following handling would take place:
'on_reboot' set to 'rename-restart' is ignored on guest-initiated
reboots, the guest simply reboots.
For on_poweroff set to 'rename-restart' the following happens:
guest initiated shutdown -> 'destroy'
libvirt initiated shutdown -> 'reboot'
In addition when 'on_reboot' is 'destroy' in addition to 'on_poweroff'
being 'rename-restart' the guest is able to execute instructions after
issuing a reset before libvirt terminates it. This will be addressed
separately later.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All currently supported qemu versions support all throttling
capabilities. It is unlikely that any of the fields will be removed in
the future and if it will we will need to do specific probing which is
possible via the 'throttle' object which is the replacement for the
legacy way to configure throttling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When SEV is not supported but specified in the domain XML by a user it
should not result in an internal error (VIR_ERR_INTERNAL_ERROR)
therefore switching to XML error (VIR_ERR_CONFIG_UNSUPPORTED).
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding virDomainSecDef for general launch security data
and moving virDomainSEVDef as an element for SEV data.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IOThreads are supported with all 3 currently supported buses which can
have virtio devices (PCI, CCW, MMIO) , so there's no need for this check.
Additionally this check was buggy in the current location as on e.g.
hotplug cases the address may not yet be assigned for the disk and thus
a bogus error would be printed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1970277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_S390 can never be asserted any more, add an explicit
check that will reject the 'virtio-s390' address type and remove the
code which would auto-fill them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The devices virtio-gpu-gl-pci and virtio-vga-gl, aimed to replace the
virgl property, are valid for 3d accerlation as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement this behaviour by skipping the disks on traditional
commandline and hotplug them before resuming CPUs. That allows to use
the support for hotplugging of transient disks which inherently allows
sharing of the backing image as we open it read-only.
This commit implements the validation code to allow it only with buses
supporting hotplug and the hotplug code while starting up the VM.
When we have such disk we need to issue a system-reset so that firmware
tables are regenerated to allow booting from such device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The "machine-loadparm-multiple-disks-nets-s390" case now requires the
QEMU_CAPS_CCW feature to pass validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported QEMU versions and there isn't a
more elegant way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is no longer asserted. Remove the checks related to it and
make the code work properly with QEMU_CAPS_DEVICE_INTEL_IOMMU.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This makes it possible to enable stable NIC device names in most modern
Linux distros.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A VM defined similar to:
...
<features><kvm><hint-dedicated state='on'/></kvm></features>
<cpu mode="host-model"/>
...
is currently invalid, as hint-dedicated is only allowed if cpu mode
is host-passthrough or maximum. This restriction is unnecessary, see
https://bugzilla.redhat.com/show_bug.cgi?id=1857671
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
To make it easier to split out the parsing/formatting of the <teaming>
element into separate functions (so we can more easily add the
<teaming> element to <hostdev>, change its virDomainNetDef so that it
points to a virDomainNetTeamingInfo rather than containing one.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
TPM devices with model='tpm-tis' are only valid with x86 and aarch64
virt machines. Add a check to qemuValidateDomainDeviceDefTPM() to
ensure VIR_DOMAIN_TPM_MODEL_TIS is only used with these architectures.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The "max" model can be treated the same way as "host" model in general.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For hardware virtualization this is functionally identical to the
existing host-passthrough mode so the same caveats apply.
For emulated guest this exposes the maximum featureset supported by
the emulator. Note that despite being emulated this is not guaranteed
to be migration safe, especially if different emulator software versions
are used on each host.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Implements QEMU support for vhost-user-blk together with live
hotplug/unplug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Make the function reusable by other vhost-user based devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time
Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:
<vsock model='virtio'>
<cid auto='no' address='3'/>
<driver iommu='on'/>
</vsock>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In v6.8.0-27-g88957116c9 and friends I've switched the way the
default RAM is specified for QEMU (from plain -m to
memory-backend-*). This means, that even if a guest doesn't have
any NUMA nodes configured we can use memory-backend-* attributes
to translate user config requests. For instance, we can allow
memory to be shared (<access mode='shared'/> under
<memoryBacking/>). But what my original commits are missing is
allowing such configuration in our validator.
Fixes: 88957116c9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839034#c12
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The validation callback always fetched a fresh copy of 'qemuCaps' to use
for validation which is wrong in cases when the VM is already running,
such as device hotplug. The newly-fetched qemuCaps may contain flags
which weren't originally in use when starting the VM e.g. on a libvirtd
upgrade.
Since the post-parse/validation machinery has a per-run 'parseOpaque'
field filled with qemuCaps of the actual process we can reuse the caps
in cases when we get them.
The code still fetches a fresh copy if parseOpaque doesn't have a
per-run copy to preserve existing functionality.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The validation callbacks always fetch latest qemuCaps so it won't ever
be NULL. Remove the tautological conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDefPostParse infrastructure has apart from the global opaque
data also per-run data, but this was not duplicated into the validation
callbacks.
This is important when drivers want to use correct run-state for the
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the @qemuCaps argument in
qemuDomainDefValidateMemoryHotplug() is unused and thus doesn't
need to be passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is this function qemuDomainDefValidateMemoryHotplug() which
is called explicitly from hotplug path and the qemu's domain def
validator. This is not really necessary because we can move the
part that validates feature against qemuCaps into device
validator which is called implicitly (from qemu driver's POV).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
This macro checks whether given number is an integer power of
two. At the same time, I've identified two places where we check
for pow2 and I'm replacing them with the macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
but not sparc64. Note that it has the fixed alias "scsi", which differs
from our normal naming convention of "scsi0".
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to previous commits, we can utilize domCaps to check if
graphics type is supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of 5216304bfe I've moved RNG model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate RNG model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported RNG models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of a33279daa8 I've moved video model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate video model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported video models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that nothing uses virDomainCapsDeviceDefValidate() it can be
removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain RNG model has to be validated in
qemuValidateDomainRNGDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the function to qemuValidateDomainVCpuTopology() to reflect
what it is currently doing as well.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
...if a machine memory-backend using shared memory is configured for
the guest. This is especially important for QEMU machine types that
don't have NUMA but virtiofs support.
An example snippet:
<domain type='kvm'>
<name>test</name>
<memory unit='KiB'>2097152</memory>
<memoryBacking>
<access mode='shared'/>
</memoryBacking>
<devices>
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/tmp/test'/>
<target dir='coffee'/>
</filesystem>
...
</devices>
...
</domain>
and the corresponding QEMU command line:
/usr/bin/qemu-system-s390x \
-machine s390-ccw-virtio-5.2,memory-backend=s390.ram \
-m 2048 \
-object
memory-backend-file,id=s390.ram,mem-path=/var/lib/libvirt/qemu/ram/46-test/s390.ram,share=yes,size=2147483648 \
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables the free-page-reporting in qemu.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the validation of transient disk option. We support transient
disks in qemu under the following conditions:
- -blockdev is used
- the disk source is a local file
- the disk type is 'disk'
- the disk is not readonly
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce 'isa' controller type. In domain XML it looks this way:
...
<controller type='isa' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01'
function='0x0'/>
</controller>
...
Currently, this is needed for the bhyve driver to allow choosing a
specific PCI address for that. In bhyve, this controller is used to
attach serial ports and a boot ROM.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since QEMU 1.5.3, the ib700 watchdog device has no options for address,
and not address in device tree:
$ /usr/libexec/qemu-kvm -version
QEMU emulator version 1.5.3 (qemu-kvm-1.5.3-175.el7), Copyright (c) 2003-2008 Fabrice Bellard
$ /usr/libexec/qemu-kvm -device ib700,\?
$ virsh qemu-monitor-command seabios --hmp info qtree|grep ib700 -A 2
dev: ib700, id "watchdog0"
dev: isa-serial, id "serial0"
index = 0
So only allow it to use none address.
Fixes: 8a54cc1d08
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509908
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt currently silently allows <timer name="kvmclock"/> and some
other timer tags in the guest XML definition for timers that do not
exist on non-x86 systems. We should not silently ignore these tags
since the users might not get what they expected otherwise.
Note: The error is only generated if the timer is marked with
present="yes" - otherwise we would suddenly refuse XML definitions
that worked without problems before.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1754887
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When editing a domain with hotplug enabled, I removed the only
NUMA node it had and got no error. I got the error later though,
when starting the domain. This is not as user friendly as it can
be. Move the validation call out from command line generator and
into domain validator (which is called prior to starting cmd line
generation anyway).
When doing this, I had to remove memory-hotplug-nonuma xml2xml
test case because there is no way the test case can succeed,
obviously.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new device element "<audio>" which allows
to map guest sound device specified using the "<sound>"
element to specific audio backend.
Example:
<sound model='ich7'>
<audio id='1'/>
</sound>
<audio id='1' type='oss'>
<input dev='/dev/dsp0'/>
<output dev='/dev/dsp0'/>
</audio>
This block maps to OSS audio backend on the host using
/dev/dsp0 device for both input (recording)
and output (playback).
OSS is the only backend supported so far.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add 'ich7' sound model. This is a preparation for sound support in
bhyve, as 'ich7' is the only model it supports.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The firmware (SLOF) on QEMU for ppc64 does not support TPM 1.2, so
prevent the choice of TPM 1.2 when the SPAPR device model is chosen
and use a default of '2.0' (TPM 2) for the backend.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move setting the TPM default version out of the validation function into
the post parse function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To make the code future proof, the rest of the
qemuValidateDomainDeviceDefAddress() has to be executed (even
though there is nothing there yet) instead of returning directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The ZPCI device validation is specific to qemu. So, let us move the
ZPCI uid validation out of domain xml parsing into qemu domain device
validation.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Previous patch handled the conversion of def->tpm to the
array def->tpms and the XML parsing logic. This patch handles
the validations needed to ensure the intended behavior.
The existing qemuValidateDomainDeviceDefTPM() function was updated
to guarantee that the VIR_DOMAIN_TPM_MODEL_SPAPR_PROXY model is
exclusive to PPC64 guests and to the VIR_DOMAIN_TPM_TYPE_PASSTHROUGH
backend.
A new function called qemuDomainDefTPMsPostParse() was added to guarantee
that the following combinations in the same domain are valid:
- a single TPM device
- a single TPM Proxy device
- a single TPM + single TPM Proxy devices
And these combinations in the same domain are NOT valid:
- 2 or more TPM devices
- 2 or more TPM Proxy devices
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are recommendations and limitations to the name of the
config blobs we need to follow [1].
We don't want users to change any value only add new blobs. This
means, that the name must have "opt/" prefix and at the same time
must not begin with "opt/ovmf" nor "opt/org.qemu" as these are
reserved for OVMF or QEMU respectively.
1: docs/specs/fw_cfg.txt from qemu.git
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is not yet supported by virtiofsd.
Fixes#23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Availability of the vmpvscsi controller model is gated by the pvscsi
capability.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Any non-raw block layer feature will not work with raw SCSI command
passthrough via 'scsi-block'. Explicitly refuse use of luks encryption,
storage slices and copy on read.
https://bugzilla.redhat.com/show_bug.cgi?id=1820040
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.
This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.
We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.
This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.
Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SD cards need to be instantiated via -drive if=sd. This means that all
cases where we use the blockdev path need to be special-cased for SD
cards.
Note that at this point QEMU_CAPS_BLOCKDEV is still cleared if the VM
config has a SD card.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.
Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Agregate validation of frontend properties in a new function called
qemuValidateDomainDeviceDefDiskFrontend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move capability validation of virtio options from command line
generation to post-parse device validation where it belongs.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.
<features>
<xen>
<e820_host state='on'/>
</xen>
</features>
e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in v1.2.17-rc1~121, the assumption was that the
driver->privileged is immutable at the time but it might change
in the future. Well, it did not ever since. It is still immutable
variable. Drop the needless accessor then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all its helper functions are in qemu_validate.c, we can
move the function itself. The helpers can become static again since
they're all in the same file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This will allow to move qemuDomainDeviceDefValidate() itself in
the next patch in a cleaner way.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the function and all its static helper functions.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This function alone requires other 3 static functions to be
moved as well, thus let's move it in its own patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuDomainChrDefValidate() has a lot of static helpers functions
that needed to be moved as well.
Other functions from qemuDomainDeviceDefValidate() that were
also moved:
- qemuValidateDomainSmartcardDef
- qemuValidateDomainRNGDef
- qemuValidateDomainRedirdevDef
- qemuValidateDomainWatchdogDef
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The next big task is to move qemuDomainDeviceDefValidate() to
qemu_validation.c, which is a function that calls a lot of
other static helper functions. This patch starts it by moving
qemuDomainDeviceDefValidateAddress().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the static functions qemuDomainValidateDef() uses, as well as
qemuDomainValidateDef() itself to qemu_validate.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
