Commit b0f8546 broke the build on mingw, by exposing code that
had Linux-specific dependencies but which was previously protected
by libnuma ifdef guards:
make[3]: Entering directory `/home/eblake/libvirt-tmp/build/src'
CC libvirt_driver_la-nodeinfo.lo
../../src/nodeinfo.c: In function 'virNodeGetSiblingsList':
../../src/nodeinfo.c:1543:30: error: 'SYSFS_THREAD_SIBLINGS_LIST_LENGTH_MAX' undeclared (first use in this function)
if (virFileReadAll(path, SYSFS_THREAD_SIBLINGS_LIST_LENGTH_MAX, &buf) < 0)
^
../../src/nodeinfo.c:1543:30: note: each undeclared identifier is reported only once for each function it appears in
../../src/nodeinfo.c: In function 'virNodeCapsFillCPUInfo':
../../src/nodeinfo.c:1562:5: error: implicit declaration of function 'virNodeGetCpuValue' [-Werror=implicit-function-declaration]
if ((tmp = virNodeGetCpuValue(SYSFS_CPU_PATH, cpu_id,
^
../../src/nodeinfo.c:1562:5: error: nested extern declaration of 'virNodeGetCpuValue' [-Werror=nested-externs]
../../src/nodeinfo.c:1562:35: error: 'SYSFS_CPU_PATH' undeclared (first use in this function)
if ((tmp = virNodeGetCpuValue(SYSFS_CPU_PATH, cpu_id,
^
cc1: all warnings being treated as errors
* src/nodeinfo.c (virNodeCapsFillCPUInfo): Make conditional.
(virNodeGetSiblingsList): Move into #ifdef linux block.
Signed-off-by: Eric Blake <eblake@redhat.com>
The function was called in a single place only and was reporting errors
that were later ignored. Use the virNumaGetNodeMemory helper to get the
size of the memory in the NUMA node and remove the helper
HW_PHYSMEM is available on Mac OS X as well as FreeBSD, however,
its resulting value for Mac OS X is 32 bits. Mac OS X provides
HW_MEMSIZE that is 64 bits version of HW_PHYSMEM. We have to use it.
I tested the patch on Mac OS X 10.6.8, 10.7.4, 10.8.5 and FreeBSD 9.2.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
CPU "parser" for AArch64.
Showing cputopology in arm64 linux is work-in-progress so for now
all AArch64 cpus belong to same socket (like PPC).
Also we parse BogoMIPS same like arm 32bit.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Commit 2d74822a9e renamed
"freebsdNodeGetCPUCount" to "appleFreebsdNodeGetCPUCount", leaving one
call to "freebsdNodeGetCPUCount". Fix this other case.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This fixes the following error:
error : nodeGetInfo:933 : this function is not supported
by the connection driver: node info not implemented on this platform
The freebsdNodeGetCPUCount was renamed to appleFreebsdNodeGetCPUCount
in order to make more visible the fact, that it works on Mac OS X too.
Mac OS X can use sysctlbyname as same as FreeBSD to get the CPU
frequency. However, the MIB style name is different from FreeBSD's.
And the unit of the return frequency is also different.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
nodeGetFreeMemory and nodeGetCellsFreeMemory assumed that the NUMA nodes
are contiguous and starting from 0. Unfortunately there are machines
that don't match this assumption:
available: 1 nodes (1)
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 1 size: 16340 MB
node 1 free: 11065 MB
Before this patch:
error: internal error Failed to query NUMA free memory
error: internal error Failed to query NUMA free memory for node: 0
After this patch:
Total: 15772580 KiB
0: 0 KiB
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
If libnuma is not compiled in, or numa_available() returns an
error, stub out fake NUMA info consisting of one NUMA cell
containing all CPUs and memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Not all kernel builds have any entries under the location
/sys/devices/system/cpu/cpu0/topology. We already cope with
that being missing in some cases, but not all. Update the
code which looks for thread_siblings to cope with the missing
file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>12572412</memory>
<cpus num='12'>
...
</cell>
Signed-off-by: Eric Blake <eblake@redhat.com>
When linuxNodeInfoCPUPopulate() method triggered use of an
uninitialize value, since it did not initialize the 'sockets'
field in the virNodeInfoPtr struct:
==30020== Conditional jump or move depends on uninitialised value(s)
==30020== at 0x5125DBD: linuxNodeInfoCPUPopulate (nodeinfo.c:513)
==30020== by 0x51261A0: nodeGetInfo (nodeinfo.c:884)
==30020== by 0x149B9B10: qemuCapsInit (qemu_capabilities.c:846)
==30020== by 0x14A11B25: qemuCreateCapabilities (qemu_driver.c:424)
==30020== by 0x14A12426: qemuStartup (qemu_driver.c:874)
==30020== by 0x512A7AF: virStateInitialize (libvirt.c:822)
==30020== by 0x40DE04: daemonRunStateInit (libvirtd.c:877)
==30020== by 0x50ADCE5: virThreadHelper (virthreadpthread.c:161)
==30020== by 0x328CA07D14: start_thread (pthread_create.c:308)
==30020== by 0x328C6F246C: clone (clone.S:114)
(happened twice)
if (socks > nodeinfo->sockets) <--- here
nodeinfo->sockets = socks;
Rather than doing this for each field, just make the caller memset
the entire struct to zero.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds data gathering to the NUMA gathering files and adds
support for outputting the data. The test driver and xend driver need to
be adapted to fill sensible data to the structure in a future patch.
This will allow storing additional topology data in the NUMA topology
definition.
This patch changes the storage type and fixes fallout of the change
across the drivers using it.
This patch also changes semantics of adding new NUMA cell information.
Until now the data were re-allocated and copied to the topology
definition. This patch changes the addition function to steal the
pointer to a pre-allocated structure to simplify the code.
The use of switch statements inside a bounded for loop resulted in some
false positives regarding the "default:" label which cannot be reached
since each of the other case statements use the possible for loop values.
A [dead_error_begin] was added before the default label.
Commit id ebdbe25a adjusted the algorithm and the caller guarantees that
the 'params' will have a '_' in the name being searched. Add the [returned_null]
tag to the two instances.
Replace use of uname in nodeGetInfo with virArch APIs to
provide canonicalization of host architecture name
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It makes no sense to fail the whole getting command if there is
a parameter unsupported by the kernel. This patch fixes it by
omitting the unsupported parameter for getMemoryParameters.
And for setMemoryParameters, this checks if there is an unsupported
parameter up front of the setting, and just returns failure if not
all parameters are supported.
Prior to this patch, 'virsh nodecpumap' on older kernels reported:
error: Unable to get cpu map
error: out of memory
* src/nodeinfo.c (linuxParseCPUmax): Don't overwrite error.
(nodeGetCPUBitmap): Provide backup implementation.
On RHEL 5, I was getting a segfault trying to start libvirtd,
because we were failing virNodeParseSocket but not checking
for errors, and then calling CPU_SET(-1, &sock_map) as a result.
But if you don't have a topology/physical_package_id file,
then you can just assume that the cpu belongs to socket 0.
* src/nodeinfo.c (virNodeGetCpuValue): Change bool into
default_value.
(virNodeParseSocket): Allow for default value when file is missing,
different from fatal error on reading file.
(virNodeParseNode): Update call sites to fail on error.
Since /sys/devices/system/cpu/present is not available on
older kernels like on RHEL 5.x nodeGetCPUCount will
fail there. The fallback implemented is to scan for
/sys/devices/system/cpu/cpuNN entries.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Lately there were a few reports of the output of the virsh nodeinfo
command being inaccurate. This patch tries to avoid that by checking if
the topology actually makes sense. If it doesn't we then report a
synthetic topology that indicates to the user that the host capabilities
should be checked for the actual topology.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It turns out that calling virNodeGetCPUMap(conn, NULL, NULL, 0)
is both useful, and with Viktor's patches, common enough to
optimize. Since this interface hasn't been released yet, we
can change the RPC call.
A bit more background on the optimization - learning the cpu count
is a single file read (/sys/devices/system/cpu/possible), but
learning the number of online cpus can possibly trigger a file
read per cpu, depending on the age of the kernel, and all wasted
if the caller passed NULL for both arguments.
* src/nodeinfo.c (nodeGetCPUMap): Avoid bitmap when not needed.
* src/remote/remote_protocol.x (remote_node_get_cpu_map_args):
Supply two separate flags for needed arguments.
* src/remote/remote_driver.c (remoteNodeGetCPUMap): Update
caller.
* daemon/remote.c (remoteDispatchNodeGetCPUMap): Likewise.
* src/remote_protocol-structs: Regenerate.
Ever since commit eefb881, ATTRIBUTE_NONNULL has normally been a
no-op under gcc (since it tends to cause more bugs than it cures
given gcc's current lame implementation of the attribute). However,
the macro is still useful to Coverity and other static-analysis
tools, but only if we use it correctly. Coverity follows gcc's lead
in accepting function declarations with attributes at the end, but
function bodies must attach attributes to the return type. That is,
these are valid:
void foo(void *arg) ATTRIBUTE_NONNULL(1);
void ATTRIBUTE_NONNULL(1) foo(void *arg);
void ATTRIBUTE_NONNULL(1) foo(void *arg) {}
but this is not:
void foo(void *arg) ATTRIBUTE_NONNULL(1) {}
even though you don't get a compile failure until you do static
analysis. Bug introduced in commit 80533ca, with these symptoms:
nodeinfo.c:206: error: expected ',' or ';' before '{' token
cc1: warning: unrecognized command line option "-Wno-suggest-attribute=const"
cc1: warning: unrecognized command line option "-Wno-suggest-attribute=pure"
make[3]: *** [libvirt_driver_la-nodeinfo.lo] Error 1
* src/nodeinfo.c (virNodeParseNode): Fix syntax error when
non-null attribute is in use.
It turns out that the cpuacct results properly account for offline
cpus, and always returns results for every possible cpu, not just
the online ones. So there is no need to check the map of online
cpus in the first place, merely only a need to know the maximum
possible cpu. Meanwhile, virNodeGetCPUBitmap had a subtle change
from returning the maximum id to instead returning the width of
the bitmap (one larger than the maximum id) in commit 2f4c5338,
which made this code encounter some off-by-one logic leading to
bad error messages when a cpu was offline:
$ virsh cpu-stats dom
error: Failed to virDomainGetCPUStats()
error: An error occurred, but the cause is unknown
Cleaning this up unraveled a chain of other unused variables.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Drop
pointless check for cpumap changes, and use correct number of
cpus. Simplify signature.
(qemuDomainGetCPUStats): Adjust caller.
* src/nodeinfo.h (nodeGetCPUCount): New prototype.
(nodeGetCPUBitmap): Drop unused parameter.
* src/nodeinfo.c (nodeGetCPUBitmap): Likewise.
(nodeGetCPUMap): Adjust caller.
(nodeGetCPUCount): New function.
* src/libvirt_private.syms (nodeinfo.h): Export it.
Added an implemention of virNodeGetCPUMap to nodeinfo.c,
(nodeGetCPUMap) which can be used by all drivers for a Linux
hypervisor host.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Callers should not need to know what the name of the file to
be read in the Linux-specific version of nodeGetCPUmap;
furthermore, qemu cares about online cpus, not present cpus,
when determining which cpus to skip.
While at it, I fixed the fact that we were computing the maximum
online cpu id by doing a slow iteration, when what we really want
to know is the max available cpu.
* src/nodeinfo.h (nodeGetCPUmap): Rename...
(nodeGetCPUBitmap): ...and simplify signature.
* src/nodeinfo.c (linuxParseCPUmax): New function.
(linuxParseCPUmap): Simplify and alter signature.
(nodeGetCPUBitmap): Change implementation.
* src/libvirt_private.syms (nodeinfo.h): Reflect rename.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Update
caller.
