In a domain created with an interface with a <driver> subelement,
the device contains a non-NULL virDomainVirtioOptions struct, even
for non-virtio NIC models. The subelement need not be present again
after libvirt restarts, or when the interface is passed to clients.
When clients such as virsh domif-setlink put back the modified
interface XML, the new device's virtio attribute is NULL. This may
fail the equality checks for virtio options in qemuDomainChangeNet,
depending on whether libvird was restarted since define or not.
This patch modifies the check for non-virtio models, to ignore olddev
value of virtio (assumed valid), and to allow either NULL or a struct
with all values ABSENT in the new virtio options.
Signed-off-by: Miroslav Los <mirlos@cisco.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to commit 2482801608 we can safely ignore connectionId,
portId and portgroupId in both XML and VMX as they are only a blind
pass-through between XML and VMX and an ethernet without such parameters
was spotted in the wild. On top of that even our documentation says the
whole VMWare Distrubuted Switch configuration is a best-effort.
Resolves: https://issues.redhat.com/browse/RHEL-46099
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This wires up the emulator 'debug' parameter to control the
/usr/bin/swtpm 'level' parameter for logging.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pick up some more of the qemu_driver.c code so this function supports
both CONFIG and LIVE updates.
Note that qemuDomainUpdateDeviceFlags() passed vm->def to
virDomainDeviceDefParse() for the VIR_DOMAIN_AFFECT_CONFIG case, which
is technically incorrect; in the test driver code we'll fix this.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mem_nodes[i].ndistances is written outside the loop causing an out-of-bounds
write leading to heap corruption.
While we are at it, the entire cleanup portion can be removed as it can be
handled in virDomainNumaFree. One instance of VIR_FREE is also removed and
replaced with g_autofree.
This patch also adds a testcase which would be picked up by ASAN, if this
portion regresses.
Fixes: 742494eed8
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Under the test environment, driver->domainEventState is uninitialized. If a
disk gets dropped, it will attempt to queue an event which will cause a
segmentation fault. This crash does not occur during normal use.
This patch moves driver->domainEventState initialization from qemuhotplugtest
to qemuTestDriverInit in testutilsqemu (Credit goes to Michal Privoznik as he
had already provided the diff).
An additional test case is added to test dropping of disks with startupPolicy
set as optional.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changing the postgroup attribute caused unexpected behavior.
Although it can be implemented, it has a non-trivial solution.
No requirement or use has yet been found for implementing this
feature, so it has been disabled for hot-plug.
Resolves: https://issues.redhat.com/browse/RHEL-7299
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current hostdev parsing logic sets rawio or sgio even if the hostdev type
is not 'scsi'. The rawio field in virDomainHostdevSubsysSCSI overlaps with
wwpn field in virDomainHostdevSubsysSCSIVHost, consequently setting a bogus
pointer value such as 0x1 or 0x2 from virDomainHostdevSubsysSCSIVHost's
point of view. This leads to a segmentation fault when it attempts to free
wwpn.
While setting sgio does not appear to crash, it shares the same flawed logic
as setting rawio.
Instead, we ensure these are set only after the hostdev type check succeeds.
This patch also adds two test cases to exercise both scenarios.
Fixes: bdb95b520c
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add basic coverage of device update; for now, only support disk updates
until other types are needed or tested.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'hostFips' member of _virQEMUDriver struct is not used
really, due to previous cleanups. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The support for VXHS device was removed in QEMU commit
v5.1.0-rc1~16^2~10. Since we require QEMU-5.2.0 at least there's
no QEMU that has the device and thus the corresponding capability
can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that the minimal required version of QEMU is 5.2.0 the
conditional setting of QEMU_CAPS_ENABLE_FIPS and
QEMU_CAPS_NETDEV_USER is effectively a dead code. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
According to repology.org and/or distro repos these are the version of QEMU:
CentOS Stream 9: qemu-kvm-9.0.0
Debian 11: qemu-5.2.0
Fedora 39: qemu-8.3.1
openSUSE Leap 15.3: qemu-5.2.0
RHEL-8: qemu-6.2.0
Ubuntu 22.04: qemu-6.2.0
Since the minimal version is 5.2.0 we can bump from 4.2.0 to
5.2.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop capabilities for older versions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop test cases that require older version.
NB, iothreads-disk-virtio-ccw test is removed completely as we
already have plenty of other tests covering the same code paths.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The disk-network-tlsx509-vxhs.xml file will be removed soon. Drop
the test case in qemusecuritytest that relies on it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As I don't have a sparc machine handy add emulated capabilities.
This patch is in preparation for bumping minimum qemu version beyond the
oldest 'sparc' caps we currently have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It may happen that QEMU is compiled without SLIRP but with
support for passt. In such case it is acceptable to alter user
provided configuration and switch backend to passt as it offers
all the features as SLIRP.
Resolves: https://issues.redhat.com/browse/RHEL-45518
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that the logic for detecting supported net backend types has
been moved to domain capabilities generation, we can just use it
when validating net backend type. Just like we do for device
models and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous commits, domain capabilities XML reports basically
two possible values for backend type: 'default' and 'passt'.
Despite its misleading name, 'default' really means 'use
hypervisor's builtin SLIRP'. Since it's reported in domain
capabilities as a value accepted, make our parser and XML schema
accept it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If mgmt apps on top of libvirt want to make a decision on the
backend type for <interface type='user'/> (e.g. whether past is
supported) we currently offer them no way to learn this fact.
Domain capabilities were invented exactly for this reason. Report
supported net backend types there.
Now, because of backwards compatibility, specifying no backend
type (which translates to VIR_DOMAIN_NET_BACKEND_DEFAULT) means
"use hyperviosr's builtin SLIRP". That behaviour can not be
changed. But it may happen that the hypervisor has no support for
SLIRP. So we have to report it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a capability for each domain net backend we can
start validating user's selection against QEMU capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since -netdev user can be disabled during QEMU compilation, we
can't blindly expect it to just be there. We need a capability
that tracks its presence.
For qemu-4.2.0 we are not able to detect the capability so do the
next best thing - assume the capability is there. This is
consistent with our current behaviour where we blindly assume the
capability, anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The original code was incorrect and never tested because at the time of
implementing it the cgroup file `io.weight` was not available.
Resolves: https://issues.redhat.com/browse/RHEL-45185
Introduced-by: 9c1693eff4
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There are some features/improvements/bug fixes I've either
contributed or reviewed/merged. Document them for upcoming
release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When enabling switchover-ack on qemu from libvirt, the .party value
was set to both source and target; however, qemuMigrationParamsCheck()
only takes that into account to validate that the remote side of the
migration supports the flag if it is marked optional or auto/always on.
In the case of switchover-ack, when enabled on only the dst and not
the src, the migration will fail if the src qemu does not support
switchover-ack, as the dst qemu will issue a switchover-ack msg:
qemu/migration/savevm.c ->
loadvm_process_command ->
migrate_send_rp_switchover_ack(mis) ->
migrate_send_rp_message(mis, MIG_RP_MSG_SWITCHOVER_ACK, 0, NULL)
Since the src qemu doesn't understand messages with header_type ==
MIG_RP_MSG_SWITCHOVER_ACK, qemu will kill the migration with error:
qemu-kvm: RP: Received invalid message 0x0007 length 0x0000
qemu-kvm: Unable to write to socket: Bad file descriptor
Looking at the original commit [1] for optional migration capabilities,
it seems that the spirit of optional handling was to enhance a given
existing capability where possible. Given that switchover-ack
exclusively depends on return-path, adding it as optional to that cap
feels right.
[1] 61e34b0856 ("qemu: Add support for optional migration capabilities")
Fixes: 1cc7737f69 ("qemu: add support for qemu switchover-ack")
Signed-off-by: Jon Kohler <jon@nutanix.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Avihai Horon <avihaih@nvidia.com>
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: YangHang Liu <yanghliu@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
