The virConnectGetDomainCapabilities API accepts either a binary path
to the emulator, or desired guest arch. If guest arch is not given,
then the host arch is assumed.
In the case where the binary is not given, the code tried to find the
emulator binary in the existing list of cached emulator capabilities.
This is not valid since we switched to lazy population of the cache in:
commit 3dd91af01f
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 2 13:04:26 2019 +0000
qemu: stop creating capabilities at driver startup
As a result of this change, if there are no persistent guests defined
using the requested guest architecture, virConnectGetDomainCapabilities
will fail to find an emulator binary.
The solution is to stop relying on the cached capabilities to find the
binary and instead use the same logic we use to pick default a binary
per arch when populating capabilities.
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "ps2" bus is only available on certain machines like x86. On
machines like s390x, we should refuse to add a device to this bus
instead of silently ignoring it.
Looking at the QEMU sources, PS/2 is only available if the QEMU binary
has the "i8042" device, so let's check for that and only allow "ps2"
devices if this QEMU device is available, or if we're on x86 anyway
(so we don't have to fake the QEMU_CAPS_DEVICE_I8042 capability in
all the tests that use <input ... bus='ps2'/> in their xml data).
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1763191
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU driver has two functions: qemuGetDHCPInterfaces() and
qemuARPGetInterfaces() that are being used inside only one single
function. They can be turned into generic functions that other drivers
can use. This commit move both from QEMU driver tree to domain conf
tree.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch from old VIR_ allocation APIs to glib equivalents.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function potentially grabs both a monitor job and an agent job at
the same time. This is problematic because it means that a malicious (or
just buggy) guest agent can cause a denial of service on the host. The
presence of this function makes it easy to do the wrong thing and hold
both jobs at the same time. All existing uses have already been removed
by previous commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to avoid holding an agent job and a normal job at the same
time, we want to avoid accessing the domain's definition while holding
the agent job. To achieve this, qemuAgentGetFSInfo() only returns the
raw information from the agent query to the caller. The caller can then
release the agent job and then proceed to look up the disk alias from
the vm definition. This necessitates moving a few helper functions to
qemu_driver.c and exposing the agent data structure (qemuAgentFSInfo) in
the header.
In addition, because the agent function no longer returns the looked-up
disk alias, we can't test the alias within qemuagenttest. Instead we
simply test that we parse and return the raw agent data correctly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemuAgentDiskInfo structure is filled with information received from
the agent command response, except for the 'alias' field, which is
retrieved from the vm definition. Limit this structure only to data that
was received from the agent message.
This is another intermediate step in moving the responsibility for
searching the vmdef from qemu_agent.c to qemu_driver.c so that we can
avoid holding an agent job and a normal job at the same time.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In an effort to avoid holding both an agent and normal job at the same
time, we shouldn't access the vm definition from within qemu_agent.c
(i.e. while the agent job is being held). In preparation, we need to
store the full filesystem disk information in qemuAgentDiskInfo. In a
following commit, we can pass this information back to the caller and
the caller can search the vm definition to match the filsystem disk to
an alias.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function name doesn't give a good idea of what the function does.
Rename to qemuAgentGetFSInfoFillDisks() to make it more obvious than it
is filling in the disk information in the fsinfo struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU since 4.1.0 supports the "dies" parameter for -smp
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When pause-before-switchover QEMU capability is enabled, we get STOP
event before MIGRATION event with postcopy-active state. To properly
handle post-copy migration and emit correct events commit
v4.10.0-rc1-4-geca9d21e6c added a hack to
qemuProcessHandleMigrationStatus which translates the paused state
reason to VIR_DOMAIN_PAUSED_POSTCOPY and emits
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event when migration state changes
to post-copy.
However, the code was effective on both sides of migration resulting in
a confusing VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event on the destination
host, where entering post-copy mode is already properly advertised by
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event.
https://bugzilla.redhat.com/show_bug.cgi?id=1791458
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When resuming a domain from a save file, we read the domain XML
from the file, add it onto our internal list of domains, start
the qemu process, let it load the incoming migration stream and
resume its vCPUs afterwards. If anything goes wrong, the domain
object is removed from the list of domains and error is returned
to the caller. However, the qemu process might be left behind -
if resuming vCPUs fails (e.g. because qemu is unable to acquire
write lock on a disk) then due to a bug the qemu process is not
killed but the domain object is removed from the list.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1718707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have to keep the default - querying the agent if no flag is
set.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
libvirt currently always reports that USB is available as a bus subsystem
type when running "virsh domcapabilities". However, this is not always
true, for example the qemu-system-s390x binary normally never has support
for USB. Thus we should only report that USB is available if there is
also a USB host controller available where we can attach USB devices.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1759849
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Internal snapshots of a non-running domain do not carry any memory state
and restoring such a snapshot will not replace existing saved memory
state. This allows a scenario, where a user first suspends a domain into
managedsave, restores a non-running snapshot and then resumes the domain
from managedsave. After that, the guest system will run with its
previous memory state atop a different disk state. The most obvious
possible fallout from this is extensive file system corruption. Swap
content and RAID bitmaps might also be off.
This has been discussed[1] and fixed[2] from the end-user perspective for
virt-manager.
This patch marks the restore operation as risky at the libvirt level,
requiring the user to remove the saved memory state first or force the
operation.
[1] https://www.redhat.com/archives/virt-tools-list/2019-November/msg00011.html
[2] https://www.redhat.com/archives/virt-tools-list/2019-December/msg00049.html
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v5.10.0-290-g3a4787a301 refactored qemuDomainGetHostdevPath to
return a single path rather than an array of paths. When the function is
called on a missing device, it will now return NULL in @path rather than
a NULL array with zero items and the callers need to be adapted
properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
src/qemu/qemu_domain_address.c:680:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
switch ((virDomainFSModel) dev->data.fs->model) {
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f363af7e35
The point of this function is to translate virDomainOsDefFirmware
enum to qemuFirmwareOSInterface enum. However, with my commit
v5.10.0-507-g8e1804f9f6 we are passing a variable type of
virDomainLoader enum. Make the function accept both enums and
make the enum members correspond to each other.
This fixes clang build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split the formatting by fsdriver type to allow adding a new type.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Split the switch by fsdriver type to allow adding a new one.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the allocation and disposal of private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the 'gluster' part and decouple the return from
the gluster_debug_level parsing to allow adding more options
to this section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inactive VM doesn't have qemuCaps set thus we'd never properly report
that VM backups are supported only for running VMs.
Move the capability check after the active check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While we discourage people to use the old style of specifying
UEFI for their domains (the old style is putting path to the FW
image under /domain/os/loader/ whilst the new one is using
/domain/os/@firmware), some applications might have not adapted
yet. They still rely on libvirt autofilling NVRAM path and
figuring out NVRAM template when using the old way (notably
virt-install does this). We must preserve backcompat for this
previously supported config approach. However, since we really
want distro maintainers to leave --with-loader-nvram configure
option and rely on JSON descriptors, we need to implement
autofilling of NVRAM template for the old way too.
Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1782778
RHEL: https://bugzilla.redhat.com/show_bug.cgi?id=1776949
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This simplifies condition when matching FW interface by having a
single line condition instead of multiline one. Also, it prepares
the code for future expansion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function needs domain definition really, we don't need to
pass the whole domain object. This saves couple of dereferences
and characters esp. in more checks to come.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We insert the checkpoint metadata into the list of checkpoints prior to
actually creating the on-disk bits. If the 'transaction' or any other
steps done between inserting the checkpoint and creating the on-disk
data fail we'd end up with an unusable checkpoint that would vanish
after libvirtd restart.
Prevent this by rolling back the metadata if we didn't actually take and
record the checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we are certain that the checkpoint creation failed we remove the
metadata from the list. To allow reusing this in the backup code add a
new helper and export it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The underlying resctrl monitoring is actually using 64 bit counters,
not the 32bit one. Correct this by using 64bit data type for reading
hardware value.
To keep the interface consistent, the result of CPU last level cache
that occupied by vcpu processors of specific restrl monitor group is
still reported with a truncated 32bit data type. because, in silicon
world, CPU cache size will never exceed 4GB.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Commit d75f865fb9 caused a job-deadlock if
a VM is running the backup job and being destroyed as it removed the
cleanup of the async job type and there was nothing to clean up the
backup job.
Add an explicit cleanup of the backup job when destroying a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When cancelling the blockjobs as part of failed backup job startup
recover we didn't pass in the correct async job type. Luckily the block
job handler and cancellation code paths use no block job at all
currently so those were correct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we delete the images elsewhere it's not required. Additionally
it's safe to do as we never released an upstream version which required
this being in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While qemu is running both locations are identical in semantics, but the
move will allow us to fix the scenario when the VM is destroyed or
crashes where we'd leak the images.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In contrast to snapshots the backup job does not complain when the
backup job's store file has backing pre-configured. It's actually
required so that the NBD server exposes all the data properly.
Remove our fake termination and use the existing disk source as backing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainObjPrivateDataClear clears state which become invalid after VM
stopped running and the node name allocator belongs there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The waiting loop used QEMU_ASYNC_JOB_NONE rather than 'asyncJob' passed
from the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A few places were importing dirname.h without actually using it.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GLib g_lstat() function provides a portable impl for
Win32.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we use fake reboot then domain goes thru running->shutdown->running
state changes with shutdown state only for short period of time. At
least this is implementation details leaking into API. And also there is
one real case when this is not convinient. I'm doing a backup with the
help of temporary block snapshot (with the help of qemu's API which is
used in the newly created libvirt's backup API). If guest is shutdowned
I want to continue to backup so I don't kill the process and domain is
in shutdown state. Later when backup is finished I want to destroy qemu
process. So I check if it is in shutdowned state and destroy it if it
is. Now if instead of shutdown domain got fake reboot then I can destroy
process in the middle of fake reboot process.
After shutdown event we also get stop event and now as domain state is
running it will be transitioned to paused state and back to running
later. Though this is not critical for the described case I guess it is
better not to leak these details to user too. So let's leave domain in
running state on stop event if fake reboot is in process.
Reconnection code handles this patch without modification. It detects
that qemu is not running due to shutdown and then calls qemuProcessShutdownOrReboot
which reboots as fake reboot flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We don't need this for any functional purpose, but when debugging hosts
it is useful to know what binary a given capabilities XML document is
associated with.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify repeated code patterns by providing a new constructor taking
the QEMU binary name.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently if the binary path is NULL in the qemu capabilities object,
cache invalidation is skipped. A future patch will ensure that the
binary path is always non-NULL, so a way to explicitly skip invalidation
is required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'cleanup' flag is doing no cleaup in this function. We can
remove it and return NULL on error or qemuBuildCommandLine().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The g_auto*() changes made by the previous patches made a lot
of 'cleanup' labels obsolete. Let's remove them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change all feasible pointers to use g_autoptr().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will allow us to g_autoptr qemuDomainLogContext pointers
in the following patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change all feasible strings and scalar pointers to use g_autofree.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserDirectory() *never* *ever* returns NULL, making the checks for
it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.
qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move EGL Headless validation from qemuBuildGraphicsEGLHeadlessCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.
It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The current 'for' loop with 5 consecutive 'ifs' inside
qemuBuildHostdevCommandLine can be a bit smarter:
- all 5 'ifs' fails if hostdev->mode is not equal to
VIR_DOMAIN_HOSTDEV_MODE_SUBSYS. This check can be moved to the
start of the loop, failing to the next element immediately
in case it fails;
- all 5 'ifs' checks for a specific subsys->type to build the proper
command line argument (virHostdevIsSCSIDevice and virHostdevIsMdevDevice
do that but within a helper). Problem is that the code will keep
checking for matches even if one was already found, and there is
no way a hostdev will fit more than one 'if' (i.e. a hostdev can't
have 2+ different types). This means that a SUBSYS_TYPE_USB will
create its command line argument in the first 'if', then all other
conditionals will surely fail but will end up being checked anyway.
All of this can be avoided by moving the hostdev->mode comparing
to the start of the loop and using a switch statement with
subsys->type to execute the proper code for a given hostdev
type.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When freeing qemu driver struct members, we forgot to free
@hostcpu and @hostnuma members.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is supposed to clean up virQEMUDriver structure and
free individual members. However, it's doing that in random order
which makes it hard to track which members are being freed and
which are not. Do the free in reverse order than the structure
definition - assuming that the most important members (like
mutex) are declared first and freed last.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Prior to commit 55ce656463 (first in libvirt 4.6.0), the XML sent to
virDomainAttachDeviceFlags() was parsed only once, and the results of
that parse were inserted into both the live object of the running
domain and into the persistent config. Thus, if MAC address was
omitted from in XML for a network device (<interface>), both the live
and config object would have the same MAC address.
Commit 55ce656463 changed the code to parse the incoming XML twice -
once for live and once for config. This does eliminate the problem of
PCI (/scsi/sata) address conflicts caused by allocating an address
based on existing devices in live object, but then inserting the
result into the config (which may already have a device using that
address), BUT it also means that when the MAC address of a network
device hasn't been specified in the XML, each copy will get a
different auto-generated MAC address.
This results in the MAC address of the device changing the next time
the domain is shutdown and restarted, which creates havoc with the
guest OS's network config.
There have been several discussions about this in the last > 1 year,
attempting to find the ideal solution to this problem that makes MAC
addresses consistent and accounts for all sorts of corner cases with
PCI/scsi/sata addresses. All of these discussions fizzled out because
every proposal was either too difficult to implement or failed to fix
some esoteric case someone thought up.
So, in the interest of solving the MAC address problem while not
making the "other address" situation any worse than before, this patch
simply adds a qemuDomainAttachDeviceLiveAndConfigHomogenize() function
that (for now) copies the MAC address from the config object to the
live object (if the original xml had <mac address='blah'/> then this
will be an effective NOP (as the macs already match)).
Any downstream libvirt containing upstream commit
55ce656463 should have this patch as well.
https://bugzilla.redhat.com/1783411
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we use glib alloc functions, we can drop the 'cleanup' label
and @rv variable and also simplify the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some variables are not used outside of the for() loop. Move their
declaration to clean up the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
When using the monolithic daemon, then dom->conn has all driver
tables filled in properly and thus it's safe to call an API other
than virDomain*(). However, when using split daemons then
dom->conn has only hypervisor driver table set
(dom->conn->driver) and the rest is NULL. Therefore, if we want
to call a non-domain API (virNetworkLookupByName() in this case),
we have obtain the cached connection object accessible via
virGetConnectNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we place qemuDomainInterfaceAddresses() a few lines below the
two functions its using then we can drop forward declarations of
those functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While at bugfixing, convert the whole function to the new-style memory
allocation handling.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
At the very beginning of the attach function the
qemuDomainStorageSourceChainAccessAllow() is called which
modifies CGroups, locks and seclabels for new disk and its
backing chain. This must be followed by a counterpart which
reverts back all the changes if something goes wrong. This boils
down to calling qemuDomainStorageSourceChainAccessRevoke() which
is done under 'error' label. But not all failure branches jump
there. They just jump onto 'cleanup' label where no revoke is
done. Such mistake is easy to do because 'cleanup' label does
exist. Therefore, dissolve 'error' block in 'cleanup' and have
everything jump onto 'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Because this is a HMP we're dealing with, there is nothing like
class of reply message, so we have to do some string comparison
to guess if the command fails. Well, with NVMe disks whole new
class of errors comes to play because qemu needs to initialize
IOMMU and VFIO for them. You can see all the messages it may
produce in qemu_vfio_init_pci().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to allow it
on devices CGroup so that qemu can access it. There is one caveat
though - if an NVMe disk is read only we need CGroup to allow
write too. This is because when opening the device, qemu does
couple of ioctl()-s which are considered as write.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are couple of places where a domain with a VFIO device gets
special treatment: in CGroups when enabling/disabling access to
/dev/vfio/vfio, and when creating/removing nodes in domain mount
namespace. Well, a NVMe disk is a VFIO device too. Fortunately,
we have this qemuDomainNeedsVFIO() function which is the only
place that needs adjustment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to create
/dev/vfio/* paths in domain's namespace so that qemu can open
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We have this beautiful function that does crystal ball
divination. The function is named
qemuDomainGetMemLockLimitBytes() and it calculates the upper
limit of how much locked memory is given guest going to need. The
function bases its guess on devices defined for a domain. For
instance, if there is a VFIO hostdev defined then it adds 1GiB to
the guessed maximum. Since NVMe disks are pretty much VFIO
hostdevs (but not quite), we have to do the same sorcery.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The qemu driver has its own wrappers around virHostdev module (so
that some arguments are filled in automatically). Extend these to
include NVMe devices too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are going to be more disk types that are considered unsafe
with respect to migration. Therefore, move the error reporting
call outside of if() body and rework if-else combo to switch().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Sometimes, we have a PCI address and not fully allocated
virPCIDevice and yet we still want to know its /dev/vfio/N path.
Introduce virPCIDeviceAddressGetIOMMUGroupDev() function exactly
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Previous patches rendered some of 'cleanup' labels needless.
Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that all callers of qemuDomainGetHostdevPath() handle
/dev/vfio/vfio on their own, we can safely drop handling in this
function. In near future the decision whether domain needs VFIO
file is going to include more device types than just
virDomainHostdev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are several variables which could be automatically freed
upon return from the function. I'm not changing @tmpPaths (which
is a string list) because it is going to be removed in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future, the decision what to do with /dev/vfio/vfio with
respect to domain namespace and CGroup is going to be moved out
of qemuDomainGetHostdevPath() because there will be some other
types of devices than hostdevs that need access to VFIO.
All functions that I'm changing (except qemuSetupHostdevCgroup())
assume that hostdev we are adding/removing to VM is not in the
definition yet (because of how qemuDomainNeedsVFIO() is written).
Fortunately, this assumption is true.
For qemuSetupHostdevCgroup(), the worst thing that may happen is
that we allow /dev/vfio/vfio which was already allowed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildSoundCodecStr() validates if a given QEMU binary
supports the sound codec. This validation can be moved to
qemu_domain.c to be executed in domain define time.
The codec validation was moved to the existing
qemuDomainDeviceDefValidateSound() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_OBJECT_USB_AUDIO and
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA to a new function in qemu_domain.c,
qemuDomainDeviceDefValidateSound(). This function is called by
qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuBuildTPMDevStr() does TPM model validation that can be moved to
qemu_domain.c, allowing validation in domain define time. This patch
moves it to the existing qemuDomainDeviceDefValidateTPM() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Console validation is currently being done by qemuBuildConsoleCommandLine().
This patch moves it to a new qemuDomainDefValidateConsole() function. This
new function is then called by qemuDomainDefValidate(), validating the
console in domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are validations for SDL, VNC, SPICE and EGL_HEADLESS
around several BuildGraphics*CommandLine in qemu_command.c. This
patch starts to move all of them to qemu_domain.c, inside the
existent qemuDomainDeviceDefValidateGraphics() function. This
function is called by qemuDomainDefValidate(), validating the
graphics parameters in domain define time.
In this patch we'll move the SDL validation code from
qemuBuildGraphicsSDLCommandLine(). Tests were adapted to consider
SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
@def->clock validation is done by qemuBuildClockCommandLine() and
qemuBuildClockArgStr(). This patch centralize the validation done
in both these functions to a new qemuDomainDefValidateClockTimers()
function. This new function is then called by qemuDomainDefValidate(),
promoting clock validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU_CAPS_DEVICE_VMGENID is now being validated by
qemuDomainDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_CHARDEV_FILE_APPEND and
QEMU_CAPS_CHARDEV_LOGFILE to qemuDomainChrSourceDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_USB_HUB to a new function in
qemu_domain.c, qemuDomainDeviceDefValidateHub(). This function is
called by qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new function qemuDomainDeviceDefValidateNVRAM() was created
to validate the NVRAM in domain define time. Unit test was
adjusted to account for the extra QEMU_CAPS_DEVICE_NVRAM required
during domain define.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will validate QEMU_CAPS_NUMA_DIST in a new qemu_domain.c
function. The code to verify if a NUMA node distance is being
set will still be needed in qemuBuildNumaArgStr() though.
To avoid code repetition, let's put this logic in a helper to be
used in qemuBuildNumaArgStr() and in the new function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Validation of MACHINE_KERNEL_IRQCHIP and MACHINE_KERNEL_IRQCHIP_SPLIT
QEMU caps are now being done in qemuDomainDefValidateFeatures().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To allow backups work across external snapshots we need to improve the
algorithm which calculates which bitmaps to merge.
The algorithm must look for appropriately named bitmaps in the image and
possibly descend into a backing image if the current image does not have
the bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This function looks up a named bitmap for a virStorageSource in the data
returned from query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function will require the bitmap topology for the full
implementation. To facilitate testing, add the propagation of the
necessary data beforehand so that the test code can stay unchanged
during the changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate the for now incomplete code that collects the bitmaps to be
merged for an incremental backup into a separate function. This will
allow adding testing prior to the improvement of the algorithm to
include snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The object itself has no extra value and it would make testing the code
harder. Refactor it to remove just the definition pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Re-create any active persistent bitmap in the snapshot overlay image so
that tracking for a checkpoint is persisted. While this basically
duplicates data in the allocation map it's currently the only possible
way as qemu can't mirror the allocation map into a dirty bitmap if we'd
ever want to do a backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainSnapshotDiskPrepareOne is already called for each disk which
is member of the snapshot so we don't need to iterate through the
snapshot list again to generate members of the 'transaction' command for
each snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For testing purposes it will be beneficial to be able to parse the data
from JSON directly rather than trying to simulate the monitor. Extract
the worker bits and export them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We will need to inspect the presence and attributes for dirty bitmaps.
Extract them when processing reply of query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The use of the parseOpaque parameter was mistakenly removed in
commit 4a4132b462
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Dec 3 10:49:49 2019 +0000
conf: don't use passed in caps in post parse method
causing the method to re-fetch qemuCaps that were already just
fetched and put into parseOpaque.
This is inefficient when parsing incoming XML, but for live
XML this is more serious as it means we use the capabilities
for the current QEMU binary on disk, rather than the running
QEMU.
That commit, however, did have a useful side effect of fixing
a crasher bug in the qemu post parse callback introduced by
commit 5e939cea89
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Sep 26 18:42:02 2019 +0200
qemu: Store default CPU in domain XML
The qemuDomainDefSetDefaultCPU() method in that patch did not
allow for the possibility that qemuCaps would be NULL and thus
resulted in a SEGV.
This shows a risk in letting each check in the post parse
callback look for qemuCaps == NULL. The safer option is to
check once upfront and immediately stop (postpone) further
validation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function will be removed in a future commit because it allows the
caller to acquire both monitor and agent jobs at the same time. Holding
both job types creates a vulnerability to denial of service from a
malicious guest agent.
qemuDomainSetVcpusFlags() always passes NONE for either the monitor job
or the agent job (and thus is not vulnerable to the DoS), so we can
simply replace this function with the functions for acquiring the
appropriate type of job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that the portion issuing the agent command only
holds an agent job and the portion issuing the monitor command holds
only a monitor job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding a
monitor job while we're querying the agent, we open ourselves up to a
DoS.
So split the function up a bit to only hold the monitor job while
querying qemu for whether the domain supports suspend. Then acquire only
an agent job while issuing the agent suspend command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that we only hold the appropriate type of job
while rebooting.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS. So split the function into separate parts: one that does the agent
shutdown and one that does the monitor shutdown. Each part holds only a
job of the appropriate type.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the uses passing a single parameter as the length.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
