Copy the socket path in qemuExtDevicesStart, because
for libvirt-managed virtiofsd daemons the path is filled there
in qemuVirtioFSStart.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far VIR_DOMAIN_FS_ACCESSMODE_PASSTHROUGH is always set
in virDomainFSDefPostParse, but future commits aim to change
that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the default setting of accessmode to the post-parse phase.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The end quote of the argument of :since: must not have a space in front
of it as it's then not considered as end of the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `speed`, which does not make sense for
a value measured in Mbits per second.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In certain rare occasions qemu can transition a block job which was
already 'ready' into 'standby' and then back. If this happens in the
following order libvirt will get confused about the actual job state:
1) the block copy job is 'ready' (job->state == QEMU_BLOCKJOB_STATE_READY)
2) user calls qemuDomainBlockJobAbort with VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT
flag but without VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC
3) the block job is switched to synchronous event handling
4) the block job blips to 'standby' and back to 'ready', the event is
not processed since the blockjob is in sync mode for now
5) qemuDomainBlockJobPivot is called:
5.1) 'job-complete' QMP command is issued
5.2) job->state is set to QEMU_BLOCKJOB_STATE_PIVOTING
6) code for synchronous-wait for the job completion in qemuDomainBlockJobAbort
is invoked
7) the waiting loop calls qemuBlockJobUpdate:
7.1) job->newstate is QEMU_BLOCKJOB_STATE_READY due to 4)
7.2) qemuBlockJobEventProcess is called
7.3) the handler for QEMU_BLOCKJOB_STATE_READY overwrites
job->state from QEMU_BLOCKJOB_STATE_PIVOTING to QEMU_BLOCKJOB_STATE_READY
8) qemuDomainBlockJobAbort is looking for a finished job, so waits again
9) qemu finishes the blockjob and transitions it into 'concluded' state
10) qemuBlockJobUpdate is triggered again, this time finalizing the job.
10.1) job->newstate is = QEMU_BLOCKJOB_STATE_CONCLUDED
job->state is = QEMU_BLOCKJOB_STATE_READY
10.2) qemuBlockJobEventProcessConcluded is called, the function
checks whether there was an error with the blockjob. Since
there was no error job->newstate becomes
QEMU_BLOCKJOB_STATE_COMPLETED.
10.3) qemuBlockJobEventProcessConcludedTransition selects the action
for the appropriate block job type where we have:
case QEMU_BLOCKJOB_TYPE_COPY:
if (job->state == QEMU_BLOCKJOB_STATE_PIVOTING && success)
qemuBlockJobProcessEventConcludedCopyPivot(driver, vm, job, asyncJob);
else
qemuBlockJobProcessEventConcludedCopyAbort(driver, vm, job, asyncJob);
break;
Since job->state is QEMU_BLOCKJOB_STATE_READY,
qemuBlockJobProcessEventConcludedCopyAbort is called.
This patch forbids transitions to QEMU_BLOCKJOB_STATE_READY if the
previous job state isn't QEMU_BLOCKJOB_STATE_RUNNING or
QEMU_BLOCKJOB_STATE_NEW.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1951507
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Future patch will remove MKFS define as we will no longer check it
during compilation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the tests would fail if the bhyve commands are installed in
different path then /usr/bin. Strip the command path to not depend on
the host environment.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upstream sheepdog changed collie to dog back in 2013 in version 0.7.0.
Looking into repology that version is no longer used by any distribution
supported by libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function in question uses "tc" binary so virnetdevbandwidth feels
like better place for it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of checking for specific error that the binaries are not
available mock the virFindFileInPath function. This way we don't have
to skip these tests on host where the binaries are missing.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow us to run tests using firewall on hosts where the mocked
binaries are not available/installed instead of skipping these tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Following patches will make this change necessary as we will stop
detecting the full path during compile time.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of removing binaryPath let's drop the function completely as
it is not used anywhere.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of removing binaryPath let's drop the function completely as
it is not used anywhere.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We will never call dnsmasqCapsRefresh() so reflect what actually
happens.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new enum helpers use a set of flags to modify their behaviour, but
the declared set of flags is semantically confusing:
typedef enum {
VIR_XML_PROP_OPTIONAL = 0, /* Attribute may be absent */
VIR_XML_PROP_REQUIRED = 1 << 0, /* Attribute may not be absent */
Since VIR_XML_PROP_OPTIONAL is declared as 0 any other flag shadows it
and makes it impossible to detect. The functions are not able to detect
a semantic nonsense of VIR_XML_PROP_OPTIONAL | VIR_XML_PROP_REQUIRED and
it's a perfectly valid statement for the compilers.
In general having two flags to do the same boolean don't make sense and
the implementation doesn't fix any shortcomings either.
To prevent mistakes, rename VIR_XML_PROP_OPTIONAL to VIR_XML_PROP_NONE,
so that there's always an enum value used with the calls but it doesn't
imply that the flag makes the property optional when the actual value is
0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As I've pointed out in my review, the negative number wrapping for
unsigned variables is an anti-feature which should not be promoted in
any way.
Remove VIR_XML_PROP_WRAPNEGATIVE which would make it more accessible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
testUpdateQEMUCaps is called multiple times. Use virQEMUCapsUpdateHostCPUModel
instead of virQEMUCapsInitHostCPUModel to not overwrite (and leak) the
pointers in qemuCaps->kvm.hostCPU and qemuCaps->tcg.hostCPU.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
xmlDocSetRootElement removes the node from its previous document tree,
effectively removing the "<cpu>" node from "<domain>" in virCPUDefParseXML.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the last cleanup task was removed in the previous commit, just
remove the label and return early on error rather than goto cleanup.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
