Commit Graph

954 Commits

Author SHA1 Message Date
Eric Blake
b794d2a572 build: fix 'make check' linkage with dtrace
Building on Linux with dtrace enabled was failing 'make check':

  CCLD   nodeinfotest
../src/.libs/libvirt_test.a(libvirt_net_rpc_client_la-virnetclient.o): In function `virNetClientNew':
/home/remote/eblake/libvirt/src/rpc/virnetclient.c:162: undefined reference to `libvirt_rpc_client_new_semaphore'

On looking further, I see some earlier warnings emitted from libtool:

*** Warning: Linking the shared library libvirt.la against the non-libtool
*** objects  probes.o is not portable!

Since src/probes.o is only built on Linux, and even then, only when
dtrace is enabled, this failure does not affect other platforms, and
despite libtool warning that it is not generally portable, it is not
a problem for our use-case in libvirt.la.  But it turns out that while
libtool is willing to jam raw .o files into an installed shared
library (libvirt.la becomes libvirt.so), it is NOT willing to jam
the same .o file into the convenience library libvirt_test.la.
Perhaps this is a bug in libtool, but even if we get libtool fixed,
libvirt must continue to build on platforms with older libtool.  So,
the fix is the same as we are already using for the libvirt_lxc
executable - don't rely on the .o file being in the convenience
library, but instead use LDADD to pull it in directly.

* tests/Makefile.am (PROBES_O): New macro.
(LDADDS): Use it to fix link errors.
2011-10-11 14:08:54 -06:00
Jiri Denemark
15d52307f9 build: Fix VPATH build with new probes 2011-10-11 21:41:51 +02:00
Guido Günther
dca1a6b46f xen_xs: Guard against set but empty kernel argument
On xen 4.1 I observed configurations that look like:

(image
    (hvm
        (kernel '')
        (loader '/foo/bar')
))

The kernel element is there but unset. This leads to an empty <kernel/>
element in the XML and even worse makes us skip the boot order parsing
and therefore not emit a <boot device='$dev>'/> element which breaks CD
booting.
2011-10-10 22:58:04 +02:00
Laine Stump
4bb4109f7b qemu: add separate rerror_policy for disk errors
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.

This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).

For consistency, the value "report" has been added to the possible
values for error_policy as well.
2011-10-06 14:49:23 -04:00
Laine Stump
91195b4321 qemu: leave rerror policy at default when enospace is requested
commit 12062ab set rerror=ignore when error_policy="enospace" was
selected (since the rerror option in qemu doesn't accept "enospc", as
the werror option does).

After that patch was already pushed, Paolo Bonzini noticed it and
commented that leaving rerror at the default ("report") would be a
better choice. This patch corrects the problem - if error_policy =
"enospace" is given, rerror is left off the qemu commandline,
effectively setting it to "report". For other values, rerror is still
set to match werror.

Additionally, the parsing of error_policy was changed to no longer
erroneously allow "default" as a choice - as with most other
attributes, if you want the default setting, just don't specify an
error_policy.

Finally, two ommissions in the first patch were corrected - a
long-dormant qemuxml2argv test for enospace was enabled, and fixed to
pass, and the argv2xml parser in qemu_command.c was updated to
recognize the different spelling on the qemu commandline.
2011-10-06 14:49:13 -04:00
Eric Blake
8644a379d7 qemu: enable multifunction for older qemu
Now that RHEL 6.2 Beta is out, it would be nice to test multifunction
devices on that platform.  This changes things so that the multifunction
cap bit can be set in two different ways: by version comparison (needed
for qemu 0.13 which lacked a -device query), and by -device query
(provided by qemu.git and backported to the RHEL beta build of
qemu-kvm which still claims to be a modified 0.12, and therefore needed
for RHEL).

* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Allow
second method of setting multifunction cap bit.
* tests/qemuhelptest.c (mymain): Test it.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device: Likewise.
2011-10-06 10:41:21 -06:00
Laine Stump
c329db7180 qemu: make PCI multifunction support more manual
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see

  https://bugzilla.redhat.com/show_bug.cgi?id=728174

and the discussion before and after

  https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html

This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:

  <address type='pci' domain='0x0000' bus='0x00'
           slot='0x04' function='0x0' multifunction='on'/>

In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.

With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.

A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
2011-10-01 11:48:28 -04:00
Jiri Denemark
2a449549c1 logging: Do not log timestamp through syslog
Syslog puts the timestamp to every message anyway so this removes
redundant data.
2011-09-29 13:42:34 +02:00
Jamie Strandboge
03d89991f2 fix AppArmor driver for pipe character devices
The AppArmor security driver adds only the path specified in the domain
XML for character devices of type 'pipe'. It should be using <path>.in
and <path>.out. We do this by creating a new vah_add_file_chardev() and
use it for char devices instead of vah_add_file(). Also adjust
valid_path() to accept S_FIFO (since qemu chardevs of type 'pipe' use
fifos). This is https://launchpad.net/bugs/832507
2011-09-28 15:43:39 +08:00
Laine Stump
dc79852af8 qemu: add ability to set PCI device "rombar" on or off
This patch was made in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=738095

In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).

rombar is forced on/off by adding:

  <rom bar='on|off'/>

inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.

At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
2011-09-27 11:23:28 -04:00
Oskari Saarenmaa
f887334dcf Add unsafe cache mode support for disk driver
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
    as even if $prefix_CACHE_V2 is set, we can't know if unsafe
    is supported.

  * Improved the reliability of qemu cache type detection.
2011-09-23 08:29:57 -06:00
Eric Blake
466f902446 virsh: fix regression in argv parsing
Prior to commit 85d2810, we had an issue where:

snapshot-create-as dom name --diskspec spec --diskspec spec

failed to parse the second spec, because the first spec had marked
that option as no longer requiring an argument.

In commit 85d2810, I fixed it by making argv options no longer mark
the option as seen.  But this in turn breaks mandatory argv options,
which now complain that the argv option is missing.

This patch reverts that part of 85d2810, and instead replaces it with
fixes to no longer clear opts_need_arg of an argv argument.

* tools/virsh.c (vshCmddefGetOption, vshCmddefGetData)
(vshCommandParse): Fix option parsing for required argv option.
(vshCmddefOptParse): Check that argv option is last.
* tests/virsh-optparse: Enhance test.
2011-09-22 13:28:18 +08:00
Oskari Saarenmaa
42b23434b0 tests: improve test failure diagnosis
* qemuhelptest prints test case name on failure.
2011-09-21 15:17:14 -06:00
Jiri Denemark
f84aedad09 qemu: Fix shutdown regression with buggy qemu
The commit that prevents disk corruption on domain shutdown
(96fc478417) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.

This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".
2011-09-21 16:53:06 +02:00
Daniel P. Berrange
8e44e5593e Prevent crash from dlclose() of libvirt.so
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.

To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt

* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
  with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
  tests/shunloadtest.c: A test case to unload libvirt while
  a thread is still running.
2011-09-16 15:51:31 -06:00
Eric Blake
85d2810823 snapshot: tweak snapshot-create-as diskspec docs
With this patch, it is hopefully a bit more obvious that for
snapshot-create-as, a literal '--diskspec' is mandatory if name
or description was omitted, but optional if all earlier options
were provided.

These all denote two diskspecs and a description:
virsh snapshot-create-as dom name desc vda vdb
virsh snapshot-create-as dom name desc --diskspec vda --diskspec vdb
virsh snapshot-create-as dom name desc --diskspec vda vdb
virsh snapshot-create-as dom name desc vda --diskspec vdb
virsh snapshot-create-as dom --diskspec vda --diskspec vdb name desc

This gives two diskspecs but no description:
virsh snapshot-create-as dom name --diskspec vda --diskspec vdb

And this treats 'vda' as the description, with only one diskspec:
virsh snapshot-create-as dom name vda vdb

The help output now shows:
    snapshot-create-as <domain> [<name>] [<description>] [--print-xml] [--no-metadata] [--halt] [--disk-only] [[--diskspec] <string>]...

I also checked the help output for echo and send-key, which are two
other variants of argv commands.

* tools/virsh.pod (snapshot-create-as): Document when a literal
--diskspec must preceed a diskspec argument.
* tools/virsh.c (vshCmddefHelp): Update help output for argv when
naming the option is useful.
(vshCmddefGetData): Fix logic on when argv was seen.
* tests/virsh-optparse: Add tests to avoid regressions.
2011-09-15 16:18:12 -06:00
Alex Jia
3a89819de8 tests: avoid memory leak on testTLSSessionInit
* tests/virnettlscontexttest: fix memory leak on virnettlscontext test case.

* Detected in valgrind run:

==25667==
==25667== 86,651 (34,680 direct, 51,971 indirect) bytes in 10 blocks are
definitely lost in loss record 350 of 351
==25667==    at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667==    by 0x4F1F515D: gnutls_init (gnutls_state.c:270)
==25667==    by 0x8053432: virNetTLSSessionNew (virnettlscontext.c:1181)
==25667==    by 0x804DD24: testTLSSessionInit (virnettlscontexttest.c:624)
==25667==    by 0x804F14D: virtTestRun (testutils.c:140)
==25667==
==25667== 100,578 (38,148 direct, 62,430 indirect) bytes in 11 blocks are
definitely lost in loss record 351 of 351
==25667==    at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667==    by 0x4F1F515D: gnutls_init (gnutls_state.c:270)
==25667==    by 0x8053432: virNetTLSSessionNew (virnettlscontext.c:1181)
==25667==    by 0x804DD3C: testTLSSessionInit (virnettlscontexttest.c:625)
==25667==    by 0x804F14D: virtTestRun (testutils.c:140)

* How to reproduce?
% cd libvirt && ./configure && make && make -C tests valgrind
or
% valgrind -v --leak-check=full ./tests/virnettlscontexttest

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-09-08 11:03:34 +01:00
Marc-André Lureau
2e0dbaad9b redirdev: allows to specify device address
It is important to be able to attach USB redirected devices to a
particular controller (one that supports USB2 for instance).
Without this patch, only the default bus was used.

     <redirdev bus='usb' type='spicevmc'>
       <address type='usb' bus='0' port='4'/>
     </redirdev>
2011-09-06 15:12:52 +08:00
Eric Blake
35d52b56bb snapshot: wire up disk-only flag to snapshot-create
Expose the disk-only flag through virsh.  Additionally, make
virsh snapshot-create-as take an arbitrary number of diskspecs,
which can be used to build up the xml for <domainsnapshot>.

* tools/virsh.c (cmdSnapshotCreate): Add --disk-only.
(cmdSnapshotCreateAs): Likewise, and add argv diskspec.
(vshParseSnapshotDiskspec): New helper function.
(vshCmddefGetOption): Allow naming of argv field.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
them.
* tests/virsh-optparse: Test snapshot-create-as parsing.
2011-09-05 07:03:04 -06:00
Eric Blake
89b6284fd9 snapshot: also support disks by path
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots.  So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.

* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
2011-09-05 07:03:04 -06:00
Eric Blake
d6f6b2d194 snapshot: add <disks> to snapshot xml
Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.

For now, no driver accepts this element; that will come later.

<domainsnapshot>
  ...
  <disks>
    <disk name='vda' snapshot='no'/>
    <disk name='vdb' snapshot='internal'/>
    <disk name='vdc' snapshot='external'>
      <driver type='qcow2'/>
      <source file='/path/to/new'/>
    </disk>
  </disks>
  <domain>
    ...
    <devices>
      <disk ...>
        <driver name='qemu' type='raw'/>
        <target dev='vdc'/>
        <source file='/path/to/old'/>
      </disk>
    </devices>
  </domain>
</domainsnapshot>

* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.
2011-09-05 07:03:04 -06:00
Eric Blake
5b30b08d66 snapshot: support extra state in snapshots
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
2011-09-05 07:03:04 -06:00
Eric Blake
471235307f snapshot: additions to domain xml for disks
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.html
https://www.redhat.com/archives/libvir-list/2011-August/msg00552.html

Adds snapshot attribute and transient sub-element:

<devices>
  <disk type=... snapshot='no|internal|external'>
    ...
    <transient/>
  </disk>
</devices>

* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
2011-09-05 07:03:04 -06:00
Marc-André Lureau
ddc9036281 Add a usb1 & usb2 qemuxml2argv test 2011-09-05 15:07:01 +08:00
Marc-André Lureau
360aaafc63 Default USB device is on slot 1 function 2
Fix qemuAssignDevicePCISlots() and the associated regression tests
2011-09-05 15:03:27 +08:00
Eric Blake
2a95a3e976 snapshot: update rng to support full domain in xml
This patch will probably cause merge conflicts to those trying
to do backports.  The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.

* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file.  Sort lines.
* mingw32-libvirt.spec.in: Likewise.
2011-09-03 08:12:13 -06:00
Marc-André Lureau
4813b3f094 Learn to use spicevmc as a redirection type for usb-redir 2011-09-02 23:39:03 +08:00
Marc-André Lureau
162efa1a7c Add "redirdev" redirection device
- create a new "redirdev" element for this purpose
2011-09-02 23:39:03 +08:00
Marc-André Lureau
fdd14a9d05 qemu: Don't append 0 at usb id, so that it is compatible with legacy -usb
QEMU uses USB bus name "usb.0" when using the legacy -usb argument.
If we want to allow USB devices to specify their addresses with legacy
-usb, we should either in case of legacy bus name drop the 0 from the
address bus, or just drop the 0 from device id. This patch does the
later.

Another solution would be to permit addressing on non-legacy USB
controllers only.
2011-09-02 23:39:03 +08:00
Marc-André Lureau
31710a5389 Modify USB port to be defined as a port path
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.

      <hub type='usb'>
         <address type='usb' bus='0' port='1'/>
      </hub>

      <input type='mouse' type='usb'>
         <address type='usb' bus='0' port='1.1'/>
      </hub>

also add a test entry
2011-09-02 23:39:03 +08:00
Marc-André Lureau
fdabeb3c5f Add USB hub device
domain parsing and serialization code, qemu driver backend and
a couple of test
2011-09-02 23:38:52 +08:00
Marc-André Lureau
f3ce59621f Add USB companion controllers support
Companion controllers take an extra 'master' attribute to associate
them.

Also add tests for this
2011-09-02 23:22:56 +08:00
Marc-André Lureau
22c0d433ab USB devices gain a new USB address child element
Expand the domain and the QEmu driver code
Adds a couple of tests
2011-09-02 23:22:56 +08:00
Marc-André Lureau
33d11150b7 test: USB controller can have a PCI address child element
add a few tests for the new constructs
2011-09-02 23:22:56 +08:00
Marc-André Lureau
d6d54cd19e Add a new controller type 'usb' with optionnal 'model'
The model by default is piix3-uchi.

Example:
<controller type='usb' index='0' model='ich9-ehci'/>
2011-09-02 23:22:56 +08:00
Marc-André Lureau
8631bdc0c8 Rename virDomainControllerModel to virDomainControllerModelSCSI
Since we are about to add USB controller support let's remove the
ambiguity
2011-09-02 23:22:56 +08:00
Marc-André Lureau
329f907b99 Add various USB devices QEMU_CAPS 2011-09-02 23:22:56 +08:00
Eric Blake
e86789a5f2 tests: add missing files
Created by copying from qemuxml2argv-disk-drive-v2-wb.*, then
s/writeback/directsync/.  Hopefully this matches Osier's intentions.

* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-cache-directsync.args:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-cache-directsync.xml:
Add missing files needed by 'make check'.
2011-09-02 08:42:54 -06:00
Osier Yang
6ee52c1b76 Add directsync cache mode support for disk driver
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
    As even $prefix_CACHE_V2 is set, we can't known if directsync
    is supported.
2011-09-02 21:36:58 +08:00
Daniel P. Berrange
2d533a465a Fix command test wrt gnutls initialize & fix debugging
The VIR_TEST_DEBUG and VIR_TEST_VERBOSE env vars did not work
because we replaced 'environ' with 'newenv'. Simply calling
virTestGetDebug/Verbose() before replacing the 'environ' ensures
we have processed the env variables.

The gnutls initialization code opens /dev/urandom and keeps that
FD around for later use. We have code which kills off FDs 3-5
to avoid interfereing with our test case. Move the virInitialize
call before this point, so it kills off the gnutls /dev/urandom
FD which is irrelevant for testing purposes

* tests/commandtest.c: Fix test debugging & make it robust against
  opened FDs
2011-08-25 12:05:54 +01:00
Eric Blake
baac9c37d7 virsh: properly interleave shared stdout and stderr
Without this patch, invoking 'virsh >file 2>&1' results in
error messages appearing before normal output, even if they
occurred later in time than the normal output (since stderr
is unbuffered, but stdout waits until a full buffer).

* tools/virsh.c (print_job_progress, vshError): Flush between
stream transitions.
* tests/undefine: Test it.
2011-08-19 09:22:22 -06:00
Eric Blake
d89dd42d51 maint: simplify lots of libxml2 clients
Repetitive patterns should be factored.  The sign of a good
factorization is a change that kills 5x more lines than it adds :)

* src/conf/domain_conf.c (virDomainDeviceDefParse)
(virDomainSnapshotDefParseString): Use new convenience macros.
* src/conf/storage_conf.c (virStoragePoolDefParseSourceString):
Likewise.
* src/cpu/cpu.c (cpuCompareXML, cpuBaselineXML): Likewise.
* src/esx/esx_vi.c (esxVI_Context_Execute): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationCookieXMLParseStr):
Likewise.
* src/security/virt-aa-helper.c (caps_mockup): Likewise.
* src/test/test_driver.c (testOpenFromFile): Likewise.
* tests/cputest.c (cpuTestLoadXML, cpuTestLoadMultiXML):
Likewise.
* tools/virsh.c (cmdFreecell, makeCloneXML, cmdVNCDisplay)
(cmdTTYConsole, cmdDetachInterface, cmdDetachDisk)
(cmdSnapshotCreate, cmdSnapshotCreateAs, cmdSnapshotCurrent)
(cmdSnapshotList, cmdSnapshotParent): Likewise.
2011-08-19 09:13:55 -06:00
Eric Blake
5f98c43707 test: rewrite test to match change in behavior
Test failure exposed in commit 7d3390f.

* tests/undefine: Fix to match updated test driver semantics.
2011-08-19 09:06:47 -06:00
Laine Stump
73c0a148af qemu: support event_idx parameter for virtio disk and net devices
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).

As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).

docs/formatdomain.html.in: document the new flag (marking it as
   "don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
   virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
   disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
    when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-15 09:35:42 -04:00
Jiri Denemark
5d30db09a6 Support changing UNIX socket owner in virNetSocketNewListenUNIX
This patch allows owner's UID to be changed as well.
2011-08-15 15:21:31 +02:00
Jiri Denemark
70e4295bc4 Add backlog parameter to virNetSocketListen
So that callers can change the default value.
2011-08-15 15:21:31 +02:00
Eric Blake
be427e8b0b build: fix recent build failures
With gcc 4.5.1:

util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]

Then in tests/commandtest.c, the new virPidFile APIs need to be used.

* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.
2011-08-12 16:16:29 -06:00
Eric Blake
9a0ec36346 virsh: don't reject undefine on active domain
The public API documents that undefine may be used to transition a
running persistent domain into a transient one.  Many drivers still
do not support this usage, but virsh shouldn't be getting in the
way of those that do support it.

This also drops a redundant conditional; vshCommandOptString
guaranteed that name was non-NULL.

* tools/virsh.c (cmdUndefine): Allow undefine on active domains;
the drivers may still reject it, but it is a valid API usage.
* tests/undefine (error): Fix the test to match.
2011-08-12 07:39:25 -06:00
Cole Robinson
d30d572650 qemu: Fix -chardev udp if parameters are omitted
The following XML:

    <serial type='udp'>
      <source mode='connect' service='9999'/>
    </serial>

is accepted by domain_conf.c but maps to the qemu command line:

-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)

qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport

Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
2011-08-11 15:19:51 +08:00
Matthias Bolte
099d30a825 Fix detection of GnuTLS 1.x.y
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.

Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.

Also fix header guard in gnutls_1_0_compat.h.
2011-08-03 19:22:29 +02:00
Laine Stump
513122ae93 network: don't forward DNS requests from isolated networks
This is in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=723862

which points out that a guest on an "isolated" network could
potentially exploit the DNS forwarding provided by dnsmasq to create a
communication channel to the outside.

This patch eliminates that possibility by adding the "--no-resolv"
argument to the dnsmasq commandline, which tells dnsmasq to not
forward on any requests that it can't resolve itself (by looking at
its own static hosts files and runtime list of dhcp clients), but to
instead return a failure for those requests.

This shouldn't cause any undesirable change from current
behavior, even in the case where a guest is currently configured with
multiple interfaces, one of them being connected to an isolated
network, and another to a network that does have connectivity to the
outside. If the isolated network's DNS server is queried for a name
it doesn't know, it will return "Refused" rather than "Unknown", which
indicates to the guest that it should query other servers, so it then
queries the connected DNS server, and gets the desired response.
2011-07-29 17:23:55 -04:00
Eric Blake
343ab98229 build: avoid non-portable shell in test setup
POSIX states that 'a=1; a=2 b=$a command' has unspecified results
for the value of $b visible within command.  In particular, on
BSD, this resulted in PATH not picking up the in-test ssh.

* tests/Makefile.am (lv_abs_top_builddir): New macro.
(path_add, TESTS_ENVIRONMENT): Use it to avoid referring to an
environment variable set previously within the same command line.
Reported by Matthias Bolte.
2011-07-29 11:47:18 -06:00
Matthias Bolte
f2ac5807b9 tests: Don't use bash if we don't have to
This tested failed on FreeBSD because it was using bash, that might
not be installed.
2011-07-29 17:17:21 +02:00
Matthias Bolte
b590866bdb freebsd: Fix build problem due to picking up the wrong libvirt.h
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-07-29 07:35:54 -06:00
Matthias Bolte
c0e5994aef freebsd: Avoid /bin/true in commandtest
Rely on PATH and use just true, because on FreeBSD it's /usr/bin/true.
2011-07-29 12:12:58 +02:00
Matthias Bolte
cffba7ea3e tests: Unify style of test skipping code
Prefer 'return EXIT_AM_SKIP' over 'exit(EXIT_AM_SKIP)'.

Prefer 'int main(void)' over 'int main(int argc, char **argv)'.

Fix mymain signature in commandtest and nodeinfotest.
2011-07-29 12:12:58 +02:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Laine Stump
ef79fb5b5f conf: add <listen> subelement to domain <graphics> element
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.
2011-07-28 13:46:39 -04:00
Daniel P. Berrange
4d349ef7be Fix build with gnutls 1.0.x branch 2011-07-26 14:51:03 +01:00
Laine Stump
d6354c1696 util: change virFile*Pid functions to return < 0 on failure
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).

This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
2011-07-25 16:56:26 -04:00
Daniel P. Berrange
677258ab02 Fix import of private key with older gnutls
With older GNUTLS the gnutls_x509_privkey_import function is
unable to import our private key. Instead we must use the
alternative gnutls_x509_privkey_import_pkcs8() (as certtool
does).

* virnettlscontexttest.c: Fix import of private key with
  older gnutls. Also add missing newlines to key
2011-07-25 13:47:11 -06:00
Daniel P. Berrange
567b8d69b9 Fix TLS context tests with expired certs
commit 5283ea9b1d changed the
semantics of the 'expire_offset' field in the test case struct
so that instead of being an absolute timestamp, it was a delta
relative to the current time. This broke the test cases which
were testing expiry of certificates, by putting the expiry
time into the future, instead of in the past.

Fix this by changing the expiry values to be negative, so that
the delta goes into the past again.

* virnettlscontexttest.c: Fix expiry tests
2011-07-25 16:21:19 +01:00
Eric Blake
d1f144d6fe tests: detect gnutls errors
* tests/virnettlscontexttest.c (testTLSLoadKey): Report errors.
2011-07-25 13:51:50 +08:00
Michal Privoznik
2b9efcb3df bandwidth: Add domain schema and xml2xml tests 2011-07-25 13:50:20 +08:00
Michal Privoznik
e5f1f9de77 bandwidth: Add test cases for network 2011-07-25 13:50:06 +08:00
Eric Blake
5283ea9b1d tests: fix compilation failures
Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed.  Skip the test rather than failing
compilation in that case.

With newer gcc, the test consumed too much stack space.  Move
things to static storage to fix that.

* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.
2011-07-25 13:48:26 +08:00
Daniel P. Berrange
bd789dff80 Add a test case for certificate validation
This test case checks certification validation rules for

 - Basic constraints
 - Key purpose
 - Key usage
 - Start/expiry times

It checks initial context creation sanity checks, and live
session validation
2011-07-22 15:18:32 +01:00
Oskari Saarenmaa
6b01c83a63 remote/ssh: optional "keyfile" parameter.
New optional parameter "keyfile" for ssh transport allows the user to select
the private key to be used to authenticate to the remote host.
2011-07-22 07:49:49 -06:00
Laine Stump
04711a0f32 network: internal API functions to manage assignment of physdev to guest
The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:

networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.

networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.

networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.

bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.

qemu_(command|driver|hotplug|process).c - add calls to the above APIs
    in the appropriate places.

tests/Makefile.am - we need to include libvirt_driver_network.la
    whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
    symbols (in functions that are never called by the test
    programs...)
2011-07-21 14:47:19 -04:00
Laine Stump
40fd7073be conf: support abstracted interface info in network XML
The network XML is updated in the following ways:

1) The <forward> element can now contain a list of forward interfaces:

     <forward .... >
       <interface dev='eth10'/>
       <interface dev='eth11'/>
       <interface dev='eth12'/>
       <interface dev='eth13'/>
     </forward>

   The first of these takes the place of the dev attribute that is
   normally in <forward> - when defining a network you can specify
   either one, and on output both will be present. If you specify
   both on input, they must match.

2) In addition to forward modes of 'nat' and 'route', these new modes
   are supported:

     private, passthrough, vepa - when this network is referenced by a
     domain's interface, it will have the same effect as if the
     interface had been defined as type='direct', e.g.:

        <interface type='direct'>
          <source mode='${mode}' dev='${dev}>
          ...
        </interface>

     where ${mode} is one of the three new modes, and ${dev} is an interface
     selected from the list given in <forward>.

     bridge - if a <forward> dev (or multiple devs) is defined, and
     forward mode is 'bridge' this is just like the modes 'private',
     'passthrough', and 'vepa' above. If there is no forward dev
     specified but a bridge name is given (e.g. "<bridge
     name='br0'/>"), then guest interfaces using this network will use
     libvirt's "host bridge" mode, equivalent to this:

       <interface type='bridge'>
          <source bridge='${bridge-name}'/>
          ...
       </interface>

3) A network can have multiple <portgroup> elements, which may be
   selected by the guest interface definition (by adding
   "portgroup='${name}'" in the <source> element along with the
   network name). Currently a portgroup can only contain a
   virtportprofile, but the intent is that other configuration items
   may be put there int the future (e.g. bandwidth config). When
   building a guest's interface, if the <interface> XML itself has no
   virtportprofile, and if the requested network has a portgroup with
   a name matching the name given in the <interface> (or if one of the
   network's portgroups is marked with the "default='yes'" attribute),
   the virtportprofile from that portgroup will be used by the
   interface.

4) A network can have a virtportprofile defined at the top level,
   which will be used by a guest interface when connecting in one of
   the 'direct' modes if the guest interface XML itself hasn't
   specified any virtportprofile, and if there are also no matching
   portgroups on the network.
2011-07-21 14:46:53 -04:00
Laine Stump
07f4136993 conf: support abstracted interface info in domain interface XML
the domain XML <interface> element is updated in the following ways:

1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')

2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.

3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.

The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
2011-07-21 14:46:44 -04:00
Eric Blake
8e22e08935 build: rename files.h to virfile.h
In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.
2011-07-21 10:34:51 -06:00
Wen Congyang
c4441fee10 qemu: Implement period and quota tunable XML configuration and parsing
This patch implements period and quota tunable XML configuration and parsing.
A quota or period of zero will be simply ignored.
2011-07-21 17:11:12 +08:00
Osier Yang
fff9d71a65 tests: Fix virshtest failure after dominfo changed
Caused by the new changed "dominfo" command.
2011-07-19 20:48:15 +08:00
Jiri Denemark
f580a33ffd virsh: fix previous patch
The last patch breaks make check for two reasons. First, it reverses the
condition but leaves default level unchanged, so instead of not printing
anything but errors before the patch it now prints all debug messages by
default. Second, you forgot to change -d5 option passed to virsh in
tests/virsh-optparse to -d0; the script wants to see all debug messages.
2011-07-14 07:14:05 -06:00
Daniel P. Berrange
ebbae359ff Change extract pidfile & monitor config from QEMU command line
When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
  pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
  params when calling qemuParseCommandLineString
2011-07-12 15:39:04 +01:00
Oskari Saarenmaa
9a0e6a8fae remote/ssh: support for no_verify.
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified.  This won't disable host key
checking for already known hosts.  Includes a test and documentation.
2011-07-12 15:09:05 +02:00
Matthias Bolte
aa14709a47 Add domain type checking
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.
2011-07-11 19:38:51 +02:00
Eric Blake
9693e29395 tests: simplify formatting
The shell version would output 40 extra spaces for a test with
a multiple of 40 sub-tests, and the C version can use the same
printf optimization for avoiding a loop over single space output
as the shell version.

* tests/testutils.c (virtTestMain): Avoid loop for alignment.
* tests/test-lib.sh: Fix formatting when counter is multiple of 40.
2011-07-11 09:21:37 -06:00
Jim Fehlig
eb3143154e Do not drop kernel cmdline for xen pv domains
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified.  The current config-to-sxpr mapping
ignores cmdline when bootloader is present.

Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.

V2: Fix existing testcase broken by this patch and add new testcases
2011-07-11 09:11:15 -06:00
Michal Privoznik
874e65aa15 bios: Add support for SGA
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
2011-07-11 11:47:14 +02:00
Matthias Bolte
c3ab6b2b53 tests: Improve output of tests that decide to skip at runtime
Don't print OK/FAIL for tests that decide to be skipped after
calling virtTestMain. Delay printing of the indentation before
the first test until we know that the test didn't decide to be
skipped.

Also make the reconnect test use VIRT_TEST_MAIN.
2011-07-09 15:47:57 +02:00
Matthias Bolte
b1c9bf27cb tests: Fix compressed test output padding logic
The current logic tries to count from 1 to 40 and ignores paddings
of 0 and 1 to 40. This doesn't work for counter + 1 mod 40 == 0
like here for counter value 159

TEST: virsh-all
      ........................................ 40
      ........................................ 80
      ........................................ 120
      ....................................... 159 OK
PASS: virsh-all

Also seq isn't portable. Therefore, calculate the correct padding
length directly and use printf to output it at once.
2011-07-09 15:40:23 +02:00
Matthias Bolte
4540f8d227 tests: Use EXIT_AM_SKIP instead of 77 directly 2011-07-09 10:14:38 +02:00
Michal Privoznik
30c43afd73 graphics: add support for action_if_connected in qemu
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
2011-07-08 17:00:43 +02:00
John Williams
a1092070d4 microblaze: Add architecture support
Add libvirt support for MicroBlaze architecture as a QEMU target.  Based on mips/mipsel pattern.

Signed-off-by: John Williams <john.williams@petalogix.com>
2011-07-07 17:49:21 -06:00
Jim Fehlig
41828514bb Skip some xen tests if xend is not running
Currently, the xen statstest and reconnect tests are only compiled
if xend is running.  Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.

This is in response to Eric's suggestion here

https://www.redhat.com/archives/libvir-list/2011-July/msg00367.html
2011-07-07 17:23:09 -06:00
Jim Fehlig
a34e193fb7 Fix compilation of statstest.c during make check 2011-07-07 10:15:05 -06:00
Matthias Bolte
3ab1776b7f tests: Disable networkxml2argvtest when configured without network
Reported by Ruben Kerkhof.
2011-07-05 15:26:18 +02:00
Eric Blake
5d382c57a1 build: avoid 'make syntax-check' failure
* tests/utiltest.c (DO_TEST): Fix indentation for cppi.
2011-07-01 16:46:20 -06:00
Matthias Bolte
ab0b2c1996 tests: Add a general util test
Move non-esx specific tests from esxutilstest there and add a
test for virParseVersionString.
2011-07-01 19:58:15 +02:00
Eric Blake
6ae3052c06 build: consistently use CFLAGS
According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process.  Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.

* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.
2011-07-01 10:44:17 -06:00
Daniel P. Berrange
20ce065124 Remove bogus jsondata.h file reference which does not exist
* tests/Makefile.am: Remove jsondata.h
2011-07-01 10:16:33 +01:00
Daniel P. Berrange
06da1805bf Add test case for parsing JSON docs
While investigating some memory leaks it was unclear whether the
JSON code correctly free'd all memory during parsing. Add a test
case which can be run under valgrind to clearly demonstrate that
the parser is leak free.

* tests/Makefile.am: Add 'jsontest'
* tests/jsontest.c: A few simple JSON parsing tests
2011-06-30 18:04:02 +01:00
Osier Yang
e5b9f355b0 tests: Add valgrind.supp into EXTRA_DIST 2011-06-30 23:23:23 +08:00
Osier Yang
a2753079da tests: Fix memory leak in virnetmessagetest
Detected when playing with "make -C tests valgrind".
2011-06-29 10:47:54 +08:00
Matthias Bolte
9523b3c320 network: Fix dnsmasq hostsfile creation logic and related tests
networkSaveDnsmasqHostsfile was added in 8fa9c22142 (Apr 2010).
It has a force flag. If the dnsmasq hostsfile already exists force
needs to be true to overwrite it. networkBuildDnsmasqArgv sets force
to false, networkDefine sets it to true. This results in the
hostsfile being written only in networkDefine in the common case.
If no error occurred networkSaveDnsmasqHostsfile returns true and
networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq
command line.

networkSaveDnsmasqHostsfile was changed in 89ae9849f7 (24 Jun 2011)
to return a new dnsmasqContext instead of reusing one. This change broke
the logic of the force flag as now networkSaveDnsmasqHostsfile returns
NULL on error, but the early return -- if force was not set and the
hostsfile exists -- returns 0. This turned the early return in an error
case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option
anymore if the hostsfile already exists. It did because networkDefine
created the hostsfile already.

Then 9d4e2845d4 fixed the return 0 case in networkSaveDnsmasqHostsfile
but didn't apply the force option correctly to the new addnhosts file.
Now force doesn't control an early return anymore, but influences the
handling of the hostsfile context creation and dnsmasqSave is always
called now. This commit also added test cases that reveal several
problems. First, the tests now calls functions that try to write the
dnsmasq config files to disk. If someone runs this tests as root this
might overwrite actively used dnsmasq config files, this is a no-go. Also
the tests depend on configure --localstatedir, this needs to be fixed as
well, because it makes the tests fail when localstatedir is different
from /var.

This patch does several things to fix this:

1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv
to the caller to separate the command line generation from the config
file writing. This makes the command line generation testable without the
risk of interfering with system files, because the tests just don't call
dnsmasqSave.

2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag
useless as the saving happens somewhere else now. This fixes the wrong
usage of the force flag in combination with then newly added addnhosts
file by removing the force flag.

3) Adapt the wrong test cases to the correct behavior, by adding the
missing --dhcp-hostsfile option. Both affected tests contain DHCP host
elements but missed the necessary --dhcp-hostsfile option.

4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile,
because it doesn't save the dnsmasqContext anymore.

5) Move all directory creations in dnsmasq context handling code from
the *New functions to dnsmasqSave to avoid directory creations in system
paths in the test cases.

6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext
anymore the test case can create one with the localstatedir that is
expected by the tests instead of the configure --localstatedir given one.
2011-06-29 01:59:34 +02:00
Laine Stump
25171f607c network: add domain to unqualified names defined with <host>
If a domain name is defined for a network, add the --expand-hosts
option to the dnsmasq commandline. This results in the domain being
added to any hostname that is defined in a dns <host> element and
contains no '.' characters (i.e. it is an "unqualified"
hostname). Since PTR records are automatically created for any name
defined in <host>, the result of a PTR request will change from the
unqualified name to the qualified name.

This also has the same effect on any hostnames that dnsmasq reads
from the host's /etc/hosts file.

(In the case of guest hostnames that were learned by dnsmasq via DHCP
requests, they were already getting the domain name added on, even
without --expand-hosts).
2011-06-28 12:57:14 -04:00
Matthias Bolte
072ea80ff2 tests: Partly fix networkxml2argvtest being configure result dependent
Convert networkDnsmasqLeaseFileName to a replaceable function pointer
that allow the testsuite to use a version of that function that is not
depending on configure --localstatedir.

This fixes 5 of 6 test failures, when configure --localstatedir isn't
set to /var.
2011-06-27 17:22:25 +02:00
Eric Blake
2abb4616a0 build: avoid long line tests
'make syntax-check' regression introduced in commit 60b9c69.

* tests/networkxml2argvdata/*.argv: Break long lines.
2011-06-24 15:34:28 -06:00
Michal Novotny
9d4e2845d4 Network: Add support for DNS hosts definition to the network XML
This commit introduces names definition for the DNS hosts file using
the following syntax:

  <dns>
    <host ip="192.168.1.1">
      <name>alias1</name>
      <name>alias2</name>
    </host>
  </dns>

Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
2011-06-24 16:15:36 -04:00
Michal Novotny
60b9c69313 Network: Add regression tests for the command-line arguments
The regression testing done by comparison of command-line
generated from the network XML file and the expected
command-line arguments (read from file).

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2011-06-24 16:15:27 -04:00
Michal Novotny
5dd986dbd7 Add TXT record support for virtual DNS service
This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:

  <dns>
    <txt name="example" value="example value" />
  </dns>

Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
2011-06-24 16:15:12 -04:00
Matthias Bolte
d772167f6d tests: Improve IPv6 detection for virNetSocket tests
getifaddrs can return an IPv6 address, but getaddrinfo can fail
for an IPv6 address. Cover this combination.
2011-06-24 18:46:06 +02:00
Eric Blake
acb31cf59b maint: typo fixes
* src/xenxs/xen_sxpr.c (xenParseSxprPCI): Comment fix.
* tests/object-locking.ml (driverTables): Likewise.
* tests/testutils.c (virtTestDifferenceBin): Likewise.
2011-06-24 08:01:10 -06:00
Daniel P. Berrange
42f43592be Support reboots with the QEMU driver
For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.

 - In qemuDomainObjPrivatePtr we have a bool fakeReboot
   flag.
 - The virDomainReboot method sets this flag and then
   triggers a normal 'system_powerdown'.
 - The QEMU process is started with '-no-shutdown'
   so that the guest CPUs pause when it powers off the
   guest
 - When we receive the 'POWEROFF' event from QEMU JSON
   monitor if fakeReboot is not set we invoke the
   qemuProcessKill command and shutdown continues
   normally
 - If fakeReboot was set, we spawn a background thread
   which issues 'system_reset' to perform a warm reboot
   of the guest hardware. Then it issues 'cont' to
   start the CPUs again

* src/qemu/qemu_command.c: Add -no-shutdown flag if
  we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
  qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
  system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
  fakeReboot is set
2011-06-24 12:13:47 +01:00
Daniel P. Berrange
58b5b14e5e Introduce a generic object for using network sockets
Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.

It can listen for UNIX and TCP stream sockets.

It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
  sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests
2011-06-24 11:48:18 +01:00
Daniel P. Berrange
ceacc1dd4f Provide a simple object for encoding/decoding RPC messages
This provides a new struct that contains a buffer for the RPC
message header+payload, as well as a decoded copy of the message
header. There is an API for applying a XDR encoding & decoding
of the message headers and payloads. There are also APIs for
maintaining a simple FIFO queue of message instances.

Expected usage scenarios are:

To send a message

   msg = virNetMessageNew()

   ...fill in msg->header fields..
   virNetMessageEncodeHeader(msg)
   ...loook at msg->header fields to determine payload filter
   virNetMessageEncodePayload(msg, xdrfilter, data)
   ...send msg->bufferLength worth of data from buffer

To receive a message

   msg = virNetMessageNew()
   ...read VIR_NET_MESSAGE_LEN_MAX of data into buffer
   virNetMessageDecodeLength(msg)
   ...read msg->bufferLength-msg->bufferOffset of data into buffer
   virNetMessageDecodeHeader(msg)
   ...look at msg->header fields to determine payload filter
   virNetMessageDecodePayload(msg, xdrfilter, data)
   ...run payload processor

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal
  message handling API.
* testutils.c, testutils.h: Helper for printing binary differences
* virnetmessagetest.c: Validate all XDR encoding/decoding
2011-06-24 11:48:14 +01:00
Michal Privoznik
017abcbb1a qemu: domain I/O asynchronous handling
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
2011-06-22 09:26:24 +02:00
Osier Yang
b369114de6 numatune: Add tests for numatune XML
Only add tests for qemuxmlargvtest.c, as there is no qemu command line
for numatune XML, just want to make sure the XML could be validated
well.
2011-06-20 15:17:43 +08:00
Jiri Denemark
c3068d4d23 qemu: Translate boot config into bootindex if possible
Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.
2011-06-15 11:29:09 +02:00
Marc-André Lureau
98bfdff12c spice: add <clipboard copypaste='yes|no'> option
From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste

https://bugzilla.redhat.com/show_bug.cgi?id=693661
2011-06-14 17:03:26 -06:00
Guido Günther
acc7080a1d Skip nodeinfo test on non intel architectures
since the testfiles assume a /proc/cpuinfo specific to this
architecture. We e.g. can't parse the number of cores on other
architectures.
2011-06-14 22:32:51 +02:00
Wen Congyang
1b29646e60 tests: add a test for multi function PCI device 2011-06-13 09:27:22 +08:00
Wen Congyang
d58c382e93 check whether qemu supports multi function PCI device
qemu supports multi function PCI device at least version 0.13.0.
2011-06-13 09:27:21 +08:00
Daniel P. Berrange
1ea83207c8 Support leases in guest XML and lock manager
A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML

  <devices>
     ...
     <lease>
       <lockspace>somearea</lockspace>
       <key>thequickbrownfoxjumpsoverthelazydog</key>
       <target path='/some/lease/path' offset='23432'/>
     </lease>
     ...
  </devices>

The 'lockspace' is a unique identifier for the lockspace which
the lease is associated

The 'key' is a unique identifier for the resource associated
with the lease.

The 'target' is the file on disk where the leases are held.

* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
  tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
  tests/qemuxml2xmltest.c: Test XML handling for leases
2011-06-02 10:54:00 +01:00
Eric Blake
b43e78f76b tests: really fix QEMU XML-2-ARGV graphics-spice-timeout test
Alas, /usr/bin/kvm is also not directly supported by testutilsqemu.c.

In fact, _any_ test that uses <cpu match=...> has to use our faked
qemu.sh in order to properly answer the 'qemu -cpu ?' probe done
during qemu command line building.

* tests/qemuxml2argvdata/*graphics-spice-timeout*: Switch emulator, again.
2011-06-01 15:41:24 -06:00
Jiri Denemark
f5534a135e tests: Add a test for correct disk device ordering 2011-06-01 19:14:08 +02:00
Jiri Denemark
c1a98d8825 Fix order of disks and controllers
Commit 2d6adabd53 replaced qsorting disk
and controller devices with inserting them at the right position. That
was to fix unnecessary reordering of devices. However, when parsing
domain XML devices are just taken in the order in which they appear in
the XML since. Use the correct insertion algorithm to honor device
target.
2011-06-01 19:11:58 +02:00
Matthias Bolte
3bb35a52be Fix QEMU XML-2-ARGV graphics-spice-timeout test
The test used an emulator that is not supported in testutilsqemu.c.
Switch from qemu-kvm to kvm to fix this.
2011-06-01 18:34:59 +02:00
Matthias Bolte
d6caacd1e4 openvz: Add simple test for openvzReadNetworkConf
Convert openvzLocateConfFile to a replaceable function pointer to
allow testing the config file parsing without rewriting the whole
OpenVZ config parsing to a more testable structure.
2011-06-01 11:58:15 +02:00
Michal Privoznik
7693c03973 tests: Add more complex domain scheme test data 2011-05-31 17:10:16 +02:00
Michal Privoznik
dbb7ebe937 tests: Test for SPICE compression options
and check regression
2011-05-31 16:33:36 +02:00
Matthias Bolte
8357d91b65 esx: Fix regression in absolute file name handling
Before commit 145d6cb05c (in August 2010) absolute file names
in VMX and domain XML configs were handled correctly. But this got
lost during the refactoring. The test cases didn't highlight this
problem because they have their own set of file name handling
functions. The actual ones require a real connection to an ESX
server. Also the test case functions always worked correctly.

Fix the regression and add a new in-the-wild VMX file that contains
such a problematic absolute path. Even though this test case won't
protect against new regressions.

Reported by lofic (IRC nick)
2011-05-26 23:32:44 +02:00
Matthias Bolte
4a3a029024 openvz: Add simple testcase for config file parsing function
This testcase passes before the regression is added in f0443765, fails
after that commit and passes again after the regression was fixed.
2011-05-26 22:43:40 +02:00
Matthias Bolte
cded0c80b0 time_t is not a long on FreeBSD, switch internal type to long long 2011-05-25 18:47:33 +02:00
Laine Stump
51781b82f7 qemu: fix typo in name - should be VHOST_NET, not VNET_HOST
NB: the enum that uses the string vnet-host (now changed to vhost-net)
is used in XML, but fortunately that hasn't been in an official
release yet, so it can still be fixed.
2011-05-24 10:45:55 -04:00
Daniel P. Berrange
58765b58a3 Fix QEMU -vnc arg generation with raw IPv6 addresses
Since -vnc uses ':' to separate the address from the port, raw
IPv6 addresses need to be escaped like [addr]:port

* src/qemu/qemu_command.c: Escape raw IPv6 addresses with []
* tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak
  to test Ipv6 escaping
* docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames
  in <graphics> listen attributes
2011-05-24 10:33:53 -04:00
Alon Levy
bb1c5423b9 spice: support streaming-video parameter
This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).

Usage:

    <graphics type='spice' autoport='yes'>
      <streaming mode='off'/>
    </graphics>

Tested with the above and with tests/qemuxml2argvtest.

Signed-off-by: Alon Levy <alevy@redhat.com>
2011-05-23 20:53:59 -06:00
Stefan Berger
fcb0e8c227 nwfilter: enable filtering of gratuitous ARP packets
This patch enables filtering of gratuitous ARP packets using the following XML:

<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>
2011-05-23 19:41:18 -04:00
Eric Blake
1d8bcb45ca maint: mark more perl scripts executable
* src/remote/rpcgen_fix.pl: Add executable bit.
* tests/oomtrace.pl: Likewise.
2011-05-16 10:12:21 -06:00
Wen Congyang
72a85f5b3f test: all test_scripts should be part of tarball when building without libvirtd
Steps to reproduce this problem:
1. # ./autogen.sh --without-libvirtd
2. # make dist
3. # rpmbuild --nodeps --define "_sourcedir `pwd`" -ba libvirt.spec
   ...
   make  check-TESTS
   make[1]: Entering directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.1/tests'
   make[1]: *** No rule to make target `test_conf.sh', needed by `check-TESTS'.  Stop.
   make[1]: Leaving directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.1/tests'
   make: *** [check-am] Error 2
   error: Bad exit status from /var/tmp/rpm-tmp.7Rb9PV (%check)
2011-05-14 13:46:00 +08:00
Eric Blake
70ea7decbe tests: avoid crash when run under gcov
Running ./autobuild.sh failed when gcov is installed, because
commandtest ended up crashing during gcov's getenv() call after
exit() had already started.  I traced this nasty bug back to
a scoping issue present since the test introduction.

* tests/commandtest.c (mymain): Move newenv...
(newenv): ...to a scope that is still useful during exit().
2011-05-11 09:58:35 -06:00
Paolo Bonzini
e547e44cb0 xen: parse and generate hpet item in sxpr
Recent versions of Xen disable the virtual HPET by default.  This is
usually more precise because tick policies are not implemented for
the HPET in Xen.  However, there may be several reasons to control
the HPET manually: 1) to test the emulation; 2) because distros may
provide the knob while leaving the default to "enabled" for compatibility
reasons.

This patch provides support for the hpet item in both sexpr and xm
formats, and translates it to a <timer> element.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-05-10 16:16:55 -06:00
Eric Blake
68ea80cfdd maint: rename virBufferVSprintf to virBufferAsprintf
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose.  Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.

global rename performed with:

$ git grep -l virBufferVSprintf \
  | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'

then revert the changes in ChangeLog-old.
2011-05-05 13:47:40 -06:00
Eric Blake
4b4e8b57c2 tests: avoid null pointer dereference
Unlikely to hit in real life, but clang noticed it.

* tests/commandtest.c (checkoutput, test4, test18): Avoid
unlink(NULL) on OOM.
2011-05-03 10:50:56 -06:00
Eric Blake
3109d2bffa tests: suppress more valgrind situations
* tests/.valgrind.supp: Consolidate bash suppressions.  Ignore
more libnl issues.
2011-05-03 08:03:39 -06:00
Eric Blake
0620e83d10 tests: avoid compiler warning
../../tests/xmconfigtest.c: In function 'testCompareParseXML':
../../tests/xmconfigtest.c:49:19: error: 'conn' may be used uninitialized in this function [-Wuninitialized]

* tests/xmconfigtest.c (testCompareParseXML): Initialize variable.
2011-05-02 17:35:18 -06:00
Matthias Bolte
9ba4eb3c08 tests: Lower stack usage below 4096 bytes
Make virtTestLoadFile allocate the buffer to read the file into.

Fix logic error in virtTestLoadFile, stop reading on the first empty line.

Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual
buffer handling.
2011-04-30 19:59:52 +02:00
Matthias Bolte
88823ec90a tests: Update valgrind suppressions file 2011-04-30 19:33:58 +02:00
Eric Blake
701bee0193 hash: fix memory leak regression
Commit 1671d1d introduced a memory leak in virHashFree, and
wholesale table corruption in virHashRemoveSet (elements not
requested to be freed are lost).

* src/util/hash.c (virHashFree): Free bucket array.
(virHashRemoveSet): Don't lose elements.
* tests/hashtest.c (testHashCheckForEachCount): New method.
(testHashCheckCount): Expose the bug.
2011-04-29 14:26:40 -06:00
Eric Blake
e39c46a5fd build: fix getcwd portability problems
* bootstrap.conf (gnulib_modules): Add getcwd-lgpl.
* tests/commandtest.c (checkoutput): Drop unused cwd.
* tests/commandhelper.c (main): Let getcwd malloc.
* tests/testutils.c (virTestMain): Likewise.
* tools/virsh.c (cmdPwd): Likewise.
(virshCmds): Expose cmdPwd and cmdCd on mingw.
2011-04-29 12:08:26 -06:00
Eric Blake
20986e58aa tests: simplify common setup
A few of the tests were missing basic sanity checks, while most
of them were doing copy-and-paste initialization (in fact, some
of them pasted the argc > 1 check more than once!).  It's much
nicer to do things in one common place, and minimizes the size of
the next patch that fixes getcwd usage.

* tests/testutils.h (EXIT_AM_HARDFAIL): New define.
(progname, abs_srcdir): Define for all tests.
(VIRT_TEST_MAIN): Change callback signature.
* tests/testutils.c (virtTestMain): Do more common init.
* tests/commandtest.c (mymain): Simplify.
* tests/cputest.c (mymain): Likewise.
* tests/esxutilstest.c (mymain): Likewise.
* tests/eventtest.c (mymain): Likewise.
* tests/hashtest.c (mymain): Likewise.
* tests/networkxml2xmltest.c (mymain): Likewise.
* tests/nodedevxml2xmltest.c (myname): Likewise.
* tests/nodeinfotest.c (mymain): Likewise.
* tests/nwfilterxml2xmltest.c (mymain): Likewise.
* tests/qemuargv2xmltest.c (mymain): Likewise.
* tests/qemuhelptest.c (mymain): Likewise.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qparamtest.c (mymain): Likewise.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/sockettest.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/virbuftest.c (mymain): Likewise.
* tests/virshtest.c (mymain): Likewise.
* tests/vmx2xmltest.c (mymain): Likewise.
* tests/xencapstest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* tests/xml2sexprtest.c (mymain): Likewise.
* tests/xml2vmxtest.c (mymain): Likewise.
2011-04-29 10:21:20 -06:00
Eric Blake
8a6e30f124 build: fix 32-bit test failure
Same fix as commit 1fc288e1e2.

* tests/hashtest.c (testHashRemoveForEach): Use correct format.
2011-04-27 10:46:12 -06:00
Jiri Denemark
91e12a5094 tests: More unit tests for internal hash APIs
This adds several tests for remaining hash APIs (custom
hasher/comparator functions are not covered yet, though).

All tests pass both before and after the "Simplify hash implementation".
2011-04-27 15:32:30 +02:00
Eric Blake
1fc288e1e2 build: fix 32-bit test failure
ARRAY_CARDINALITY is typed as size_t, not long; this matters on 32-bit
platforms:

hashtest.c: In function 'testHashRemoveForEach':
hashtest.c:114: error: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [-Wformat]

* tests/hashtest.c (testHashRemoveForEach): Use correct format.
2011-04-21 08:23:59 -06:00
Jiri Denemark
b0d28307c8 tests: Unit tests for internal hash APIs
This is a basic set of tests for testing removals of hash entries during
iteration.
2011-04-16 11:31:52 +02:00
Eric Blake
c2d92f6a9e tests: test recent virsh option parsing changes
* tests/virsh-optparse: New file.
* tests/Makefile.am (test_scripts): Use it.
2011-04-15 16:19:22 -06:00
Michal Novotny
2ac455c4d2 Introduce virDomainChrDefNew()
Make: passed
Make check: passed
Make syntax-check: passed

this is the commit to introduce the function to create new character
device definition for the domain as advised by Cole Robinson
<crobinso@redhat.com>.

The function is used on the relevant places and also new tests has
been added.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2011-04-14 10:29:39 -06:00
Michal Privoznik
abb1570eac Spice: support audio, images and stream compression
This extends the SPICE XML to allow variable compression settings for audio,
images and streaming:
    <graphics type='spice' port='5901' tlsPort='-1' autoport='yes'>
        <image compression='auto_glz'/>
        <jpeg compression='auto'/>
        <zlib compression='auto'/>
        <playback compression='on'/>
    </graphics>

All new elements are optional.
2011-04-14 10:23:59 -06:00
Stefan Berger
6ab24feb44 nwfilters: support for TCP flags evaluation
This patch adds support for the evaluation of TCP flags in nwfilters.

It adds documentation to the web page and extends the tests as well.
Also, the nwfilter schema is extended.

The following are some example for rules using the tcp flags:

<rule action='accept' direction='in'>
    <tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/>
</rule>
<rule action='drop' direction='in'>
    <tcp state='NONE' flags='SYN/ALL'/>
</rule>
2011-04-07 20:13:38 -04:00
Eric Blake
25b39315d6 tests: fix recent test failures
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Reflect reserved VGA
port change.
2011-04-06 10:05:14 -06:00
Daniel P. Berrange
a4e37ff1a3 Enable use of -Wold-style-definition compiler flag
A couple of functions were declared using the old style foo()
for no-parameters, instead of foo(void)

* src/xen/xen_hypervisor.c, tests/testutils.c: Replace () with (void)
  in some function declarations
* m4/virt-compile-warnings.m4: Enable -Wold-style-definition
2011-04-05 11:40:04 +01:00
Daniel P. Berrange
329e9dc629 Enable use of -Wmissing-noreturn
* src/internal.h: Define a ATTRIBUTE_NO_RETURN annotation
* src/lxc/lxc_container.c: Annotate lxcContainerDummyChild
  with ATTRIBUTE_NO_RETURN
* tests/eventtest.c: Mark async thread as ATTRIBUTE_NO_RETURN
* m4/virt-compile-warnings.m4: Enable -Wmissing-noreturn
2011-04-05 11:39:58 +01:00
Daniel P. Berrange
7d76d5d506 Enable -Wmissing-format-attribute warning
Add a couple of missing ATTRIBUTE_FMT_PRINTF annotations

* tools/virsh.c, tests/testutils.c: Add printf format attribute
* m4/virt-compile-warnings.m4: Enable -Wmissing-format-attribute
2011-04-05 11:39:52 +01:00
Matthias Bolte
81800ff647 vmx: Support persistent CPU shares 2011-04-05 08:40:57 +02:00
Osier Yang
079ae9c7a1 cputune: New tests for cputune XML
v1 - v2:
  * Add missed tests/qemuxml2argvdata/qemuxml2argv-cputune.args
2011-03-29 22:13:46 +08:00
Eric Blake
d51023d4c2 qemu: fix restoring a compressed save image
Latent bug introduced in commit 2d6a581960 (Aug 2009), but not exposed
until commit 1859939a (Jan 2011).  Basically, when virExec creates a
pipe, it always marks libvirt's side as cloexec.  If libvirt then
wants to hand that pipe to another child process, things work great if
the fd is dup2()'d onto stdin or stdout (as with stdin: or exec:
migration), but if the pipe is instead used as-is (such as with fd:
migration) then qemu sees EBADF because the fd was closed at exec().

This is a minimal fix for the problem at hand; it is slightly racy,
but no more racy than the rest of libvirt fd handling, including the
case of uncompressed save images.  A more invasive fix, but ultimately
safer at avoiding leaking unintended fds, would be to _always and
atomically_ open all fds as cloexec in libvirt (thanks to primitives
like open(O_CLOEXEC), pipe2(), accept4(), ...), then teach virExec to
clear that bit for all fds explicitly marked to be handed to the child
only after forking.

* src/qemu/qemu_command.c (qemuBuildCommandLine): Clear cloexec
flag.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Tweak test.
2011-03-28 10:26:32 -06:00
Eric Blake
d0c7254bf1 tests: don't alter state in $HOME
Diego reported a bug where virsh tries to initialize a readline
history directory during 'make check' run as root, but fails
because /root was read-only.

It turns out that I could reproduce this as non-root, by using:

mv ~/.virsh{,.bak}
chmod a-w ~
make check -C tests TESTS=int-overflow
chmod u+w ~
mv ~/.virsh{.bak,}

* tests/int-overflow: Don't trigger interactive mode.
Reported by Diego Elio Pettenò.
2011-03-28 09:55:46 -06:00
Eric Blake
9ed545185f command: add virCommandAbort for cleanup paths
Sometimes, an asynchronous helper is started (such as a compressor
or iohelper program), but a later error means that we want to
abort that child.  Make this easier.

Note that since daemons and virCommandRunAsync can't mix, the only
time virCommandFree can reap a process is if someone did
virCommandRunAsync for a non-daemon and didn't stash the pid.

* src/util/command.h (virCommandAbort): New prototype.
* src/util/command.c (_virCommand): Add new field.
(virCommandRunAsync, virCommandWait): Track whether pid was used.
(virCommandFree): Reap child if caller did not request pid.
(virCommandAbort): New function.
* src/libvirt_private.syms (command.h): Export it.
* tests/commandtest.c (test19): New test.
2011-03-25 05:34:48 -06:00
Daniel P. Berrange
343eaa150b Move event code out of the daemon/ into src/util/
The event loop implementation is used by more than just the
daemon, so move it into the shared area.

* daemon/event.c, src/util/event_poll.c: Renamed
* daemon/event.h, src/util/event_poll.h: Renamed
* tools/Makefile.am, tools/console.c, tools/virsh.c: Update
  to use new virEventPoll APIs
* daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update
  to use new virEventPoll APIs
2011-03-07 14:16:13 +00:00
Osier Yang
82dfc6f38e qemu: Support vram for video of qxl type
For qemu names the primary vga as "qxl-vga":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE,...

  2) if vram is not specified for 2nd qxl device, (use the default
     set by global):

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

For qemu names all qxl devices as "qxl":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE ...

  2) if vram is not specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).

For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.

v1 - v2:
  * modify "virDomainVideoDefaultRAM" so that it returns 16M as the
    default vram_size for qxl device.

  * vram_size * 1024 (qemu accepts bytes for vram_size).

  * apply default vram_size for qxl device for which vram_size is
    not specified.

  * modify "graphics-spice" tests (more sensiable vram_size)

  * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
    to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).

v2 - v3:
  * Modify default video memory size for qxl device from 16M to 24M

  * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 22:00:27 +08:00
Eric Blake
3b750d136e maint: avoid long lines in more tests
* tests/xml2sexprdata/*.sexpr: Add backslash-newlines.
* tests/sexpr2xmldata/*.sexpr: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-aio.args: Likewise.
2011-03-03 07:45:31 -07:00
Michal Novotny
3ee7cf6c9b Add support for multiple serial ports into the Xen driver
this is the patch to add support for multiple serial ports to the
libvirt Xen driver. It support both old style (serial = "pty") and
new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.

Written and tested on RHEL-5 Xen dom0 and working as designed but
the Xen version have to have patch for RHBZ #614004 but this patch
is for upstream version of libvirt.

Also, this patch is addressing issue described in RHBZ #670789.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2011-02-25 11:33:27 -07:00
Daniel P. Berrange
f0e9dfeca9 Make commandtest more robust wrt its execution environment
When executed from cron, commandtest would fail to correctly
identify daemon processes. Set session ID and process group
IDs at startup to ensure we have a consistent environment to
run in.

* tests/commandtest.c: Call setsid() and setpgid()
2011-02-25 11:02:08 +00:00
Daniel P. Berrange
35416720c2 Put <stdbool.h> into internal.h so it is available everywhere
Remove the <stdbool.h> header from all source files / headers
and just put it into internal.h

* src/internal.h: Add <stdbool.h>
2011-02-24 12:04:06 +00:00
Jiri Denemark
9fc4b6a606 qemu: Switch over command line capabilities to virBitmap
This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
  with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
  enum values have to fit into int
2011-02-24 12:10:00 +01:00
Jiri Denemark
a96d08dc53 qemu: Use helper functions for handling cmd line capabilities
Three new functions (qemuCapsSet, qemuCapsClear, and qemuCapsGet) were
introduced replacing direct bit operations.
2011-02-24 12:07:06 +01:00
Jiri Denemark
21642e82b1 qemu: Rename QEMUD_CMD_FLAG_* to QEMU_CAPS_*
The new names comply more with the fact that they are all members of
enum qemuCapsFlags.
2011-02-24 12:05:39 +01:00
Markus Groß
3e53c7f954 Renamed functions in xenxs 2011-02-21 11:15:08 -07:00
Markus Groß
2e69e66e38 Moved XM formatting functions to xenxs 2011-02-21 11:14:52 -07:00
Markus Groß
1556ced2de Moved XM parsing functions to xenxs 2011-02-21 11:11:22 -07:00
Markus Groß
2f2a88b998 Moved SEXPR formatting functions to xenxs 2011-02-21 11:07:43 -07:00
Markus Groß
07129039cc Moved SEXPR parsing functions to xenxs 2011-02-21 10:53:53 -07:00
Laine Stump
5754dbd56d Give each virtual network bridge its own fixed MAC address
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463

The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".

The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).

Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.

I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.

Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).

docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
    auto-generate mac address when needed,
    create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
2011-02-17 13:36:32 -05:00
Laine Stump
e9bd5c0e24 Add txmode attribute to interface XML for virtio backend
This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
2011-02-17 11:07:58 -05:00
Jiri Denemark
aa3b2e40f5 tests: Fake host capabilities properly
Since we fake host CPU we should also fake host arch instead of taking
the real architecture tests are running on.
2011-02-15 22:51:37 +01:00
Wen Congyang
6bf4788e86 qemu: fix attach-interface regression
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()

The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.

So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.

tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()

set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-02-10 15:07:21 -07:00
Gui Jianfeng
d9b28a319a qemu: Implement blkio tunable XML configuration and parsing.
Implement blkio tunable XML configuration and parsing.

Reviewed-by: "Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com>
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-02-08 11:43:45 -07:00
Eric Blake
5a3ec56ba3 spicevmc: support older -device spicevmc of qemu 0.13.0
qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.
2011-02-04 09:17:01 -07:00
Eric Blake
79f9267f4b smartcard: add spicevmc support
Adds <smartcard mode='passthrough' type='spicevmc'/>, which uses the
new <channel name='smartcard'/> of <graphics type='spice'>.

* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainGraphicsSpiceChannelName): New
enum value.
(virDomainChrSpicevmcName): New enum.
(virDomainChrSourceDef): Distinguish spicevmc types.
* src/conf/domain_conf.c (virDomainGraphicsSpiceChannelName): Add
smartcard.
(virDomainSmartcardDefParseXML): Parse it.
(virDomainChrDefParseXML, virDomainSmartcardDefParseXML): Set
spicevmc name.
(virDomainChrSpicevmc): New enum conversion functions.
* src/libvirt_private.syms: Export new functions.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Conditionalize
name.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.args:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.xml:
Likewise.
2011-02-04 09:00:39 -07:00
Daniel P. Berrange
be87a1236e spicevmc: support new qemu chardev
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=615757

Add a new character device backend for virtio serial channels that
activates the QEMU spice agent on the main channel using the vdagent
spicevmc connection.  The <target> must be type='virtio', and supports
an optional name that specifies how the guest will see the channel
(for now, name must be com.redhat.spice.0).

<channel type='spicevmc'>
  <target type='virtio'/>
  <address type='virtio-serial' controller='1' bus='0' port='3'/>
</channel>

* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainChrType): New enum value.
* src/conf/domain_conf.c (virDomainChr): Add spicevmc.
(virDomainChrDefParseXML, virDomainChrSourceDefParseXML)
(virDomainChrDefParseTargetXML): Parse and enforce proper use.
(virDomainChrSourceDefFormat, virDomainChrDefFormat): Format.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildCommandLine): Add qemu support.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.xml: New
file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.args:
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-02-03 21:14:50 -07:00
Eric Blake
f5fd9baac1 smartcard: turn on qemu support
* src/qemu/qemu_command.c (qemuBuildCommandLine): Emit smartcard
options.
(qemuAssignDeviceAliases): Assign an alias for smartcards.
(qemuBuildControllerDevStr): Manage the usb-ccid controller.
* tests/qemuxml2argvtest.c (mymain): Add new tests.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.args: New
file.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough.args:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.args:
Likewise.
2011-02-03 19:32:41 -07:00
Eric Blake
7a2f29e4f9 smartcard: check for qemu capability
Qemu smartcard/spicevmc support exists on branches (such as
http://cgit.freedesktop.org/~alon/qemu/commit/?h=usb_ccid.v15&id=024a37b)
but is not yet upstream.  The added -help output matches a scratch build
that will be close to the RHEL 6.1 qemu-kvm.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_CCID_EMULATED)
(QEMUD_CMD_FLAG_CCID_PASSTHRU, QEMUD_CMD_FLAG_CHARDEV_SPICEVMC):
New flags.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags)
(qemuCapsParseDeviceStr): Check for smartcard capabilities.
(qemuCapsExtractVersionInfo): Tweak comment.
* tests/qemuhelptest.c (mymain): New test.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device: Likewise.
2011-02-03 19:28:53 -07:00
Eric Blake
ffdf478be2 smartcard: add XML support for <smartcard> device
Assuming a hypervisor that supports multiple smartcard devices in the
guest, this would be a valid XML description:

<devices>
  <smartcard mode='host'/>
  <smartcard mode='host-certificates'>
    <certificate>/path/to/cert1</certificate>
    <certificate>/path/to/cert2</certificate>
    <certificate>/path/to/cert3</certificate>
  </smartcard>
  <smartcard mode='passthrough' type='tcp'>
    <source mode='bind' host='127.0.0.1' service='2001'/>
    <protocol type='raw'/>
  </smartcard>
</devices>

(As of this commit, the qemu hypervisor will be the first
implementation, but it only supports one smartcard.)

* docs/formatdomain.html.in (Smartcard devices): New section.
* docs/schemas/domain.rng (smartcard): New define, used in
devices.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml: New file
to test schema.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml:
Likewise.
2011-02-03 19:27:43 -07:00
Juerg Haefliger
bd6c46fa0c tests: handle backspace-newline pairs in test input files
This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.

The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.
2011-01-31 11:25:34 -07:00
Eric Blake
e67ae61991 build: avoid close, system
* src/fdstream.c (virFDStreamOpenFile, virFDStreamCreateFile):
Use VIR_FORCE_CLOSE instead of close.
* tests/commandtest.c (mymain): Likewise.
* tools/virsh.c (editFile): Use virCommand instead of system.
* src/util/util.c (__virExec): Special case preservation of std
file descriptors to child.
2011-01-29 10:36:45 -07:00
Matthias Bolte
d9ad8ac392 Add VIR_DIV_UP to divide memory or storage request sizes with round up
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e0406c
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
2011-01-29 00:42:10 +01:00
Eric Blake
819269c4f0 qemu aio: enable support
qemu allows the user to choose what io storage api should be used,
either the default (threads) or native (linux aio) which in the latter
case can result in better performance.

Based on a patch originally by Matthias Dahl.

Red Hat Bugzilla #591703
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-01-28 09:09:49 -07:00
Matthias Dahl
f19357ce37 qemu aio: parse aio support from qemu -help
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-01-28 09:09:49 -07:00
Eric Blake
3fdc7895ec qemu: use separate alias for chardev and associated device
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Alter the
chardev alias.
(qemuBuildCommandLine): Output an id for the chardev counterpart.
* tests/qemuxml2argvdata/*: Update tests to match.
Reported by Daniel P. Berrange.
2011-01-27 13:55:35 -07:00
Jiri Denemark
cedf97e75a tests: Fix virtio channel tests
As noticed by Eric, commit 8e28c5d402,
which fixed generation of virtio-serial port numbers, forgot to adjust
test files which resulted in make check failure.
2011-01-27 19:00:36 +01:00
Eric Blake
a7483a5631 event: fix event-handling allocation crash
Regression introduced in commit e6b68d7 (Nov 2010).

Prior to that point, handlesAlloc was always a multiple of
EVENT_ALLOC_EXTENT (10), and was an int (so even if the subtraction
had been able to wrap, a negative value would be less than the count
not try to free the handles array).  But after that point,
VIR_RESIZE_N made handlesAlloc grow geometrically (with a pattern of
10, 20, 30, 45 for the handles array) but still freed in multiples of
EVENT_ALLOC_EXTENT; and the count changed to size_t.  Which means that
after 31 handles have been created, then 30 handles destroyed,
handlesAlloc is 5 while handlesCount is 1, and since (size_t)(1 - 5)
is indeed greater than 1, this then tried to free 10 elements, which
had the awful effect of nuking the handles array while there were
still live handles.

Nuking live handles puts libvirtd in an inconsistent state, and was
easily reproducible by starting and then stopping 60 faqemu guests.

* daemon/event.c (virEventCleanupTimeouts, virEventCleanupHandles):
Avoid integer wrap-around causing us to delete the entire array
while entries are still active.
* tests/eventtest.c (mymain): Expose the bug.
2011-01-27 09:12:36 -07:00
Cole Robinson
6cabc0b0d0 qemu: sound: Support intel 'ich6' model
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.

This is basically Dan's proposal of

    <sound model='ich6'>
        <codec type='output' slot='0'/>
        <codec type='duplex' slot='3'/>
    </sound>

without the codec bits implemented.

The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:

    - every <sound> device has a <codec type='default'/> (unless codecs are
        manually specified)
    - <codec type='none'/> is required to specify 'no codecs'
    - new audio settings like mic=on|off could then be exposed in
        <sound> or <codec> in a consistent manner for all sound models

v2:
    Use model='ich6'

v3:
    Use feature detection, from eblake
    Set codec id, bus, and cad values

v4:
    intel-hda isn't supported if -device isn't available

v5:
    Comment spelling fixes
2011-01-24 13:11:52 -05:00
Cole Robinson
1d9c0a08d9 qemu: Allow serving VNC over a unix domain socket
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:

<graphics type='vnc' socket='/foo/bar/baz'/>

This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').

Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.

v2:
    schema: Make listen vs. socket a <choice>
2011-01-21 16:03:04 -05:00
Eric Blake
1859939a74 qemu: use -incoming fd:n to avoid qemu holding fd indefinitely
https://bugzilla.redhat.com/show_bug.cgi?id=620363

When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete.  Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.

The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.

* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible.  Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
2011-01-17 09:24:41 -07:00
Jiri Denemark
e182ba872b tests: Add tests for per-device boot elements 2011-01-17 17:18:56 +01:00
Matthias Bolte
ed25dcc2c1 tests: Remove obsolete secaatest
Before the security driver was refactored in d6623003 seclabeltest and
secaatest were basically the same. seclabeltest was meant for SELinux
and secaatest for AppArmor. Both tests exited early when the specific
security driver backend wasn't enabled.

With the new security manager trying to initialize a disabled security
driver backend is an error that can't be distinguished from other errors
anymore. Therefore, the updated seclabeltest just asks for the first
available backend as this will always work even with SELinux and AppArmor
backend being disabled due to the new Nop backend.

Remove the obsolete secaatest and compile and run the seclabeltest
unconditional.

This fixes make check on systems that support AppArmor.
2011-01-15 23:36:31 +01:00
Eric Blake
30b9e608c6 qemu: move monitor device out of domain_conf common code
* src/conf/domain_conf.h (virDomainChrDeviceType): Drop monitor.
* src/conf/domain_conf.c (virDomainChrDevice)
(virDomainChrDefParseTargetXML, virDomainChrDefFormat): Drop
monitor support.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Alter signature.
* src/qemu/qemu_monitor.h (qemuMonitorOpen): Likewise.
* src/qemu/qemu_domain.h (_qemuDomainObjPrivate): Change type of
monConfig.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateFree)
(qemuDomainObjPrivateXMLFormat, qemuDomainObjPrivateXMLParse):
Adjust to type change.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuPrepareMonitorChr)
(qemudStartVMDaemon, qemuDomainXMLToNative, qemuConnectMonitor)
(qemudShutdownVMDaemon): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpen): Likewise.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Likewise.
2011-01-14 09:54:26 -07:00
Eric Blake
98334e7c3a domain_conf: split source data out from ChrDef
This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.
2011-01-14 09:54:26 -07:00