Introduce two utility functions to parse a kernel command
line string according to the kernel code parsing rules in
order to enable the caller to perform operations such as
verifying whether certain argument=value combinations are
present or retrieving an argument's value.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This was mostly boilerplate conversion, but in one case I needed to
define several differently named char* to take the place of a single
char *tmp that was re-used multiple times, and in another place there
was a single char* that was used at the toplevel of the function, and
then later used repeatedly inside a for loop, so I defined a new
separate char* inside the loop.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have support for IPv6 in the iptables helpers, and a new
option in the XML schema, we can wire up support for it in the network
driver.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.
This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute
<forward mode="nat">
<nat ipv6="yes"/>
</forward>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
IPv6 does support masquerade since Linux 3.9.0 / ip6tables 1.4.18,
which is Fedora 18 / RHEL-7 vintage, which covers all our supported
Linux versions.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v6.4.0-rc1~143 I've introduced a check that is supposed to
return from the function early, if given path is not a dm target.
While the idea is still valid, the implementation had a flaw.
It calls stat() over given path and the uses major(sb.st_dev) to
learn the major of the device. This is then passed to
dm_is_dm_major() which returns true or false depending whether
the device is under devmapper's control or not.
The problem with this approach is in how the major of the device
is obtained - paths managed by devmapper are special files and
thus we want to be using st_rdev instead of st_dev to obtain the
major number. Well, that's what virIsDevMapperDevice() does
already so might as well us that.
Fixes: 01626c668e
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839992
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When introducing virdevmapper.c (in v4.3.0-rc1~427) I didn't
realize there is a function that calls in devmapper. The function
is called virIsDevMapperDevice() and lives in virutil.c. Now that
we have a special file for handling devmapper move it there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
If one of the early checks to get screen resolution fails 'screenData'
would be passed to VIR_FREE uninitialized. Unfortunately the compiler
isn't able to detect this when VIR_FREE is implemented using
g_clear_pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
'uri_out' may be passed to VIR_FREE uninitialized if 'conn' is NULL.
Unfortunately the compiler isn't able to detect this problem when
VIR_FREE is implemented using g_clear_pointer. Initialize the variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For the case where -fw_cfg uses a file, we need to set the
seclabels on it to allow QEMU the access. While QEMU allows
writing into the file (if specified on the command line), so far
we are enabling reading only and thus we can use read only label
(in case of SELinux).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are recommendations and limitations to the name of the
config blobs we need to follow [1].
We don't want users to change any value only add new blobs. This
means, that the name must have "opt/" prefix and at the same time
must not begin with "opt/ovmf" nor "opt/org.qemu" as these are
reserved for OVMF or QEMU respectively.
1: docs/specs/fw_cfg.txt from qemu.git
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Setting OEM strings for a domain was introduced in
v4.1.0-rc1~315. However, any application that wanted to use them
(e.g. to point to an URL where a config file is stored) had to
'dmidecode -u --oem-string N' (where N is index of the string).
Well, we can expose them under our <sysinfo/> XML and if the
domain is running Libvirt inside it can be obtained using
virConnectGetSysinfo() API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since nobody sets custom dmidecode path anymore, we can drop all
code that exists only because of that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with custom dmidecode scripts is that they are hard to
modify, especially if we will want them to act differently based
on passed arguments. So far, we have two scripts which do no more
than 'cat $sysinfo' where $sysinfo is saved dmidecode output.
The virCommandSetDryRun() can be used to trick
virSysinfoReadDMI() thinking it executed real dmidecode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to decode DMI table, just before constructing
virCommand() the decoder is looked for in PATH using
virFindFileInPath(). Well, this is not necessary because
virCommandRun() will do this too (in virExec()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Virtually every variable defined in the function can be freed
automatically when going out of scope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Before QEMU introduced migratable CPU property, "-cpu host" included all
features that could be enabled on the host, even those which would block
migration. In other words, the default was equivalent to migratable=off.
When the migratable property was introduced, the default changed to
migratable=on. Let's record the default in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The attribute is only allowed for host-passthrough CPUs and it can be
used to request only migratable or all supported features to be enabled
in the virtual CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to set ctxt->node outside of the function. The
function can set it itself - it has all the info needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I think that since <qemu:commandline/> is kind of a hack, it
doesn't deserve place in the front row.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virStateInitialize() function has ATTRIBUTE_NONNULL()
referring to @root argument (incorrectly anyway) but in
daemonRunStateInit() NULL is passed in anyway.
Then there is virCommandAddArgPair() which also has
ATTRIBUTE_NONNULL() for one of its arguments and then checks the
argument for being NULL anyways.
Signed-off-by:Bihong Yu <yubihong@huawei.com>
Reviewed-by:Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit b50a8354f6 added call to qemuDomainDiskBlockJobIsSupported prior
to filling the 'disk' variable resulting in a crash when attempting a
block commit.
https://gitlab.com/libvirt/libvirt/-/issues/31
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Juan Quintela noticed that when he restarted libvirt he was getting
extra iptables rules added by libvirt even though he didn't have any
libvirt networks that used iptables rules. It turns out this also
happens if the firewalld service is restarted. The extra rules are
just the private chains, and they're sometimes being added
unnecessarily because they are added separately in a global
networkPreReloadFirewallRules() that does the init if there are any
active networks, regardless of whether or not any of those networks
will actually add rules to the host firewall.
The fix is to change the check for "any active networks" to instead
check for "any active networks that add firewall rules".
(NB: although the timing seems suspicious, this isn't a new regression
caused by the recently pushed f5418b427 (which forces recreation of
private chains when firewalld is restarted); it was an existing bug
since iptables rules were first put into private chains, even after
commit c6cbe18771 delayed creation of the private chains. The
implication is that any downstream based on v5.1.0 or later that cares
about these extraneous (but harmless) private chains would want to
backport this patch (along with the other two if they aren't already
there))
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If virDomainUpdateDeviceFlags() was used to update an <interface>, and
the interface type changed from type='network' where the network was
an unmanaged bridge (so actualType == bridge) to type='bridge'
(i.e. actualType *also* == bridge), the update would fail due to the
perceived change in type.
In practice it is okay to switch between any interface types that end
up using a tap device, since libvirt just needs to attach the device
to a new bridge. But in this case we were erroneously rejecting it due
to a conditional that was too restrictive. This is what the code was doing:
if (old->type != new->type)
[allow update]
else
if ((oldActual == bridge and newActual == network)
|| (oldActual == network and newActual == bridge)) {
[allow update]
else
[error]
In the case described above though, old->type and new->type don't match,
but oldActual and newActual are both 'bridge', so we get an error.
This patch changes the inner conditional so that any combination of
'network' and 'bridge' for oldActual and newActual, since they both
use a tap device connected to a bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous fix accidentally picked up a debug change that put
alignment back at 4, not 8, bytes as it claimed:
commit 37ae042642
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 3 11:18:23 2020 +0100
conf: force 8 byte alignment for virObjectEvent
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to be able to cast from virObjectEventPtr to one of
its many subclasses. Some of these subclasses have 8 byte
alignment on 32-bit platforms, but virObjectEventPtr only
has 4 byte alignment.
Previously the virObject base class had 8 byte alignment
but this dropped to 4 byte when converted to inherit from
GObject. This introduces cast alignment warnings on 32-bit:
../../src/conf/domain_event.c: In function 'virDomainEventDispatchDefaultFunc':
../../src/conf/domain_event.c:1656:30: error: cast increases required alignment of target type [-Werror=cast-align]
1656 | rtcChangeEvent = (virDomainEventRTCChangePtr)event;
| ^
../../src/conf/domain_event.c:1785:34: error: cast increases required alignment of target type [-Werror=cast-align]
1785 | balloonChangeEvent = (virDomainEventBalloonChangePtr)event;
| ^
../../src/conf/domain_event.c:1896:35: error: cast increases required alignment of target type [-Werror=cast-align]
1896 | blockThresholdEvent = (virDomainEventBlockThresholdPtr)event;
| ^
../../src/conf/domain_event.c: In function 'virDomainQemuMonitorEventDispatchFunc':
../../src/conf/domain_event.c:1974:24: error: cast increases required alignment of target type [-Werror=cast-align]
1974 | qemuMonitorEvent = (virDomainQemuMonitorEventPtr)event;
| ^
../../src/conf/domain_event.c: In function 'virDomainQemuMonitorEventFilter':
../../src/conf/domain_event.c:2179:20: error: cast increases required alignment of target type [-Werror=cast-align]
2179 | monitorEvent = (virDomainQemuMonitorEventPtr) event;
| ^
Forcing 8-byte alignment on virObjectEventPtr removes the
alignment increase during casts to subclasses.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts b897973f2e
Even though it may have been the case in the past, relative
XPaths don't overwrite the ctxt->node. Thus, there's no need to
save it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to commits 55ce656463 and 6c17606b7c in the qemu driver, make
separate copies of persistent and live device config and normalize the MAC
address between the two. This avoids having different MAC address for the
persistent and live config, ensuring the device has the same address when
the persistent config takes affect after a VM restart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Laine Stump <laine@redhat.com>
To avoid bugs with mixing of g_object_(ref|unref) vs
virObject(Ref|Unref), we want every virObject to be
a GObject.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Memory allocated using g_object_new must never be released using
VIR_FREE/g_free because g_object_new uses a special allocation
strategy internally.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ref count will be private to the GObject base class
and we must not peek at it, even for debugging messages.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GObject has an arbitrary limit on the object struct size of 0xffff
bytes. It is expected that any large fields be separately allocated.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To prepare for a conversion to GObject, we need virObjectUnref
to have the same API design as g_object_unref, which means it
needs to be void.
A few places do actually care about the return value though,
and in these cases a thread local flag is used to determine
if the dispose method was invoked.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some, but not all, of the monitor event handlers check
the virObjectUnref return value to see if the domain
was disposed.
It should not be possible for this to happen, since
the function already holds a lock on the domain and
has only just acquired an extra reference on the
domain a few lines earlier.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Upon migration with disks, libvirt determines if each disk exists
on the destination and tries to pre-create missing ones. Well,
NVMe disks can't be pre-created, but they can be checked for
presence.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1823639
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to the context, here we are checking net->downscript's validity,
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If built without attr support removing any image will trigger
qemuBlockRemoveImageMetadata (the one that emits the warning)
-> qemuSecurityMoveImageMetadata
-> virSecurityManagerMoveImageMetadata
-> virSecurityDACMoveImageMetadata
-> virSecurityDACMoveImageMetadataHelper
-> virProcessRunInFork (spawns subprocess)
-> virSecurityMoveRememberedLabel
In there due to !HAVE_LIBATTR virFileGetXAttrQuiet will return
ENOSYS and from there the chain will error out.
That is wrong and looks like:
libvirtd[6320]: internal error: child reported (status=125):
libvirtd[6320]: Unable to remove disk metadata on vm testguest from
/var/lib/uvtool/libvirt/images/testguest.qcow (disk target vda)
This change makes virSecurityDACMoveImageMetadataHelper and
virSecuritySELinuxMoveImageMetadataHelper accept that
error code gracefully and in that sense it is an extension of:
5214b2f1a3 "security: Don't skip label restore on file systems lacking XATTRs"
which does the same for other call chains into the virFile*XAttr functions.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support downscript for booting vm,
and hotunplug interface device.
Signed-off-by: Chen Hanxiao <chen_han_xiao@126.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The stepping range (10-11) is likely incomplete. QEMU uses 10 and the
CPUID data for Cooperlake show 11. We will update the range if needed
once more details about he CPU are available.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit v3.10.0-182-g237f045d9a ("qemu: Ignore fallback CPU attribute
on reconnect") forced CPU 'fallback' to ALLOW, regardless of user
choice. This fixed a situation in which guests created with older
Libvirt versions, which used CPU mode 'host-model' in runtime, would
fail to launch in a newer Libvirt if the fallback was set to FORBID.
This would lead to a scenario where the CPU was translated to 'host-model'
to 'custom', but then the FORBID setting would make the translation
process fail.
PSeries can operate with 'host-model' in runtime due to specific PPC64
mechanics regarding compatibility mode. The update() implementation of
the cpuDriverPPC64 driver is a NO-OP if CPU mode is 'host-model', and
the driver does not implement translate(). The commit mentioned above
is causing PSeries guests to get their 'fallback' setting to ALLOW,
overwriting user choice, exposing a design problem in
qemuProcessRefreshCPU() - for PSeries guests, handling 'host-model'
as it is being done does not apply.
All other cpuArchDrivers implements update() and changes guest mode
to VIR_CPU_MODE_CUSTOM, meaning that PSeries is currently the only
exception to this logic. Let's make it official.
https://bugzilla.redhat.com/show_bug.cgi?id=1660711
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200525123945.4049591-2-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The host CPU related info stored in the capabilities cache is no longer
valid after the host CPU changes. This is not a frequent situation in
real world, but it can easily happen in nested scenarios when a disk
image is started with various CPUs.
https://bugzilla.redhat.com/show_bug.cgi?id=1778819
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The purpose of this function is to give a short description that would
be change when a host CPU is replaced with a different model. This is
currently implemented by reading /proc/cpuinfo.
It should be implemented for all architectures for which the QEMU driver
stores host CPU data in the capabilities cache. In other words for archs
that support host-model CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic cleanup on qemuProcessUpdateCPU and the functions called
by it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200522195620.3843442-5-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The intention of these split Load*Entry functions is to prevent
virQEMUDriverConfigLoadFile from getting too large.
There's no need to signal to the caller whether an entry was found
or not, only whether there was an error.
Remove the non-standard return 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virConfGetValueString returns an allocated string that needs to be
freed.
Fixes: 34a59fb570
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuxml2argv test suite is way more comprehensive than the hotplug
suite. Since we share the code paths for monitor and command line
hotplug we can easily test the properties of devices against the QAPI
schema.
To achieve this we'll need to skip the JSON->commandline conversion for
the test run so that we can analyze the pure properties. This patch adds
flags for the comand line generator and hook them into the
JSON->commandline convertor for -netdev. An upcoming patch will make use
of this new infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all code paths generate JSON props we can remove the conversion
to command line arguments and back in the monitor code.
Note that the test which is removed in this commit will be replaced by a
stronger testsuite later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Syntax of guestfwd channel also needs to be modified to conform to the
QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QEMU models guestfwd as:
'guestfwd': [
{ "str": "tcp:10.0.2.1:4600-chardev:charchannel0" },
{ "str": "...."},
]
but the command line as:
guestfwd=tcp:10.0.2.1:4600-chardev:charchannel0,guestfwd=...
I guess the original idea was to make it extensible while not worrying
about adding another object for it. Either way it requires us to add yet
another JSON->cmdline convertor for arrays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'netdev_add' command was recently formally described in qemu via the
QMP schema. This means that it also requires the arguments to be
properly formatted. Our current approach is to generate the command line
and then use qemuMonitorJSONKeywordStringToJSON to get the JSON
properties for the monitor. This will not work if we need to pass some
fields as numbers or booleans.
In this step we re-do internals of qemuBuildHostNetStr to format a JSON
object which is converted back via virQEMUBuildNetdevCommandlineFromJSON
to the equivalent command line. This will later allow fixing of the
monitor code to use the JSON object directly rather than rely on the
conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In preparation for converting the generator of -netdev to generate JSON
which will be used to do the command line rather than the other way
around we need to introduce a convertor which properly configures
virQEMUBuildCommandLineJSON for the quirks of -netdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use automatic pointer cleanup for virJSONValuePtrs to get rid of the
cleanup label and ret variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a variant similar to virJSONValueObjectAppendString which also
formats more complex value strings with printf syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The helper returns a list of arguments of a virCommand. This will be
useful in tests where we'll inspect certain already formatted arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In some cases we use 'on/off' for command line arguments. Add a switch
which will select the preferred spelling for a specific usage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow reusing this for formatting of netdev_add arguments into -netdev.
We need to be able to skip the 'type' property as it's used without the
prefix by our generator.
Add infrastructure which allows skipping property with a specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In qemu the argument of 'ipv6-net' is split up into 'ipv6-prefix' and
'ipv6-prefixlen'. Additionally now that 'netdev_add' was qapified, only
the real properties are allowed. Switch to using them explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The output of the function is fed as argument to '-device' command line
argument or 'device_add' monitor command except for 'guestfwd' channels
where it needs to be fed to -netdev/netdev_add. This is confusing and
error prone. Split it up since the caller needs to know which
command/option to use anyways, so the caller can call the appropriate
function without any magic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Both active branches create the same backend chardev. Since there is no
other case, extract it before the switch so that we don't have to
duplicate it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'tftp' storage protocol was supported by qemu until 2.7.0. Add an
interlock when blockdev is used and drop the test case for it as it's
IMO not worth adding another test file just for that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The qemu.conf change broke our augeas test:
qemu/test_libvirtd_qemu.aug:96.3-203.1:exception thrown in test
qemu/test_libvirtd_qemu.aug:96.8-.34:exception: Iterated lens matched less than it should
Lens: ../../src/qemu/libvirtd_qemu.aug:170.13-.43:
Last match: ../../src/qemu/libvirtd_qemu.aug:18.52-.113:
Not matching: ../../src/qemu/libvirtd_qemu.aug:12.19-.31:
Error encountered at 48:27 (1615 characters into string)
<\n "/dev/ptmx", "/dev/kvm"|=|,\n]\nsave_image_format = "raw>
Fixes: ab5ba57012
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The RTC and HPET modes for the QEMU emulation tick have been dropped
almost 9 years ago, in commit 25f3151ece1d5881826232bebccc21b588d4e03e.
Do not allow them in the devices cgroup policy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although the original patches to support controllers with
hotplug='off' were checking during hotplug/attach requests that the
device was being plugged into a PCI controller that didn't have
hotplug disabled, but I forgot to do the same for device detach (the
main impetus for adding the feature was to prevent unplugs originating
from within the guest, so it slipped my mind). So although the guest
OS was ultimately unable to honor the unplug request, libvirt could
still be used to make such a request, and since device attach/detach
are asynchronous operations, the caller to libvirt would receive a
success status back (the device would stubbornly/correctly remain in
the domain status XML however)
This patch remedies that, by looking at the controller for the device
in the detach request, and immediately failing the operation if that
controller has hotplug=off.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the mirror destination is not a file but a NVMe disk, then
call qemuHostdevReAttachOneNVMeDisk() to reattach the NVMe back
to the host.
This would be done by blockjob code when the job finishes, but in
this case the job won't finish - QEMU is killed meanwhile.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1825785
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In v5.10.0-rc1~42 (which was later fixed in v6.0.0-rc1~487) I am
removing XATTRs for a file that QEMU is mirroring a disk into but
it is killed meanwhile. Well, we can call
qemuSecurityRestoreImageLabel() which will not only remove XATTRs
but also use them to restore the original owner of the file.
This would be done by blockjob code when the job finishes, but in
this case the job won't finish - QEMU is killed meanwhile
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use g_new0 to allocate and remove NULL checks from callers
and the lock will release properly
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous commit we started tracking whether QEMU supports
'-numa mem='. This is tied to the machine type because migration
from '-numa mem=' to '-numa memdev' is impossible (or vice
versa). But since it's tied to a machine type (where migration
from one to another is also unsupported) we can allow QEMU to get
rid of the deprecated command line.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1783355
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building -numa command line there is a for() loop that
builds '-numa memdev=' for each guest NUMA node. And also
records in a local variable whether any of memory-object-*
backends must be used to satisfy desired config. Well, instead of
checking in each iteration whether corresponding capabilities are
set, we can do swap if() and for() and check only once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The AppArmor secdriver does not use labels to grant access to
resources. Therefore, it doesn't use XATTRs and hence it lacks
implementation of .domainMoveImageMetadata callback. This leads
to a harmless but needless error message appearing in the logs:
virSecurityManagerMoveImageMetadata:476 : this function is not
supported by the connection driver: virSecurityManagerMoveImageMetadata
Closes: https://gitlab.com/libvirt/libvirt/-/issues/25
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The documented enum and its values do not exits. The real enum has
slightly different name.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce vendors and some commonly used models
for ARM arch, these will be used for virConnectionGetCapabilities
for ARM CPUs.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB3113973DDB36C7A5E18F451299BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce getHost support for ARM CPU driver,
read CPU vendor_id, part_id and flags from
registers directly. These codes will only be
compiled on aarch64 hardware.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB311380AFE294266B4E87B85699BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add helper functions to parse vendor and model for
ARM CPUs, and use them as callbacks when load cpu
maps.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB3113C158B8C2822E75DB5EAE99BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce virCPUarmData to virCPUData and related
structs to cpu_arm.c for ARM cpus.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB31130D12A95144FF88C1E32499BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The structure is not specific to x86 and thus its cleanup function
should be defined in cpu.h and be available to all users.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
==179663== 35 (24 direct, 11 indirect) bytes in 1 blocks are definitely lost in loss record 205 of 461
==179663== at 0x4839EC6: calloc (vg_replace_malloc.c:762)
==179663== by 0x5791AC0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.1)
==179663== by 0x190C79: qemuDomainObjPrivateXMLParseBlockjobDataCommit (qemu_domain.c:3295)
==179663== by 0x190DF7: qemuDomainObjPrivateXMLParseBlockjobDataSpecific (qemu_domain.c:3331)
==179663== by 0x19157D: qemuDomainObjPrivateXMLParseBlockjobData (qemu_domain.c:3469)
==179663== by 0x1918E8: qemuDomainObjPrivateXMLParseBlockjobs (qemu_domain.c:3498)
==179663== by 0x193841: qemuDomainObjPrivateXMLParse (qemu_domain.c:3944)
==179663== by 0x4A1BA9D: virDomainObjParseXML (domain_conf.c:22306)
==179663== by 0x4A1BFE9: virDomainObjParseNode (domain_conf.c:22429)
==179663== by 0x4A1C0B4: virDomainObjParseFile (domain_conf.c:22443)
==179663== by 0x1431E1: testCompareStatusXMLToXMLFiles (qemuxml2xmltest.c:61)
==179663== by 0x177722: virTestRun (testutils.c:142)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
==156803== 58 (40 direct, 18 indirect) bytes in 1 blocks are definitely lost in loss record 306 of 463
==156803== at 0x4839EC6: calloc (vg_replace_malloc.c:762)
==156803== by 0x5791AC0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.1)
==156803== by 0x48F60DC: virAlloc (viralloc.c:48)
==156803== by 0x18DD74: qemuStorageSourcePrivateDataAssignSecinfo (qemu_domain.c:2384)
==156803== by 0x18DFD5: qemuStorageSourcePrivateDataParse (qemu_domain.c:2433)
==156803== by 0x49EC884: virDomainStorageSourceParse (domain_conf.c:9857)
==156803== by 0x49ECBA3: virDomainDiskBackingStoreParse (domain_conf.c:9909)
==156803== by 0x49F129D: virDomainDiskDefParseXML (domain_conf.c:10785)
==156803== by 0x4A1804E: virDomainDefParseXML (domain_conf.c:21543)
==156803== by 0x4A1B60C: virDomainObjParseXML (domain_conf.c:22254)
==156803== by 0x4A1BFE9: virDomainObjParseNode (domain_conf.c:22429)
==156803== by 0x4A1C0B4: virDomainObjParseFile (domain_conf.c:22443
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A failure in qemuProcessLaunch would lead to qemuExtDevicesStop
being called twice - once in the cleanup section and then again
in qemuProcessStop.
However, the first one is called while the QEMU process is
still running, which is too soon for the swtpm process, because
the swtmp_ioctl command can lock up:
https://bugzilla.redhat.com/show_bug.cgi?id=1822523
Remove the first call and only leave the one in qemuProcessStop,
which is called after the QEMU process is killed.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The @tmpIfname is a pointer into a const string. To avoid
mistakenly changing the const string via the pointer, make the
pointer const too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is not yet supported by virtiofsd.
Fixes#23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It was never used since commit 57b5e27d3d introduced it.
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Availability of the vmpvscsi controller model is gated by the pvscsi
capability.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability flags support for `-device pvscsi`, which provides the
VMware paravirtual SCSI controller.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'blockdev-mirror' requires the write permission internally to do the
copy. This means that we have to force the image to be read-write for
the duration of the copy and can fix it after the copy is done.
https://bugzilla.redhat.com/show_bug.cgi?id=1832204
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev or when reusing externally created images and thus
without the need for formatting the image we actually can support
snapshots of read-only disks. Arguably it's not very useful so they are
not done by default but users of libvirt such as oVirt are actually
using this.
https://bugzilla.redhat.com/show_bug.cgi?id=1832204
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need qemu to be able to write the newly created images so that it can
format them to the specified storage format.
Force write access by relabelling the images when formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'Create' API of the two storage file backends is used only on
code-paths where we need to format the image after creating an empty
file. Since the DAC security driver only modifies the owner of the file
and not the mode we need to create all files which are going to be
formatted with the write bit set for the user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Any non-raw block layer feature will not work with raw SCSI command
passthrough via 'scsi-block'. Explicitly refuse use of luks encryption,
storage slices and copy on read.
https://bugzilla.redhat.com/show_bug.cgi?id=1820040
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.
This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.
We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.
This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.
Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.
https://bugzilla.redhat.com/show_bug.cgi?id=1829550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the 'scsi' passthrough feature of virtio-blk-pci
was enabled by default. Libvirt was disabling it due to security
implications outlined in libvirt commit v0.9.9-4-g177db08775 if it was
not explicitly requested. In qemu commit v2.4.0-1566-ged65fd1a27 the
default value was changed to disabled in preparation for virtio-1.
Starting from QEMU-5.0 the 'scsi' property was also deprecated. There
replacement for the functionality is to use 'virtio-scsi' for the
purpose. This isn't a direct replacement though.
Add capability named QEMU_CAPS_VIRTIO_BLK_SCSI_DEFAULT_DISABLED which
allows us to stop formatting the 'scsi=' property if it's disabled by
default and not requested so that we don't use deprecated features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU-5.0 added 'default-value' field for any applicable property
returned by 'device-list-properties'. Add an optional callback for any
device property definition which will allow detection of features and
default values based on this new data.
This unfortunately means that the description of properties had to move
from the slightly-too-generic 'struct virQEMUCapsStringFlags' to a new
type (virQEMUCapsDevicePropsFlags) which also has the callback property
and the corresponding change in the initializers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Create a hash table of device property names which also stores the
corresponding JSON object so that the detection code can look at the
recently added 'default-value' field and possibly others.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic cleanup of variables and current style of header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virQEMUCapsProbeQMPGenericProps is used only in one place now. Move the
code directly to virQEMUCapsProbeQMPObjectTypes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reimplement device property detection directly rather than using
virQEMUCapsProbeQMPGenericProps in preparation for changes to the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was parsing 'qom-list-types' and then also calling function
which parses 'device-list-properties' and also 'qom-list-properties'.
Split it up into individual functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Help QEMU in deprecation of -drive if=none without the need to refactor
all old boards. Stop masking out -blockdev support when -drive if=sd
needs to be used. We achieve this by forbidding blockjobs and
special-casing all other code paths. Blockjobs are sacrificed in this
case as SD cards are a corner case for some ARM boards and are thus not
used commonly.
https://bugzilla.redhat.com/show_bug.cgi?id=1821692
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SD cards need to be instantiated via -drive if=sd. This means that all
cases where we use the blockdev path need to be special-cased for SD
cards.
Note that at this point QEMU_CAPS_BLOCKDEV is still cleared if the VM
config has a SD card.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the drive alias for all cases when we can't generate qomName. This
is meant to handle disks on 'sd' bus which are instantiated via -drive
if=sd as there isn't any specific QOM name for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We still have to use -drive to instantiate sd disks. Combining that with
the new logic for blockjobs would be very complicated and not worth it
given that 'sd' cards work only on few rarely used machine types of
non-common architectures and libvirt didn't implement support for 'sd'
bus controllers. This will allow us to use -blockdev for other kinds on
such machines while sacrificing block jobs.
Note: this is currently no-op as we mask-out the QEMU_CAPS_BLOCKDEV
capability if any of the disks has bus='sd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.
Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that we don't try to reload node names with -blockdev. If
something doesn't have a node name the update will not make the
situation better.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are no users for the qemu-specific enum values. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no point using the qemu-specific disk bus names in the error
message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all the universal code since the 'else' part formats commandline
only for the SD card based disk. Note that we can use virDiskNameToIndex
without the check as we already validate that 'disk->dst' contains a
properly formatted string in the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For 'SD' disks and floppies in the pre-blockdev era we don't format
-device. Extract the logic so that it's more clear and add comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function effectively boils down to whether the disk is 'SD'. Since
we'll need to make more decisions based on the fact whether the disk is
on the SD bus, rename the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the function and passing of 'def' through the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Agregate validation of frontend properties in a new function called
qemuValidateDomainDeviceDefDiskFrontend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When firewalld is stopped, it removes *all* iptables rules and chains,
including those added by libvirt. Since restarting firewalld means
stopping and then starting it, any time it is restarted, libvirt needs
to recreate all the private iptables chains it uses, along with all
the rules it adds.
We already have code in place to call networkReloadFirewallRules() any
time we're notified of a firewalld start, and
networkReloadFirewallRules() will call
networkPreReloadFirewallRules(), which calls
networkSetupPrivateChains(); unfortunately that last call is called
using virOnce(), meaning that it will only be called the first time
through networkPreReloadFirewallRules() after libvirtd starts - so of
course when firewalld is later restarted, the call to
networkSetupPrivateChains() is skipped.
The neat and tidy way to fix this would be if there was a standard way
to reset a pthread_once_t object so that the next time virOnce was
called, it would think the function hadn't been called, and call it
again. Unfortunately, there isn't any official way of doing that (we
*could* just fill it with 0 and hope for the best, but that doesn't
seem very safe.
So instead, this patch just adds a static variable called
chainInitDone, which is set to true after networkSetupPrivateChains()
is called for the first time, and then during calls to
networkPreReloadFirewallRules(), if chainInitDone is set, we call
networkSetupPrivateChains() directly instead of via virOnce().
It may seem unsafe to directly call a function that is meant to be
called only once, but I think in this case we're safe - there's
nothing in the function that is inherently "once only" - it doesn't
initialize anything that can't safely be re-initialized (as long as
two threads don't try to do it at the same time), and it only happens
when responding to a dbus message that firewalld has been started (and
I don't think it's possible for us to be processing two of those at
once), and even then only if the initial call to the function has
already been completed (so we're safe if we receive a firewalld
restart call at a time when we haven't yet called it, or even if
another thread is already in the process of executing it. The only
problematic bit I can think of is if another thread is in the process
of adding an iptable rule at the time we're executing this function,
but 1) none of those threads will be trying to add chains, and 2) if
there was a concurrency problem with other threads adding iptables
rules while firewalld was being restarted, it would still be a problem
even without this change.
This is yet another patch that fixes an occurrence of this error:
COMMAND_FAILED: '/usr/sbin/iptables -w10 -w --table filter --insert LIBVIRT_INP --in-interface virbr0 --protocol tcp --destination-port 67 --jump ACCEPT' failed: iptables: No chain/target/match by that name.
In particular, this resolves: https://bugzilla.redhat.com/1813830
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
networkSetupPrivateChains() is currently called only once per run of
libvirtd, so it can assume that errInitV4 and errInitV6 are empty/null
when it is called. In preparation for potentially calling this
function multiple times during one run, this patch moves the reset of
errInitV[46] to the top of the function, to assure no memory is
leaked.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As suggested in the linked bug, libvirt should firstly check
whether the major number of the device is device mapper major.
Because if it isn't subsequent DM_DEVICE_DEPS task may not only
fail, but also yield different results. In the bugzilla this is
demonstrated by creating a devmapper target named 'loop0' and
then creating loop target /dev/loop0. When the latter is then
passed to a domain, our virDevMapperGetTargetsImpl() function
blindly asks devmapper to provide target dependencies for
/dev/loop0 and because of the way devmapper APIs work, it will
'sanitize' the input by using the last component only which is
'loop0' and thus return different results than expected.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1823976
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a framework to register cleanup callbacks that are run
when a domain is shut down. The idea is to run callbacks in
reverse order than they were registered. However, looking at the
code this is not the case. Fortunately, this framework is used to
register a single callback and a single callback only -
qemuMigrationDstPrepareCleanup() - therefore there was no problem
just yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.
Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: Artur Puzio <contact@puzio.waw.pl>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We never supported host-model CPUs on ARM and we don't want to support
them even once patches for direct detection of host CPU are merged. And
since using host CPU definition for host-model CPUs exists only for
backward compatibility, we should not use it for any host-model support
added in the future. Such enhancement should exclusively use the result
of query-cpu-model-expansion. Until proper host-model support is
implemented for ARM (if ever), we need to make sure the detected host
CPU is not accidentally used for host-model CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When a system has enabled the iptables/ip6tables services rather than
firewalld, there is no explicit ordering of the start of those
services vs. libvirtd. This creates a problem when libvirtd.service is
started before ip[6]tables, as the latter, when it finally is started,
will remove all of the iptables rules that had previously been added
by libvirt, including the custom chains where libvirt's rules are
kept. This results in an error message similar to the following when a
user subsequently tries to start a new libvirt network:
"Error while activating network: Call to virNetworkCreate failed:
internal error: Failed to apply firewall rules
/usr/sbin/ip6tables -w --table filter --insert LIBVIRT_FWO \
--in-interface virbr2 --jump REJECT:
ip6tables: No chain/target/match by that name."
(Prior to logging this error, it also would have caused failure to
forward (or block) traffic in some cases, e.g. for guests on a NATed
network, since libvirt's rules to forward/block had all been deleted
and libvirt didn't know about it, so it couldn't fix the problem)
When this happens, the problem can be remedied by simply restarting
libvirtd.service (which has the side-effect of reloading all
libvirt-generated firewall rules)
Instead, we can just explicitly stating in the libvirtd.service file
that libvirtd.service should start after ip6tables.service and
ip6tables.service, eliminating the race condition that leads to the
error.
There is also nothing (that I can see) in the systemd .service files
to guarantee that firewalld.service will be started (if enabled) prior
to libvirtd.service. The same error scenario given above would occur
if libvirtd.service started before firewalld.service. Even before
that, though libvirtd would have detected that firewalld.service was
disabled, and then turn off all firewalld support. So, for example,
firewalld's libvirt zone wouldn't be used, and most likely traffic
from guests would therefore be blocked (all with no external
indication of the source of the problem other than a debug-level log
when libvirtd was started saying that firewalld wasn't in use); also
libvirtd wouldn't notice when firewalld reloaded its rules (which also
simultaneously deletes all of libvirt's rules).
I'm not aware of any reports that have been traced back to
libvirtd.service starting before firewalld.service, but have seen that
error reported multiple times, and also don't see an existing
dependency that would guarantee firewalld.service starts before
libvirtd.service, so it's possible it's been happening and we just
haven't gotten to the bottom of it.
This patch adds an After= line to the libvirtd.service file for each
of iptables.service, ip6tables.service, and firewalld.servicee, which
should guarantee that libvirtd.service isn't started until systemd has
started whichever of the others is enabled.
This race was diagnosed, and patch proposed, by Jason Montleon in
https://bugzilla.redhat.com/1723698 . At the time (April 2019) danpb
agreed with him that this change to libvirtd.service was a reasonable
thing to do, but I guess everyone thought someone else was going to
post a patch, so in the end nobody did.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The libxl driver has suffered an identity crisis since its introduction.
It took on the name 'libxl' since at the time libvirt already contained
a 'xen' driver for the old Xen toolstack implementation. 'libxl' is short
for libxenlight, which is often called xenlight. Unfortunately all forms
of the name are used in the libxl driver.
The only remaining use of the 'xenlight' form is when interacting with
the host device manager, which is difficult to change since it would
cause problems when upgrading the driver.
Rename the #define to make it clear the 'xenlight' form is internal and
add a comment describing why the name exists and that its use should be
discouraged.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver declares its name as 'Xen' through the public
virConnectGetType() API. In the virHypervisorDriver table the name is
set to 'xenlight'. To add more confusion, the name is set to 'LIBXL'
in the virStateDriver. For consistency, use the same name in the driver
tables as reported in the public virConnectGetType() API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virConnectGetType() returns "Xen" for libxl, not "LIBXL".
This prevents users opening a connection to the libxl driver when using
the modular daemons.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In a few places we use 0 and false, or 1 and true interchangeably
even though the variable or return type in question is boolean.
Fix those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where a return variable is introduced (ret
or retval), but then is never changed and is then passed to
return. Well, we can return the value that the variable is
initialized to directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few functions that currently return an integer but in
fact they always return the same integer (zero). Make them void.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since it's introduction in v0.9.7-147-gf4324e3292 the
virNetServerClientInitKeepAlive() function returned nothing than
a negative one. Fortunately, this did not pose any problem
because we ignored the retval happily. Well, it's time to check
for the retval because the function might fail regularly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In the past we added 1024 bytes of padding to saved state images so that
users can run "virsh managedsave-edit $GUEST" and make XML changes which
increase the size of the XML document. This padding was accidentally
lost a while back
commit 6b9b21db70
Author: Peter Krempa <pkrempa@redhat.com>
Date: Wed Feb 17 13:10:11 2016 +0100
qemu: Remove unnecessary calculations in qemuDomainSaveMemory
The original 1024 bytes was unreasonably stingy when we consider that
the QEMU state is typically going to be many 100's of MB in size. Thus
this adds 64 KB of padding after the XML which should cope with any
plausible modifications a user will want to make.
https://bugzilla.redhat.com/show_bug.cgi?id=1229255
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Only probe QEMU binary with accel=tcg if TCG is not disabled.
Similarly, only add a VIR_DOMAIN_VIRT_QEMU guest if TCG
is available.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemuBuildVirtioOptionsStr can not fail anymore, remove its
return value and make it void.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move capability validation of virtio options from command line
generation to post-parse device validation where it belongs.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IBS (Indirect Branch Speculation) is the last capability added
in QEMU 2.12 related to Spectre mitigation for Power. It was
added in commit 4be8d4e7d935.
This patch introduces it as QEMU_CAPS_MACHINE_PSERIES_CAP_IBS.
Like CFPC and SBBC, users might want to tune in IBS based on
their HW and guest OS requirements, and it's better to do it
so in a proper Libvirt feature than to put QEMU arguments
in the middle of the domain XML.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SBBC (Speculation Barrier Bounds Checking) is another capability
related to Spectre mitigation efforts in Power processors. It
was implemented in QEMU 2.12 by commit 09114fd81799.
This patch introduces it as QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC to
be implemented in the next patch. Like the case with the now
implemented CFPC, exposing this feature in the XML allows for
a cleaner way for users to tune the SBBC accordingly, given
that not all hypervisor and guest setups supports this
Spectre mitigation.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CFPC (Cache Flush on Privilege Change) is one of the capabilities
added to QEMU to mitigate Spectre vulnerabilities in Power chips.
It was implemented in QEMU 2.12 by commit 6898aed77f46.
This capability is still used today due to differences in how
the host setup (hardware and firmware/kernel) can handle this
mitigation. Its default value also varies with the pseries machine
version of the time. There's also certain OSes, like AIX, that
might not support the default value of the pseries machine the
guest uses.
Exposing this in the Libvirt XML as a feature will allow users to tune
CFPC values in a cleaner way, instead of hacking parameters in
<qemu:commandline> elements.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The implementation was never finished in libvirt. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature was never completed and is not really being pursued. Remove
the storage driver integration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit fix a wrong variable initialization. There is a variable
called `new_lease` which is being initialized with the content of
parameter `lease`. To avoid memory leak, the proper way is initialize
with NULL first. This wrong statement was added by commit 97a0aa24.
There are some other improvements also.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation wasn't quite able to parse everything that qemu does.
This patch rewrites the parser to a code that semantically resembles the
combination of 'nbd_parse_filename' and 'inet_parse' methods in qemu to
be able to parse the strings in an equivalent manner.
The only thing that libvirt doesn't do is to check the lengths of
various components in the nbd string in places where qemu uses constant
size buffers.
The test cases validate that some of the corner cases involving colons
are parsed properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1826652
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add io_uring value to capability replies.
The capability QEMU_CAPS_AIO_IO_URING will be used for io_uring aio mode,
introduced from QEMU 5.0, linux 5.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainSupportsCheckpointsBlockjobs checks if the
QEMU_CAPS_INCREMENTAL_BACKUP capability is supported to do the
interlocking. Capabilities are not present when the VM isn't running
though which would create false errors.
Move the checks after the liveness check in block job implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
If a backup job fails midway it's hard to figure out what happened as
it's running asynchronous. Use the VIR_DOMAIN_JOB_ERRMSG job statistics
field to pass through the error from the first failed backup-blockjob
so that both the consumer of the virDomainGetJobStats and the
corresponding event can see the error.
event 'job-completed' for domain backup-test:
operation: 9
time_elapsed: 46
disk_total: 104857600
disk_processed: 10158080
disk_remaining: 94699520
success: 0
errmsg: No space left on device
virsh domjobinfo backup-test --completed --anystats
Job type: Failed
Operation: Backup
Time elapsed: 46 ms
File processed: 9.688 MiB
File remaining: 90.312 MiB
File total: 100.000 MiB
Error message: No space left on device
https://bugzilla.redhat.com/show_bug.cgi?id=1812827
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The field can be used by jobs to add an optional error message to a
completed (failed) job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In order to add a string to qemuDomainJobInfo we must ensure that it's
freed and copied properly. Add helpers to copy and free the structure
and adjust the code to use them properly for the new semantics.
Additionally also allocation is changed to g_new0 as it includes the
type and thus it's very easy to grep for all the allocations of a given
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
String typed parameter values were introduced in v0.9.7-30-g40624d32fb.
virDomainGetJobStats was introduced in v1.0.2-239-g4dd00f4238 so all
clients already support typed parameter stings at that time thus we can
enable it unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function is mocked in qemuhotplugmock.so. Recent clang versions
decided to inline it so the mock stopped working resulting in
qemuhotplugtest wasting 15 seconds waiting for timeouts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Return error codes directly and fix weird reporting of errors via
temporary variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_AUTOCLOSE to declare it and remove all internal closing of the
filedescriptor. This will allow getting rid of 'error' completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an attempt to simplify qemuDomainSaveImageOpen we need to add
automatic pointer clearing for virQEMUSaveData.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 21ad56e932 introduced a regression where a VM with a corrupted
save image file would fail to start on the first attempt. This was
caused by returning a wrong return code as 'fd' was abused to also hold
the return code.
Since it's easy to miss this nuance, introduce a 'ret' variable for the
return code and return it' value in the error section.
https://bugzilla.redhat.com/show_bug.cgi?id=1791522
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
virCommand is now used everywhere.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Catch the individual usage not removed in previous commits.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Construct the command in multiple steps instead of using a sentinel
in the args array.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If an user is trying to configure a dhcp neetwork settings, it is not
possible to change the leasetime of a range or a host entry. This is
available using dnsmasq extra options, but they are associated with
dhcp-range or dhcp-hosts fields. This patch implements a leasetime for
range and hosts tags. They can be defined under that settings:
<dhcp>
<range ...>
<lease/>
</range>
<host ...>
<lease/>
</host>
</dhcp>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=913446
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a device is "move"-d (this basically means it was renamed),
we add the new device onto our list but keep the old there too.
Fortunately, udev sets this DEVPATH_OLD property which points to
the old device path. We can use it to remove the old instance.
To test this try renaming an interface, for instance:
# ip link set tunl0 name tunl1
# ip link set tunl1 name tunl0
One problem with udev is that it sends old ifname in INTERFACE
property, which creates a problem for us, the property is where
we get the ifname from and use it then to query all kind of info
about the interface. Well, if it is non-existent then we can't
query anything. This happens if ifname rename is suppressed
(net.ifnames=0 on kernel cmd line for instance). Fortunately, we
can use "kernel" source for udev events which has always the
fresh info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Move internals of udevRemoveOneDevice() into a separate function
which accepts sysfs path as an argument and actually removes the
device from the internal list. It will be reused later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When removing a node device object from the internal list the
udevRemoveOneDevice() function does plain unref over the object.
This is not sufficient. If there is another thread that's waiting
for the object lock it will wait forever.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDefParseXML function has grown so large it broke the build:
../../src/conf/domain_conf.c:20362:1: error: stack frame size of 4168 bytes
in function 'virDomainDefParseXML' [-Werror,-Wframe-larger-than=]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The file doesn't use virSystemd functions directly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
External devices are started before cgroup is created. Add the DBus
daemon to the VM cgroup with the rest of the external devices.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow calling qemuDBusStart() multiple times (as may be done by
qemu-slirp already).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The slirp helper process should be associated with the VM cgroup, like
other helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't stop the DBus daemon if a slirp helper failed to start, as it
may be shared with other helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for xl.cfg(5) 'passthrough' option in the domXML-to-xenconfig
configuration converter.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'passthrough' is Xen-Specific guest configuration option new to Xen 4.13
that enables IOMMU mappings for a guest and hence whether it supports PCI
passthrough. The default is disabled. See the xl.cfg(5) man page and
xen.git commit babde47a3fe for more details.
The default state of disabled prevents hotlugging PCI devices. However,
if the guest configuration contains a PCI passthrough device at time of
creation, libxl will automatically enable 'passthrough' and subsequent
hotplugging of PCI devices will also be possible. It is not possible to
unconditionally enable 'passthrough' since it would introduce a migration
incompatibility due to guest ABI change. Instead, introduce another Xen
hypervisor feature that can be used to enable guest PCI passthrough
<features>
<xen>
<passthrough state='on'/>
</xen>
</features>
To allow finer control over how IOMMU maps to guest P2M table, the
passthrough element also supports a 'mode' attribute with values
restricted to snyc_pt and share_pt, similar to xl.cfg(5) 'passthrough'
setting .
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.
<features>
<xen>
<e820_host state='on'/>
</xen>
</features>
e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The udev monitor thread "udevEventHandleThread()" will lag the
actual/real view of devices in sysfs as it serially processes udev
monitor events. So for instance if you were to run the following cmd
to create a new veth pair and rename one of the veth endpoints
you might see the following monitor events and real world that looks like
time
| create v0 sysfs entry
wake udevEventHandleThread | create v1 sysfs entry
udev_monitor_receive_device(v1-add) | move v0 sysfs to v2
udevHandleOneDevice(v1) |
udev_monitor_receive_device(v0-add) |
udevHandleOneDevice(v0) | <--- error msgs in virNetDevGetLinkInfo()
udev_monitor_receive_device(v2-move) | as v0 no longer exists
udevHandleOneDevice(v2) |
\/
As you can see the changes in sysfs can take place well before we get
to act on the events in the udevEventHandleThread(), so by the time we
get around to processing the v0 add event, the sysfs entry has been
moved to v2.
To work around this we check if the sysfs entry is valid before
attempting to read it and don't bother trying to read link info if
not. This is safe since we will never read sysfs entries earlier than
it existing, ie. if the entry is not there it has either been removed
in the time since we enumerated the device or something bigger is
busted, in either case, no sysfs entry, no link info. In the case
described above we will eventually get the link info as we work
through the queue of monitor events and get to the 'move' event.
https://bugzilla.redhat.com/show_bug.cgi?id=1557902
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is possible and common to rename some devices, this is especially
true for ethernet devices such as veth pairs.
In the udevEventHandleThread() we will be notified of this change but
currently we only process "add", "change" and "remove"
events. Renaming a device such as above results in a "move" event, not
a "remove" followed by and "add" or vise versa. This change will add
the new/destination device to our records but unfortunately there is
no usable mechanism to identify the old/source device to remove it
from the records. So this is admittedly only a partial fix.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in the API:
- APIs related to the graphics adapter are no longer on the
IMachine interface, but on a IGraphicsAdapter interface
- The LaunchVMProcess method takes a list of env variables
instead of a single variable containing a concatenated
list. Since we only ever pass a single env variable, we
can simply stuff it straight into a list.
- The DHCP server start method no longer needs the network
name
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Changes in the API:
- The CreatedSharedFolder method now accepts a target mount
point. Since we don't request automount, we're just passing
NULL. We could, however, use this to pass the desired
mount target from the XML config in future.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Long ago we switched the vbox driver to run inside libvirtd to avoid
libvirt.so being polluted with GPLv2-only code. Since libvirtd is not
built on Windows, we disabled vbox on Windows builds. Thus the MSCOM
glue code is not required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While I'm at it, use more g_autofree and g_autoptr() in this
file. This also fixes a possible mem-leak in
virNetDevGetVirtualFunctions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I've just got a new machine and I'm still converging on the
kernel config. Anyway, since I don't have enabled any of SRIO-V
drivers, my kernel doesn't have NET_DEVLINK enabled (i.e.
virNetDevGetFamilyId() returns 0). But this makes nodedev driver
ignore all interfaces, because when enumerating all devices via
udev, the control reaches virNetDevSwitchdevFeature() eventually
and subsequently virNetDevGetFamilyId() which 'fails'. Well, it's
not really a failure - the virNetDevSwitchdevFeature() stub
simply returns 0.
Also, move the call a few lines below, just around the place
where it's needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in v3.8.0-rc1~96, the virNetDevGetFamilyId() gets
netlink family ID for passed family name (even though it's used
only for getting "devlink" ID). Nevertheless, the function
returns 0 on an error or if no family ID was found. This makes it
harder for a caller to distinguish these two. Change the retval
so that a negative value is returned upon error, zero is no ID
found (but no error encountered) and a positive value is returned
on successful translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As explained in the previous commit, we need to relabel the file
we are restoring the domain from. That is the FD that is passed
to QEMU. If the file is not under /dev then the file inside the
namespace is the very same as the one in the host. And regardless
of using transactions, the file will be relabeled. But, if the
file is under /dev then when using transactions only the copy
inside the namespace is relabeled and the one in the host is not.
But QEMU is reading from the one in the host, actually.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1772838
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This API allows drivers to separate out handling of @stdin_path
of virSecurityManagerSetAllLabel(). The thing is, the QEMU driver
uses transactions for virSecurityManagerSetAllLabel() which
relabels devices from inside of domain's namespace. This is what
we usually want. Except when resuming domain from a file. The
file is opened before any namespace is set up and the FD is
passed to QEMU to read the migration stream from. Because of
this, the file lives outside of the namespace and if it so
happens that the file is a block device (i.e. it lives under
/dev) its copy will be created in the namespace. But the FD that
is passed to QEMU points to the original living in the host and
not in the namespace. So relabeling the file inside the namespace
helps nothing.
But if we have a separate API for relabeling the restore file
then the QEMU driver can continue calling
virSecurityManagerSetAllLabel() with transactions enabled and
call this new API without transactions.
We already have an API for relabeling a single file
(virSecurityManagerDomainSetPathLabel()) but in case of SELinux
it uses @imagelabel (which allows RW access) and we want to use
@content_context (which allows RO access).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This commit partially reverts
commit c360ea28dc
Refs: v6.2.0-rc1-1-gc360ea28dc
Author: Rafael Fonseca <r4f4rfs@gmail.com>
AuthorDate: Fri Mar 27 18:40:47 2020 +0100
Commit: Michal Prívozník <mprivozn@redhat.com>
CommitDate: Mon Mar 30 09:48:22 2020 +0200
util: virdaemon: fix compilation on mingw
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Not compiling virDaemonForkIntoBackground on Win32 is good, but the
second part of the original patch incorrectly replaced waitpid and fork
with our virProcessWait and virFork APIs. These APIs are more than just
simple wrappers and we don't want any of the extra functionality.
Especially virFork would reset any setup made before
virDaemonForkIntoBackground is called, such as logging, signal handling,
etc.
As a result of the change the additional fix in v6.2.0-67-ga87e4788d2
(util: virdaemon: fix waiting for child processes) is no longer
needed and it is effectively reverted by this commit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fixes build error introduced in
commit aa15e9259f
Author: Laine Stump <laine@redhat.com>
Date: Sun Apr 5 22:40:37 2020 -0400
qemu/conf: set HOTPLUGGABLE connect flag during PCI address set init
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Trivial comment fix, reflecting the changes in
4ee2b31804.
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Previously, we used virCapabilitiesDomainDataLookup() to fill
machine type in post parse callback if none was provided in the
domain XML. If machine type couldn't be filled in an error was
reported. After 4a4132b462 we've changed it to
virQEMUCapsGetPreferredMachine() which returns NULL, but we no
longer report an error and proceed with the post parse callbacks
processing. This may lead to a crash because the code later on
assumes def->os.machine is not NULL.
Fixes: 4a4132b462
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When preparing to do a blockcopy, the mirror image is modified so
that QEMU can access it. For instance, the mirror has seclabels
set, if it is a NVMe disk it is detached from the host and so on.
And usually, the restore is done upon successful finish of the
blockcopy operation. But, if something fails then we need to
explicitly revoke the access to the mirror image (and thus
reattach NVMe disk back to the host).
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1822538
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When we do parallel migration, The multifd-channels migration parameter
needs to be set on the destination side as well before incoming migration
URI, unless we accept the default number of connections(2).
Usually, This can be correctly handled by libvirtd. But in this case if
we use p2p + xbzrle compression without parameter '--comp-xbzrle-cache',
qemuMigrationParamsDump returns too early, The corresponding migration
parameter will not be set on the destination side, It results QEMU hangs.
Reproducer:
virsh migrate --live --p2p --comp-methods xbzrle \
--parallel --parallel-connections 3 GUEST qemu+ssh://dsthost/system
or
virsh migrate --live --p2p --compressed \
--parallel --parallel-connections 3 GUEST qemu+ssh://dsthost/system
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20200416044451.21134-1-lma@suse.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
With libpmem support compiled into qemu it will trigger the following
denials on every startup.
apparmor="DENIED" operation="open" name="/"
apparmor="DENIED" operation="open" name="/sys/bus/nd/devices/"
This is due to [1] that tries to auto-detect if the platform supports
auto flush for all region.
Once we know all the paths that are potentially needed if this feature
is really used we can add them conditionally in virt-aa-helper and labelling
calls in case </pmem> is enabled.
But until then the change here silences the denial warnings seen above.
[1]: https://github.com/pmem/pmdk/blob/master/src/libpmem2/auto_flush_linux.c#L131
Bug: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1871354
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Starting with 3b076391be
(v6.1.0-122-g3b076391be) we support http cookies. Since they may contain
somewhat sensitive information we should not format them into the XML
unless VIR_DOMAIN_DEF_FORMAT_SECURE is asserted.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We always tried to install backing store for the image even if it didn't
make sense, e.g. for a full backup into a raw image. Additionally we
didn't record the backing file into the qcow2 metadata so the image
itself contained the diff of data but reading from it would be
incomplete as it depends on the backing image.
This patch fixes both issues by carefully installing the correct backing
file when appropriate and also recording it into the metadata when
creating the image.
https://bugzilla.redhat.com/show_bug.cgi?id=1813310
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the last missing g_autofree conversion change in the module after
commit 1e2ae2e311 took care of the VIR_AUTOFREE conversion.
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Before this patch we would simply rely on QEMU failing to attach the
device. Since we have a flag in the address set telling us which
controllers support hotplug, we can fail the operation sooner.
This also assures that when hotplugging with no provided PCI address,
that we skip any controllers with hotplug='off', and attempt to assign
the device to a controller that not only supports hotplug, but also
has it enabled.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The HOTPLUGGABLE flag is set for appropriates buses in a PCI address
set, and thnis patch updates virDomainPCIAddressFlagsCompatible() to
check the HOTPLUGGABLE flag when searching for a suitable bus/slot for
a device. No devices request HOTPLUGGABLE though (yet), so there is no
observable effect.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainPCIAddressBusSetModel() is called for each PCI controller
when building an address set prior to assiging PCI addresses to
devices.
This patch adds a new argument, allowHotplug, to that function that
can be set to false if we know for certain that a particular
controller won't support hotplug
The most interesting case is in qemuDomainPCIAddressSetCreate(), where
the config of each existing controller is available while building the
address set, so we can appropriately set allowHotplug = false when the
user has "hotplug='off'" in the config of a controller that normally
would support hotplug. In all other cases, it is set to true or false
in accordance with the capability of the controller model.
So far we aren't doing anything with this bus flag in the address set.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Old behavior: If the address was manually provided by config, copy
device AUTOASSIGN flag into the bus flag, and then later on in the
function *always* check for a match of the flags (which will always
match if the address came from config, since we just copied it).
New behavior: Don't mess with the bus flags - just directly check if
the AUTOASSIGN flag matches in bus and dev, but only make the check if
the address didn't come from config (i.e. it was auto-assigned by
libvirt).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the HOTPLUGGABLE flag was originally added, it was set for all
the PCI controllers that accepted hotplugged devices, and requested
for all devices that were auto-assigned to a controller. While we're
still autoassigning to the same list of controllers, those controllers
may or may not support hotplug, so let's use the flag that fits what
we're actually doing.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new flag will be set for any controller that we decide can have
devices assigned to it automatically during PCI device assignment. In
the past PCI_CONNECT_TYPE_HOTPLUGGABLE was used for this purpose, but
that is overloading that flag, and no longer technically correct; what
we *really* want is to auto-assign devices to any pcie-root-port or
pcie-switch-downstream-port regardless of whether or not that
controller happens to have hotplug enabled.
This patch just adds the flag, but doesn't use it at all. Note that
the numbering of all the other flags was changed in order to insert
the new flag near the beginning of the list; that doesn't cause any
problem because the connect flags aren't stored anywhere between runs
of libvirtd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This caps flag is set when the qemu binary supports the option
"hotplug" for pcie-root-port, ioh3420 (Intel pcie-root-port) and
xio3130-downstream (Intel pcie-downstream-port). If it's available,
it's possible to disable hotplugging/unplugging devices on a
particular port by adding ",hotplug=off" to the qemu device
commandline. This option first appears in qemu-5.0.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support in the domXML<->native config converter for max_event_channels.
The parser and formater functions for max_grant_frames were reworked to
also parse max_event_channels. In doing so the xenbus controller is added
earlier in the config parsing, requiring a small adjustment to one of the
existing tests. Include a new test for the event channel conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting event_channels in libxl domain config object and
include a test to check that it is properly converted from XML to libxl
domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Event channels are like PV interrupts and in conjuction with grant frames
form a data transfer mechanism for PV drivers. They are also used for
inter-processor interrupts. Guests with a large number of vcpus and/or
many PV devices many need to increase the maximum default value of 1023.
For this reason the native Xen config format supports the
'max_event_channels' setting. See xl.cfg(5) man page for more details.
Similar to the existing maxGrantFrames option, add a new xenbus controller
option 'maxEventChannels', allowing to adjust the maximum value via libvirt.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The signatures of these two CPU model differ only in stepping as both
report family 6 and model 85. Skylake-Server uses stepping 4 or less and
Cascadelake-Server uses stepping 5..7.
https://bugzilla.redhat.com/show_bug.cgi?id=1761678
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU models defined in the cpu_map can use signature/@stepping attribute
to match a limited set of stepping numbers. The value is a bitmap for
bits 0..15 each corresponding to a single stepping value. For example,
stepping='4-6,9' will match 4, 5, 6, and 9. Omitting the attribute is
equivalent to stepping='0-15'.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Thanks to glib allocation functions which abort on OOM the function
cannot ever return NULL.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The CPU models in our cpu_map define their signatures using separate
family and model numbers. Let's store the signatures in the same way in
our runtime representation of the cpu_map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It can be used for separating family, model, and stepping numbers from a
single 32b integer as reported by CPUID.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will be used for freeing virCPUx86Signatures structure
introduced later in this series.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place where all
related functions will be added and rename the function as
virCPUx86SignaturesFormat for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place were all
related functions will be added and rename the function as
virCPUx86SignaturesMatch for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place were all
related functions will be added and rename the function as
virCPUx86SignaturesCopy for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The hint was introduced a long time ago when broken TSX implementation
was found in Haswell and Broadwell CPUs. Since then many more CPUs with
TSX were introduced and and disabled due to TAA vulnerability.
Thus the hint is not very useful and I think removing it is a better
choice then updating it to cover all current noTSX models.
This partially reverts:
commit 7f127ded65
cpu: Rework cpuCompare* APIs
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the virtio parameter for packed virtqueues as an optional libvirt
XML attribute to virtio-backed devices, e.g.:
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio'/>
<driver packed='on'/>
</interface>
If the attribute is omitted, the default value for this attribute is 'off' and
regular split virtqueues are used.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add the capability for QEMU's packed virtqueues for virtio that supposedly have
better cache utilization and performance compared to the default split queues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Unlike `waitpid`, `virProcessWait` only returns -1 (error) or 0
(success), so comparing that to `pid` will always be false and the
parent will report failure with:
error : main:851 : Failed to fork as daemon: No such file or directory
even though the grandchild process is succesfully running. Note that the
errno message is misleading: it was last set when trying to find a
restart state file.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reported-by: Marcin Krol <hawk@tld-linux.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Replace vm->def->disks[i] with dom_disk variable which is
initialized to the same disk.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far, libvirt generates the following path for automatic dumps:
$autoDumpPath/$id-$shortName-$timestamp
where $autoDumpPath is where libvirt stores dumps of guests (e.g.
/var/lib/libvirt/qemu/dump), $id is domain ID and $shortName is
shortened version of domain name. So for instance, the generated
path may look something like this:
/var/lib/libvirt/qemu/dump/1-QEMUGuest-2020-03-25-10:40:50
While in case of embed driver the following path would be
generated by default:
$root/lib/libvirt/qemu/dump/1-QEMUGuest-2020-03-25-10:40:50
which is not clashing with other embed drivers, we allow users to
override the default and have all embed drivers use the same
prefix. This can create clashing paths. Fortunately, we can reuse
the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, libvirt generates the following path for memory:
$memoryBackingDir/$id-$shortName/ram-nodeN
where $memoryBackingDir is the path where QEMU mmaps() memory for
the guest (e.g. /var/lib/libvirt/qemu/ram), $id is domain ID
and $shortName is shortened version of domain name. So for
instance, the generated path may look something like this:
/var/lib/libvirt/qemu/ram/1-QEMUGuest/ram-node0
While in case of embed driver the following path would be
generated by default:
$root/lib/qemu/ram/1-QEMUGuest/ram-node0
which is not clashing with other embed drivers, we allow users to
override the default and have all embed drivers use the same
prefix. This can create clashing paths. Fortunately, we can reuse
the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Note, the important change is in qemuGetMemoryBackingBasePath().
The rest is needed to pass driver around.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, libvirt generates the following path for hugepages:
$mnt/libvirt/qemu/$id-$shortName
where $mnt is the mount point of hugetlbfs corresponding to
hugepages of desired size (e.g. /dev/hugepages), $id is domain ID
and $shortName is shortened version of domain name. So for
instance, the generated path may look something like this:
/dev/hugepages/libvirt/qemu/1-QEMUGuest
But this won't work with embed driver really, because if there
are two instances of embed driver, and they both want to start a
domain with the same name and with hugepages, both drivers will
generate the same path which is not desired. Fortunately, we can
reuse the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Note, the important change is in qemuGetBaseHugepagePath(). The
rest is needed to pass driver around.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 06a19921b6.
What I haven't realized when writing this ^^ commit is that the
virQEMUDriver structure already stores the root directory path.
And since the pointer is immutable it can be accessed right from
the structure and thus there is no need to duplicate it in the
driver config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The cfg->root is going away, therefore get the info right from
the driver structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The code that generates "qemu-embed-$hash" is going to be useful
in more places. Separate it out into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initially introduced in v3.10.0-rc1~172.
When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:
$memoryBackingDir/libvirt/qemu/$id-$shortName
where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced in v1.2.17-rc1~121, the assumption was that the
driver->privileged is immutable at the time but it might change
in the future. Well, it did not ever since. It is still immutable
variable. Drop the needless accessor then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 54a401af47 split out DriverConfigInit from DriverConfigNew, but
then called it a bit late from libxlStateInitialize. The cfg is used in
libxlDriverConfigLoadFile and when uninitialized results in a crash.
Calling DriverConfigInit immediately after DriverConfigNew fixes the
crash.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all its helper functions are in qemu_validate.c, we can
move the function itself. The helpers can become static again since
they're all in the same file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This will allow to move qemuDomainDeviceDefValidate() itself in
the next patch in a cleaner way.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the function and all its static helper functions.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This function alone requires other 3 static functions to be
moved as well, thus let's move it in its own patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuDomainChrDefValidate() has a lot of static helpers functions
that needed to be moved as well.
Other functions from qemuDomainDeviceDefValidate() that were
also moved:
- qemuValidateDomainSmartcardDef
- qemuValidateDomainRNGDef
- qemuValidateDomainRedirdevDef
- qemuValidateDomainWatchdogDef
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The next big task is to move qemuDomainDeviceDefValidate() to
qemu_validation.c, which is a function that calls a lot of
other static helper functions. This patch starts it by moving
qemuDomainDeviceDefValidateAddress().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the static functions qemuDomainValidateDef() uses, as well as
qemuDomainValidateDef() itself to qemu_validate.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the only instance of g_autofree change applicable for
qemu_checkpoint.c
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When the comment in libvirtd.sasl was last updated with
commit fe772f24a6
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 20 14:10:03 2012 -0400
daemon: Avoid 'Could not find keytab file' in syslog
it was noted that only old versions of kerberos would need the
environment variable to be set: that was more than seven years
ago, so it's safe to assume that none of our current target
platforms still requires that hack and setting the appropriate
key in the configuration file will be enough.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirtd supports this feature, and virtqemud ultimately calls to
the same code so it does as well: advertise it in the sysconf file
for the latter, as is already the case for the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd we want to take advantage of socket activation
instead of keeping daemons running all the time, so we default to
shutting them down after two minutes of inactivity.
At the same time, we want it to be possible for the admin to opt
out of this behavior and disable timeouts entirely. A very natural
way to do so would be to specify a zero-length timeout, but that's
currently not accepted by the command line parser. Address that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When redefining checkpoints from scratch we'd not set the 'current'
checkpoint if there wasn't any. This meant that the code wasn't ever
able to set a 'current' checkpoint as any other one looks up if the
parent of the redefined checkpoint is current.
Since the backup code then requires the current checkpoint to start the
lookup we'd not be able to perform a backup after restoring the
checkpoint hierarchy.
Reported-by: Eyal Shenitzky <eshenitz@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Skip the liveness and capability checks when redefining checkpoints as
we don't need qemu interactions to update the metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a comment noting that job update can cause the pointer to be invalid
and thus should not be accessed after.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No callers use it any more. Additionally if qemuBlockJobUpdate was
called with the last reference of the job e.g. in
qemuBlockJobRefreshJobs, the reading of the job state would happen from
freed memory.
Reported-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageFileSupportsSecurityDriver ends up initializing the storage
file backend which after the recent changes to the daemon architecture
may end up dlopening of the backend modules.
Since this is required only for remote storage we can optimize the call
by moving the check whether the backend is supported to the branch which
deals with remote storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Treat the shortcut for chowning local files as a stand-alone section
by returning success from it and refactor the rest so that the cleanup
section is inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The same timeout as libvirtd can't be used for virtlogd: even with
socket activation in place, any message produced by QEMU on its
standard output/error between when virtlogd quits due to the timeout
and when it's started again due to socket activation will get lost.
This reverts commit 02b6005063
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 2ace7a87a8 introduced a logic bug by an improperly
modified condition where we'd skip to the else branch when reusing of
external images was requested and blockdev is available.
The original intentions were to skip the backing store update with
blockdev.
Fix it by only asserting the boolean which was used to track whether we
support update of the backing store only when blockdev is not present
along with the appropriate rename.
https://bugzilla.redhat.com/show_bug.cgi?id=1820016
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving the formatting of this attributes from -drive
to -device, the QEMU_CAPS_USB_STORAGE_WERROR capability
was used, because usb-storage was the last device to gain
this capability.
However this lead to the assumption that QEMU binaries
without the usb-storage device do not support this,
leading to breakage on s390x with blockdev.
Fixes: bb4f3543bbhttps://bugzilla.redhat.com/show_bug.cgi?id=1819250
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In previous commit:
commit e6afacb0fe
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 12 12:26:11 2020 +0000
qemu: start/stop an event loop thread for domains
A bogus comment was added claiming we didn't need to shutdown the
event thread in the qemuProcessStop method, because this would be
done in the monitor EOF callback. This was wrong because the EOF
callback only runs in the case of a QEMU crash or a guest initiated
clean shutdown & poweroff. In the case where the libvirt admin
calls virDomainDestroy, the EOF callback never fires because we
have already unregistered the event callbacks. We must thus always
attempt to stop the event thread in qemuProcessStop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are refreshing the relative paths when doing the blockjobs we
no longer need to load them upfront when doing the snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preservation of the relative relationship requires us to load the
backing store strings from the disk images. With blockdev we stopped
detecting the backing chain if it's specified in the XML so the relative
links were not loaded at that point. To preserve the functionality from
the pre-blockdev without accessing the backing chain unnecessarily
during VM startup we must refresh the relative links when relative
block commit or block pull is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=1818655
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it is impossible for VIR_ALLOC() to return an error, we
should be consistent with the rest of the code and not continue
initializing the virSecurityDeviceLabelDef structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even with GLib it is still possible for virQEMUCapsNew() to
return NULL because it calls virQEMUCapsInitialize() which is a
wrapper over pthread_once() which may fail. At least, we still
check for its retval. If it so happens that the virQEMUCapsNew()
fails and returns NULL, we should not dereference it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 5540acb9a2 added a minimum size verification for the target
size of ppc64 NVDIMMs but forgot to remove a MAX() size check that
was being used in earlier reviews of that commit. The size
verification makes this check unneeded since we're making sure
that guestArea will always be at least equal to ppc64AlignSize.
Fixes: 5540acb9a2
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is the only instance of g_autofree change applicable for
qemu_agent.c
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This fixes a FreeBSD build error from
commit a11a0e6e84
Author: Rafael Fonseca <r4f4rfs@gmail.com>
Date: Tue Mar 24 17:14:30 2020 +0100
bhyve: move video default logic to driver
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move the liveness check prior to the capability check. If the VM is
offline the capabilities are not initialized and thus we'd report the
wrong error.
https://bugzilla.redhat.com/show_bug.cgi?id=1812531
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The code attempting to clean up after a failed pull mode backup job
wrongly entered monitor but didn't clean up nor exit monitor due to a
logic bug. Fix the condition.
Introduced in a1521f84a5https://bugzilla.redhat.com/show_bug.cgi?id=1817327
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the liveness check prior to the capability check. If the VM is
offline the capabilities are not initialized and thus we'd report the
wrong error.
https://bugzilla.redhat.com/show_bug.cgi?id=1812531
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Host-model CPU definitions (and domain capabilities) will use the
original CPU models (without noTSX in their name) and explicitly disable
hle and rtm features. This way domains with host-model CPUs will be
migratable even to older versions of libvirt which do not support the
noTSX model variants.
The new models will be advertised in host capabilities and they may
be used explicitly with custom CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The element specifies whether a particular CPU model can be used when
creating a CPU definition from raw CPUID/MSR data. The @host attribute
determines whether the CPU model can be used (host='on') for creating
CPU definition for host capabilities. Usability of the model for domain
capabilities and host-model CPU definitions is controlled by the @guest
attribute.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
One of the mitigation methods for TAA[1] is to disable TSX
support on the host system. Linux added a mechanism to disable
TSX globally through the kernel command line, and many Linux
distributions now default to tsx=off. This makes existing CPU
models that have HLE and RTM enabled not usable anymore.
Add new versions of all CPU models that have the HLE and RTM
features enabled, that can be used when TSX is disabled in the
host system.
On systems disabling the features without those types defined
in cpu-maps users end up without modern CPU types in the list
of usable CPUs to use in the likes of virsh domcapabilities
or tools higher in the stack like virt-manager.
This adds:
-Cascadelake-Server-noTSX
-Icelake-Client-noTSX
-Icelake-Server-noTSX
-Skylake-Server-noTSX-IBRS
-Skylake-Client-noTSX-IBRS
Introduced in QEMU by commit v4.2.0-rc2-3-g9ab2237f19 (function)
and commit v4.2.0-rc2-4-g02fa60d101 (names)
References:
[1] TAA, TSX asynchronous Abort:
https://software.intel.com/security-software-guidance/insights/deep-dive-intel-transactional-synchronization-extensions-intel-tsx-asynchronous-aborthttps://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1853200
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200310104806.2723-2-christian.ehrhardt@canonical.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The PMU feature is enabled by default in ppc64 guests and can't
be disabled via Libvirt or QEMU [1]. The current PMU feature
implementation does not allow PMU to enabled or disabled in the
ppc64 guest. Declaring the PMU feature will make the 'pmu'
property to be passed on to QEMU, but this property isn't
available for ppc64:
qemu-kvm: can't apply global host-powerpc64-cpu.pmu=on: Property '.pmu' not found
A similar error is thrown when trying to disable the PMU.
This patch standardizes the PMU handling for ppc64 guests by:
- throwing an error if the user attempts to set the feature to
'off', given that this feature can't be turned off at all;
- allowing the feature to be declared as 'on' in the domain XML.
This is done by skipping ppc64 guests when creating the command
line for this feature.
[1] https://www.redhat.com/archives/libvir-list/2020-March/msg00874.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Hyperv features are supported by both x86 and aarch64. The <hyperv/>
declaration in the XML by itself is benign to other architectures,
but any of its 14 current features will break QEMU with an error
like this (from ppc64):
qemu-kvm: Expected key=value format, found hv_relaxed
This is a more extreme case than the one for apic eoi because we
would need an extra 'switch' statement, with all current Hyperv
features in the body of qemuDomainDefValidateFeatures(), to
check if the user attempted to activate any of them. It's easier to
simply fail to launch with any 'hyperv' declaration in the XML for
every arch which is not x86 and aarch64.
A fair disclaimer about Windows and PowerPC: the last Windows version
that ran in the architecture is the hall of famer Windows NT 4.0,
launched in 1996 and with end of extended support for the Server
version in 2004 [1]. I am acknowledging that there might be Windows
NT 4.0 users running in PowerPC, but not enough people running it
under KVM/QEMU to justify Libvirt allowing 'hyperv' to exist in the
domain XML of ppc64 domains.
[1] https://en.wikipedia.org/wiki/Windows_NT_4.0
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'pvspinlock' feature is x86 only. The "<pvspinlock/>" declaration
will always have a value 'on' or 'off', and both will break QEMU when
launching non-x86 guests. This is the error message for
"<pvspinlock state='on'/>" when running a ppc64 guest:
qemu-kvm: Expected key=value format, found +kvm_pv_unhalt
A similar error message is thrown for "<pvspinlock state='off'/>".
This patch prevents non-x86 guests from launching with any
pvspinlock setting with a more informative error message:
error: unsupported configuration: The 'pvspinlock' feature is not
supported for architecture 'ppc64' or machine type 'pseries'
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The "<apic/>" feature, although it's available only for x86 guests,
can be declared in the domain XML of other archs without errors.
But setting its 'eoi' attribute will break QEMU. For "<apic eoi='on'/>",
in a ppc64 guest:
qemu-kvm: Expected key=value format, found +kvm_pv_eoi
A similar error happens with eoi='off'.
One can argue that it's better to simply forbid launching non-x86
guests with "<apic/>" declared in the XML - it is a feature that
the architecture doesn't support and this would make it clearer
about it. This is sensible, but there are non-x86 guests that are
running with "<apic/>" declared in the domain (and A LOT of guests
running with "<acpi/>" for that matter, probably reminiscent of x86
templates that were reused for other archs) that will stop working if we
go this route.
A more subtle approach is to detect if the 'eoi' element is being set
for non-x86 guests and warn the user about it with a better error
message than the one QEMU provides. This is the new error message
when any value is set for the 'eoi' element in a ppc64 XML:
error: unsupported configuration: The 'eoi' attribute of the 'apic'
feature is not supported for architecture 'ppc64' or machine type
'pseries'.
https://bugzilla.redhat.com/show_bug.cgi?id=1236440
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Don't report cases when the guest information is not requested
explicitly and not present either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetFSInfo can
suppress error reports if the function is not supported by the guest
agent.
Since this patch removes the last use of
qemuAgentErrorCommandUnsupported the whole function is deleted as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetTimezone can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetOSInfo can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetUsers can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull in qemuAgentGetHostname so that we can suppress
error reports if the caller will not require them. Callers for now
always require error reporting but will be fixed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return 0 on success to match the documentation. The callers only check
for negative values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we don't want to log errors if an agent command is
unsupported. Wire it up into qemuAgentCheckError via qemuAgentCommandFull
and provide a thin wrapper (qemuAgentCommand) to prevent having to fix
all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainGetGuestInfoCheckSupport' despite its name was not checking
whether the info types are supported. Convert the function to return
integers and include the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic has been moved to the individual drivers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, advisory record locking lose the lock if any fd refering
to the file is closed. There doesn't seem to be a way to preserve the
lock atomically. We could eventually retake the lock if low pidfilefd
is required.
This fixes processes being leaked, as they are not killed in
virPidFileForceCleanupPath() if the lock can be taken. Here also, we may
consider this is not good enough, as a process may leak by simply
closing the pidfilefd.
Fixes commit d146105f1e ("virCommand:
Actually acquire pidfile instead of just writing it")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The WIP specification is hosted on slirp wiki at this point:
https://gitlab.freedesktop.org/slirp/libslirp/-/wikis/Slirp-Helper
We would need more feedback from various parties (including libvirt,
podman, and other developpers) before declaring a frozen version.
So for now, follow it, and feedback welcome!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the helper supports DBus, connect it to the bus and set its ID.
If the helper supports migration, register its ID to the list of
dbus-vmstate ID to migrate, and specify --dbus-incoming when
restoring the VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Helper processes may have their state migrated with QEMU data stream
thanks to the QEMU "dbus-vmstate".
libvirt maintains the list of helpers to be migrated. The
"dbus-vmstate" is added when required, and given the list of helper
Ids that must be migrated, on save & load sides.
See also:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus-vmstate.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This avoids trying to start a dbus-daemon when its already running.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the network driver code there's networkKillDaemon() which is
the same as virProcessKillPainfully(). Replace the former with
the later and drop what becomes unused function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the virtiofsd will have the pidfile open
and locked we can use virPidFileForceCleanupPath() to kill it and
unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the slirp helper will have the pidfile
open and locked we can use virPidFileForceCleanupPath() to kill
it and unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that our virCommandSetPidFile() is more intelligent we don't
need to rely on the daemon to create and lock the pidfile and use
virCommandSetPidFile() at the same time.
NOTE that as advertised in the previous commit, this was
temporarily broken, because both virCommand and
qemuProcessStartManagedPRDaemon() would try to lock the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our virCommand module allows us to set a pidfile for commands we
want to spawn. The caller constructs the string of pidfile path
and then uses virCommandSetPidFile() to tell the module to write
the pidfile once the command is ran. This usually works, but has
two flaws:
1) the child process does not hold the pidfile open & locked.
Therefore, the caller (or anybody else) can't use our fancy
virPidFileForceCleanupPath() function to kill the command
afterwards. Also, for everybody else on the system it's
needlessly harder to check if the pid from the pidfile is still
alive or not.
2) if the caller ever makes a mistake and passes the same pidfile
path for two different commands, the start of the second command
will overwrite the pidfile even though the first command might
still be running.
NOTE that this temporarily renders some command spawning
unusable, specifically those code patterns where both
virCommandSetPidFile() is used together with instructing spawned
command to acquire pidfile itself. Fortunately, there is only one
occurrence of such pattern and it is in
qemuProcessStartManagedPRDaemon(). This is fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format cookies into the backing store string without encryption as they
will not be visible on the command line when formatting a 'target' only
string. In cases when cookies or other options are used we must use the
JSON format rather than pure URI.
Add tests to validate the scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce qemuBlockStorageSourceGetCookieString which does the
concatenation so that we can reuse it later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU requires an extra wrapper object where only the "file" member is
populated. This is basically a placeholder for establishing the format
layer. We did the same in qemuDiskSourceGetProps for the old-school
JSON usage with -drive but forgot to adopt this for -blockdev.
https://bugzilla.redhat.com/show_bug.cgi?id=1804617
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemublocktest showed that we don't add the "fat:" prefix for directory
storage when formatting the backing store string. While it's unlikely to
be used it's simple enough to actually implement the support rather than
trying to forbid it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for pretty-printing of the JSON variant of the output for
consumption in tests. All current callers pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_TRISTATE_BOOL_ABSENT which maps to the 'default' string would not be
parsed back, so we shouldn't format it either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While 'namespace' is not a reserved word in C, it is in C++. Our
compilers are happy with it but syntax-hilighting in some editors
hilights is as a keyword. Rename it to prevent confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostCPUGetStatsLinux walks through every cpu in /proc/stat until it
finds cpu%cpuNum that matches with the requested cpu.
If none is found it logs the error but it should return -1, instead of 0.
Otherwise virsh nodecpustats --cpu <invalid cpu number> and API bindings
don't fail properly, printing a blank line instead of an error message.
This patch also includes an additional test for virhostcputest to avoid
this regression to happen again in the future.
Fixes: 93af79fba3
Reported-by: Satheesh Rajendran <satheera@in.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There is no need to repeat the shortName, since it's
already present in the directory path.
Also use just 'fs' instead of 'virtiofsd'.
https://bugzilla.redhat.com/show_bug.cgi?id=1816577
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace libvirt's virKeyFile by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function changes the amount of time that libvirt waits for a
response from the guest agent for all guest agent commands. Since this
is a configuration change, it should not be allowed on read-only
connections.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The agent 'guest-sync' command historically had a 5s response timeout
which was different from other agent commands, which waited forever.
When we added the ability to customize the response timeout for guest
agent commands, we intended to continue to use 5s for 'guest-sync' when
the user specified a response timeout greater than 5s, and use the
user-specified timeout if it was below 5s. Unfortunately, when
attempting to determine whether the user-specified timeout was less than
5s, we were comparing against an enum value of
VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT (which is -1) rather than against
the actual time value that it represented (5).
This change makes it so that 'guest-sync' now uses the user-specified
tiemout if it is less than 5s.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use existing function built for this exact purpose.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a QEMU process dies in the middle of a hotplug, then we fail
to restore the seclabels on the device. The problem is that if
the thread doing hotplug locks the domain object first and thus
blocks the thread that wants to do qemuProcessStop(), the
seclabel cleanup code will see vm->pid still set and mount
namespace used and therefore try to enter the namespace
represented by the PID. But the PID is gone really and thus
entering will fail and no restore is done. What we can do is to
try enter the namespace (if requested to do so) but if entering
fails, fall back to no NS mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814481
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When running a function in a forked child, so far the only thing
we could report is exit status of the child and the error
message. However, it may be beneficial to the caller to know the
actual error that happened in the child.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @src is not always a file. It may also be a directory (for
instance qemuDomainCreateDeviceRecursive() assumes that) - even
though it doesn't happen usually. Anyway, mount() can mount only
a dir onto a dir and a file onto a file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @devPath variable is not modifiable. It merely just points to
string containing path where private devtmpfs is being
constructed. Make it const so it doesn't look weird that it's not
freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
If building namespace fails somewhere in the middle (that is some
files exists under devMountsSavePath[i]), then plain rmdir() is
not enough to remove dir. Umount the temp location and use
virFileDeleteTree() to remove the directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The virFileMakePathWithMode() which is our recursive version of
mkdir() fails, it simply just returns a negative value with errno
set. No error is reported (as compared to virFileTouch() for
instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
For the few instances where we'd generate an array in dotted syntax we
should be able to parse it back. Add another step in deflattening of the
dotted syntax which reconstructs the arrays so that the backing store
parser can parse it.
https://bugzilla.redhat.com/show_bug.cgi?id=1466177
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the code so that there's a clean separation once we'll want do
do other steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory handling to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virBitmapNewEmpty can't fail now so we can make it obvious and fix all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageEncryptionSecretPtr may have a string inside it, thus we must
copy the string too. Use virSecretLookupDefCopy to do that.
Caused by non-obvious code introduced in 756b46ddd2 and later 47e88b33b
which added a string that needed to be copied.
https://bugzilla.redhat.com/show_bug.cgi?id=1814923
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns succes so there's no need for a return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBlockStorageSourceGetFormatRawProps aggregated both formats but
since we now have props specific for either of those formats it's
unwanted to aggregate the code such way. Split out the 'luks' props
formatter into qemuBlockStorageSourceGetFormatLUKSProps.
The wrong separation demonstrates istself on formatting of the 'size'
and 'offset' attributes for the 'luks' driver which does not conform
to the qapi schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'luks' driver in qemu is as any other non-raw format driver and thus
doesn't support the properties for 'slice'. Since libvirt considers
luks files to be raw+encryption we need to special case them when
dealing with the slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuBlockStorageSourceNeedsStorageSliceLayer which will hold
the decision logic and fix all places that open-code it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A fixup to patch [1]. We need to reset await_event in all
error paths.
[1] 52532073d : qemu: remove redundant needReply argument of qemuAgentCommand
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In one of my previous commits I've introduced code that creates
all devices for given (possible) multipath target. But I've made
a mistake there - the code accesses 'next->path' without checking
if the disk source is local. Note that the 'next->path' is
NULL/doesn't make sense for VIR_STORAGE_TYPE_NVME.
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814947
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It seems like CD-ROMs may have no 'fileName' property specified in case
there is nothing configured as attachment for the drive. Hence, make
sure that virVMXParseDisk() do not consider it mandatory anymore,
considering it an empty block cdrom device. Sadly virVMXParseDisk() is
used also to parse disk and floppies, so make sure that a NULL fileName
is handled in cdrom- and floppy-related paths.
https://bugzilla.redhat.com/show_bug.cgi?id=1808610
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Move earlier the checks for skipping a hard disk when parsing a CD-DROM,
and for skipping a CD-ROM when parsing a hard disk. This should have no
behaviour changes, and avoids to add repeated checks in following
commits.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Many calls of qemuMonitorDelObject don't actually check the return value
or report the error from the object deletion itself since they are on
cleanup paths. In some cases this can lead to reporting of spurious
errors e.g. when qemuMonitorDelObject is used to clean up a possibly
pre-existing objects.
Add a new argument for qemuMonitorDelObject which controls whether
the internals report errors from qemu and fix all callers accordingly.
Note that some of the cases on device unplug which check the error code
don't in fact propagate the error to the user, but in this case it is
important to add the log entry anyways for tracing that the device
deletion failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1784040
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we'll need to check whether there was an error but avoid
reporting an actual libvirt error. Rename qemuMonitorJSONCheckError to
qemuMonitorJSONCheckErrorFull with a new flag to suppress the error
reporting and add a wrapper with the original name so that callers don't
need to be fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'g_autoptr' and remove the cleanup label and ret variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing media we'd attempt to remove the managed pr daemon even if
neither of the images involved in the media change used it. This caused
libvirtd to log a spurious error:
2020-03-18 01:41:19.832+0000: 643207: error : qemuMonitorJSONCheckError:412 : internal error: unable to execute QEMU command 'object-del': object 'pr-helper0' not found
With this patch we completely avoid calling the deletion code.
https://bugzilla.redhat.com/show_bug.cgi?id=1814486
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop which checks whether the vcpus are in proper configuration for
the requested hot(un)plug skips the first modified vcpu. This means
that 'firstvcpu' which is used to print the error message in case the
configuration is not suitable would never point to the first modified
vcpu.
In cases such as:
<vcpu placement='auto' current='5'>8</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no'/>
<vcpu id='1' enabled='yes' hotpluggable='no'/>
<vcpu id='2' enabled='yes' hotpluggable='no'/>
<vcpu id='3' enabled='yes' hotpluggable='no'/>
<vcpu id='4' enabled='yes' hotpluggable='no'/>
<vcpu id='5' enabled='no' hotpluggable='yes'/>
<vcpu id='6' enabled='no' hotpluggable='yes'/>
<vcpu id='7' enabled='no' hotpluggable='yes'/>
</vcpus>
# virsh setvcpu --config --disable upstream 1
error: invalid argument: vcpu '-1' can't be modified as it is followed by non-hotpluggable online vcpus
After this fix the proper vcpu is reported in the error message:
# virsh setvcpu --config --disable upstream 1
error: invalid argument: vcpu '1' can't be modified as it is followed by non-hotpluggable online vcpu
https://bugzilla.redhat.com/show_bug.cgi?id=1611061
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When initializing virQEMUDriverConfig structure we are given the
root directory for possible embed connection. Save it for future
use. While we could get it later from @uri member, it's not as
easy as dereferencing a pointer (virURIParse() +
virURIGetParam() + error reporting).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The check attribute was completely ignored for host-passthrough CPUs
even if they explicitly requested some features to be enabled. For
example, a domain with the following CPU definition
<cpu mode='host-passthrough' check='full'>
<feature policy='require' name='svm'/>
</cpu>
would happily start even when 'svm' cannot be enabled.
Let's call virCPUArchUpdateLive for host-passthrough CPUs with
VIR_CPU_CHECK_FULL to make sure the architecture specific code can
validate the provided virtual CPU against the desired definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1515677
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding more checks into the existing if statements would turn them into
an unreadable mess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The updateLive CPU sub-driver function is supposed to be called only for
a subset of CPU definitions. Let's make it more obvious by turning a
negative test and return into a positive check.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit is related to RTC timer device too. HPET is being shared
from host device through `localtime` clock. This timer is available
creating a new timer using `hpet` name.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit share host Real Time Clock device (rtc) into LXC containers
to support hardware clock. This should be available setting up a `rtc`
timer under clock section. Since this option is not emulated, it should
be available only for `localtime` clock. This option should be readonly
due to security reasons.
Before:
root# hwclock --verbose
hwclock from util-linux 2.32.1
System Time: 1581877557.598365
Trying to open: /dev/rtc0
Trying to open: /dev/rtc
Trying to open: /dev/misc/rtc
No usable clock interface found.
hwclock: Cannot access the Hardware Clock via any known method.
Now:
root# hwclock
2020-02-16 18:23:55.374134+00:00
root# hwclock -w
hwclock: ioctl(RTC_SET_TIME) to /dev/rtc to set the time failed:
Permission denied
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function repeatedly checked the first element rather than iterating
through the array.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Allocate space also for the terminating NULL.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the node device APIs are a little odd because they accept a
virNodeDevicePtr object but are still implemented by the virt drivers.
The first thing the virt drivers need to do is get the XML config
associated with the node device, and that means talking to the node
device driver.
This worked previously because with monolithic libvirtd, both the
virt driver and node device driver were in the same daemon and thus
a single virConnectPtr can talk to both drivers.
With the split daemon world though, the virNodeDevicePtr passed into
the APIs is associated with the QEMU driver virConnectPtr, which has
no ability to invoke APIs against the node device driver. We must thus
get a duplicate virNodeDevicePtr object which is associated with a
virConnectPtr for the node device driver.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The node device APIs are a little unusual because we don't use a
"remote_nonnull_node_device" object on the wire, instead we just
have a "remote_string" for the device name. This meant dispatcher
code generation needed special cases. In doing so we mistakenly
used the virNodeDeviceLookupByName() API which gets dispatched
into the driver, instead of get_nonnull_node_device() which
directly populates a virNodeDevicePtr object.
This wasn't a problem with monolithic libvirtd, as the
virNodeDeviceLookupByName() API call was trivially satisfied
by the registered driver, albeit with an extra (undesirable)
authentication check. With the split daemons, the call to
virNodeDeviceLookupByName() fails in virtqemud, because the
node device driver obviously doesn't exist in that daemon.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Despite their names, the following APIs:
virNodeDeviceDettach
virNodeDeviceDetachFlags
virNodeDeviceReAttach
virNodeDeviceReset
are all handled by the virt drivers, not the node device driver.
A bug in the RPC generator meant that these APIs were sent to
the nodedev driver for handling. This caused breakage with the
split daemons, since nothing was available to process them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 7b79ee2f78 makes assumptions about die_id parsing in
the sysfs that aren't true for Power hosts. In both Power8
and Power9, running 5.6 and 4.18 kernel respectively,
'die_id' is set to -1:
$ cat /sys/devices/system/cpu/cpu0/topology/die_id
-1
This breaks virHostCPUGetDie() parsing because it is trying to
retrieve an unsigned integer, causing problems during VM start:
virFileReadValueUint:4128 : internal error: Invalid unsigned integer
value '-1' in file '/sys/devices/system/cpu/cpu0/topology/die_id'
This isn't necessarily a PowerPC only behavior. Linux kernel commit
0e344d8c70 added in the former Documentation/cputopology.txt, now
Documentation/admin-guide/cputopology.rst, that:
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
not defined by include/asm-XXX/topology.h:
1) topology_physical_package_id: -1
2) topology_die_id: -1
(...)
This means that it might be expected that an architecture that
does not implement the die_id element will mark it as -1 in
sysfs.
It is not required to change die_id implementation from uInt to
Int because of that. Instead, let's change the parsing of the
die_id in virHostCPUGetDie() to read an integer value and, in
case it's -1, default it to zero like in case of file not found.
This is enough to solve the issue Power hosts are experiencing.
Fixes: 7b79ee2f78
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During startup the udev node device driver impl uses a background thread
to populate the list of devices to avoid blocking the daemon startup
entirely. There is no synchronization to the public APIs, so it is
possible for an application to start calling APIs before the device
initialization is complete.
This was not a problem in the old approach where libvirtd was started
on boot, as initialization would easily complete before any APIs were
called.
With the use of socket activation, however, APIs are invoked from the
very moment the daemon starts. This is easily seen by doing a
'virsh -c nodedev:///system list'
the first time it runs it will only show one or two devices. The second
time it runs it will show all devices. The solution is to introduce a
flag and condition variable for APIs to synchronize against before
returning any data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't rely on error check and assign hostname only when non-NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a block-commit fails we should at least re-enable the bitmaps so that
the operation can be re-tried.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Merge the bitmaps into base of the block commit after the job finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Active layer block commit makes the 'base' image the new top image of
the disk after it finishes. This means that all bitmap operations need
to be handled prior to this happening as we'd lose writes otherwise.
The ideal place is to handle it when pivoting to the new image as only
guest-writes would be happening after this point.
Use qemuBlockBitmapsHandleCommitFinish to calculate the merging
transaction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
On start of the commit job, we need to disable any active bitmap in the
base. Use qemuBlockBitmapsHandleCommitStart to calculate which and call
the appropriate QMP APIs. We use blockdev-reopen to make the 'base'
writable to disable the bitmaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add an argument to qemuBlockJobDiskNewCommit to propagate the list of
disabled bitmaps into the job data structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuBlockBitmapsHandleCommitStart prepares for disabling the bitmaps in
the 'base' of the commit job so that the bitmaps are not dirtied by the
commit job. This needs to be done prior to start of the commit job.
qemuBlockBitmapsHandleCommitFinish then calculates the necessary merges
that agregate all the bitmaps between the commited images and write them
into the base bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Starting a commit job will require disabling bitmaps in the base image
so that they are not dirtied by the commit job. We need to store a list
of the bitmaps so that we can later re-enable them.
Add a field and status XML handling code as well as a test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
I'll be adding more fields to care about so splitting the code out will
be better long-term.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
I'll be adding more fields to care about so splitting the code out will
be better long-term.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since capabilities are not present for inactive VMs we'd report that we
don't support '--delete' or committing while checkpoints exist rather
than the proper error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The code deleting checkpoints needs the name of the parent checkpoint's
disk's bitmap but was using the disk alias instead. This would create
wrong bitmaps after deleting some checkpoints.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Qemu's bitmap APIs don't reopen the appropriate images read-write for
modification. It's libvirt's duty to reopen them via blockdev-reopen
if we wish to modify the bitmaps.
Use the new helpers to reopen the images for bitmap manipulation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a set of helpers to call blockdev-reopen in certain scenarios
Libvirt will use the QMP command to turn certain members of the backing
chain read-write for bitmap manipulation and we'll also want to use it
to replace/install the backing chain of a qcow2 format node.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This capability will be asserted once qemu stabilizes 'blockdev-reopen'.
For now we just add the capability so that we can introduce some code
that will use the reopening call. This will show our willingness to
adopt use of reopen and help qemu developers stabilize it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The logic for querying hotpluggable CPUs needs to sort the list
of CPUs returned by QEMU. Unfortunately our sorting method failed
to use the die_id field, so CPUs were not correctly sorted.
This is seen when configuring a guest with partially populated
CPUs
<vcpu placement='static' current='1'>16</vcpu>
<cpu...>
<topology sockets='4' dies='2' cores='1' threads='2'/>
</cpu>
Then trying to start it would fail:
# virsh -c qemu:///system start demo
error: Failed to start domain demo
error: internal error: qemu didn't report thread id for vcpu '0'
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently don't model the 'ssh' protocol properties properly and
since it seems impossible for now (agent path passed via environment
variable). To allow libguestfs to work as it used in pre-blockdev era we
must carry the properties over to the command line. For this instance we
just store it internally and format it back.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libguestfs abuses a quirk of qemu's parser to accept also other variants
of the 'sslverify' field which would be valid on the command line but
are not documented in the QMP schema.
If we encounter the 'off' string instead of an boolean handle it rather
than erroring out to continue support of pre-blockdev configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
