Fix the virStorageBackendFileSystemVolDelete method to not use
unlink() unconditionally. It must use rmdir() for volumes which
are directories. It should also raise an error if given a volume
which has the network/block type.
Per the typical use of libvirt is to fork the qemu process with
qemu:qemu. Setting the pool permission mode as 0700 by default
will prevent the guest start with permission reason.
Define macro for the default pool and vol permission modes
incidentally.
Since we are not yet using the virNetServerPtr object for running
the event loop, we can't use virNetServerQuit(). Instead set the
global 'quit' flag in libvirt_lxc
This patch adds test data that describe a machine that has two physical
processors that don't share same core id's on their cores. On this data
the "virsh nodeinfo" reported that the machine had 10 cores per socket
while the processor had only 8. (Before fixing nodeinfo gathering code).
This patch changes the way data to fill the nodeinfo structure are
gathered. We've gathere the test data by iterating processors an sockets
separately from nodes. The reported data was based solely on information
about core id. Problems arise when eg cores in mulit-processor machines
don't have same id's on both processors or maybe one physical processor
contains more NUMA nodes.
This patch changes the approach how we detect processors and nodes. Now
we start at enumerating nodes and for each node processors, sockets and
threads are enumerated separately. This approach provides acurate data
that comply to docs about the nodeinfo structure. This also enables to
get rid of hacks: see commits 10d9038b74,
ac9dd4a676. (Those changes in nodeinfo.c
are efectively reverted by this patch).
This patch also changes output of one of the tests, as the processor
topology is now acquired more precisely.
This patch adds test data needed by the new way node information will be
gathered. This patch adds symlinks to cpu cores to their corresponding
node directory.
Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Added s390-virtio machine type to the XML schema for domains in order
to not fail the domain schema tests.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.
V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This is in preparation of the enablement of s390 guests with virtio devices.
The assignment of device addresses happens in different places, i.e. the
qemu driver and process modules as well as in the unit tests in slightly
different flavors. Currently, these are PPC spapr-vio and PCI
devices, virtio-s390 (not PCI based) will follow.
By optionally passing to qemuDomainAssignAddresses the domain
object and the capabilities it is now possible to call the function
from most of the places (except for hotplug) where address assignment
is done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This makes the driver fail with a clear error message in case of UUID
collisions (for example if somebody copied a container configuration
without updating the UUID) and also raises an error on other hash map
failures.
OpenVZ itself doesn't complain about duplicate UUIDs since this
parameter is only used by libvirt.
Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:
if (strstr(def->emulator, "kvm")) {
def->virtType = VIR_DOMAIN_VIRT_KVM;
def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}
Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features
The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother). So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages. This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.
* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
Domains configured with autostart may fail to start if the host
network stack has not been started. E.g. when using bridged
networking autostarting a domain can fail with
libvirtd[1403]: 2012-06-20 13:23:49.833+0000: 1485: error :
qemuAutostartDomain:177 : Failed to autostart VM 'test': Cannot get
interface MTU on 'br0': No such device
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
The previous commit (56f34e5) accidentally bumped to latest gnulib,
but that adds a syntax check for CVE-2012-3386 that won't be fixed
until Automake 1.11.6/1.12.2 lands in more distros.
* .gnulib: Undo accidental commit.
Commit 122fa379de introduces option to
store more than one host entry in a storage pool source definition. That
commit causes a regression, where a check is added that only one host
entry should be present (that actualy is not present as the source
structure was just allocated and zeroed) instead of allocating memory
for the host entry.
As the storage pool sources are stored in a list of structs, the pointer
returned by virStoragePoolSourceListNewSource() shouldn't be freed as it
points in the middle of a memory block. This combined with a regression
that takes the error path every time on caused a double-free abort on
the src struct in question.
Previous commits added code to unmount the existing /proc,
/sys and /dev hierarchies on the root filesystem of the
container. This should only have been done if the container's
root filesystem was the same as the host's root. ie if
the root source is '/'. As it is, this causes LXC containersr
to fail to start if their root source is not '/'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for introducing a full RPC protocol for
libvirt_lxc, switch over to using the virNetServer APIs
for the monitor connection
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While it is not currently used elsewhere in libvirt, the code
for finding a free loop device & associating a file with it
is not LXC specific. Move it into the viffile.{c,h} file where
potentially shared code is more commonly kept.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the cgroup object into virLXCControllerPtr and rename
all the setup methods to include 'Cgroup' in their name
if appropriate
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the monitor FDs into the virLXCControllerPtr object
removing the need for the 'struct lxcMonitor' object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCControllerRun method is getting a little too large,
and about 50% of its code is related to setting up a /dev/pts
mount. Move the latter out into a dedicated method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the security manager object into the virLXCControllerPtr
object. Also simplify the code creating it in the first place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the list of loop device FDs into the virLXCControllerPtr
object and make sure that virLXCControllerStopInit will
close them all
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Turn 'struct lxc_console' into virLXCControllerConsolePtr and make it
a part of virLXCControllerPtr
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Keep a record of the init PID in the virLXCController object
and create a virLXCControllerStopInit method for killing this
process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the veth device name state into the virLXCControllerPtr
object and stop passing it around. Also use size_t instead
of unsigned int for the array length parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller code is having to pass around an ever increasing
number of parameters between methods. To make the code more managable
introduce a virLXCControllerPtr to hold all this state, starting with
the container name and virDomainDefPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the build of libvirt_lxc will cause recompilation
of all sources under src/util, src/conf, src/security and
more. Switch the libvirt_lxc process to link against the
libtool convenience libraries that are already built as
part of the main libvirt.os & libvirtd build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactor the RPC server dispatcher code so that if 'max_workers==0'
the entire server will run single threaded. This is useful for
use cases where there will only ever be 1 client connected
which serializes its requests
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The callback that is invoked when a new RPC client is
initialized does not have any opaque parameter. Add
one so that custom data can be passed into the callback
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recently the Ceph project defaulted auth_supported from 'none' to 'cephx'.
When no auth information was set for Ceph disks this would lead to librados defaulting to
'cephx', but there would be no additional authorization information.
We now explicitly set auth_supported to none when passing down arguments to Qemu.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.
This patch adds an internal function vmwareUpdateVMStatus to
update the real state of the domain. This function is used in
various places in the driver, in particular to detect when
the domain has been shut down by the user with the "halt"
command.
QEMU domains were marked as having managed save image even if they were
saved using the regular save. With this patch, domains are marked so
only when using managed save API.
