The controller model is slightly unusual in that the default value is
-1, not 0. As a result the default value is not covered by any of the
existing enum cases. This in turn means that any switch() statements
that think they have covered all cases, will in fact not match the
default value at all. In the qemuDomainDeviceCalculatePCIConnectFlags()
method this has caused a serious mistake where we fallthrough from the
SCSI controller case, to the VirtioSerial controller case, and from
the USB controller case to the IDE controller case.
By adding explicit enum constant starting at -1, we can ensure switches
remember to handle the default case.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
commit 77a12987a4 changed the "virDomainChrSourceDef source" inside
virDomainChrDef to "virDomainChrSourceDefPtr source", and started
allocating source inside virDomainChrDefNew(), but vboxDumpSerial()
was allocating a virDomainChrDef with a simple VIR_ALLOC() (i.e. never
calling virDomainChrDefNew()), so source was never initialized,
leading to a SEGV any time a serial port was present. The same problem
was created in vboxDumpParallel().
This patch changes vboxDumpSerial() and vboxDumpParallel() to use
virDomainChrDefNew() instead of VIR_ALLOC(), and changes both of those
functions to return an error if virDomainChrDef() (or any other
allocation) fails.
This resolves: https://bugzilla.redhat.com/1536649
As it turns out virDomainDeviceFindControllerModel was only ever
called for SCSI controllers using VIR_DOMAIN_CONTROLLER_TYPE_SCSI
as a parameter.
So rename to virDomainDeviceFindSCSIController and rather than
return a model, let's return a virDomainControllerDefPtr to let
the caller reference whatever it wants.
In VirtualBox SAS and SCSI are separate controller types whereas libvirt
does not make such distinction. This patch adds support for attaching
the VBOX SAS controllers by mapping the 'lsisas1068' controller model in
libvirt XML to VBOX SAS controller type. If VBOX VM has disks attached
to both SCSI and SAS controller libvirt domain XML will have two
<controller type='scsci'> elements with index and model attributes set
accordingly. In this case, each respective <disk> element must have
<address> element specified to assign it to respective SCSI controller.
This patch adds <address> element to each <disk> device since device
names alone won't adequately reflect the storage device layout in the
VM. With this patch, the ouput produced by dumpxml will faithfully
reproduce the storage layout of the VM if used with define.
Previously any removable storage device without media attached was
omitted from domain XML dump. They're still (rightfully) omitted in
snapshot XML dump but need to be accounted properly to for the device
names to stay in 'sync' between domain and snapshot XML dumps.
Primer the code for further changes:
* move variable declarations to the top of the function
* group together free/release statements
* error check and report VBOX API calls used
If a VBOX VM has e.g. a SATA and SCSI disk attached, the XML generated
by dumpxml used to produce "sda" for both of those disks. This is an
invalid domain XML as libvirt does not allow duplicate device names. To
address this, keep the running total of disks that will use "sd" prefix
for device name and pass it to the vboxGenerateMediumName which no
longer tries to "compute" the value based only on current and max
port and slot values. After this the vboxGetMaxPortSlotValues is not
needed and was deleted.
Both vboxSnapshotGetReadWriteDisks and vboxSnapshotGetReadWriteDisks do
not need to free the def->disks on cleanup because it's being done by
the caller via virDomainSnaphotDefFree
This patch prepares the vboxSnapshotGetReadOnlyDisks and
vboxSnapshotGetReadWriteDisks functions for further changes so that
the code movement does not obstruct the gist of those future changes.
This is done primarily because we'll need to know the type of vbox
storage controller as early as possible and make decisions based on
that info.
With this patch, the vbox driver will no longer attach all supported
storage controllers by default even if no disk devices are associated
with them. Instead, it will attach only those that are implicitly added
by virDomainDefAddImplicitController based on <disk> element or if
explicitly specified via the <controller> element.
Since the VBOX API requires to register an initial VM before proceeding
to attach any remaining devices to it, any failure to attach such
devices should result in automatic cleanup of the initially registered
VM so that the state of VBOX registry remains clean without any leftover
"aborted" VMs in it. Failure to cleanup of such partial VMs results in a
warning log so that actual define error stays on the top of the error
stack.
Original code was checking for non empty disk source before proceeding
to actually attach disk device to VM. This prevented from creating
empty removable devices like DVD or floppy. Therefore, this patch
re-organizes the loop work-flow to allow such configurations as well as
makes the code follow better libvirt practices. Additionally, adjusted
debug logs to be more helpful - removed old ones and added new which
give more valuable info for troubleshooting.
Previously, if one tried to define a VBOX VM and the API failed to
perform the requested actions for some reason, it would just log the
error and move on to process remaining disk definitions. This is not
desired as it could result in incorrectly defined VM without the caller
even knowing about it. So now all the code paths that call
virReportError are now treated as hard failures as they should have
been.
Remove the setting since it's unused as of commit 34364df3 which should
have never copied it in from the old code which ended up getting removed
as part of commit c7c286c6.
This commit primes vboxAttachDrives for further changes so when they
are made, the diff is less noisy:
* move variable declarations to the top of the function
* add disk variable to replace all the def->disks[i] instances
* add cleanup at the end of the loop body, so it's all in one place
rather than scattered through the loop body. It's purposefully
called 'cleanup' rather than 'skip' or 'continue' because future
commit will treat errors as hard-failures.
Previously, the driver was computing VBOX's devicePort/deviceSlot values
based on device name and max port/slot values. While this worked, it
completely ignored <address> values. Additionally, libvirt's built-in
virDomainDiskDefAssignAddress already does a good job setting default
values on virDomainDeviceDriveAddress struct which we can use to set
devicePort and deviceSlot and accomplish the same result while allowing
the customizing those via XML. Also, this allows to remove some code
which will make further patches smaller.
VirutalBox has a IVRDEServerInfo structure available that
gives the effective runtime port that the VM is using when it's
running. This is useful when the "TCP/Ports" VBox property was set to
port range (e.g. via autoport = "yes" or via VBoxManage) in which
case it would be impossible to get the "active" port otherwise.
virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Added only in drivers that were already calling
virCapabilitiesInitNUMA(). Instead of refactoring all the callers to
behave the same way in case of error, just follow what the callers are
doing for all the functions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
* remove _vboxIID_v2_x and _vboxIID_v3_x structs and repalce with one
_vboxIID as all supprted vbox versions have the same IID structure.
* remove vboxIIDUnion that was used to abstract version depended IID
differences.
* remove IID_MEMBER macro and use the new vboxIID directly.
The IVRDxServer was used because vbox < 4 used to have IVRDPServer
whereas vbox >= 4 has IVRDEServer. Now that support for legacy
versions is being removed, we can use IVRDEServer.
* removed oldMediumInterface flag and related code that was used for
vbox 2.x
* remove accelerate2DVideo and networkRemoveInterface flags which were
also conditionals for handling legacy vbox versions.
* the getMachineForSession is always true for 4.0+. This also means that
checkflag argument in openSessionForMachine no longer has any meaning
because it was or'ed with getMachineForSession (always true)
* remove supportScreenshot flag - vbox 4.0+ supports it
* remove detachDevicesExplicitly flag only relevant for < 4.0
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
* add vboxDriver object to serve as a singleton global object that
holds references to IVirtualBox and ISession to be shared among
multiple connections. The vbox_driver is instantiated only once in
the first call vboxGetDriverConnection function that is guarded by
a mutex.
* call vbox API initialize only when the first connection is
established, and likewise uninitialize when last connection
disconnects. The prevents each subsequent connection from overwriting
IVirtualBox/ISession instances of any other active connection that
led to libvirtd segfaults. The virConnectOpen and virConnectClose
implementations are guarded by mutex on the global vbox_driver_lock
where the global vbox_driver object counts connectios and decides
when it's safe to call vbox's init/uninit routines.
* add IVirutalBoxClient to vboxDriver and use it to in tandem with newer
pfnClientInitialize/pfnClientUninitalize APIs for vbox versions that
support it, to avoid usage of the old pfnComInitialize/Uninitialize.
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
