We need a common internal function for starting managed domains to be
used during autostart. This patch factors out relevant code from
qemudDomainStart into qemudDomainObjStart and makes it use the
refactored code for domain restore instead of calling qemudDomainRestore
API directly.
We need to be able to restore a domain which we already locked and
started a job for it without undoing these steps. This patch factors
out internals of qemudDomainRestore into separate functions which work
for locked objects.
The current cleanup: in StartVMDaemon path is a poor duplication.
qemuShutdownVMDaemon can handle teardown for inactive VMs, so let's use it.
v2: Remove old abort: label, only use cleanup:
There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer. Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
Approximately 60 messages were marked. Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052
Run this command:
git grep -l VIR_WARN|xargs perl -pi -e \
's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'
There were three very similar uses of qemuMonitorAddDrive.
This change makes the three 17-line sequences identical.
* src/qemu/qemu_driver.c (qemudDomainAttachPciDiskDevice): Detect
failure. Add VIR_WARN and braces.
(qemudDomainAttachSCSIDisk): Add VIR_WARN and braces.
(qemudDomainAttachUsbMassstorageDevice): Likewise.
Any method which intends to invoke a monitor command must have
a check for virDomainObjIsActive() before using the monitor to
ensure that priv->mon != NULL.
There is one subtle edge case in this though. If a method invokes
multiple monitor commands, and calls qemuDomainObjExitMonitor()
in between two of these commands then there is no guarentee that
priv->mon != NULL anymore. This is because the QEMU process may
exit or die at any time, and because qemuDomainObjEnterMonitor()
releases the lock on virDomainObj, it is possible for the background
thread to close the monitor handle and thus qemuDomainObjExitMonitor
will release the last reference allowing priv->mon to become NULL.
This affects several methods, most notably migration but also some
hotplug methods. This patch takes a variety of approaches to solve
the problem, depending on the particular usage scenario. Generally
though it suffices to add an extra virDomainObjIsActive() check
if qemuDomainObjExitMonitor() was called during the method.
* src/qemu/qemu_driver.c: Fix multiple potential NULL pointer flaws
in usage of the monitor
* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Upon look-up failure,
i.e., vm==NULL, goto cleanup, rather than to "endjob", superficially
since the latter would dereference vm, but more fundamentally because
we certainly don't want to call qemuDomainObjEndJob before we've
even attempted qemuDomainObjBeginJob.
A fedora translator filed:
https://bugzilla.redhat.com/show_bug.cgi?id=580816
Pointing out these two error messages as unclear: "write save" sounds
like a typo without context, and lack of a colon made the second message
difficult to parse.
qemuReadLogOutput early VM death detection is racy and won't always work.
Startup then errors when connecting to the VM monitor. This won't report
the emulator cmdline output which is typically the most useful diagnostic.
Check if the VM has died at the very end of the monitor connection step,
and if so, report the cmdline output.
See also: https://bugzilla.redhat.com/show_bug.cgi?id=581381
* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Avoid NULL-deref
upon unknown UUID. Call qemuDomainObjBeginJob(vm) only after
ensuring that vm != NULL, not before. This potential NULL-deref
was introduced by commit 2c555d87b0.
The code specifies driver->cacheDir as the format string,
but it usually doesn't contain '%s', so the subsequent
argument, "/qemu.mem.XXXXXX", is always ignored.
The patch fixes the misuse.
When QEMU runs with its disk on NFS, and as a non-root user, the
disk is chownd to that non-root user. When migration completes
the last step is shutting down the QEMU on the source host. THis
normally resets user/group/security label. This is bad when the
VM was just migrated because the file is still in use on the dest
host. It is thus neccessary to skip the reset step for any files
found to be on a shared filesystem
* src/libvirt_private.syms: Export virStorageFileIsSharedFS
* src/util/storage_file.c, src/util/storage_file.h: Add a new
method virStorageFileIsSharedFS() to determine if a file is
on a shared filesystem (NFS, GFS, OCFS2, etc)
* src/qemu/qemu_driver.c: Tell security driver not to reset
disk labels on migration completion
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
src/security/security_selinux.c, src/security/security_driver.h,
src/security/security_apparmor.c: Add ability to skip disk
restore step for files on shared filesystems.
The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk
* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
and add missing teardown code in unplug path
QEMU is gaining a new monitor command netdev_add for hotplugging
NICs using the netdev backend code. We already support this on
the command this, though it is disabled. This adds support for
hotplug too, also to remain disabled until 0.13 QEMU is released
* src/qemu/qemu_driver.c: Support netdev hotplug for NICs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for netdev_add and netdev_remove commands
With the introduction of the generic qemu device model, unplugging
SCSI disks works like a charm, so support it in libvirt.
* src/qemu/qemu_driver.c: Add qemudDomainDetachSCSIDiskDevice() to do the
unplugging, extend qemudDomainDetachDeviceAdd().
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).
I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling. I also verified that the fix doesn't
affect normal migration with shared storage.
WIN32 is always defined when __MINGW32__ is defined, but the
converse is not true. WIN32 is more generic, if someone were
to ever attempt porting to a microsoft compiler. This does
not affect Cygwin, which intentionally does not define WIN32.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Use more
generic flag macro.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD)
(virStorageBackendRunProgRegex): Likewise.
* tools/console.h (vshRunConsole): Likewise.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
const char *reason,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
When using -device syntax, the IO event will have a different
prefix, 'drive-' that needs to be skipped over before matching
against the libvirt disk alias
* src/qemu/qemu_driver.c: Skip QEMU_DRIVE_HOST_PREFIX in IO event
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
The previous commit changes a goto from 'endjob' to 'cleanup',
leaving the endjob label unused. Remove it to avoid compile
warning.
* src/qemu/qemu_driver.c: Remove 'endjob' label
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): When setting
"vm" to NULL, jump over vm-dereferencing code to "cleanup".
(qemuDomainRevertToSnapshot): Likewise.
In cases where the security driver failed to restore a label after a
guest has saved, we mistakenly jumped to the error cleanup paths.
This is not good, because the operation has in fact completed and
cannot be rolled back completely. Label restore is non-critical, so
just log the problem instead. Also add a missing restore call in
the error cleanup path
* src/qemu/qemu_driver.c: Fix handling of security driver
restore failures in QEMU domain save
When cgroups is enabled, access to block devices is likely to be
restricted to a whitelist. Prior to saving a guest to a block device,
it is necessary to add the block device to the whitelist. This is
not required upon restore, since QEMU reads from stdin
* src/qemu/qemu_driver.c: Add block device to cgroups whitelist
if neccessary during domain save.
