This reverts commit 7300ccc9b3.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
The meson 0.60.0 release introduced a bug with the '/' operator when
using an empty path component. '/foo' / '' will now result in '/foo'
not '/foo/'
https://github.com/mesonbuild/meson/issues/9450
This breaks libvirt because xsltproc requires the trailing '/' on the
output directory path. Fortunately the explicit 'join_paths' function
is not affected by the regression
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit extends libvirt XML configuration to support luks2 encryption format.
This means that <encryption format="luks2" engine="librbd"> becomes valid.
Currently librbd is the only engine that supports this new format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds a new encryption engine property which
allows the user to use this new encryption engine.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit extends libvirt XML configuration to support a custom encryption engine.
This means that <encryption format="luks" engine="qemu"> becomes valid.
The only engine for now is qemu. However, a new engine (librbd) will be added in an upcoming commit.
If no engine is specified, qemu will be used (assuming qemu driver is used).
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Describes the format of the newly added VPD capability and gives and
example for a real-world device.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some people from Red Hat does not use 'redhat.com' domain emails.
They use personal or other domains.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This change introduces a new libvirt sub-element <pci> under
<features> that can be used to configure all pci related features.
Currently the only sub-sub element supported by this sub-element is
'acpi-bridge-hotplug' as shown below:
<features>
<pci>
<acpi-bridge-hotplug state='on|off'/>
</pci>
</features>
The above option is only available for the QEMU driver, for x86 guests
only. It is a global option, affecting all PCI bridge controllers on
the guest.
The 'acpi-bridge-hotplug' option enables or disables ACPI hotplug
support for cold-plugged pci bridges. Examples of bridges include the
PCI-PCI bridge (pci-bridge controller) for pc (i440fx) machinetypes,
or PCIe-PCI bridges and pcie-root-port controllers for q35
machinetypes.
For pc machinetypes in x86, this option has been available in QEMU
since version 2.1. Please see the following changes in qemu repo:
9e047b982452c6 ("piix4: add acpi pci hotplug support")
133a2da488062e ("pc: acpi: generate AML only for PCI0 devices if PCI
bridge hotplug is disabled")
For q35 machinetypes, this was introduced in QEMU 6.1 with the
following changes in qemu repo:
(a) c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
(b) 17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on
Q35")
The reasons for enabling ACPI based hotplug for PCIe (q35) based
machines (as opposed to native hotplug) are outlined in (b). There are
use cases where users would still want to use native
hotplug. Therefore, this config option enables users to choose either
ACPI based hotplug or native hotplug for bridges (for example for pcie
root port controller in q35 machines).
Qemu capability validation checks have also been added along with
related unit tests to exercise the new conf option.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces libvirt xml support to enable/disable hotplug on the
pci-root controller. It adds a 'target' subelement for the pci-root controller
with a 'hotplug' property. This property can be used to enable or disable
hotplug for the pci-root controller. For example, in order to disable hotplug
on the pci-root controller, one has to use set '<target hotplug='off'>' as
shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='on'>' option would enable hotplug for pci-root controller.
This is also the default value. This option is only available for pc machine
types and is applicable for qemu/kvm accelerator only.This feature was
introduced from qemu version 5.2 with the following change in qemu repository:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The above qemu commit describes some reasons why users might to disable hotplug
on PCI root buses.
Related unit tests to exercise the new conf option has also been added.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This commit adds new memorydevices.rst page which should serve
all models of memory devices. Yet, I'm documenting virtio-mem
quirks only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem has another property that isn't exposed yet:
current size exposed to the guest. Please note, that this is
different to <requested/> because esp. on sizing the memory
down guest may refuse to release some blocks. Therefore, let's
have another size to report in the XML. But because of its
nature, the <current/> won't be parsed and is report only (for
live XMLs).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:
1) block-size, which defines the size of a block
2) requested-size, which defines how much memory (in bytes)
is the device requested to expose to the guest.
The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'current' and it is dealt with in future
commits (it is a runtime information anyway).
In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.
Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:
<memory model='virtio-mem'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>2048</pagesize>
</source>
<target>
<size unit='KiB'>2097152</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memory>
I hope by now it is obvious that:
1) 'requested-size' must be an integer multiple of
'block-size', and
2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
address.
Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The value of zero is valid <unique_id/> (see
virNodeDeviceGetSCSIHostCaps()) but our RNG does not think so.
Switching the type to 'unsignedInt' does allow value of zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A nodedev can have 'scsi_generic' capabilities but corresponding
RNG is missing. Fortunately, it's very simple - there's only one
mandatory child element <char/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <type/> element for <capability type='scsi'> part of nodedev
XML is optional (see udevProcessSCSIDevice()) and as such might
not be formatted into nodedev XML (see
virNodeDeviceCapSCSIDefFormat()). Reflect this in our RNG.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option "queue-size" for virtio-blk was added in qemu-2.12.0, and
default value increased from qemu-5.0.0.
However, increasing this value may lead to drop of random access
performance.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add up-to-date information about creating and defining mediated devices
in libvirt.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Bring the documentation for nodedev-list up to date with the latest
code, especially documenting the --active and -all options.
Also add documentation for the nodedev-define, nodedev-undefine, and
nodedev-start commands.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When documenting our public API in some places we use '@' to
refer to the variable. For instance:
* This API tries to set guest time to the given value. The time
* to set (@seconds and @nseconds) should be in seconds relative
* to the Epoch of 1970-01-01 00:00:00 in UTC.
However, when generating HTML documentation these tokens are
copied verbatim. What we can do is drop the '@' character and
wrap the variable in <code/> so that it is formatted properly.
Due to the way we 'parse' docs a token might actually be slightly
more than just '@variable'. For instance in the example above we
will have the following tokens: '(@seconds' and '@nseconds)'.
Thus we need to handle possible substring before and after
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is currently the only way to view the 'autostart' property for a
node device in virsh.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to set node devices to autostart on boot or parent device
availability.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the example for <memory model='dimm'/> we show how to
configure hugepages as backend. In the example we show 4MiB
hugepages which are non-standard and thus at the first glance may
mislead users thinking that a regular sized pages (4K) will be
used. Use 2MiB as the value instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The virtiofs project started off using "virtio-fs" but later switched to
the "virtiofs" spelling because it matches the spelling of the mount -t
virtiofs command-line. Update the kbase article with the new spelling so
it matches the virtiofs website.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A number of legacy issues make the virtiofs kbase article hard to
understand. Most users don't need to configure NUMA or a memory backend
other than memfd. Move that information to the bottom of the article so
the recommended syntax is most prominent.
Suggested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'preserve' action.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'rename-restart' action.
At this point the following handling would take place:
'on_reboot' set to 'rename-restart' is ignored on guest-initiated
reboots, the guest simply reboots.
For on_poweroff set to 'rename-restart' the following happens:
guest initiated shutdown -> 'destroy'
libvirt initiated shutdown -> 'reboot'
In addition when 'on_reboot' is 'destroy' in addition to 'on_poweroff'
being 'rename-restart' the guest is able to execute instructions after
issuing a reset before libvirt terminates it. This will be addressed
separately later.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that it's for internal testing use and remove the manpage entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to error out for empty <partition></partition> element
as we can just simply ignore it. This allows to simplify the function
and prepare it for new sub-elements of <resource>.
It makes the <partition> element optional so we need to reflect the
change in schema as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is the preferred way to do it, but there were a few
instances in which some of the path components had embedded
slashes instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 12967c3e13 incorrectly made the target optional.
The validation was re-introduced by commit e8863b91f (which
put it into FSDefValidate instead of the parser), but
it did not amend the schema to make it mandatory again.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: e8863b91fb
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This function add halt polling time interface in domstats. So that
we can use command 'virsh domstats VM' to get the data if system
support.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adding availability of s390-pv in domain capabilities and adjust tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add documentation for launch security type s390-pv.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Change launch security to make it reusable for other types.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Even though 'id' attribute is output-only, we should accept xml
files containing it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1941594
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enabling core dumps is a reasonably straightforward task, but is not
documented clearly. This page provides as easy link to point users
to when they need to debug QEMU.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to report via domcapabilities if specifying shared memory
is supported without hugepages or numa config in order to find
out if domain has suitable setup to make virtiofs work.
The solution is to report source types of memory backing to
determine if memfd is a valid option.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Turns out, when introducing HMAT support in v6.6.0-rc1~249
I've forgot to allow "cache" attribute for <bandwidth/> element
in RNG. It's parsed and formatted, but schema does not allow it.
Fixes: a89bbbac86
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980162
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gitlab.com repos are the primary source, with libvirt.org just a
read-only mirror.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current information is not accurate, because the default
is 2.0 instead of 1.2 for the tpm-crb and tpm-spapr models.
Any detailed list will surely become obsolete and out of sync
with reality over time, so let's just document that the default
model depends on a number of factors and avoid getting any more
specific than that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I expect to find a link to the repositories when clicking on
"Contribute", this patch fixes this. The wording is directly inspired by
the one on the hacking page.
Signed-off-by: Simon Chopin <chopin.simon@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Links between NUMA nodes can have different latencies and
bandwidths. This info is newly defined in ACPI 6.2 under
Heterogeneous Memory Attribute Table (HMAT) table. Linux kernel
learned how to report these values under sysfs and thus we can
expose them in our capabilities XML. The sysfs interface is
documented in kernel's Documentation/admin-guide/mm/numaperf.rst.
Long story short, two nodes can be in initiator-target
relationship. A node can be initiator if it has a CPU or a device
that's capable of initiating memory transfer. Therefore a node
that has just memory can only be target. An initiator-target link
can then have any combination of {bandwidth, latency} - {access,
read, write} attribute (6 in total). However, the standard says
access is applicable iff read and write values are the same.
Therefore, we really have just four combinations of attributes:
bandwidth-read, bandwidth-write, latency-read, latency-write.
This is the combination that kernel reports anyway.
Then, under /sys/system/devices/node/nodeX/acccessN/initiators we
find values for those 4 attributes and also symlinks named
"nodeN" which then represent initiators to nodeX. For instance:
/sys/system/node/node1/access1/initiators/node0 -> ../../node0
/sys/system/node/node1/access1/initiators/read_bandwidth
/sys/system/node/node1/access1/initiators/read_latency
/sys/system/node/node1/access1/initiators/write_bandwidth
/sys/system/node/node1/access1/initiators/write_latency
This means that node0 is initiator and node1 is target and values
of the interconnect can be read.
In theory, there can be separate links to memory side caches too
(e.g. one link from node X to node Y's main memory, another from
node X to node Y's L1 cache, another one to L2 cache and so on).
But sysfs does not express this relationship just yet.
The "accessN" means either "access0" or "access1". The difference
is that while the former expresses the best interconnect between
two nodes including CPUS and I/O devices (such as GPUs and NICs),
the latter includes only CPUs and thus is what we need.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1786309
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Memory on a NUMA node can have a side caches. Configuring these
for a domain was implemented in v6.6.0-rc1~249 and friends.
However, up until now mgmt applications did not really know what
values to pass because we were not exposing caches of the host.
With recent enough kernel these are exposed under sysfs and with
a bit of parsing we can extend our capabilities XML. The sysfs
structure is documented in kernel's
Documentation/admin-guide/mm/numaperf.rst and basically maps in
1:1 fashion to our virNumaCache structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It may happen that a NUMA node has no CPUs associated with it. We
allow this for domains since v6.6.0-rc1~250. Let's update our
capabilities schema to match that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently we expose libvirt Go packages at
libvirt.org/libvirt-go
libvirt.org/libvirt-go-xml
These packages have not supported Go modules historically and when we
tried to introduce modules, we hit the problem that we're not using
semver for versioning.
The only way around this is to introduce new packages under a different
namespace, that will have the exact same code, but be tagged with a
different version numbering scheme.
This change proposes:
libvirt.org/go/libvirt
libvirt.org/go/libvirtxml
Note the hyphen is removed so that the import basename matches the
Go package name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Disk serials are truncated arbitrarily and silently by qemu depending on
the device type and how they are configured. Since changing the current
state would lead to more regressions than we have now, document that the
truncation is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nowadays memfd is the most convenient memory backend for vhost-user
devices. Compared to file-backend memory and hugepages, there is no need
to worry about configuring the location of the shm directory or
allocating hugepages.
Cc: Michal Prívozník <mprivozn@redhat.com>
Cc: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove some dupicate text and replace in incorrect occurance of
monolithic with modular.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The <audio> element is configuring exclusively a backend, not a device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cd.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a5585499.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the user wants to share the disk image between multiple VMs the
qemu driver needs to hotplug such disks to instantiate the backends.
Since that doesn't work for all disk configs add a switch to force this
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Using slice to cut off the end of the image is a perfectly vaid
configuration. Use 'unsignedInt' instead of 'positiveInteger' for the
'offset' attribute in the XML schema and modify one test case to cover
this use case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After previous patches we have two structures:
virCapsHostNUMACellDistance and virNumaDistance which express the
same thing. And have the exact same members (modulo their names).
Drop the former in favor of the latter.
This change means that distances with value of 0 are no longer
printed out into capabilities XML, because domain XML code allows
partial distance specification and thus threats value of 0 as
unspecified by user (see virDomainNumaGetNodeDistance() which
returns the default LOCAL/REMOTE distance for value of 0).
Also, from ACPI 6.1 specification, section 5.2.17 System Locality
Distance Information Table (SLIT):
Distance values of 0-9 are reserved and have no meaning.
Thus we shouldn't be ever reporting 0 in neither domain nor
capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default value hard-coded in QEMU (64KiB) is not always the ideal.
Having a possibility to set the cluster_size by user may in specific
use-cases improve performance for QCOW2 images.
QEMU internally has some limits, the value has to be between 512B and
2048KiB and must by power of two, except when the image has Extended L2
Entries the minimal value has to be 16KiB.
Since qemu-img ensures the value is correct and the limit is not always
the same libvirt will not duplicate any of these checks as the error
message from qemu-img is good enough:
Cluster size must be a power of two between 512 and 2048k
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/154
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new element to the mdev capabilities xml schema that
represents the start policy for a defined mediated device. The actual
auto-start functionality is handled behind the scenes by mdevctl, but it
wasn't yet hooked up in libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a rewrite of:
https://wiki.libvirt.org/page/Live-disk-backup-with-active-blockcommit
Once this commit merges, the above wiki should point to this kbase
document.
NB: I've intentionally left out the example for pull-based full backups.
I'll tackle it once QMP `x-blockdev-reopen` comes out of experimental
mode in upstream QEMU. Then pull-based can be described for both full
and and differntial backups.
Overall, future documents should cover:
- full backups using both push- and pull-mode
- differential backups using both push- and pull-mode
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 68c5b6fb2b libxl also handles
a domain/cputune/vcpupin element in domU.xml.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
As of May 7 2021, rhel-8 will be out for two years, which means we no
longer have to support rhel-7 ancient qemu.
QEMU versions in our supported distros:
RHEL-8: 2.12
Debian Stable: 3.1
OpenSuse LEAP 15.0 (SLES15 GA): 2.11
OpenSuse LEAP 15.2: 4.2
Ubuntu (Bionic): 2.11
Ubuntu (Focal): 4.2
This means we can bring up the minimum supported version to 2.11.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Provide an exmple in a place more visible than formatdomain.html.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
It's now empty, so no point in keeping it around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
