Some users might want to have virtio-pmem backed by a block device
in which case we have to create the device in the domain private
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some users might want to have virtio-pmem backed by a block
device in which case we have to allow the device in CGroups.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Just like with NVDIMM model, we have to relabel the path to
virtio-pmem so that QEMU can access it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit introduces a new capability that reflects virtio-pmem-pci
device support in qemu:
QEMU_CAPS_DEVICE_VIRTIO_PMEM_PCI, /* -device virtio-pmem-pci */
The virtio-pmem-pci device was introduced in QEMU 4.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In the past, the MTU of libvirt virtual network bridge devices was
implicitly set by setting the MTU of the "dummy tap device" (which was
being added in order to force a particular MAC address from the
bridge). But the dummy tap device was removed in commit ee6c936fbb
(libvirt-6.8.0), and so the mtu setting in the network is ignored.
The solution is, of course, to explicitly set the bridge device MTU
when it is created.
Note that any guest interface with a larger MTU that is attached will
cause the bridge to (temporarily) assume the larger MTU, but it will
revert to the bridge's own MTU when that device is deleted (this is
not due to anything libvirt does; it's just how Linux host bridges
work).
Fixes: ee6c936fbb
Resolves: https://bugzilla.redhat.com/1913561
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
managed='no' on an <interface> allows an unprivileged libvirt to use a
pre-created tap/macvtap device that libvirt has permission to
open/read/write, but no permission to modify (i.e. set the MTU or MAC
address). But when the XML had an <mtu size='blah'/> setting (which
was put there in order to tell the *guest* OS what MTU to set for the
emulated device at the other end of the tap) we were attempting to set
the MTU of the tap device on the host, paying no attention to the
setting of 'managed'. That would of course end in failure.
This patch only sets the MTU if managed='no' is *not* set (so, if it
is 'yes', or just not set at all).
Note that MTU of the tap is also set when connecting the tap to a
bridge device, but managed='no' is only allowed for <interface
type='ethernet'>, which would never attach to a bridge anyway, so we
don't need the check there.
Resolves: https://bugzilla.redhat.com/1905929
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Extract common code as helper function virNetlinkTalk, then simplify
the functions virNetlink[DumpLink|NewLink|DelLink|GetNeighbor].
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a macro NETLINK_MSG_APPEND to wrap nlmsg_append and
simplify code. Remove those labels 'buffer_too_small', since they
are now useless.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move macros NETLINK_MSG_[NEST_START|NEST_END|PUT] from .h into .c;
within these macros, replace 'goto' with reporting error and returning;
simplify virNetlinkDumpLink and virNetlinkDelLink by using NETLINK_MSG_PUT.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
NLM_F_CREATE and NLM_F_EXCL are invalid for RTM_DELLINK,
so remove them.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.
Add parsing, formatting and tests for <metadata_cache> for a <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Depending on the memballoon model, the corresponding QOM node
will have a different type and we need to account for this
when searching for it in the QOM tree.
https://bugzilla.redhat.com/show_bug.cgi?id=1911786
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a block job is terminated we should clear the 'mirrorState' and
'mirrorJob' variables so that stale values are not present prior to a
new job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the per-job state to determine when the non-shared-storage mirror is
complete rather than the per-disk definition one. The qemuBlockJobData
is a newer approach and is always cleared after the blockjob is
terminated while the 'mirrorState' variable in the definition of the
disk may be left over. In such case the disk mirror would be considered
complete prematurely.
https://bugzilla.redhat.com/show_bug.cgi?id=1889131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we assumed that any vhostuser interface is plugged into an
OVS bridge and thus 'ovs-vsctl' exists. But this is not always
true. In testing scenarios it is possible to create a vhostuser
interface with this tool dpdk-testpmd (part of dpdk RPM) which
creates/connects to UNIX socket needed for vhostuser. Of course,
since there is no OVS then there is no interface name in which
case virNetDevOpenvswitchGetVhostuserIfname() should return 0.
The rest of APIs that assume OVS are not 'fixed' because we still
want them to fail (e.g. getting statistics, plugging interface
into an OVS bridge, unplugging it from an OVS bridge, ...).
The only API that is fixed is
virNetDevOpenvswitchGetVhostuserIfname() because it is called
explicitly when starting a guest (and callers are okay if no name
was found).
The other way to fix this bug seems to be to simply require
'ovs-vsctl' on spec file level, but that is too heavy gun given
that vhostuser is used by a small set of our users (assumption
made on requirements for vhostuser). Also, this way would drag in
yet another dependency for all users (even those who want minimal
libvirt).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1913156
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that this function can be called regardless of interface type (and
whether or not we have a conn for the network driver), let's actually
call it for all interface types. This will assure that we re-connect
any disconnected bridge devices for <interface type='bridge'> as
mentioned in https://bugzilla.redhat.com/show_bug.cgi?id=1730084#c26
(until now we've only been reconnecting bridge devices for <interface
type='network'>)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bridge reattach functionality in this function should be called
for interface types other than just type='network', so make it
callable for any type - it just becomes a NOP for types where no
action is needed.
In the case of <interface type='network'> we need to create a port in
the network driver, and for both type='network and type='bridge' we
need to reattach the bridge device (note that
virDomainNetGetActualBridgeName() gets the bridge name from the
appropriate (and different!) location for either type of interface).
All other interfaces currently require no action.
modifying callers of this function to actually call it for all
interface types is in the next patch. For now the behavior should be
identical pre and post-patch.
(NB: the conn argument can now legitimately be NULL, so we need to
change the ATTRIBUTE_NONNULL() directive for the function's
declaration - I noticed when making this change that argument 3 (the
NetDefPtr) could never be NULL, so I added ATTRIBUTE_NONNULL(3) while
removing ATTRIBUTE_NONNULL(1) (conn)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>Reviewed-by: Michal Privoznik <mprivozn@redhat.com>#Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dnsmasq usually prints out a version string like this:
Dnsmasq version 2.82 [...]
but a user reported that the build of dnsmasq included with pihole has
a version string like this:
Dnsmasq version pi-hole-2.81 [...]
We parse the dnsmasq version number to figure out if the dnsmasq
binary supports certain features. Since we expect the version number
(and it must be only numbers!) to start on the first non-space after
the string "Dnsmasq version", we fail to parse this format of the
version string.
Rather than spending a bunch of time trying to get pihole to change
that, we can just make our parsing more permissive - after searching
for "Dnsmasq version", we'll skip ahead to the first decimal digit,
rather than just the first non-space.
(NB: The features we're checking for purely by looking at version
number have been in all releases of dnsmasq since at least 2012, so we
could actually just remove the reading of the version number
completely. However it's possible (although *highly* unlikely)
that some new feature would be added to dnsmasq in the future and we
would need to add that code back.)
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/29
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function skips over the beginning of a string until it reaches a
decimal digit (0-9) or the NULL at the end of the string. The original
pointer is modified in place (similar to virSkipSpaces()).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu's qcow2 driver allows control of the metadata cache of qcow2 driver
by the 'cache-size' property. Wire it up to the recently introduced
elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the domain config code it may be beneficial to control the
cache size of images introduced as snapshots into the backing chain.
Wire up handling of the 'metadata_cache' element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify the code with other places using virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable parsing of backing store strings containing the native 'nfs'
protocol specification.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement support for the 'nfs' native protocol driver in the qemu
driver.
QEMU accepts numeric UID/GID for 'nfs' protocol file driver thus libvirt
needs to perform the lookup prior to passing it to qemu.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'nfs_user'/'nfs_group' represents the XML configuration.
'nfs_uid'/'nfs_gid' is internal store when libvirt looks up the user's
uid/gid in the system.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Get rid of the 'cleanup' label and 'created' variable.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It is now doing way more than gathering the CPU data from a host as the
other scripts were merged in it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
cpu-cpuid.py was merged into cpu-gather.py and the script can handle
multiple files so there's no need for a loop around it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use one variable per extracted property instead of reusing strings and
drop needless VIR_FREE calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to startup of the VM qemu doesn't like setting throttling for
an empty drive. Just skip it since we do the correct thing once new
media is inserted.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/117
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
The monitor code uses 'flags' for the flags of the monitor builder,
while in this function it's a different set of flags. All callers pass a
variable named 'cdevflags', so rename the argument to suit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virJSONValueObjectRemoveKey can be used as direct replacement. Fix the
one caller and remove the duplicate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove freeing/clearing of @props as the function doesn't guarantee that
it happens on success, rename the variable hodling copy of the alias and
use g_autofree to automatically free it and remove the cleanup label as
well as 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers of qemuMonitorAddObject rely on the fact that @alias is
filled only when the object is added successfully. This is documented
but the code didn't behave like that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers of qemuMonitorJSONMakeCommandInternal will benefit from
making @arguments a double pointer and passing it to
virJSONValueObjectCreate directly which will clear it if it steals the
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prepare for a refactor of qemuMonitorJSONMakeCommandInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the 'cleanup' label and 'ret'
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows simplification of the caller as well as will enable a later
refactor of qemuMonitorJSONMakeCommandInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The lookup didn't do anything apart from comparing the sysfs paths
anyway since that's what makes each mdev unique.
The most ridiculous usage of the old logic was in
virHostdevReAttachMediatedDevices where in order to drop an mdev
hostdev from the list of active devices we first had to create a new
mdev and use it in the lookup call. Why couldn't we have used the
hostdev directly? Because the hostdev and mdev structures are
incompatible.
The way mdevs are currently removed is via a write to a specific sysfs
attribute. If you do it while the machine which has the mdev assigned
is running, the write call may block (with a new enough kernel, with
older kernels it would return a write error!) until the device
is no longer in use which is when the QEMU process exits.
The interesting part here comes afterwards when we're cleaning up and
call virHostdevReAttachMediatedDevices. The domain doesn't exist
anymore, so the list of active hostdevs needs to be updated and the
respective hostdevs removed from the list, but remember we had to
create an mdev object in the memory in order to find it in the list
first which will fail because the write to sysfs had already removed
the mdev instance from the host system.
And so the next time you try to start the same domain you'll get:
"Requested operation is not valid: mediated device <path> is in use by
driver QEMU, domain <name>"
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/119
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We set the pointer to some garbage packed structure data without
knowing whether we were actually handling the type of device we
expected to be handling. On its own, this was harmless, because we'd
never use the pointer as we'd skip the device if it were not the
expected type. However, it's better to make the logic even more
explicit - we first check the device and only when we're sure we have
the expected type we then update the pointer shortcut.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDeviceHasPCIExpressLink() wasn't checking that pcie_cap_pos was
valid before attempting to use it, which could lead to reading the
byte at offset 0 + PCI_CAP_ID_EXP instead of [valid offset] +
PCI_CAP_ID_EXP. In particular, this could happen for "integrated" PCI
devices (those that are on the PCIe root complex). If it happened that
the byte from the wrong address had the "right" bit set, then it would
lead to us innappropriately believing that Express Link info was
available when it wasn't, and the node device driver would then log an
error like this:
virPCIDeviceGetLinkCapSta:2754 :
internal error: pci device 0000:00:18.0 is not a PCI-Express device
during a libvirtd restart. (this didn't ever occur until after
virPCIDeviceIsPCIExpress() was made more intelligent in commit
c00b6b1ae, which hasn't yet been in any official release)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The two scenarios were found by Coverity after a seemingly-unrelated
change to virLXCProcessSetupInterfaceTap() (in commit ecfc2d5f43), and
explained by John Ferlan here:
https://www.redhat.com/archives/libvir-list/2020-December/msg00810.html
To re-explain:
a) On entry to virLXCProcessSetupInterfaceTap() if net->ifname != NULL
then a copy of net->ifname is made into parentVeth, and a reference
to *that* pointer is sent down to virNetDevVethCreate().
b) If parentVeth (aka net->ifname) is a template name (e.g. "blah%d"),
then virNetDevVethCreate() calls virNetDevGenerateName(), and if
virNetDevGenerateName() successfully generates a usable name
(e.g. "blah27") then it will free the original template string
(which is pointed to by net->ifname and by parentVeth), then
replace the pointer in parentVeth with a pointer to the new
string. Note that net->ifname still points to the now-freed
template string.
c) returning back up to virLXCProcessSetupInterfaceTap(), we check if
net->ifname == NULL - it *isn't* (still contains stale pointer to
template string), so we don't replace it with the pointer to the new
string that is in parentVeth.
d) Result: the new string is leaked once we return from
virLXCProcessSetupInterfaceTap(), while there is a dangling pointer
to the old string in net->ifname.
There is also a leak if there is a failure somewhere between steps (b)
and (c) above - the failure cleanup in virNetDevVethCreate() will only
free the newly-generated parentVeth string if the original pointer was
NULL (narrator: "It wasn't."). But it's a new string allocated by
virNetDevGenerateName(), not the original string from net->ifname, so
it really does need to be freed.
The solution is to make a copy of the entire original string into a
g_autofree pointer, then iff everything is successful we g_free() the
original net->ifname and replace it by stealing the string returned by
virNetDevVethCreate().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In all cases *except* when parsing status XML as libvirt is being
restarted, the XML parser will delete any manually specified interface
name (aka "<target dev='blah'/>" aka net->ifname) that could have been
generated by virNetDevGenerateName(). This means that during the setup
when a domain is being started (e.g. during
virLXCProcessSetupInterfaceTap()) it is pointless to call
virNetDevReserveName() with any setting of net->ifname that has come
from the XML parser - it is guaranteed to not fit the pattern of any
auto-generated name, and so the call is just a NOP anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to missing pdpe1gb support in the host CPU data, the CPU is still
incorrectly detected as Westmere-IBRS for host capabilities because we
don't have the option to disable features included in the base model
there.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When defining/creating a network the bridge name may be filled in
automatically by libvirt (if none provided in the input XML or
the one provided is a pattern, e.g. "virbr%d"). During the
bridge name generation process a candidate name is generated
which is then checked with the rest of already defined/running
networks for collisions.
Problem is, that there is no mutex guarding this critical section
and thus if two threads line up so that they both generate the
same candidate they won't find any collision and the same name is
then stored.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/78
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The @fds member of qemuMonitorFdsetInfo struct is an array and as
such, it's allocated in qemuMonitorJSONQueryFdsetsParse() but not
freed in qemuMonitorFdsetsFree().
Fixes: b8998cc670
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
@tmp that was copied just above is leaked on plain return.
The issue is found by Coverity.
Patch that inroduced a leak:
d4439a6b8 : src: adopt to VIR_DRV_SUPPORTS_FEATURE return -1
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes compiler error:
src/qemu/qemu_migration.c:4814:20: error: ‘dstOffline’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
4814 | if (offline && !dstOffline) {
The commit that introduced the error:
910b94df: qemu: adopt to VIR_DRV_SUPPORTS_FEATURE return -1
Signed-off-by: Nick Shyrokovskiy <nshyrokovskiy@gmail.com>
Changes to a virtio network device such as
<interface type="network">
<model type="virtio"/>
<driver iommu="on" ats="on"/> <!-- this line added -->
...
</interface>
were quietly dismissed by `virsh update-device ... --live`.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise we can get misleading error messages. One example is when connection
is broken we got "this function is not supported by the connection driver:
virDomainMigrate3" from virDomainMigrate3.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When an interface has some bandwidth limitation set (it's root
qdisc is htb in that case) but this gets cleared out via public
API call (virDomainSetInterfaceParameters() or
virDomainUpdateDeviceFlags()) then virNetDevBandwidthSet() clears
out whatever qdiscs were set on the interface and kernel places
the default qdisc at the root. What we need to do next is to
replace the root qdisc with the one we want.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Fixes: 0b66196d86
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the code that's setting default qdisc is clever enough to
not overwrite any bandwidth (potentially) set by
virNetDevBandwidthSet() (and thus the root qdisc htb is not
replaced with noqueue), it does print a debug message when that's
the case. It's needless. We can set the root qdisc beforehand and
let virNetDevBandwidthSet() overwrite it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some secdrivers (typically SELinux driver) generate unique
dynamic seclabel for each domain (unless a static one is
requested in domain XML). This is achieved by calling
qemuSecurityGenLabel() from qemuProcessPrepareDomain() which
allocates unique seclabel and stores it in domain def->seclabels.
The counterpart is qemuSecurityReleaseLabel() which releases the
label and removes it from def->seclabels. Problem is, that with
current code the qemuProcessStop() may still want to use the
seclabel after it was released, e.g. when it wants to restore the
label of a disk mirror.
What is happening now, is that in qemuProcessStop() the
qemuSecurityReleaseLabel() is called, which removes the SELinux
seclabel from def->seclabels, yada yada yada and eventually
qemuSecurityRestoreImageLabel() is called. This bubbles down to
virSecuritySELinuxRestoreImageLabelSingle() which find no SELinux
seclabel (using virDomainDefGetSecurityLabelDef()) and this
returns early doing nothing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1751664
Fixes: 8fa0374c5b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The only reason why virstoragefile.h needs to be included in virfile.h
is that virFileNBDDeviceAssociate() takes virStorageFileFormat argument.
The function doesn't need the enum value as it converts the value to
string and uses only that.
Change the argument to string which will allow us to remove that
include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function doesn't take virStorageSource as argument and has nothing
in common with virStorageSource or storage file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function virQEMUBuildQemuImgKeySecretOpts is not used anywhere else
so there is no need to have it in util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last usage outside of tests was removed by commit
<780f8c94ca8b3dee7eb59c1bfbc32f672f965df8>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last user was removed by commit
<40f0e0348dfc84f28a500e262c4953b0d3b44fa0>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The kernel refuses to set guest TSC frequency less than a minimum
frequency or greater than maximum frequency (both computed based on the
host TSC frequency). When writing the libvirt code with a reversed logic
(return success when the requested frequency falls within the tolerance
interval) I forgot to include the boundaries.
Fixes: d8e5b45600https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactor in 0316c28a45 used incorrect source variable to initialize
the variable which holds the name of the bitmap which needs to be
deleted after the backup job finishes. This resulted into deleting the
source bitmap of the backup rather than the temporary one.
Use 'dd->incrementalBitmap' which holds the temporary bitmap name
instead of 'dd->backupdisk->incremental' which holds the name of the
source bitmap which is used by the backup.
Fixes: 0316c28a45
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908647
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM with an empty cdrom which has <iotune> configured the
startup fails as qemu is not happy about setting tuning for an empty
drive:
error: internal error: unable to execute 'block_set_io_throttle', unexpected error: 'Device has no medium'
Resolve this by skipping the setting of throttling for empty drives and
updating the throttling when new medium is inserted into the drive.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/111
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is perfectly valid in VMWare and the VM just boots with an empty drive. We
used to just skip the whole drive before, but since we changed how we parse
empty cdrom drives this results in an error. Make it behave more closer to
VMWare.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1903953
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
And return the actual extracted value in a parameter. This way we can later
return success even without any extracted value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The positive branch can just return and the huge negative part does not need to
be indented an extra level. Best viewed with `-w`.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Remove @ret and @created variables which are not needed really.
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the callers care about errno really. The errno will be
reported by virReportSystemError().
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The caller doesn't care about errno really. The errno will be
reported by virReportSystemError().
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we configure QEMU to prealloc memory almost by
default. Well, by default for NVDIMMs, hugepages and if user
asked us to (via memoryBacking <allocation mode="immediate"/>).
However, when guest's NVDIMM is backed by real life NVDIMM this
approach is not the best. In this case users should put <pmem/>
into the <memory/> device <source/>, like this:
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/pmem0</path>
<pmem/>
</source>
</memory>
Instructing QEMU to do prealloc in this case means that each
page of the NVDIMM is "touched" (the first byte is read and
written back - see QEMU commit v2.9.0-rc1~26^2) which cripples
device wear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1894053
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When rewriting the function, I've mistakenly declared a variable
and assigned it to itself. Let's initialize the variable properly.
Fixes: 5fb6d98c88
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are a few places where we open code virStrcpy() or
virStrcpyStatic(). Call respective functions instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virSecurityLabelDefParseXML() we are parsing the <seclabel/>
element among with its attributes. Some of the attributes are
limited in length (because of virNodeGetSecurityModel()), however
some are not. And for the latter ones we don't need to use
virXMLPropStringLimit() to parse them. Moreover, using
VIR_SECURITY_LABEL_BUFLEN as the limit is wrong - we are not
storing the parsed strings into a static buffer of that size
rather than checking if the string passes string -> enum
conversion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While previously we returned 0 this is not correct. We have to
return a negative value to indicate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though we are getting driver capabilities with
refresh=false (so that it is not expensive), we still should do
ACL check first because there is no point in bothering with the
capabilities if caller doesn't have permissions to call the API.
Also, this way the comment makes more sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code we have there to copy seclabel model or doi can be
replaced by virStrcpy() calls which do exactly the same checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After v6.3.0-rc1~64 a lease can have infinite expiry time. This
means that the expiration time will appear as a value of zero.
Do the expiration check only if the expiration time is not zero.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908053
Fixes: 97a0aa2467
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, bring variables that are used only within loops into
their respective loops. Secondly, drop 'error' label which is
redundant since we have @rv which holds the return value.
Thirdly, fix indendation in one case, the rest is indented
properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function is misusing VIR_INSERT_ELEMENT() to behave like
VIR_APPEND_ELEMENT(). Use the latter to make it explicit what we
are trying to achieve.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need to track the lease file size. Instead, we can
simply check if the file was empty by comparing the buffer the
file was read into with an empty string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When adding a new lease by our leaseshelper then virLeaseNew() is
called. Here, we check for DNSMASQ_LEASE_EXPIRES environment
variable which is the expiration time for the lease. For infinite
lease time the value is zero. However, our code is not prepared
for that and adds "expiry-time" into the JSON file only if lease
expiry time is non-zero. This breaks the assumption that the
"expiry-time" attribute is always present (as can be seen in
virLeaseReadCustomLeaseFile() and virLeasePrintLeases()).
Store "expiry-time" always.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In virLeaseNew() we are trying to remove trailing space (per
comment it may happen that older versions of dnsmasq put it into
an env variable). Well, instead of open coding it, we can use
virTrimSpaces().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are some variables which are used only inside the single
loop the function has. Let's declare them inside the loop body to
make that obvious. Also, fix indendation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If leasehelper fails all that we are left with is a simple error
message produced by dnsmasq:
lease-init script returned exit code 1
This is because the leasehelper did not write any message to
stderr. According to dnsmasq's manpage, whenever it's invoking
leasehelper the stderr is kept open:
All file descriptors are closed except stdin, which is open to
/dev/null, and stdout and stderr which capture output for
logging by dnsmasq.
As debugging leasehelper is not trivial (because dnsmasq invokes
it with plenty of env vars set - that's how data is passed onto
helper), let's print an error into stderr if exiting with an
error. And since we are not calling public APIs, we have to call
virDispatchError() explicitly and since we don't have any
connection open, we have to pass NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In recent patches new mambers to _qemuAgentDiskAddress struct
were introduced to keep optional CCW address sent by the guest
agent. These two members are a struct to store CCW address into
and a boolean to keep track whether the CCW address is valid.
Well, we can hold the same information with a pointer - instead
of storing the CCW address structure let's keep just a pointer to
it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
On s390x, devices are attached to the channel IO subsytem by default,
so we need to look up scsi controllers via their CCW address there
instead of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-scsi devices (the first
attempt from commit f8333b3b0a did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On s390x, devices are accessed via the channel subsystem by default,
so we need to look up the devices via their CCW address there instead
of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-block devices (the first
attempt from commit f8333b3b0a did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Newer versions of the QEMU guest agent will provide the CCW address
of devices on s390x. Store this information in the qemuAgentDiskInfo
so that we can use this later.
We also map the CSSID 0 from the guest to the value 0xfe on the host,
see https://www.qemu.org/docs/master/system/s390x/css.html for details.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our parser code relies on the fact that
VIR_LXC_DOMAIN_NAMESPACE_SOURCE_NONE has value of zero and thus
uses g_new0(). But strictly speaking, this is not mandated by
the enum typedef. Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
While fixing our schema for <lxc:namespace/> I've looked into the
parser and realized it could use some treating.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
As all other free functions, NULL should be accepted. Even though
there currently is no caller that would pass NULL, there will be
in future patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
During testing of my patch v6.10.0-rc1~221 it was found that
'ovs-vsctl get Interface $name name' or
'ovs-vsctl find Interface options:vhost-server-path=$path'
may return a string in double quotes, e.g. "vhost-user1". Later
investigation of openvswitch code showed, that early versions
(like 1.3.0) have somewhat restrictive set of safe characters
(isalpha() || '_' || '-' || '.'), which is then refined with
increasing version. For instance, version 2.11.4 has: isalnum()
|| '_' || '-' || '.'. If the string that ovs-vsctl wants to
output contains any other character it is escaped. You want to be
looking at ovsdb_atom_to_string() which handles outputting of a
single string and calls string_needs_quotes() and possibly
json_serialize_string() in openvswitch code base.
Since the interfaces are usually named "vhost-userN" we are
facing a problem where with one version we get the name in double
quotes and with another we get plain name without funny business.
Because of json involved I thought, let's make ovs-vsctl output
into JSON format and then use our JSON parser, but guess what -
ovs-vsctl ignores --format=json. But with a little help of
g_strdup_printf() it can be turned into JSON.
Fixes: e4c29e2904
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In v6.10.0-rc1~221 I wanted to make virNetDevOpenvswitchGetVhostuserIfname()
lookup interface name even for vhostuser interfaces with mode='server'. For
these, we are given a socket path which is then created by QEMU and to which
OpenVSwitch connects to and creates an interface. Because of this, we don't
know the name of the interface upfront (when starting QEMU) and have to use
the path to query OpenVSwitch later (using ovs-vsctl). What I intended to use
was:
ovs-vsctl --no-headings --columns=name find Interface options:vhost-server-path=$path
But what my code does is:
ovs-vsctl --no-headings --columns=name find Interface options:vhost-server-path=path
and it's all because the argument to the function is named "path"
which I then enclosed in double quotes while it should have been
used as a variable.
Fixes: e4c29e2904
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
the lxc driver uses virNetDevGenerateName() for its veth device names
since patch 2dd0fb492, so it should be using virNetDevReserveName()
during daemon restart/reconnect to skip over the device names that are
in use.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The comment about auto-generating names was obsoleted by recent
changes, and there was an unnecessary set of braces around a single
line conditional body.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 282d135ddb the parser for <interface> has cleared out
any interface name from the input XML that used the macvtap/macvlan
name as a prefix. Along with that, the switch to use the new
virNetDevGenerateName() function for auto-generating macvtap/macvlan
device names (commit 9b5d741a9), has realized two facts:
1) virNetDevGenerateName() can be called with a name already filled
in, and in that case it is an effective NOP.
2) because virNetDevGenerate() will always find an unused name, there
is no need to retry device creation in a loop - if it fails the
first time, it would fail any subsequent time as well.
that, combined with the aforementioned parser change allow us to
simplify virNetDevMacVLanCreateWithVPortProfile() - we no longer need
any extra code to determine if a template "AutoName" was requested,
and don't need a separate code path for creating the device in the
case that a specific name was given in the XML - all we need to do is
log any requested name, and then call exactly the same code as we
would if no name was given.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The lower level function virNetDevGenerateName() now understands that
a blank ifname should be replaced with a generated name based on a
template that it knows about itself - there is no need for the higher
level functions to stuff a template name ("vnet%d") into ifname.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The FreeBSD version of virNetDevTapCreate() now calls
virNetDevGenerateName(), and virNetDevGenerateName() understands that
a blank ifname should be replaced with a generated name based on a
device-type-specific template - so there is no longer any need for the
higher level functions to stuff a template name ("vnet%d") into
ifname.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Linux implementation of virNetDevCreate() doesn't require a
template ifname (e.g. "vnet%d") when it is called, but just generates
a new name if ifname is empty. The FreeBSD implementation requires
that the caller actually fill in a template ifname, and will fail if
ifname is empty. Since we want to eliminate all the special code in
callers that is setting the template name, we need to make the
behavior of the FreeBSD virNetDevCreate() match the behavior of the
Linux virNetDevCreate().
The simplest way to do this is to use the new virNetDevGenerateName()
function - if ifname is empty it generates a new name with the proper
prefix, and if it's not empty, it leaves it alone.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In virLXCProcessSetupInterfaceTap, containerVeth needs to be freed on
failure.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When netlink is supported, use netlink to create veth device pair
rather than 'ip link' command.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
It must be used when migration URI uses `unix:` transport because otherwise we
cannot just guess where to connect for disk migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Simplify virNetDevVethCreate by using common GenerateName/ReserveName
functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify ReserveName/GenerateName for macvlan and macvtap by using
common functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify GenerateName/ReserveName for netdevtap by using common
functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Extract ReserveName/GenerateName from netdevtap and netdevmacvlan as
common helper functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Commit 729a06c41 added code to the LXC driver (patterned after similar
code in the QEMU driver) that called
virNetDevMacVlanReserveName(net->ifname) for all type='direct'
interfaces during a libvirtd restart, to prevent other domains from
attempting to use a macvtap device name that was already in use by a
domain.
But, unlike a QEMU domain, when an LXC domain creates a macvtap
device, that device is almost immediately moved into the namespace of
the container (and it's then renamed, but that part isn't
important). Because of this, the LXC driver doesn't keep track (in
net->ifname) of the name used to create the device (as the QEMU driver
does).
The result of this is that if libvirtd is restarted while there is an
active LXC domain that has <interface type='direct'>, libvirtd will
segfault (since virNetDevMacVLanReserveName() doesn't check for a NULL
pointer).
The fix is to just not call that function in the case of the LXC
driver, since it is pointless anyway.
Fixes: 729a06c41a
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In v6.8.0-27-g88957116c9 and friends I've switched the way the
default RAM is specified for QEMU (from plain -m to
memory-backend-*). This means, that even if a guest doesn't have
any NUMA nodes configured we can use memory-backend-* attributes
to translate user config requests. For instance, we can allow
memory to be shared (<access mode='shared'/> under
<memoryBacking/>). But what my original commits are missing is
allowing such configuration in our validator.
Fixes: 88957116c9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839034#c12
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some functions in domain_validate.c are throwing VIR_ERR_XML_ERROR,
when in reality none of these errors are exclusive to XML parsing.
Change to VIR_ERR_CONFIG_UNSUPPORTED to be more adequate.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All other validations from virDomainDefValidateInternal() are done
in their own functions. Take IOMMU validation out of the function
body and into its own function.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the move from the previous patch, these functions are now all
used in domain_validate.c and doesn't need to be public.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moving all remaining static helpers of virDomainDeviceDefValidateInternal()
will allow the next patch to move the function itself, and
virDomainDeviceDefValidate(), to domain_validate.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The next objective is to move virDomainDeviceDefValidate() to
domain_validate.c. First let's move all the static helpers.
The net device validation functions are used across multiple
drivers, so let's move them separately first.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virDomainDefValidateInternal() helpers can now be made static again
since they're all in the same file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move virDomainDeviceDefValidate() and all its helper functions to
domain_validate.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patches moves the remaining static functions that
virDomainDefValidateInternal() uses to domain_validate.c. This
allows the next patch to move virDomainDefValidateInternal(),
and virDomainDefValidate(), without too much hassle.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virDomainDefValidateAliases() is one of the static functions that
needs to be handled before moving virDomainDefValidateInternal().
Let's move all related validate functions to domain_validate.c
at the same time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will move virDomainDefValidateAliases() to domain_validate.c,
which uses virDomainDeviceInfoIterateInternal(), meaning that this
function will be made public. Rename it now to remove the 'Internal'
of its name.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virDomainDefCheckDuplicateDiskInfo() and virDomainDefCheckDuplicateDriveAddresses()
are static functions used by virDomainDefValidateInternal(). Let's
move them to domain_validate.c to start clearing up the path to
move virDomainDefValidateInternal().
Change the functions name slightly to be more on par with their
new home.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
With commit 09364608b4 node_device: refactor address retrieval of node device
"if-else if" was replaced by "switch".
The contained break statement now is no longer in context of the for loop
but instead of the switch causing the legitimate grumpiness of coverity.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that virPCIDeviceIsPCIExpress() checks the length of the file when
the process lacks sufficient privilege to read the entire PCI config
file in sysfs, we can remove the open-coding for that case from its
consumer.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Until now there has been an extra bit of code in
qemuDomainDeviceCalculatePCIConnectFlag() (one of the two callers of
virPCIDeviceIsPCIExpress()) that tries to determine if a device is
PCIe by looking at the *length* of its sysfs config file; it only does
this when libvirt is running as a non-root process.
This patch takes advantage of our newfound ability to tell the
difference between "I read a 0 from the device PCI config file" and "I
couldn't read the PCI Express Capabilities because I don't have
sufficient permission" to put the file length check down in
virPCIDeviceIsPCIExpress(), and do that check any time we fail while
reading the config file (not only when the process is non-root).
Fixes: https://bugzilla.redhat.com/1901685
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously there was no way to differentiate between this function 1)
encountering an error while reading the pci config, and 2) determining
that the device in question is a conventional PCI device, and so has
no Express Capabilities.
The difference between these two conditions is important, because an
unprivileged libvirtd will be unable to read all of the pci config (it
can only read the first 64 bytes, and will get ENOENT when it tries to
seek past that limit) even though the device is in fact a PCIe device.
This patch changes virPCIDeviceFindCapabilityOffset() to put the
determined offset into an argument of the function (rather than
sending it back as the return value), and to return the standard "0 on
success, -1 on failure". Failure is determined by checking the value
of errno after each attemptd read of the config file (which can only
work reliably if errno is reset to 0 before each read, and after
virPCIDeviceFindCapabilityOffset() has finished examining it).
(NB: if the config file is read successfully, but no Express
Capabilities are found, then the function returns success, but the
returned offset will be 0 (which is an impossible offset for Express
Capabilities, and so easily recognizeable).
An upcoming patch will take advantage of the change made here.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
