QMP Capability probing will fail if QEMU cannot bind to the
QMP monitor socket in the qemu_driver->libDir directory.
That's because the child process is stripped of all
capabilities and this directory is chown'ed to the configured
QEMU user/group (normally qemu:qemu) by the QEMU driver.
To prevent this from happening, the driver startup will now pass
the QEMU uid and gid down to the capability probing code.
All capability probing invocations of QEMU will be run with
the configured QEMU uid instead of libvirtd's.
Furter, the pid file handling is moved to libvirt, as QEMU
cannot write to the qemu_driver->runDir (root:root). This also
means that the libvirt daemonizing must be used.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If qemuMonitorOpenUnix is called without a related pid, i.e. for
QMP probing, a connect failure can happen as the result of a race.
Without a pid there is no retry and thus we give up too early.
This changes the code to retry if no pid is supplied.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Change some legacy function names to use 'qemu' as their
prefix instead of 'qemud' which was a hang over from when
the QEMU driver ran inside a separate daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=876828
Commit 38c4a9cc introduced a regression in hot unplugging of disks
from qemu, where cgroup device ACLs were no longer being revoked
(thankfully not a security hole: cgroup ACLs only prevent open()
of the disk; so reverting the ACL prevents future abuse but doesn't
stop abuse from an fd that was already opened before the ACL change).
The actual regression is due to a latent bug. The hot unplug code
was computing the set of files needing cgroup ACL revocation based
on the XML passed in by the user, rather than based on the domain's
details on which disk was being deleted. As long as the revoke
path was always recomputing the backing chain, this didn't really
matter; but now that we want to compute the chain exactly once and
remember that computation, we need to hang on to the backing chain
until after the revoke has happened.
* src/qemu/qemu_hotplug.c (qemuDomainDetachPciDiskDevice):
Transfer backing chain before deletion.
This patch introduces the RNG schema and updates necessary data strucutures
to allow various hypervisors to make use of Gluster protocol as one of the
supported network disk backend. Next patch will add support to make use of
this feature in Qemu since it now supports Gluster protocol as one of the
network based storage backend.
Two new optional attributes for <host> element are introduced - 'transport'
and 'socket'. Valid transport values are tcp, unix or rdma. If none specified,
tcp is assumed. If transport is unix, socket specifies path to unix socket.
This patch allows users to specify disks on gluster backends like this:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume1/image'>
<host name='example.org' port='6000' transport='tcp'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume2/image'>
<host transport='unix' socket='/path/to/sock'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Although we require various C99 features, we don't yet require a
complete C99 compiler. On RHEL 5, compilation complained:
qemu/qemu_command.c: In function 'qemuBuildGraphicsCommandLine':
qemu/qemu_command.c:4688: error: 'for' loop initial declaration used outside C99 mode
* src/qemu/qemu_command.c (qemuBuildGraphicsCommandLine): Declare
variable sooner.
* src/qemu/qemu_process.c (qemuProcessInitPasswords): Likewise.
The error "... but the cause is unknown" appeared for XMLs similar to
this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/dev/zero'/>
<target dev='sr0'/>
</disk>
Notice unsupported disk type (for the driver), but also no address
specified. The first part is not a problem and we should not abort
immediately because of that, but the combination with the address
unknown was causing an unspecified error.
While fixing this, I added an error to one place where this return
value was not managed properly.
I have been testing libvirt v1.0.0 for deployment within my
organization, and in the process discovered what appears to be a bug
that breaks virsh attach-device, when attaching an RBD volume to an
instance. First, here is the error presented, with v1.0.0 (this worked
in v0.10.2):
[root@host ~]# virsh attach-device W5APQ8 G84VV1.xml
error: Failed to attach device from G84VV1.xml
error: cannot open file 'dc3-1-test/G84VV1': No such file or directory
Using git bisect, I narrowed the problem down to this as the first
commit to break this setup:
4d34c92947 is the first bad commit
Upcoming patches for revert-and-clone branching of snapshots need
to be able to copy a domain definition; make this step reusable.
* src/conf/domain_conf.h (virDomainDefCopy): New prototype.
* src/conf/domain_conf.c (virDomainObjCopyPersistentDef): Split...
(virDomainDefCopy): ...into new function.
(virDomainObjSetDefTransient): Use it.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use it.
This patch adds a helper to determine if snapshots are external and uses
the helper to fix detection of those in snapshot deletion code.
Snapshots are external if they have an external memory image or if the
disk locations are external. As mixed snapshots are forbidden for now
we need to check just one disk to know.
Currently, if user calls virDomainAbortJob we just issue
'migrate_cancel' and hope for the best. However, if user calls
the API in wrong phase when migration hasn't been started yet
(perform phase) the cancel request is just ignored. With this
patch, the request is remembered and as soon as perform phase
starts, migration is cancelled.
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.
Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.
Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.
N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When the libvirt daemon is restarted it tries to reconnect to running
qemu domains. Since commit d38897a5d4 the
re-connection code runs in separate threads. In the original
implementation the maximum of domain ID's (that is used as an
initializer for numbering guests created next) while libvirt was
reconnecting to the guest.
With the threaded implementation this opens a possibility for race
conditions with the thread that is autostarting guests. When there's a
guest running with id 1 and the daemon is restarted. The autostart code
is reached first and spawns the first guest that should be autostarted
as id 1. This results into the following unwanted situation:
# virsh list
Id Name State
----------------------------------------------------
1 guest1 running
1 guest2 running
This patch extracts the detection code before the re-connection threads
are started so that the maximum id of the guests being reconnected to is
known.
The only semantic change created by this is if the guest with greatest ID
quits before we are able to reconnect it's ID is used anyway as the
greatest one as without this patch the greatest ID of a process we could
successfuly reconnect to would be used.
This patch adds support for external disk snapshots of inactive domains.
The snapshot is created by calling using qemu-img by calling:
qemu-img create -f format_of_snapshot -o
backing_file=/path/to/src,backing_fmt=format_of_backing_image
/path/to/snapshot
in case the backing image format is known or probing is allowed and
otherwise:
qemu-img create -f format_of_snapshot -o backing_file=/path/to/src
/path/to/snapshot
on each of the disks selected for snapshotting. This patch also modifies
the snapshot preparing function to support creating external snapshots
and to sanitize arguments. For now the user isn't able to mix external
and internal snapshots but this restriction might be lifted in the
future.
Some operations, APIs needs domain to be paused prior operation can be
performed, e.g. (managed-) save of a domain. The processors should be
restored in the end. However, if 'cont' fails for some reason, we log a
message but this is not sufficient as an event should be emitted as
well. Mgmt application can then decide what to do.
The code that was split out into the qemuDomainSaveMemory expands the
pointer containing the XML description of the domain that it gets from
higher layers. If the pointer changes the old one is invalid and the
upper layer function tries to free it causing an abort.
This patch changes the expansion of the original string to a new
allocation and copy of the contents.
qemu is sensitive to the order of arguments passed. Hence, if a
device requires a controller, the controller cmd string must
precede device cmd string. The same apply for controllers, when
for instance ccid controller requires usb controller. So
controllers create partial ordering in which they should be added
to qemu cmd line.
Some of the pre-snapshot check have restrictions wired in regarding
configuration options that influence taking of external checkpoints.
This patch removes restrictions that would inhibit taking of such a
snapshot.
This patch adds support to take external system checkpoints.
The functionality is layered on top of the previous disk-only snapshot
code. When the checkpoint is requested the domain memory is saved to the
memory image file using migration to file. (The user may specify to
take the memory image while the guest is live with the
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag.)
The memory save image shares format with the image created by
virDomainSave() API.
Before now, libvirt supported only internal snapshots for active guests.
This patch renames this function to qemuDomainSnapshotCreateActiveInternal
to prepare the grounds for external active snapshots.
The new external system checkpoints will require an async job while the
snapshot is taken. This patch adds QEMU_ASYNC_JOB_SNAPSHOT to track this
job type.
The code that saves domain memory by migration to file can be reused
while doing external checkpoints of a machine. This patch extracts the
common code and places it in a separate function.
When pausing the guest while migration is running (to speed up
convergence) the virDomainSuspend API checks if the migration job is
active before entering the job. This could cause a possible race if the
virDomainSuspend is called while the job is active but ends before the
Suspend API enters the job (this would require that the migration is
aborted). This would cause a incorrect event to be emitted.
Both system checkpoint snapshots and disk snapshots were iterating
over all disks, doing a final sanity check before doing any work.
But since future patches will allow offline snapshots to be either
external or internal, it makes sense to share the pass over all
disks, and then relax restrictions in that pass as new modes are
implemented. Future patches can then handle external disks when
the domain is offline, then handle offline --disk-snapshot, and
finally, combine with migration to file to gain a complete external
system checkpoint snapshot of an active domain without using 'savevm'.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotIsAllowed): Merge...
(qemuDomainSnapshotPrepare): ...into one function.
(qemuDomainSnapshotCreateXML): Update caller.
Now that the XML supports listing internal snapshots, it is worth
always populating the <memory> and <disks> element to match.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Always
parse disk info and set memory info.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=871273
when using virsh qemu-attach to attach an existing qemu process,
if it misses the -M option in qemu command line, libvirtd crashed
because the NULL value of def->os.machine in later use.
Example:
/usr/libexec/qemu-kvm -name foo \
-cdrom /var/lib/libvirt/images/boot.img \
-monitor unix:/tmp/demo,server,nowait \
error: End of file while reading data: Input/output error
error: Failed to reconnect to the hypervisor
This patch tries to set default machine type if the value of
def->os.machine is still NULL after qemu command line parsing.
Per the code comment in qemuCapsInitQMPBasic() and commit 43e23c7, we
should only use QMP for capabilities probing starting with 1.2 and
newer. The old code had dead logic that probed on 1.0 and newer.
Signed-off-by: Eric Blake <eblake@redhat.com>
The string comparison logic was inverted and matched the first drive
that does *not* have the name we search for.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QEMU -drive id= begins with libvirt's QEMU host drive prefix
("drive-"), which is stripped off in several places two convert between
host ("-drive") and guest ("-device") device names.
In the case of BlkIoTune it is unnecessary to strip the QEMU host drive
prefix because we operate on "info block"/"query-block" output that uses
host drive names.
Stripping the prefix incorrectly caused string comparisons to fail since
we were comparing the guest device name against the host device name.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU uses 'i386' for its 32-bit x86 architecture, but libvirt
wants that to be 'i686', so we must fix it up
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871756
Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.
For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program. We should prefer mkostemp[s] in the first place.
* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
https://bugzilla.redhat.com/show_bug.cgi?id=871312
Recent fixes made almost all the right steps to make emulator pinned
to the cpuset of the whole domain in case <emulatorpin> isn't
specified, but qemudDomainGetEmulatorPinInfo still reports all the
CPUs even when cpuset is specified. This patch fixes that.
When there is no 'qemu-kvm' binary and the emulator used for a machine
is, for example, 'qemu-system-x86_64' that, by default, runs without
kvm enabled, libvirt still supplies '-no-kvm' option to this process,
even though it does not recognize such option (making the start of a
domain fail in that case).
This patch fixes building a command-line for QEMU machines without KVM
acceleration and is based on following assumptions:
- QEMU_CAPS_KVM flag means that QEMU is running KVM accelerated
machines by default (without explicitly requesting that using a
command-line option). It is the closest to the truth according to
the code with the only exception being the comment next to the
flag, so it's fixed in this patch as well.
- QEMU_CAPS_ENABLE_KVM flag means that QEMU is, by default, running
without KVM acceleration and in case we need KVM acceleration it
needs to be explicitly instructed to do so. This is partially
true for the past (this option essentially means that QEMU
recognizes the '-enable-kvm' option, even though it's almost the
same).
Currently, we use iohelper when saving/restoring a domain.
However, if there's some kind of error (like I/O) it is not
propagated to libvirt. Since it is not qemu who is doing
the actual write() it will not get error. The iohelper does.
Therefore we should check for iohelper errors as it makes
libvirt more user friendly.
In the XML warning, we print a virsh command line that can be used to
edit that XML. This patch prints UUIDs if the entity name contains
special characters (like shell metacharacters, or "--" that would break
parsing of the XML comment). If the entity doesn't have a UUID, just
print the virsh command that can be used to edit it.
When using block copy to pivot over to a new chain, the backing files
for the new chain might still need labeling (particularly if the user
passes --reuse-ext with a relative backing file name). Relabeling a
file that is already labeled won't hurt, so this just labels the entire
chain at the point of the pivot. Doing the relabel of the chain uses
the fact that we already safely probed the file type of an external
file at the start of the block copy.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot): Relabel chain before
asking qemu to pivot.
Use the recent addition of qemuDomainPrepareDiskChainElement to
obtain locking manager lease, permit a block device through cgroups,
and set the SELinux label; then audit the fact that we hand a new
file over to qemu. Alas, releasing the lease and label at the end
of the mirroring is a trickier prospect (we would have to trace the
backing chain of both source and destination, and be sure not to
revoke rights to any part of the chain that is shared), so for now,
virDomainBlockJobAbort still leaves things with additional access
granted (as block-pull and block-commit have the same problem of
not clamping access after completion, a future cleanup would cover
all three commands).
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set up labeling.
Support the REUSE_EXT flag, in part by copying sanity checks from
snapshot code. This code introduces a case of probing an external
file for its type; such an action would be a security risk if the
existing file is supposed to be raw but the contents resemble some
other format; however, since the virDomainBlockRebase API has a
flag to force treating the file as raw rather than probe, we can
assume that probing is safe in all other instances. Besides, if
we don't probe or force raw, then qemu will.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow REUSE_EXT
flag.
(qemuDomainBlockCopy): Wire up flag, and add some sanity checks.
Minimal patch to wire up all the pieces in the previous patches
to actually enable a block copy job. By minimal, I mean that
qemu creates the file (that is, no REUSE_EXT flag support yet),
SELinux must be disabled, a lock manager is not informed, and the
audit logs aren't updated. But those will be added as
improvements in future patches.
This patch is designed so that if we ever add a future API
virDomainBlockCopy with more bells and whistles (such as letting
the user specify a destination image format different than the
source), where virDomainBlockRebase is a wrapper around the
simpler portions of the new functionality, then the new API can
just reuse the new qemuDomainBlockCopy function and already
support _SHALLOW and _REUSE_EXT flags. Also note that libvirt.c
already filtered the new flags if _COPY is not present, so that
we are not impacting the case of BlockRebase being a wrapper
around BlockPull.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): New function.
(qemuDomainBlockRebase): Call it when appropriate.
Since libvirt drops locks between issuing a monitor command and
getting a response, it is possible for libvirtd to be restarted
before getting a response on a block-job-complete command; worse, it
is also possible for the guest to shut itself down during the window
while libvirtd is down, ending the qemu process. A management app
needs to know if the pivot happened (and the destination file
contains guest contents not in the source) or failed (and the source
file contains guest contents not in the destination), but since
the job is finished, 'query-block-jobs' no longer tracks the
status of the job, and if the qemu process itself has disappeared,
even 'query-block' cannot be checked to ask qemu its current state.
At the time of this patch, the design for persistent bitmap has not
been clarified, so a followup patch will be needed once qemu
actually figures out how to expose it, and we figure out how to use
it. In the meantime, we have a solution that avoids the worst of
the problem. [This problem was first analyzed with the RHEL 6.3
__com.redhat_drive-reopen command; which partly explains why
upstream qemu 1.3 ditched the drive-reopen idea and went with
block-job-complete plus persistent bitmap instead.]
If we surround 'drive-reopen' with a pause/resume pair, then we can
guarantee that the guest cannot modify either source or destination
files in the window of libvirtd uncertainty, and the management app
is guaranteed that either libvirt knows the outcome and reported it
correctly; or that on libvirtd restart, the guest will still be
paused and that the qemu process cannot have disappeared due to
guest shutdown; and use that as a clue that the management app must
implement recovery protocol, with both source and destination files
still being in sync and with 'query-block' still being an option as
part of that recovery. My testing shows that the pause window will
typically be only a fraction of a second.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot): Pause around
drive-reopen.
(qemuDomainBlockJobImpl): Update caller.
This is the bare minimum to end a copy job (of course, until a
later patch adds the ability to start a copy job, this patch
doesn't do much in isolation; I've just split the patches to
ease the review).
This patch intentionally avoids SELinux, lock manager, and audit
actions. Also, if libvirtd restarts at the exact moment that a
'block-job-complete' is in flight, the proposed proper way to
detect the outcome of that would be with a persistent bitmap and
some additional query commands when libvirtd restarts. This
patch is enough to test the common case of success when used
correctly, while saving the subtleties of proper cleanup for
worst-case errors for later.
When a mirror job is started, cancelling the job safely reverts back
to the source disk, regardless of whether the destination is in
phase 1 (streaming, in which case the destination is worthless) or
phase 2 (mirroring, in which case the destination is synced up to
the source at the time of the cancel). Our existing code does just
fine in either phase, other than some bookkeeping cleanup; this
implements live block copy.
Ideas for future enhancements via new flags:
Depending on when persistent bitmap support is added, it may be
worth adding a VIR_DOMAIN_REBASE_COPY_ATOMIC flag that fails up
front if we detect an older qemu with risky pivot operation.
Interesting side note: while snapshot-create --disk-only creates a
copy of the disk at a point in time by moving the domain on to a
new file (the copy is the file now in the just-extended backing
chain), blockjob --abort of a copy job creates a copy of the disk
while keeping the domain on the original file. There may be
potential improvements to the snapshot code to exploit block copy
over multiple disks all at one point in time. And, if
'block-job-cancel' were made part of 'transaction', you could
copy multiple disks at the same point in time without pausing
the domain. This also implies we may want to add a --quiesce flag
to virDomainBlockJobAbort, so that when breaking a mirror (whether
by cancel or pivot), the side of the mirror that we are abandoning
is at least in a stable state with regards to guest I/O.
* src/qemu/qemu_driver.c (qemuDomainBlockJobAbort): Accept new flag.
(qemuDomainBlockPivot): New helper function.
(qemuDomainBlockJobImpl): Implement it.
Handle the new type of block copy event and info. Of course,
this patch does nothing until a later patch actually allows the
creation/abort of a block copy job.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_READY): New
block job status.
* src/libvirt.c (virDomainBlockRebase): Document the event.
* src/qemu/qemu_monitor_json.c (eventHandlers): New event.
(qemuMonitorJSONHandleBlockJobReady): New function.
(qemuMonitorJSONGetBlockJobInfoOne): Translate new job type.
(qemuMonitorJSONHandleBlockJobImpl): Handle new event and job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Recognize
the event to minimize snooping.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Snoop a successful
info query to save effort on a pivot request.
For now, disk migration via block copy job is not implemented in
libvirt. But when we do implement it, we have to deal with the
fact that qemu does not yet provide an easy way to re-start a qemu
process with mirroring still intact. Paolo has proposed an idea
for a persistent dirty bitmap that might make this possible, but
until that design is complete, it's hard to say what changes
libvirt would need. Even something like 'virDomainSave' becomes
hairy, if you realize the implications that 'virDomainRestore'
would be stuck with recreating the same mirror layout.
But if we step back and look at the bigger picture, we realize that
the initial client of live storage migration via disk mirroring is
oVirt, which always uses transient domains, and that if a transient
domain is destroyed while a mirror exists, oVirt can easily restart
the storage migration by creating a new domain that visits just the
source storage, with no loss in data.
We can make life a lot easier by being cowards for now, forbidding
certain operations on a domain. This patch guarantees that we
never get in a state where we would have to restart a domain with
a mirroring block copy, by preventing saves, snapshots, migration,
hot unplug of a disk in use, and conversion to a persistent domain
(thankfully, it is still relatively easy to 'virsh undefine' a
running domain to temporarily make it transient, run tests on
'virsh blockcopy', then 'virsh define' to restore the persistence).
Later, if the qemu design is enhanced, we can relax our code.
The change to qemudDomainDefine looks a bit odd for undoing an
assignment, rather than probing up front to avoid the assignment,
but this is because of how virDomainAssignDef combines both a
lookup and assignment into a single function call.
* src/conf/domain_conf.h (virDomainHasDiskMirror): New prototype.
* src/conf/domain_conf.c (virDomainHasDiskMirror): New function.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemudDomainDefine): Prevent dangerous
actions while block copy is already in action.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
Upstream qemu 1.3 is adding two new monitor commands, 'drive-mirror'
and 'block-job-complete'[1], which can drive live block copy and
storage migration. [Additionally, RHEL 6.3 had backported an earlier
version of most of the same functionality, but under the names
'__com.redhat_drive-mirror' and '__com.redhat_drive-reopen' and with
slightly different JSON arguments, and has been using patches similar
to these upstream patches for several months now.]
The libvirt API virDomainBlockRebase as already committed for 0.9.12
is flexible enough to expose the basics of block copy, but some
additional features in the 'drive-mirror' qemu command, such as
setting error policy, setting granularity, or using a persistent
bitmap, may later require a new libvirt API virDomainBlockCopy. I
will wait to add that API until we know more about what qemu 1.3
will finally provide.
This patch caters only to the upstream qemu 1.3 interface, although
I have proven that the changes for RHEL 6.3 can be isolated to
just qemu_monitor_json.c, and the rest of this series will
gracefully handle either interface once the JSON differences are
papered over in a downstream patch.
For consistency with other block job commands, libvirt must handle
the bandwidth argument as MiB/sec from the user, even though qemu
exposes the speed argument as bytes/sec; then again, qemu rounds
up to cluster size internally, so using MiB hides the worst effects
of that rounding if you pass small numbers.
[1]https://lists.gnu.org/archive/html/qemu-devel/2012-10/msg04123.html
* src/qemu/qemu_capabilities.h (QEMU_CAPS_DRIVE_MIRROR)
(QEMU_CAPS_DRIVE_REOPEN): New bits.
* src/qemu/qemu_capabilities.c (qemuCaps): Name them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
them.
(qemuMonitorJSONDriveMirror, qemuMonitorDrivePivot): New functions.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror)
(qemuMonitorDrivePivot): Declare them.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror)
(qemuMonitorDrivePivot): New passthroughs.
* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror)
(qemuMonitorDrivePivot): Declare them.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
It turns out that the cpuacct results properly account for offline
cpus, and always returns results for every possible cpu, not just
the online ones. So there is no need to check the map of online
cpus in the first place, merely only a need to know the maximum
possible cpu. Meanwhile, virNodeGetCPUBitmap had a subtle change
from returning the maximum id to instead returning the width of
the bitmap (one larger than the maximum id) in commit 2f4c5338,
which made this code encounter some off-by-one logic leading to
bad error messages when a cpu was offline:
$ virsh cpu-stats dom
error: Failed to virDomainGetCPUStats()
error: An error occurred, but the cause is unknown
Cleaning this up unraveled a chain of other unused variables.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Drop
pointless check for cpumap changes, and use correct number of
cpus. Simplify signature.
(qemuDomainGetCPUStats): Adjust caller.
* src/nodeinfo.h (nodeGetCPUCount): New prototype.
(nodeGetCPUBitmap): Drop unused parameter.
* src/nodeinfo.c (nodeGetCPUBitmap): Likewise.
(nodeGetCPUMap): Adjust caller.
(nodeGetCPUCount): New function.
* src/libvirt_private.syms (nodeinfo.h): Export it.
Callers should not need to know what the name of the file to
be read in the Linux-specific version of nodeGetCPUmap;
furthermore, qemu cares about online cpus, not present cpus,
when determining which cpus to skip.
While at it, I fixed the fact that we were computing the maximum
online cpu id by doing a slow iteration, when what we really want
to know is the max available cpu.
* src/nodeinfo.h (nodeGetCPUmap): Rename...
(nodeGetCPUBitmap): ...and simplify signature.
* src/nodeinfo.c (linuxParseCPUmax): New function.
(linuxParseCPUmap): Simplify and alter signature.
(nodeGetCPUBitmap): Change implementation.
* src/libvirt_private.syms (nodeinfo.h): Reflect rename.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Update
caller.
On one hand, numad probably will manage the affinity of domain process
dynamically in future. On the other hand, even numad won't manage it,
it still could confusion. Let's make things simpler enough to avoid
the lair for now.
When the cpu placement model is "auto", it sets the affinity for
domain process with the advisory nodeset from numad, however,
creating cgroup for the domain process (called emulator thread
in some contexts) later overrides that with pinning it to all
available pCPUs.
How to reproduce:
* Configure the domain with "auto" placement for <vcpu>, e.g.
<vcpu placement='auto'>4</vcpu>
* % virsh start dom
* % cat /proc/$dompid/status
Though the emulator cgroup cause conflicts, but we can't simply
prohibit creating it, as other tunables are still useful, such
as "emulator_period", which is used by API
virDomainSetSchedulerParameter. So this patch doesn't prohibit
creating the emulator cgroup, but inherit the nodeset from numad,
and reset the affinity for domain process.
* src/qemu/qemu_cgroup.h: Modify definition of qemuSetupCgroupForEmulator
to accept the passed nodenet
* src/qemu/qemu_cgroup.c: Set the affinity with the passed nodeset
Abstract the codes to prepare cpumap into a helper a function,
which can be used later.
* src/qemu/qemu_process.h: Declare qemuPrepareCpumap
* src/qemu/qemu_process.c: Implement qemuPrepareCpumap, and use it.
Transport Open vSwitch per-port data during live
migration by using the utility functions
virNetDevOpenvswitchGetMigrateData() and
virNetDevOpenvswitchSetMigrateData().
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
Add the ability for the Qemu V3 migration protocol to
include transporting network configuration. A generic
framework is proposed with this patch to allow for the
transfer of opaque data.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
Signed-off-by: Laine Stump <laine@laine.org>
The snapshot code when reusing an existing file had hard-to-read
logic, as well as a missing sanity check: REUSE_EXT should require
the destination to already be present.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare): Require
destination on REUSE_EXT, rename variable for legibility.
Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
Yet another instance of where using plain open() mishandles files
that live on root-squash NFS, and where improving the API can
improve the chance of a successful probe.
* src/util/storage_file.h (virStorageFileProbeFormat): Alter
signature.
* src/util/storage_file.c (virStorageFileProbeFormat): Use better
method for opening file.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Update caller.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
In v2 migration protocol, XML is obtained by calling domainGetXMLDesc.
This includes the default USB controller in XML, which breaks migration
to older libvirt (before 0.9.2).
Commit 409b5f5495
qemu: Emit compatible XML when migrating a domain
only fixed this for v3 migration.
This patch uses the new VIR_DOMAIN_XML_MIGRATABLE flag (detected by
VIR_DRV_FEATURE_XML_MIGRATABLE) to obtain XML without the default controller,
enabling backward v2 migration.
As we switched to setting capabilities based on QMP communication,
qemu seamless-migration capability was not set. In the -help output
this knob is called seamless-migration=[on|off]. The equivalent in
QMP world is SPICE_MIGRATE_COMPLETED event (qemu upstream commit
2fdd16e2).
Gcc with optimization warns:
../../src/qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
../../src/qemu/qemu_driver.c:12813:46: error: 'disk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
../../src/qemu/qemu_driver.c:12698:25: note: 'disk' was declared here
cc1: all warnings being treated as errors
so obviously I had only been testing with optimization off.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Guard cleanup.
I finally have all the pieces in place to perform a block-commit with
SELinux enforcing. There's still missing cleanup work when the commit
completes, but doing that requires tracking both the backing chain and
the base and top files within that chain in domain XML across libvirtd
restarts. Furthermore, from a security standpoint, once you have
granted access, you must assume any damage that can be done will be
done; later revoking access is nice to minimize the window of damage,
but less important as it does not affect the fact that damage can be
done in the first place. Therefore, deferring the revoke efforts until
we have better XML tracking of what chain operations are in effect,
including across a libvirtd restart, is reasonable.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Label disks as
needed.
(qemuDomainPrepareDiskChainElement): Cast away const.
Previously, snapshot code did its own permission granting (lock
manager, cgroup device controller, and security manager labeling)
inline. But now that we are adding block-commit and block-copy
which also have to change permissions, it's better to reuse
common code for the task. While snapshot should fall back to
no access if read-write access failed, block-commit will want to
fall back to read-only access. The common code doesn't know
whether failure to grant read-write access should revert to no
access (snapshot, block-copy) or read-only access (block-commit).
This code can also be used to revoke access to unused files after
block-pull.
It might be nice to clean things up in a future patch by adding
new functions to the lock manager, cgroup manager, and security
manager that takes a single file name and applies context of a
disk to that file, rather than the current semantics of applying
context to the entire chain already associated to a disk. That
way, we could avoid the games this patch plays of temporarily
swapping out the disk->src and related fields of the disk. But
that would involve more code changes, so this patch really is
the smallest hack for doing the necessary work; besides, this
patch is more or less code motion (the hack was already employed
by the snapshot creation code, we are just making it reusable).
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive): Refactor labeling hacks...
(qemuDomainPrepareDiskChainElement): ...into new function.
Now that we can crawl the chain of backing files, we can do
argument validation and implement the 'shallow' flag. In
testing this, I discovered that it can be handy to pass the
shallow flag and an explicit base, as a means of validating
that the base is indeed the file we expected.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Crawl through
chain to implement shallow flag.
* src/libvirt.c (virDomainBlockCommit): Relax API.
This is the bare minimum to kick off a block commit. In particular,
flags support is missing (shallow requires us to crawl the backing
chain to determine the file name to pass to the qemu monitor command;
delete requires us to track what needs to be deleted at the time
the completion event fires). Also, we are relying on qemu to do
error checking (such as validating 'top' and 'base' as being members
of the backing chain), including the fact that the current qemu code
does not support committing the active layer (although it is still
planned to add that before qemu 1.3). Since the active layer won't
change, we have it easy and do not have to alter the domain XML.
Additionally, this will fail if SELinux is enforcing, because we fail
to grant qemu proper read/write access to the files it will modify.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): New function.
(qemuDriver): Register it.
qemu 1.3 will be adding a 'block-commit' monitor command, per
qemu.git commit ed61fc1. It matches nicely to the libvirt API
virDomainBlockCommit.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCK_COMMIT): New bit.
* src/qemu/qemu_capabilities.c (qemuCapsProbeQMPCommands): Set it.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): New prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Implement it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
(qemuMonitorJSONHandleBlockJobImpl)
(qemuMonitorJSONGetBlockJobInfoOne): Handle new event type.
We used to walk the backing file chain at least twice per disk,
once to set up cgroup device whitelisting, and once to set up
security labeling. Rather than walk the chain every iteration,
which possibly includes calls to fork() in order to open root-squashed
NFS files, we can exploit the cache of the previous patch.
* src/conf/domain_conf.h (virDomainDiskDefForeachPath): Alter
signature.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Require caller
to supply backing chain via disk, if recursion is desired.
* src/security/security_dac.c
(virSecurityDACSetSecurityImageLabel): Adjust caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityImageLabel): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupDiskCgroup)
(qemuTeardownDiskCgroup): Likewise.
(qemuSetupCgroup): Pre-populate chain.
Technically, we should not be re-probing any file that qemu might
be currently writing to. As such, we should cache the backing
file chain prior to starting qemu. This patch adds the cache,
but does not use it until the next patch.
Ultimately, we want to also store the chain in domain XML, so that
it is remembered across libvirtd restarts, and so that the only
kosher way to modify the backing chain of an offline domain will be
through libvirt API calls, but we aren't there yet. So for now, we
merely invalidate the cache any time we do a live operation that
alters the chain (block-pull, block-commit, external disk snapshot),
as well as tear down the cache when the domain is not running.
* src/conf/domain_conf.h (_virDomainDiskDef): New field.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean new field.
* src/qemu/qemu_domain.h (qemuDomainDetermineDiskChain): New
prototype.
* src/qemu/qemu_domain.c (qemuDomainDetermineDiskChain): New
function.
* src/qemu/qemu_driver.c (qemuDomainAttachDeviceDiskLive)
(qemuDomainChangeDiskMediaLive): Pre-populate chain.
(qemuDomainSnapshotCreateSingleDiskActive): Uncache chain before
snapshot.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Update
chain after block pull.
Requiring pre-allocation was an unusual idiom. It allowed iteration
over the backing chain to use fewer mallocs, but made one-shot
clients harder to read. Also, this makes it easier for a future
patch to move away from opening fds on every iteration over the chain.
* src/util/storage_file.h (virStorageFileGetMetadataFromFD): Alter
signature.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Allocate
return value.
(virStorageFileGetMetadata): Update clients.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
This is the last use of raw strings for disk formats throughout
the src/conf directory.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Store enum
rather than string for disk type.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotDefFormat):
Adjust users.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
Express the default disk type as an enum, for easier handling.
* src/conf/capabilities.h (_virCaps): Store enum rather than
string for disk type.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Adjust
clients.
* src/qemu/qemu_driver.c (qemuCreateCapabilities): Likewise.
When an image has no backing file, using VIR_STORAGE_FILE_AUTO
for its type is a bit confusing. Additionally, a future patch
would like to reserve a default value for the case of no file
type specified in the XML, but different from the current use
of -1 to imply probing, since probing is not always safe.
Also, a couple of file types were missing compared to supported
code: libxl supports 'vhd', and qemu supports 'fat' for directories
passed through as a file system.
* src/util/storage_file.h (virStorageFileFormat): Add
VIR_STORAGE_FILE_NONE, VIR_STORAGE_FILE_FAT, VIR_STORAGE_FILE_VHD.
* src/util/storage_file.c (virStorageFileMatchesVersion): Match
documentation when version probing not supported.
(cowGetBackingStore, qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStoreFormat, qedGetBackingStore)
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Take NONE into account.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/conf/storage_conf.c (virStorageVolumeFormatFromString): New
function.
(poolTypeInfo): Use it.
Relabeling tapfd right after the tap device is created.
qemuPhysIfaceConnect is common function called both for static
netdevs and for hotplug netdevs.
Having hostuuid in migration cookie is a nice bonus since it provides an
easy way of detecting migration to the same host. However, requiring it
breaks backward compatibility with older libvirt releases.
Recently, patches were added support for (managed)saving, restoring, and
migrating domains with host USB devices. However, qemu driver would
still forbid migration of such domains because qemuMigrationIsAllowed
was not updated.
If we can't probe the architecture from QMP we parse the architecture
from the qemu binaries name. This results in the architecture being i386
instead of i686 which then results in QEMU_CAPS_PCI_MULTIBUS being unset
which gives a broken qemu command line.
This probably didn't show up earlier since most of the time there's also
a /usr/bin/qemu around which results in i686 capabilities.
When libvirt cannot find a suitable CPU model for host CPU (easily
reproducible by running libvirt in a guest), it would not provide CPU
topology in capabilities XML either. Even though CPU topology is known
and can be queried by virNodeGetInfo. With this patch, CPU topology will
always be provided in capabilities XML regardless on the presence of CPU
model.
Currently we query-spice after the main migration has completed
before moving to next state. Qemu reports this as boolean (not
enclosed within quotes). Therefore it is not correct to use
virJSONValueObjectGetString but virJSONValueObjectGetBoolean instead.
The machine in the last output line of <qemu-binary> -M ?
was always reported as default machine even if this wasn't the
actual default. Trivial fix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
According to our recent changes (clarifications), we should be pinning
qemu's emulator processes using the <vcpu> 'cpuset' attribute in case
there is no <emulatorpin> specified. This however doesn't work
entirely as expected and this patch should resolve all the remaining
issues.
When p2p migration fails early because qemuMigrationIsAllowed or
qemuMigrationIsSafe say migration should be cancelled, we fail to clear
the migration-out async job. As a result of that, further APIs called
for the same domain may fail with Timed out during operation: cannot
acquire state change lock.
Reported by Guido Winkelmann.
It should relabel tapfd of virtual network of type VIR_DOMAIN_NET_TYPE_DIRECT
rather than VIR_DOMAIN_NET_TYPE_NETWORK and VIR_DOMAIN_NET_TYPE_BRIDGE
(commit ae368ebfcc introduced this bug)
Caution: The context of the two hunks is identical other than indentation.
Please be extremely cautious of where the patch gets applied.
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=851981
When using macvtap, a character device gets first created by
kernel with name /dev/tapN, its selinux context is:
system_u:object_r:device_t:s0
Shortly, when udev gets notification when new file is created
in /dev, it will then jump in and relabel this file back to the
expected default context:
system_u:object_r:tun_tap_device_t:s0
There is a time gap happened.
Sometimes, it will have migration failed, AVC error message:
type=AVC msg=audit(1349858424.233:42507): avc: denied { read write } for
pid=19926 comm="qemu-kvm" path="/dev/tap33" dev=devtmpfs ino=131524
scontext=unconfined_u:system_r:svirt_t:s0:c598,c908
tcontext=system_u:object_r:device_t:s0 tclass=chr_file
This patch will label the tapfd device before qemu process starts:
system_u:object_r:tun_tap_device_t:MCS(MCS from seclabel->label)
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
to the extent that it can be resolved with current qemu functionality.
It attempts to detect as many situations as possible when the simple
operation of disconnecting an existing tap device from one bridge and
attaching it to another will satisfy the change requested in
virDomainUpdateDeviceFlags() for a network device. Before this patch,
that situation could only be detected if the pre-change interface
*and* the post-change interface definition were both "type='bridge'".
After this patch, it can also be detected if the before or after
interfaces are any combination of type='bridge' and type='network'
(the networks can be <forward mode='nat|route|bridge'>, as long as
they use a Linux host bridge and not macvtap connections).
This extra effort is especially useful since the recent discovery that
a netdev_del+netdev_add combo (to reconnect the network device with
completely different hostside configuration) doesn't work properly
with current qemu (1.2) unless it is accompanied by the matching
device_del+device_add - see this mailing list message for details:
http://lists.nongnu.org/archive/html/qemu-devel/2012-10/msg02355.html
(A slight modification of the patch referenced there has been prepared
to apply on top of this patch, but won't be pushed until qemu can be
made to work with it.)
* qemuDomainChangeNet needs access to the virDomainDeviceDef that
holds the new netdef (so that it can clear out the virDomainDeviceDef
if it ends up using the NetDef to replace the original), so the
virDomainNetDefPtr arg is replaced with a virDomainDeviceDefPtr.
* qemuDomainChangeNet previously checked for *some* changes to the
interface config, but this check was by no means complete. It was also
a bit disorganized.
This refactoring of the code is (I believe) complete in its check of
all NetDef attributes that might be changed, and either returns a
failure (for changes that are simply impossible), or sets one of three
flags:
needLinkStateChange - if the device link state needs to go up/down
needBridgeChange - if everything else is the same, but it needs
to be connected to a difference linux host
bridge
needReconnect - if the entire host side of the device needs
to be torn down and reconstructed (currently
non-working, as mentioned above)
Note that this function will refuse to make any change that requires
the *guest* side of the device to be detached (e.g. changing the PCI
address or mac address). Those would be disruptive enough to the guest
that it's reasonable to require an explicit detach/attach sequence
from the management application.
* As mentioned above, qemuDomainChangeNet also does its best to
understand when a simple change in attached bridge for the existing
tap device will work vs. the need to completely tear down/reconstruct
the host side of the device (including tap device).
This patch *does not* implement the "reconnect" code anyway - there is
a placeholder that turns that into an error. Rather, the purpose of
this patch is to replicate existing behavior with code that is ready
to have that functionality plugged in in a later patch.
* The expanded uses for qemuDomainChangeNetBridge meant that it needed
to be enhanced as well - it no longer replaces the original brname
string in olddev with the new brname; instead, it relies on the
caller to replace the *entire* olddev with newdev (since we've gone
to great lengths to assure they are functionally identical other
than the name of the bridge, this is now not only safe, but more
correct). Additionally, qemuDomainNetChangeBridge can now set the
bridge for type='network' interfaces as well as plain type='bridge'
interfaces. (Note that I had to make this change simultaneous to the
reorganization of qemuDomainChangeNet because the two are too
closely intertwined to separate).
The onlined vcpu pinning policy should inherit def->cpuset if
it's not specified explicitly, and the affinity should be set
in this case. Oppositely, the offlined vcpu pinning policy should
be free()'ed.
Various APIs use cgroup to either set or get the statistics of
host or guest. Hotplug or hot unplug new vcpus without creating
or removing the cgroup for the vcpus could cause problems for
those APIs. E.g.
% virsh vcpucount dom
maximum config 10
maximum live 10
current config 1
current live 1
% virsh setvcpu dom 2
% virsh schedinfo dom --set vcpu_quota=1000
Scheduler : posix
error: Unable to find vcpu cgroup for rhel6.2(vcpu: 1): No such file or
directory
This patch fixes the problem by creating cgroups for each of the
onlined vcpus, and destroying cgroups for each of the offlined
vcpus.
The comment stated that you may call qemuDomainObjBeginJobWithDriver
without passing qemud_driver to signal it's not locked.
qemuDomainObjBeginJobWithDriver still accesses the qemud_driver
structure and the lock singaling is done through a separate parameter.
Save/restore with passed through USB devices currently only works if the
USB device can be found at the same USB address where it used to be
before saving a domain. This makes sense in case a user explicitly
configure the USB address in domain XML. However, if the device was
found automatically by vendor/product identification, we should try to
search for that device when restoring the domain and use any device we
find as long as there is only one available. In other words, the USB
device can now be removed and plugged again or the host can be rebooted
between saving and restoring the domain.
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
All USB device lookup functions emit an error when they cannot find the
requested device. With this patch, their caller can choose if a missing
device is an error or normal condition.
The code which looks up a USB device specified by hostdev is duplicated
in two places. This patch creates a dedicated function that can be
called in both places.
When adding variants of parameter setting APIs which accepted
flags, the existing APIs were all adapted internally to pass
VIR_DOMAIN_AFFECT_CURRENT to the new API. The QEMU impl
qemuSetSchedularParameters was an exception, which instead
used VIR_DOMAIN_AFFECT_LIVE. Change this to match other
compatibility scenarios, so that calling
virDomainSetSchedularParameters(dom, params, nparams);
Has the same semantics as
virDomainSetSchedularParametersFlags(dom, params, nparams, 0);
And
virDomainSetSchedularParametersFlags(dom, params, nparams, VIR_DOMAIN_AFFECT_CURRENT);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As a side effect of changes in the functions virGetUserID and
virGetGroupID, the user and group configurations for DAC in qemu.conf
are now able to accept both names and IDs, supporting a leading plus
sign to ensure that a numeric value will not be interpreted as a name.
This patch updates the comments in qemu.conf, including a description of
this new behavior.
With the recent introduction of QMP capabilities probing, libvirt failed
to detect support for QXL graphics in QEMU 1.2 and newer. In addition to
fixing that, this patch also causes libvirt to detect QXL support for
qemu-kvm-0.13.0, which doesn't advertise it in -help output but mentions
it in device list. Since qemu-kvm-0.13.0 supported -spice, it looks like
not having qxl in -help was a bug.
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
Introduced in commit 0caccb58.
CC libvirt_driver_qemu_impl_la-qemu_capabilities.lo
../../src/qemu/qemu_capabilities.c: In function 'qemuCapsInitQMP':
../../src/qemu/qemu_capabilities.c:2327:13: error: format '%d' expects argument of type 'int', but argument 8 has type 'const char *' [-Werror=format]
* src/qemu/qemu_capabilities.c (qemuCapsInitQMP): Use correct format.
Since libvirt switched to QMP capabilities probing recently, it starts
QEMU process used for this probing with -daemonize, which means
virCommandAbort can no longer reach these processes. As a result of
that, restarting libvirtd will leave several new QEMU processes behind.
Let's use QEMU's -pidfile and use it to kill the process when QMP caps
probing is done.
When doing snapshots, the filesystem freeze function used the agent
entering function that expects the qemud_driver unlocked. This might
cause a deadlock of the qemu driver if the agent does not respond.
The only call path of this function has the qemud_driver locked, so this
patch changes the entering functions to those expecting the driver
locked.
Start a QEMU process using
$QEMU -S -no-user-config -nodefaults \
-nographic -M none -qmp unix:/some/path,server,nowait
and talk QMP over stdio to discover what capabilities the
binary supports. This works for QEMU 1.2.0 or later and
for older QEMU automatically fallback to the old approach
of parsing -help and related command line args.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some architectures provide the query-cpu-definitions command,
but are set to always return a "GenericError" from it :-(
Catch this & treat it as if there was an empty list of CPUs
returned
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After calling qemuMonitorClose(), it is still possible for
the QEMU monitor I/O event callback to get invoked. This
will trigger an error message because mon->fd has been set
to -1 at this point. Silently ignore the case where mon->fd
is -1, likewise for mon->watch being zero.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorOpen method only needs a virDomainObjPtr in order
to access the QEMU pid. This is not critical when detecting the
QEMU capabilties, so can easily be skipped
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The help output for QEMU 1.2.0 changed 'pci-assign' to 'kvm-pci-assign'.
Since the new capabilities code does exact device name matching
instead of substring matching, this caused the capabilities to go
missing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the qemuCapsParseDeviceStr method has a bunch of open
coded string searches/comparisons to detect devices and their
properties. Soon this data will be obtained from QMP queries
instead of -device help output. Maintaining the list of device
and properties in two places is undesirable. Thus the existing
qemuCapsParseDeviceStr() method needs to be refactored to
separate the device types and properties from the actual
search code.
Thus the -device help output is now parsed to construct a
list of device names, and device properties. These are then
checked against a set of datatables to set the capability
flags
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If QEMU reports CommandNotFound for the 'query-events' command,
we must treat that as success, returning a zero-length array
of events
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorSetCapabilities() API is used to initialize the QMP
protocol capabilities. It has since been abused to initialize some
libvirt internal capabilities based on command/event existance too.
Move the latter code out into qemuCapsProbeQMP() in the QEMU
capabilities source file instead
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu monitor does not require qemu_conf.h, and the
qemu capabilities code actually wants bitmap.h
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetTargetArch() method to support invocation
of the 'query-target' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetObjectProps() method to support invocation
of the 'device-list-properties' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetObjectTypes() method to support invocation
of the 'qom-list-types' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetEvents() method to support invocation
of the 'query-events' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available
The existing qemuMonitorJSONCheckEvents() method is refactored
to use this new method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetCPUCommands() method to support invocation
of the 'query-commands' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available
The existing qemuMonitorJSONCheckCommands() method is refactored
to use this new method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetCPUDefinitions() method to support invocation
of the 'query-cpu-definitions' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetMachines() method to support invocation
of the 'query-machines' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetVersion() method to support invocation
of the 'query-version' JSON monitor command. No HMP equivalent
is provided, since this will only be used for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuCapsProbeMachineTypes & qemuCapsProbeCPUModels methods
do not need to be invoked directly anymore. Make them static
and refactor them to directly populate the qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.
As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building up a virCapsPtr instance, the QEMU driver
was copying the list of machine types across from the
previous virCapsPtr instance, if the QEMU binary had not
changed. Replace this ad-hoc caching of data with use
of the new qemuCapsCache global cache.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a qemuCapsCachePtr object to provide a global cache
of capabilities for QEMU binaries. The cache auto-populates
on first request for capabilities about a binary, and will
auto-refresh if the binary has changed since a previous cache
was populated
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For historical compat we use 'itanium' as the arch name, so
if the QEMU binary suffix is 'ia64' we need to translate it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the qemuAgentClose method is called from a place which holds
the domain lock, it is theoretically possible to get a deadlock
in the agent destroy callback. This has not been observed, but
the equivalent code in the QEMU monitor destroy callback has seen
a deadlock.
Remove the redundant locking while unrefing the object and the
bogus assignment
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many parts of virDomainDefPtr were using 'int' variables as
array length counts. Replace all these with size_t and update
various format strings & API signatures to adapt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some users report (very rarely) seeing a deadlock in the QEMU
monitor callbacks
Thread 10 (Thread 0x7fcd11e20700 (LWP 26753)):
#0 0x00000030d0e0de4d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00000030d0e09ca6 in _L_lock_840 () from /lib64/libpthread.so.0
#2 0x00000030d0e09ba8 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00007fcd162f416d in virMutexLock (m=<optimized out>)
at util/threads-pthread.c:85
#4 0x00007fcd1632c651 in virDomainObjLock (obj=<optimized out>)
at conf/domain_conf.c:14256
#5 0x00007fcd0daf05cc in qemuProcessHandleMonitorDestroy (mon=0x7fcccc0029e0,
vm=0x7fcccc00a850) at qemu/qemu_process.c:1026
#6 0x00007fcd0db01710 in qemuMonitorDispose (obj=0x7fcccc0029e0)
at qemu/qemu_monitor.c:249
#7 0x00007fcd162fd4e3 in virObjectUnref (anyobj=<optimized out>)
at util/virobject.c:139
#8 0x00007fcd0db027a9 in qemuMonitorClose (mon=<optimized out>)
at qemu/qemu_monitor.c:860
#9 0x00007fcd0daf61ad in qemuProcessStop (driver=driver@entry=0x7fcd04079d50,
vm=vm@entry=0x7fcccc00a850,
reason=reason@entry=VIR_DOMAIN_SHUTOFF_DESTROYED, flags=flags@entry=0)
at qemu/qemu_process.c:4057
#10 0x00007fcd0db323cf in qemuDomainDestroyFlags (dom=<optimized out>,
flags=<optimized out>) at qemu/qemu_driver.c:1977
#11 0x00007fcd1637ff51 in virDomainDestroyFlags (
domain=domain@entry=0x7fccf00c1830, flags=1) at libvirt.c:2256
At frame #10 we are holding the domain lock, we call into
qemuProcessStop() to cleanup QEMU, which triggers the monitor
to close, which invokes qemuProcessHandleMonitorDestroy() which
tries to obtain the domain lock again. This is a non-recursive
lock, hence hang.
Since qemuMonitorPtr is a virObject, the unref call in
qemuProcessHandleMonitorDestroy no longer needs mutex
protection. The assignment of priv->mon = NULL, can be
instead done by the caller of qemuMonitorClose(), thus
removing all need for locking.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If QEMU quits immediately after we opened the monitor it was
possible we would skip the clearing of the SELinux process
socket context
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the cgroups APIs we have a virCgroupKillPainfully function
which does the loop sending SIGTERM, then SIGKILL and waiting
for the process to exit. There is similar functionality for
simple processes in qemuProcessKill, but it is tangled with
the QEMU code. Untangle it to provide a virProcessKillPainfuly
function
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When calling qemuProcessKill from the virDomainDestroy impl
in QEMU, do not ignore the return value. This ensures that
if QEMU fails to respond to SIGKILL, the caller will know
about the failure.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recently, there have been some improvements made to qemu so it
supports seamless migration or something very close to it.
However, it requires libvirt interaction. Once qemu is migrated,
the SPICE server needs to send its internal state to the destination.
Once it's done, it fires SPICE_MIGRATE_COMPLETED event and this
fact is advertised in 'query-spice' output as well.
We must not kill qemu until SPICE server finishes the transfer.
SELinux wants all log files opened with O_APPEND. When
running non-root though, libvirtd likes to use O_TRUNC
to avoid log files growing in size indefinitely. Instead
of using O_TRUNC though, we can use O_APPEND and then
call ftruncate() which keeps SELinux happier.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In most of the snapshot API's there's no need to hold the driver lock
the whole time.
This patch adds helper functions that get the domain object in functions
that don't require the driver lock and simplifies call paths from
snapshot-related API's.
maxcpu and hostcpus are defined and calculated in qemudDomainPinVcpuFlags()
and qemudDomainPinEmulator(), but never used. So remove them including nodeinfo.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Disk hotplug is a two phase action: qemuMonitorAddDrive followed by
qemuMonitorAddDevice. When the first part succeeds but the second one
fails, we need to rollback the drive addition.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The "dump-guest-core' option is new option for the machine type
(-machine pc,dump-guest-core) that controls whether the guest memory
will be marked as dumpable.
While testing this, I've found out that the value for the '-M' options
is not parsed correctly when additional parameters are used. However,
when '-machine' is used for the same options, it gets parsed as
expected. That's why this patch also modifies the parsing and creating
of the command line, so both '-M' and '-machine' are recognized. In
QEMU's help there is only mention of the 'machine parameter now with
no sign of the older '-M'.
This patch cleans up building the "-boot" parameter and while on that
fixes one inconsistency by modifying these things:
- I completed the unfinished virDomainBootMenu enum by specifying
LAST, declaring it and also declaring the TypeFromString and
TypeToString parameters.
- Previously mentioned TypeFromString and TypeToString are used when
parsing the XML.
- Last, but not least, visible change is that the "-boot" parameter
is built and parsed properly:
- The "order=" prefix is used only when additional parameters are
used (menu, etc.).
- It's rewritten in a way that other parameters can be added
easily in the future (used in following patch).
- The "order=" parameter is properly parsed regardless to where it
is placed in the string (e.g. "menu=on,order=nc").
- The "menu=" parameter (and others in the future) are created
when they should be (i.e. even when bootindex is supported and
used, but not when bootloader is selected).
Currently, we mark domain PAUSED (but not emit an event)
just before we issue 'stop' on monitor; This command can
take ages to finish, esp. when domain's doing a lot of
IO - users can enforce qemu to open files with O_DIRECT
which doesn't return from write() until data reaches the
block device. Having said that, we report PAUSED even if
domain is not paused yet.
This series adds support to run QEMU with seccomp sandbox enabled. It can be
configured in qemu.conf to on, off, or the QEMU default, which is off in 1.2.
Default value is the QEMU default.
On agent EOF the qemuProcessHandleAgentEOF() callback is called
which locks virDomainObjPtr. Then qemuAgentClose() is called
(with domain object locked) which eventually calls qemuAgentDispose()
and qemuProcessHandleAgentDestroy(). This tries to lock the
domain object again. Hence the deadlock.
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).
* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.
This assumes ide-drive.wwn, ide-hd.wwn, ide-cd.wwn were supported
at the same time, similar for scsi-disk.wwn, scsi-hd.wwn, and
scsi-cd.wwn. So only two new caps (QEMU_CAPS_IDE_DRIVE_WWN,
and QEMU_CAPS_SCSI_DISK_WWN) are introduced.
Upstream qemu has raised a concern about whether dumping guest
memory by reading guest paging tables is a security hole:
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02607.html
While auditing libvirt to see if we would be impacted, I noticed
that we had some dead code. It is simpler to nuke the dead code
and limit our monitor code to just the subset we make use of.
* src/qemu/qemu_monitor.h (QEMU_MONITOR_DUMP): Drop poorly named
and mostly-unused enum.
* src/qemu/qemu_monitor.c (qemuMonitorDumpToFd): Drop arguments.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_driver.c (qemuDumpToFd): Update caller.
If the qemuBuildCommandLine method raised an error before the
virCommandPtr instance was created, the local var would not
be initialized, resulting in a possible SEGV in the error
cleanup branch. Also add some debugging of the method params
Introduce a qemuCapsNewForBinary() API which creates a new
QEMU capabilities object, populated with data relating to
a specific QEMU binary. The qemuCaps object is also given
a timestamp, which makes it possible to detect when the
cached capabilities for a binary are out of date
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Don't bother checking for the existance of the HMP passthrough
command. Just try to execute it, and propagate the failure.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorHMPCommand() API and things it calls will report
a wide variety of errors. The QEMU text monitor should not be
overwriting these errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.
And due to the size of the patch (17 lines) I dared to include the tests.
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=843372
when qemu supports the 'transaction' monitor command,
and libvirt's --reuse-ext flag was not specified, libvirt created
a stub file with zero size in first place. After the failure of
QEMU transaction command performing qcow2 snapshots on more than
one drives, the stub file is left behind with non-empty
by the QEMU transaction command.
In order to unlink the file, the patch removes the file size checking.
Steps to reproduce the issue:
Steps:
1, Create a qemu instance with two drive images of qcow2 type (root user)
/usr/libexec/qemu-kvm -m 1024 -smp 1 -name "rhel6u1" \
-drive file=/var/lib/libvirt/images/firstqcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-drive file=/var/lib/libvirt/images/secondqcow2,if=none,id=drive-virtio-disk1,format=qcow2,cache=none \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk1,id=virtio-disk1 -qmp stdio
2, Initialize qemu qmp
{"execute":"qmp_capabilities"}
3, Remove the second drive image file
rm -f /var/lib/libvirt/images/secondqcow2
4, Run 'transaction' command with snapshot qemu commands in.
{"execute":"transaction","arguments":
{"actions":
[{"type":"blockdev-snapshot-sync","data":
{"device":"drive-virtio-disk0","snapshot-file":"/var/lib/libvirt/images/firstqcow2-snapshot.img","format":"qcow2"}
},
{"type":"blockdev-snapshot-sync","data":
{"device":"drive-virtio-disk1","snapshot-file":"/var/lib/libvirt/images/secondqcow2-snapshot.img","format":"qcow2"}
}]
},
"id":"libvirt-6"}
5, Got the error as follows:
{"id": "libvirt-6",
"error": {"class": "OpenFileFailed", "desc": "Could not open '/var/lib/libvirt/images/secondqcow2-snapshot.img'",
"data": {"filename": "/var/lib/libvirt/images/secondqcow2-snapshot.img"}
}
}
6, List first newly-created snapshot file:
-rw-r--r--. 1 root root 262144 Sep 13 11:43 firstqcow2-snapshot.img
The QEMU capabilities APIs used a misc of 'int' and
'unsigned int' for variables relating to array sizes.
Change all these to use 'size_t'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow each VM instance to record additional capabilities
without affecting other VMs, there needs to be a way to do
a deep copy of the qemuCapsPtr object
Add struct fields and APIs to allow the qemu capabilities object
to store version, arch, machines & cpu names, etc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Technically speaking we should wait until we receive the QMP
greeting message before attempting to send any QMP monitor
commands. Mostly we've got away with this, but there is a race
in some QEMU which cause it to SEGV if you sent it data too
soon after startup. Waiting for the QMP greeting avoids the
race
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a qemu flag for USB redirection filter support.
The output:
usb-redir.chardev=chr
usb-redir.debug=uint8
usb-redir.filter=string
usb-redir.port=string
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
Currently qemuMonitorOpen() requires an address of the QEMU
monitor. When doing QMP based capabilities detection it is
easier if a pre-opened FD can be provided, since then the
monitor can be run on the STDIO console. Add a new API
qemuMonitorOpenFD() for such usage
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add some non-null annotations to qemuMonitorOpen and also
check that the error callback is set, since it is mandatory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The quota and period tunables for cpu scheduler accept only a certain
range of values. When changing the live configuration invalid values get
rejected. This check is not performed when changing persistent config.
This patch adds a separate range check, that improves error messages
when changing live config and adds the check for persistent config.
This check is done only when using the API. It is still possible to
specify invalid values in the XML.
This patch tries to clean the code up a little bit and shorten very long
lines.
The apparent semantic change from moving the condition before calling
the setter function is a non-issue here as the setter function is a
no-op when called with both arguments zero.
This is another fix for the emulator-pin series. When going through
the cputune pinning settings, the current code is trying to pin all
the CPUs, even when not all of them are specified. This causes error
in the subsequent function which, of course, cannot find the cpu to
pin. Since it's enough to pass the correct VCPU ID to the function,
the fix is trivial.
Only VNC_{{DIS,}CONNECTED,INITIALIZED} and SPICE_INITIALIZED events are
documented to support server/auth field and even there it is marked as
optional. Emit "" auth scheme in case QEMU didn't send it.
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When reboot using qemu guest agent was requested, qemu driver kept
waiting for SHUTDOWN event from qemu. However, such event is never
emitted during guest reboot and qemu driver would keep waiting forever.
This patch adds support for running qemu guests with the required
parameters to forcefully enable or disable BIOS advertising of S3 and
S4 states. The support for this is added to capabilities and there is
also a qemu command parameter parsing implemented.
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
After fixing the last review comments on remote port searching (commit
a14b4aea51), the commit right after that
wasn't modified accordingly, therefore two values weren't changed as
they should and the configurable ports don't work as expected.
This simple commit changes last two values missed and fixes the issue.
When domain XML contains any of the elements for setting up CPU
scheduling parameters (period, quota, emulator_period, or
emulator_quota) we need cpu cgroup to enforce the configuration.
However, the existing code would just ignore silently such settings if
either cgroups were not available at all cpu cgroup was not available.
Moreover, APIs for manipulating CPU scheduler parameters were already
failing if cpu cgroup was not available. This patch makes cpu cgroup
mandatory for all domains that use CPU scheduling elements in their XML.
The variable max_id is initialized again in the step of
getting cpu mapping variable map2. But in the next for loop
we still expect original value of max_id, the bug will
crash libvirtd when using on NUMA machine with big number
of cpus.
virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.
Commit d0c0e79ac6 left behind some dead
code (hasDAC can't be efectively set to true, because
virSecurityManagerNew fails to load the "dac" driver).
This patch also enhances the condition for adding the default
auto-detected security manager if the manager array is allocated but
empty.
Also the configuration file for qemu driver still contains reference to
the DAC driver that can't be enabled manualy.
Before commit 05447e3af4, qemuAgentCommand
blocked until it got a reply or appropriate event. When new parameter
was added to qemuAgentCommand in the above commit, all existing callers
of it were updated in a wrong way changing them from blocking to
5-seconds timeout.
This bug was revealed by the crash described in
https://bugzilla.redhat.com/show_bug.cgi?id=852383
The vlan info pointer sent to virNetDevOpenvswitchAddPort should never
be non-NULL unless there is at least one tag. The factthat such a vlan
info pointer was receveid pointed out that a caller was passing the
wrong pointer. Instead of sending &net->vlan, the result of
virDomainNetGetActualVlan(net) should be sent - that function will
look for vlan info in net->data.network.actual->vlan, and in cany case
return NULL instead of a pointer if the vlan info it finds has no
tags.
Aside from causing the crash, sending a hardcoded &net->vlan has the
effect of ignoring vlan info from a <network> or <portgroup> config.
If no 'security_driver' config option was set, then the code
just loaded the 'dac' security driver. This is a regression
on previous behaviour, where we would probe for a possible
security driver. ie default to SELinux if available.
This changes things so that it 'security_driver' is not set,
we once again do probing. For simplicity we also always
create the stack driver, even if there is only one driver
active.
The desired semantics are:
- security_driver not set
-> probe for selinux/apparmour/nop
-> auto-add DAC driver
- security_driver set to a string
-> add that one driver
-> auto-add DAC driver
- security_driver set to a list
-> add all drivers in list
-> auto-add DAC driver
It is not allowed, or possible to specify 'dac' in the
security_driver config param, since that is always
enabled.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The security driver loading code in qemu has a flaw that causes it to
register the DAC security driver twice. This causes problems (machines
unable to start) as the two DAC drivers clash together.
This patch refactors the code to allow loading the DAC driver even if
its specified in configuration (it can't be registered as a common
security driver), and does not add the driver twice.
If cgroups are enabled in general but cpu cgroup is disabled in
qemu.conf or not mounted at all, libvirt would refuse to start any
domain even though scheduler parameters are not set in domain XML.
This patch makes cpu cgroup mandatory only for domains that actually
want to use it.
With current flow in qemudDomainDefine we might lose data
when updating an existing domain. We parse given XML and
overwrite the configuration. Then we try to save the new
config. However, this step may fail and we don't perform any
roll back. In fact, we remove the domain from the list of
domains held up by qemu driver. This is okay as long as the
domain was brand new one.
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
With the latest patches libvirt supports qemu agent monitor
passthrough. However, function in qemu driver is called
qemuDrvDomainAgentCommand. s/Drv// as used in all other names.
In my quest for reusing variables I failed to edit one variable when
fixing details between two patch versions. That results in a failure
to start qemu with autoport and spice tls, because qemu is trying to
bind two sockets to the same port.
Commit 4b03d59167 changed the pinning
behavior in a way that makes some machines non-startable.
The comment mentioning that we cannot control each vcpu when there is
not VCPU<-> PID mapping available is true, however, this isn't
necessarily an error, because this can be caused by old QEMU without
support for "query-cpus" command as well as a software emulated
machines that don't create more than one process.
The name 'virDomainDiskSnapshot' didn't fit in with our normal
conventions of using a prefix hinting that it is related to a
virDomainSnapshotPtr. Also, a future patch will reuse the
enum for declaring where the VM memory is stored.
* src/conf/snapshot_conf.h (virDomainDiskSnapshot): Rename...
(virDomainSnapshotLocation): ...to this.
(_virDomainSnapshotDiskDef): Update clients.
* src/conf/domain_conf.h (_virDomainDiskDef): Likewise.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Likewise.
* src/conf/snapshot_conf.c: (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDefFormat):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotCreateDiskActive, qemuDomainSnapshotCreateXML):
Likewise.
This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)
* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.
We were failing to react to allocation failure when initializing
a snapshot object list. Changing things to store a pointer
instead of a complete object adds one more possible point of
allocation failure, but at the same time, will make it easier to
react to failure now, as well as making it easier for a future
patch to split all virDomainSnapshotPtr handling into a separate
file, as I continue to add even more snapshot code.
Luckily, there was only one client outside of domain_conf.c that
was actually peeking inside the object, and a new wrapper function
was easy.
* src/conf/domain_conf.h (_virDomainObj): Use a pointer.
(virDomainSnapshotObjListInit): Rename.
(virDomainSnapshotObjListFree, virDomainSnapshotForEach): New
declarations.
(_virDomainSnapshotObjList): Move definitions...
* src/conf/domain_conf.c: ...here.
(virDomainSnapshotObjListInit, virDomainSnapshotObjListDeinit):
Rename...
(virDomainSnapshotObjListNew, virDomainSnapshotObjListFree): ...to
these.
(virDomainSnapshotForEach): New function.
(virDomainObjDispose, virDomainListPopulate): Adjust callers.
* src/qemu/qemu_domain.c (qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAllMetadata): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad)
(qemuDomainUndefineFlags, qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainListAllSnapshots)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListAllChildren)
(qemuDomainSnapshotLookupByName, qemuDomainSnapshotGetParent)
(qemuDomainSnapshotGetXMLDesc, qemuDomainSnapshotIsCurrent)
(qemuDomainSnapshotHasMetadata, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDelete): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new function.
The recent virDomainQemuAgentCommand addition is part of 0.10.0;
also, grouping all libvirt-qemu.so callbacks together makes them
easier to identify.
* src/libvirt_qemu.syms: Fix release symbol.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/driver.h (_virDriver): Group qemu-specific callbacks.
If a domain is pmsuspended then virsh suspend will succeed. Beside
obvious flaw, virsh resume will report success and change domain
state to running which is another mistake. Therefore we must forbid
any attempts for suspend and resume when pmsuspended.
Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.
Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
This patch introduces support of setting emulator's period and
quota to limit cpu bandwidth when the vm starts. Also updates
XML Schema for new entries and docs.
This patch changes the behaviour of xml element cputune.period
and cputune.quota to limit cpu bandwidth only for vcpus, and no
longer limit cpu bandwidth for the whole guest.
The reasons to do this are:
- This matches docs of cputune.period and cputune.quota.
- The other parts excepting vcpus are treated as "emulator",
and there are separate period/quota settings for emulator
in the subsequent patches
Introduce 2 APIs to support emulator threads pin in qemu driver.
1) qemudDomainPinEmulator: setup emulator threads pin info.
2) qemudDomainGetEmulatorPinInfo: get all emulator threads pin info.
They are similar to qemudDomainPinVcpuFlags and qemudDomainGetVcpuPinInfo.
And also, remoteDispatchDomainPinEmulatorFlags and remoteDispatchDomainGetEmulatorPinInfo
functions are introduced.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Emulator threads should also be pinned by sched_setaffinity(), just
the same as vcpu threads.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Introduce qemuSetupCgroupEmulatorPin() function to add emulator
threads pin info to cpuset cgroup, the same as vcpupin.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
vcpu threads pin are implemented using sched_setaffinity(), but
not controlled by cgroup. This patch does the following things:
1) enable cpuset cgroup
2) reflect all the vcpu threads pin info to cgroup
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Create a new cgroup and move all emulator threads to the new cgroup.
And then we can do the other things:
1. limit only vcpu usage rather than the whole qemu
2. limit for emulator threads(include vhost-net threads)
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Qemu command line generation for geometry override and testcases.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
After the cleanup of remote display port allocation, I noticed some
messages that didn't make a lot of sense the way they were written. So
I rephrased them.
The defines QEMU_REMOTE_PORT_MIN and QEMU_REMOTE_PORT_MAX were used to
find free port when starting domains. As this was hard-coded to the
same ports as default VNC servers, there were races with these other
programs. This patch includes the possibility to change the default
starting port as well as the maximum port (mostly for completeness) in
qemu config file.
Support for two new config options in qemu.conf is added:
- remote_port_min (defaults to QEMU_REMOTE_PORT_MIN and
must be >= than this value)
- remote_port_max (defaults to QEMU_REMOTE_PORT_MAX and
must be <= than this value)
Port allocations for SPICE and VNC behave almost the same (with
default ports), but there is some mess in the code. This patch clears
these inconsistencies and makes sure the same behavior will be used
when ports for remote displays are changed.
Changes:
- hard-coded number 5900 removed (handled elsewhere like with VNC)
- reservedVNCPorts renamed to reservedRemotePorts (it's not just for
VNC anymore)
- QEMU_VNC_PORT_{MIN,MAX} renamed to QEMU_REMOTE_PORT_{MIN,MAX}
- port allocation unified for VNC and SPICE
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the key "security_driver" in QEMU config to suport
both a sigle default driver or a list of default drivers. This ensures
that it will remain compatible with older versions of the config file.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
These changes make the security drivers able to find and handle the
correct security label information when more than one label is
available. They also update the DAC driver to be used as an usual
security driver.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the structures that store information about each
domain and each hypervisor to support multiple security labels and
drivers. It also updates all the remaining code to use the new fields.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
For network devices allocated from a network with <forward
mode='hostdev'>, there is a need to add the newly minted hostdev to
the hostdevs array.
In this case we also need to call qemuPrepareHostDevices just for this
one device, as the standard call to initialize all the hostdevs that
were defined directly in the domain's configuration has already been
made by the time we allocate a device from a libvirt network, and thus
have something that needs initializing.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
Setting hard_limit larger than previous swap_hard_limit must fail,
it's not that good if one wants to change the swap_hard_limit
and hard_limit together. E.g.
% virsh memtune rhel6
hard_limit : 1000000
soft_limit : 1000000
swap_hard_limit: 1000000
% virsh memtune rhel6 --hard-limit 1000020 --soft-limit 1000020 \
--swap-hard-limit 1000020 --live
This patch reorder the limits setting to set the swap_hard_limit
first, hard_limit then, and soft_limit last if it's greater than
current swap_hard_limit. And soft_limit first, hard_limit then,
swap_hard_limit last, if not.
The underlying function to set the vlan tag of an SR-IOV network
device was already in place (although an extra patch to save/restore
the original vlan tag was needed), and recent patches added the
ability to configure a vlan tag. This patch just ties those two
together.
An SR-IOV device doesn't support vlan trunking, so if anyone tries to
configure more than a single tag, or set the trunk flag, and error is
logged.
The parameter value for cpuset could be in special format like
"0-10,^7", which is not recognized by cgroup. This patch is to
ensure the cpuset is formatted as expected before passing it to
cgroup. As a side effect, after the patch, it parses the cpuset
early before cgroup setting, to avoid the rollback if cpuset
parsing fails afterwards.
While the QEMU monitor/agent do not want JSON strings pretty
printed, other parts of libvirt might. Instead of hardcoding
QEMU's desired behaviour in virJSONValueToString(), add a
boolean flag to control pretty printing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virtPortProfile is now used by 4 different types of network devices
(NETWORK, BRIDGE, DIRECT, and HOSTDEV), and it's getting cumbersome to
replicate so much code in 4 different places just because each type
has the virtPortProfile in a slightly different place. This patch puts
a single virtPortProfile in a common place (outside the type-specific
union) in both virDomainNetDef and virDomainActualNetDef, and adjusts
the parse and format code (and the few other places where it is used)
accordingly.
Note that when a <virtualport> element is found, the parse functions
verify that the interface is of a type that supports one, otherwise an
error is generated (CONFIG_UNSUPPORTED in the case of <interface>, and
INTERNAL in the case of <actual>, since the contents of <actual> are
always generated by libvirt itself).
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
This patch introduces a new error code VIR_ERR_OPERATION_UNSUPPORTED to
mark error messages regarding operations that failed due to lack of
support on the hypervisor or other than libvirt issues.
The code is first used in reporting error if qemu does not support block
IO tuning variables yielding error message:
error: Unable to get block I/O throttle parameters
error: Operation not supported: block_io_throttle field
'total_bytes_sec' missing in qemu's output
instead of:
error: Unable to get block I/O throttle parameters
error: internal error cannot read total_bytes_sec
The meat of this patch is just moving the calls to
virNWFilterRegisterCallbackDriver from each hypervisor's "register"
function into its "initialize" function. The rest is just code
movement to allow that, and a new virNWFilterUnRegisterCallbackDriver
function to undo what the register function does.
The long explanation:
There is an array in nwfilter called callbackDrvArray that has
pointers to a table of functions for each hypervisor driver that are
called by nwfilter. One of those function pointers is to a function
that will lock the hypervisor driver. Entries are added to the table
by calling each driver's "register" function, which happens quite
early in libvirtd's startup.
Sometime later, each driver's "initialize" function is called. This
function allocates a driver object and stores a pointer to it in a
static variable that was previously initialized to NULL. (and here's
the important part...) If the "initialize" function fails, the driver
object is freed, and that pointer set back to NULL (but the entry in
nwfilter's callbackDrvArray is still there).
When the "lock the driver" function mentioned above is called, it
assumes that the driver was successfully loaded, so it blindly tries
to call virMutexLock on "driver->lock".
BUT, if the initialize never happened, or if it failed, "driver" is
NULL. And it just happens that "lock" is always the first field in
driver so it is also NULL.
Boom.
To fix this, the call to virNWFilterRegisterCallbackDriver for each
driver shouldn't be called until the end of its (*already guaranteed
successful*) "initialize" function, not during its "register" function
(which is currently the case). This implies that there should also be
a virNWFilterUnregisterCallbackDriver() function that is called in a
driver's "shutdown" function (although in practice, that function is
currently never called).
When entering "confirm" phase, we are interested in the value of
cancelled rather then ret variable which was interesting before "finish"
phase and didn't change since then.
Previously, qemu did not respond to monitor commands during migration if
the limit was too high. This prevented us from raising the limit
earlier. The qemu issue seems to be fixed (according to my testing) and
we may remove the 32Mb/s limit.
This patch refactors the JSON parsing function that extracts the block
IO tuning parameters from qemu's output. The most impacting change
concerns the error message that is returned if the reply from qemu does
not contain the needed data. The data for IO parameter tuning were added
in qemu 1.1 and the previous error message was confusing.
This patch also breaks long lines and extracts a multiple time used code
pattern to a macro.
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.
QEMU_CAPS_SCSI_LSI
set the flag when "lsi53c895a", bus PCI, alias "lsi" in
the output of "qemu -device ?"
-device lsi in qemu command line
QEMU_CAPS_VIRTIO_SCSI_PCI
set the flag when "name "virtio-scsi-pci", bus PCI" in
the output of qemu devices query.
-device virtio-scsi-pci in qemu command line
Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds the support to run the QEMU network helper
under unprivileged user. It also adds the support for
attach-interface option in virsh to run under unprivileged
user.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
If there's a memory leak in qemu or qemu is exploited the host's
system will sooner or later start trashing instead of killing
the bad process. This however has impact on performance and other
guests as well. Therefore we should set a reasonable RSS limit
even when user hasn't set any. It's better to be secure by default.
* src/conf/domain_conf.c:
- Add virDomainControllerFind to find controller device by type
and index.
- Add virDomainControllerRemove to remove the controller device
from maintained controler list.
* src/conf/domain_conf.h:
- Declare the two new helpers.
* src/libvirt_private.syms:
- Expose private symbols for the two new helpers.
* src/qemu/qemu_driver.c:
- Support attach/detach controller device persistently
* src/qemu/qemu_hotplug.c:
- Use the two helpers to simplify the codes.
One of our latest commits fbe87126 introduced this nasty typo:
func(vmdef, ...); where func() dereference vmdef->ncontrollers,
and vmdef was initialized to NULL. This leaves us with unconditional
immediate segfault. It should be vm->def instead.
This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.
This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.
Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.
To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
The previous check for YAJL would have many undesirable
consequences, the most important being that it caused the
capabilities XML to lose all <guest> elements. There is
no user visible feedback as to what is wrong in this respect,
merely a syslog message. The empty capabilities causes
libvirtd to then throw away all guest XML configs that are
stored.
This changes the code so that the check for YAJL is only
performed at the time we attempt to spawn a QEMU process
error: Failed to start domain vm-vnc
error: unsupported configuration: this qemu binary requires libvirt to be compiled with yajl
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When sending SIGHUP to libvirtd, it will trigger the virStateDriver
reload operation. This is intended to reload the configuration files
for guests. For unknown historical reasons this is also triggering
autostart of all guests. Autostart is generally expected to be
something that happens on OS startup. Starting VMs on SIGHUP will
violate that expectation and potentially cause dangerous scenarios
if the admin has explicitly shutdown a misbehaving VM that has
been marked as autostart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Even though qemu-kvm binaries can be used in TCG mode, libvirt would
only detect them if /dev/kvm was available. Thus, one would need to make
a /usr/bin/qemu symlink to be able to use TCG mode with qemu-kvm in an
environment without KVM support.
And even though QEMU is able to make use of KVM, libvirt would not
advertise KVM support unless there was a qemu-kvm symlink available.
This patch fixes both issues.
If QEMU supports the BALLOON_EVENT QMP event, then we can
avoid invoking 'query-balloon' when returning XML or the
domain info.
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h:
Add QEMU_CAPS_BALLOON_EVENT
* src/qemu/qemu_driver.c: Skip query-balloon in
qemudDomainGetInfo and qemuDomainGetXMLDesc if we have
QEMU_CAPS_BALLOON_EVENT set
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Check
for BALLOON_EVENT at connect to monitor. Add callback
for balloon change notifications
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h:
Add handling of BALLOON_EVENT and impl 'query-events'
check
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.
V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This is in preparation of the enablement of s390 guests with virtio devices.
The assignment of device addresses happens in different places, i.e. the
qemu driver and process modules as well as in the unit tests in slightly
different flavors. Currently, these are PPC spapr-vio and PCI
devices, virtio-s390 (not PCI based) will follow.
By optionally passing to qemuDomainAssignAddresses the domain
object and the capabilities it is now possible to call the function
from most of the places (except for hotplug) where address assignment
is done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:
if (strstr(def->emulator, "kvm")) {
def->virtType = VIR_DOMAIN_VIRT_KVM;
def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}
Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features
The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother). So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages. This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.
* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
Recently the Ceph project defaulted auth_supported from 'none' to 'cephx'.
When no auth information was set for Ceph disks this would lead to librados defaulting to
'cephx', but there would be no additional authorization information.
We now explicitly set auth_supported to none when passing down arguments to Qemu.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
QEMU domains were marked as having managed save image even if they were
saved using the regular save. With this patch, domains are marked so
only when using managed save API.
QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.
This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.
Reported-by: Vladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
virDomainBlockStatsFlags can't collect total_time_ns for read/write/flush
because of key typo when retriveing from qemu cmd result
Signed-off-by: lvroyce <lvroyce@linux.vnet.ibm.com>
Starting a KVM guest on s390 fails immediately. This is because
"qemu --help" reports -no-acpi even for the s390(x) architecture but
-no-acpi isn't supported there.
Workaround is to remove QEMU_CAPS_NO_ACPI from the capability set
after the version/capability extraction.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If no 'listen' attribute or <listen> element is set in the
guest XML, the default driver configured listen address is
used. There is no way to client applications to determine
what this address is though. When starting the guest, we
should update the live XML to include this default listen
address
This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.
For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.
The two new functions are very similar to the existing functions;
just a matter of different arguments and a call to a different
helper function.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Support new flags.
(qemuDomainListAllSnapshots): New functions.
Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point. This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.
* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.
This idea was first suggested by Daniel Veillard here:
https://www.redhat.com/archives/libvir-list/2011-October/msg00353.html
Now that I am about to add more complexity to snapshot listing, it
makes sense to avoid code duplication and special casing for domain
listing (all snapshots) vs. snapshot listing (descendants); adding
a metaroot reduces the number of code lines by having the domain
listing turn into a descendant listing of the metaroot.
Note that this has one minor pessimization - if we are going to list
ALL snapshots without filtering, then virHashForeach is more efficient
than recursing through the child relationships; restoring that minor
optimization will occur in the next patch.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Repurpose some fields.
(virDomainSnapshotDropParent): Drop unused parameter.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListCount): Simplify.
(virDomainSnapshotFindByName, virDomainSnapshotSetRelations)
(virDomainSnapshotDropParent): Match new field semantics.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Adjust clients.
This patch stores existence of the image in the object. At start of the
daemon the state is checked and then updated in key moments in domain
lifecycle.
With latest changes to qemu-ga success on some commands is not reported
anymore, e.g. guest-shutdown or guest-suspend-*. However, errors are
still being reported. Therefore, we need to find different source of
indication if operation was successful. Events.
Commit 6e769eba made it a runtime error if libvirt was compiled
without yajl support but targets a new enough qemu. But enough
users are hitting this on self-compiled libvirt that it is worth
erroring out at compilation time, rather than an obscure failure
when trying to use the built executable.
* configure.ac: If qemu is requested and -version works, require
yajl when qemu version is new enough.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Add
comment.
dump-guest-memory is a new dump mechanism, and it can work when the
guest uses host devices. This patch adds a API to use this new
monitor command.
We will always use json mode if qemu's version is >= 0.15, so I
don't implement the API for text mode.
Libvirt updates the configuration of SPICE server only when something
changes. This is unfortunate when the user wants to disconnect a
existing spice session when the connected attribute is already
"disconnect".
This patch modifies the conditions for calling the password updater to
be called when nothing changes, but the connected attribute is already
"disconnect".
While unescaping the commands the commands passed through to the monitor
function qemuMonitorUnescapeArg() initialized lenght of the input string
to strlen()+1 which is fine for alloc but not for iteration of the
string.
This patch fixes the off-by-one error and drops the pointless check for
a single trailing slash that is automaticaly handled by the default
branch of switch.
A core use case of the hook scripts is to be able to do things
to a guest's network configuration. It is possible to hook into
the 'start' operation for a QEMU guest which runs just before
the guest is started. The TAP devices will exist at this point,
but the QEMU process will not. It can be desirable to have a
'started' hook too, which runs once QEMU has started.
If libvirtd is restarted it will re-populate firewall rules,
but there is no QEMU hook to trigger for existing domains.
This is solved with a 'reconnect' hook.
Finally, if attaching to an external QEMU process there needs
to be an 'attach' hook script.
This all also applies to the LXC driver
* docs/hooks.html.in: Document new operations
* src/util/hooks.c, src/util/hooks.c: Add 'started', 'reconnect'
and 'attach' operations for QEMU. Add 'prepare', 'started',
'release' and 'reconnect' operations for LXC
* src/lxc/lxc_driver.c: Add hooks for 'prepare', 'started',
'release' and 'reconnect' operations
* src/qemu/qemu_process.c: Add hooks for 'started', 'reconnect'
and 'reconnect' operations
Currently, if qemuProcessStart fail at some point, e.g. because
domain being started wants a PCI/USB device already assigned to
a different domain, we jump to cleanup label where qemuProcessStop
is performed. This unconditionally calls virSecurityManagerRestoreAllLabel
which is wrong because the other domain is still using those devices.
However, once we successfully label all devices/paths in
qemuProcessStart() from that point on, we have to perform a rollback
on failure - that is - we have to virSecurityManagerRestoreAllLabel.
The two APIs are rather trivial; based on bits and pieces of other
existing APIs. It leaves the door open for future extension to
qemu to report snapshots without metadata based on reading qcow2
internal snapshot names.
* src/qemu/qemu_driver.c (qemuDomainSnapshotIsCurrent)
(qemuDomainSnapshotHasMetadata): New functions.
For pseries guest, spapr-vlan and spapr-vty is based
on spapr-vio address. According to model of network
device, the address type should be assigned automatically.
For serial device, serial pty device is recognized as
spapr-vty device, which is also on spapr-vio.
So this patch is to correct the address type of
spapr-vlan and spapr-vty, and build correct
command line of spapr-vty.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman<michaele@au1.ibm.com>
When libvirtd is started and there is an unusable/not-connectable
leftover from earlier started machine, it's more reasonable to say
that the machine "crashed" if we know it was started with
"-no-shutdown".
This patch fixes that and also changes the other result (when machine
was started without "-no-shutdown") to "unknown", because the previous
"failed" reason means (according to include/libvirt/libvirt.h.in:174),
that the machine failed to start.
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.
This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
The problem is that an interface with type='hostdev' will have an
alias of the form "hostdev%d", while the function that looks through
existing netdevs to determine the name to use for a new addition will
fail if there's an existing entry that does not match the form
"net%d".
This is another of the handful of places that need an exception due to
the hybrid nature of <interface type='hostdev'> (which is not exactly
an <interface> or a <hostdev>, but is both at the same time).
If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().
Bug present since 0.9.5 (commit 326176179).
==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240== by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240== by 0x509C677: virVasprintf (stdio2.h:199)
==3240== by 0x509C733: virAsprintf (util.c:1912)
==3240== by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240== by 0x511991D: virStateInitialize (libvirt.c:809)
==3240== by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240== by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240== by 0x7953D8F: start_thread (pthread_create.c:309)
==3240== by 0x805FF5C: clone (clone.S:115)
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.
To address this, the augeas test cases need to be auto-generated
from the example config files.
* build-aux/augeas-gentest.pl: Helper to generate an
augeas test file, substituting in elements from the
example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
src/locking/test_libvirt_sanlock.aug,
src/locking/test_libvirt_sanlock.aug.in,
src/lxc/test_libvirtd_lxc.aug,
src/lxc/test_libvirtd_lxc.aug.in,
src/qemu/test_libvirtd_qemu.aug,
src/qemu/test_libvirtd_qemu.aug.in: Remove example
config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all the config options are listed under a 'vnc_entry'
group. Create a bunch of new groups & move options to the
right place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of doing
# example_config
use
#example_config
so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions
Also delete rogue trailing comma not allowed by lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If vdsm is installed and configured in Fedora 17, we add the following
items into qemu.conf:
spice_tls=1
spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
However, after this changes, augtool cannot identify qemu.conf anymore.
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it
* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
in probes.d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The pciDevice structure corresponding to the device being hot-unplugged
was freed after it was "stolen" from activeList. The pointer was still
used for eg-inactive list. This patch removes the free of the structure
and frees it only if reset fails on the device.
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues
Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):
Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
calls to virDomainEventStateDeregisterConn
This involves setting the cpuacct cgroup to a per-vcpu granularity,
as well as summing the each vcpu accounting into a common array.
Now that we are reading more than one cgroup file, we double-check
that cpus weren't hot-plugged between reads to invalidate our
summing.
Signed-off-by: Eric Blake <eblake@redhat.com>
If qemuPrepareHostdevUSBDevices fail it will roll back devices added
to the driver list of used devices. However, if it may fail because
the device is being used already. But then again - with roll back.
Therefore don't try to remove a usb device manually if the function
fail. Although, we want to remove the device if any operation
performed afterwards fail.
One of our latest USB device handling patches
05abd1507d introduced a regression.
That is, we first create a temporary list of all USB devices that
are to be used by domain just starting up. Then we iterate over and
check if a device from the list is in the global list of currently
assigned devices (activeUsbHostdevs). If not, we add it there and
continue with next iteration then. But if a device from temporary
list is either taken already or adding to the activeUsbHostdevs fails,
we remove all devices in temp list from the activeUsbHostdevs list.
Therefore, if a device is already taken we remove it from
activeUsbHostdevs even if we should not. Thus, next time we allow
the device to be assigned to another domain.
To allow the security drivers to apply different configuration
information per hypervisor, pass the virtualization driver name
into the security manager constructor.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.
The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.
Currently each USB2 companion controller gets put on a separate
PCI slot. Not only is this wasteful of PCI slots, but it is not
in compliance with the spec for USB2 controllers. The master
echi1 and all companion controllers should be in the same slot,
with echi1 in function 7, and uhci1-3 in functions 0-2 respectively.
* src/qemu/qemu_command.c: Special case handling of USB2 controllers
to apply correct pci slot assignment
* tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args,
tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand
test to cover automatic slot assignment
Like for 'static' placement, when the memory policy mode is
'strict', set the memory policy by writing the advisory nodeset
returned from numad to cgroup file cpuset.mems,
On some of the NUMA platforms, the CPU index in each NUMA node
grows non-consecutive. While on other platforms, it can be inconsecutive,
E.g.
% numactl --hardware
available: 4 nodes (0-3)
node 0 cpus: 0 4 8 12 16 20 24 28
node 0 size: 131058 MB
node 0 free: 86531 MB
node 1 cpus: 1 5 9 13 17 21 25 29
node 1 size: 131072 MB
node 1 free: 127070 MB
node 2 cpus: 2 6 10 14 18 22 26 30
node 2 size: 131072 MB
node 2 free: 127758 MB
node 3 cpus: 3 7 11 15 19 23 27 31
node 3 size: 131072 MB
node 3 free: 127226 MB
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This patch is to fix the problem by using the CPU index in
caps->host.numaCell[i]->cpus[i] to set the bitmask instead of
assuming the CPU index of the NUMA nodes are always sequential.
For pseries guest, the default controller model is
ibmvscsi controller, this controller only can work
on spapr-vio address.
This patch is to assign spapr-vio address type to
ibmvscsi controller and correct vscsi test case.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Commit cdce2f42d tried to silence a compiler warning on 32-bit builds,
but the gcc shipped with RHEL 5 is old enough that the type conversion
via multiplication by 1 was insufficient for the task.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Previous attempt
didn't get past all gcc versions.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
This patch lifts the limit of calling thread detection code only on KVM
guests. With upstream qemu the thread mappings are reported also on
non-KVM machines.
QEMU adopted the thread_id information from the kvm branch.
To remain compatible with older upstream versions of qemu the check is
attempted but the failure to detect threads (or even run the monitor
command - on older versions without SMP support) is treated non-fatal
and the code reports one vCPU with pid of the hypervisor (in same
fashion this was done on non-KVM guests).
After a cpu hotplug the qemu driver did not refresh information about
virtual processors used by qemu and their corresponding threads. This
patch forces a re-detection as is done on start of QEMU.
This ensures that correct information is reported by the
virDomainGetVcpus API and "virsh vcpuinfo".
A failure to obtain the thread<->vcpu mapping is treated non-fatal and
the mapping is not updated in a case of failure as not all versions of
QEMU report this in the info cpus command.
This patch changes a switch statement into ifs when handling live vs.
configuration modifications getting rid of redundant code in case when
both live and persistent configuration gets changed.
when failing to attach another usb device to a domain for some reason
which has one use device attached before, the libvirtd crashed.
The crash is caused by null-pointer dereference error in invoking
usbDeviceListSteal passed in NULL value usb variable.
commit 05abd1507d introduces the bug.
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
It turns out that when cgroups are enabled, the use of a block device
for a snapshot target was failing with EPERM due to libvirt failing
to add the block device to the cgroup whitelist. See also
https://bugzilla.redhat.com/show_bug.cgi?id=810200
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive): Account for cgroup.
(qemuDomainSnapshotCreateDiskActive): Update caller.
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).
RHBZ: 819499
Signed-off-by: Alon Levy <alevy@redhat.com>
src/qemu/qemu_hostdev.c:
refactor qemuPrepareHostdevUSBDevices function, make it focus on
adding usb device to activeUsbHostdevs after check. After that,
the usb hotplug function qemuDomainAttachHostDevice also could use
it.
expand qemuPrepareHostUSBDevices to perform the usb search,
rollback on failure.
src/qemu/qemu_hotplug.c:
If there are multiple usb devices available with same vendorID and productID,
but with different value of "bus, device", we give an error to let user
use <address> to specify the desired one.
usbFindDevice():get usb device according to
idVendor, idProduct, bus, device
it is the exact match of the four parameters
usbFindDeviceByBus():get usb device according to bus, device
it returns only one usb device same as usbFindDevice
usbFindDeviceByVendor():get usb device according to idVendor,idProduct
it probably returns multiple usb devices.
usbDeviceSearch(): a helper function to do the actual search
When we added the default USB controller into domain XML, we efficiently
broke migration to older versions of libvirt that didn't support USB
controllers at all (0.9.4 and earlier) even for domains that don't use
anything that the older libvirt can't provide. We still want to present
the default USB controller in any XML seen by a user/app but we can
safely remove it from the domain XML used during migration. If we are
migrating to a new enough libvirt, it will add the controller XML back,
while older libvirt won't be confused with it although it will still
tell qemu to create the controller.
Similar approach can be used in the future whenever we find out we
always enabled some kind of device without properly advertising it in
domain XML.
Commit 4c82f09e added a capability check for qemu per-device io
throttling, but only applied it to domain startup. As mentioned
in the previous commit (98cec05), the user can still get an 'internal
error' message during a hotplug attempt, when the monitor command
doesn't exist. It is confusing to allow tuning on inactive domains
only to then be rejected when starting the domain.
* src/qemu/qemu_driver.c (qemuDomainSetBlockIoTune): Reject
offline tuning if online can't match it.
If you have a qemu build that lacks the blockio tune monitor command,
then this command:
$ virsh blkdeviotune rhel6u2 hda --total_bytes_sec 1000
error: Unable to change block I/O throttle
error: internal error Unexpected error
fails as expected (well, the error message is lousy), but the next
dumpxml shows that the domain was modified anyway. Worse, that means
if you save the domain then restore it, the restore will likely fail
due to throttling being unsupported, even though no throttling should
even be active because the monitor command failed in the first place.
* src/qemu/qemu_driver.c (qemuDomainSetBlockIoTune): Check for
error before making modification permanent.
Error: RESOURCE_LEAK:
/libvirt/src/qemu/qemu_driver.c:6968:
alloc_fn: Calling allocation function "calloc".
/libvirt/src/qemu/qemu_driver.c:6968:
var_assign: Assigning: "nodeset" = storage returned from "calloc(1UL, 1UL)".
/libvirt/src/qemu/qemu_driver.c:6977:
noescape: Variable "nodeset" is not freed or pointed-to in function "virTypedParameterAssign".
/libvirt/src/qemu/qemu_driver.c:6997:
leaked_storage: Variable "nodeset" going out of scope leaks the storage it points to.
On 32-bit platforms, gcc warns that the comparison between a long
and (ULLONG_MAX/1024/1024) is always false; throwing in a type
conversion shuts up the warning.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Shut gcc up.
This works with newer qemu that doesn't allow escaping spaces.
It's backwards compatible as well.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
When libvirtd is started, we create "libvirt/qemu" directories under
hugetlbfs mount point. Only the "qemu" subdirectory is chowned to qemu
user and "libvirt" remains owned by root. If umask was too restrictive
when libvirtd started, qemu user may lose access to "qemu"
subdirectory. Let's explicitly grant search permissions to "libvirt"
directory for all users.
Currently, qemu GA is not providing 'desc' field for errors like
we are used to from qemu monitor. Therefore, we fall back to this
general 'unknown error' string. However, GA is reporting 'class' which
is not perfect, but much more helpful than generic error string.
Thus we should fall back to class firstly and if even no class
is presented, then we can fall back to that generic string.
Before this patch:
virsh # dompmsuspend --target mem f16
error: Domain f16 could not be suspended
error: internal error unable to execute QEMU command
'guest-suspend-ram': unknown QEMU command error
After this patch:
virsh # dompmsuspend --target mem f16
error: Domain f16 could not be suspended
error: internal error unable to execute QEMU command
'guest-suspend-ram': The command has not been found
More bug extermination in the category of:
Error: CHECKED_RETURN:
/libvirt/src/conf/network_conf.c:595:
check_return: Calling function "virAsprintf" without checking return value (as is done elsewhere 515 out of 543 times).
/libvirt/src/qemu/qemu_process.c:2780:
unchecked_value: No check of the return value of "virAsprintf(&msg, "was paused (%s)", virDomainPausedReasonTypeToString(reason))".
/libvirt/tests/commandtest.c:809:
check_return: Calling function "setsid" without checking return value (as is done elsewhere 4 out of 5 times).
/libvirt/tests/commandtest.c:830:
unchecked_value: No check of the return value of "virTestGetDebug()".
/libvirt/tests/commandtest.c:831:
check_return: Calling function "virTestGetVerbose" without checking return value (as is done elsewhere 41 out of 42 times).
/libvirt/tests/commandtest.c:833:
check_return: Calling function "virInitialize" without checking return value (as is done elsewhere 18 out of 21 times).
One note about the error in commandtest line 809: setsid() seems to fail when running the test -- could be removed ?
With RHEL 6.2, virDomainBlockPull(dom, dev, bandwidth, 0) has a race
with non-zero bandwidth: there is a window between the block_stream
and block_job_set_speed monitor commands where an unlimited amount
of data was let through, defeating the point of a throttle.
This race was first identified in commit a9d3495e, and libvirt was
able to reduce the size of the window for that race. In the meantime,
the qemu developers decided to fix things properly; per this message:
https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg03793.html
the fix will be in qemu 1.1, and changes block-job-set-speed to use
a different parameter name, as well as adding a new optional parameter
to block-stream, which eliminates the race altogether.
Since our documentation already mentioned that we can refuse a non-zero
bandwidth for some hypervisors, I think the best solution is to do
just that for RHEL 6.2 qemu, so that the race is obvious to the user
(anyone using stock RHEL 6.2 binaries won't have this patch, and anyone
building their own libvirt with this patch for RHEL can also rebuild
qemu to get the modern semantics, so it is no real loss in behavior).
Meanwhile the code must be fixed to honor actual qemu 1.1 naming.
Rename the parameter to 'modern', since the naming difference now
covers more than just 'async' block-job-cancel. And while at it,
fix an unchecked integer overflow.
* src/qemu/qemu_monitor.h (enum BLOCK_JOB_CMD): Drop unused value,
rename enum to match conventions.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Reflect enum rename.
* src/qemu_qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Likewise,
and support difference between RHEL 6.2 and qemu 1.1 block pull.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Reject
bandwidth during pull with too-old qemu.
* src/libvirt.c (virDomainBlockPull, virDomainBlockRebase):
Document this.
QEMU binary is called several times when we probe different kinds of
capabilities the binary supports. This patch introduces new common
helper so that all probes use a consistent way of invoking qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=816662 pointed out
that attempting 'virsh blockpull' on an offline domain gave a
misleading error message about qemu lacking support for the
operation, even when qemu was specifically updated to support it.
The real problem is that we have several capabilities that are
only determined when starting a domain, and therefore are still
clear when first working with an inactive domain (namely, any
capability set by qemuMonitorJSONCheckCommands).
While this patch was able to hoist an existing check in one of the
three culprits, it had to add redundant checks in the other two
places (because you always have to check for an active domain after
obtaining a VM job lock, but the capability bits were being checked
prior to obtaining the job lock).
Someday it would be nice to patch libvirt to cache the set of
capabilities per qemu binary (as determined by inode and timestamp),
rather than re-probing the binary every time a domain is started,
and to teach the cache how to query the monitor during the one
time the probe is made rather than having to wait until a guest
is started; then, a capability probe would succeed even for offline
guests because it just refers to the cache, and the single check for
an active domain after grabbing the job lock would be sufficient.
But since that will involve a lot more coding, I'm happy to go
with this simpler solution for an immediate solution.
* src/qemu/qemu_driver.c (qemuDomainPMSuspendForDuration)
(qemuDomainSnapshotCreateXML, qemuDomainBlockJobImpl): Check for
offline state before checking an online-only cap.
Once qemu monitor reports migration has completed, we just closed our
end of the pipe and let migration tunnel die. This generated bogus error
in case we did so before the thread saw EOF on the pipe and migration
was aborted even though it was in fact successful.
With this patch we first wake up the tunnel thread and once it has read
all data from the pipe and finished the stream we close the
filedescriptor.
A small additional bonus of this patch is that real errors reported
inside qemuMigrationIOFunc are not overwritten by virStreamAbort any
more.
When QEMU reported failed or canceled migration, we correctly detected
it but didn't really consider it as an error condition and migration
protocol just went on. Luckily, some of the subsequent steps eventually
failed end we reported an (unrelated and mostly random) error back to
the caller.
In some cases (spotted with broken connection during tunneled migration)
we were overwriting the original error with worse or even misleading
errors generated when we were cleaning up after failed migration.
This patch modifies the CPU comparrison function to report the
incompatibilities in more detail to ease identification of problems.
* src/cpu/cpu.h:
cpuGuestData(): Add argument to return detailed error message.
* src/cpu/cpu.c:
cpuGuestData(): Add passthrough for error argument.
* src/cpu/cpu_x86.c
x86FeatureNames(): Add function to convert a CPU definition to flag
names.
x86Compute(): - Add error message parameter
- Add macro for reporting detailed error messages.
- Improve error reporting.
- Simplify calculation of forbidden flags.
x86DataIteratorInit():
x86cpuidMatchAny(): Remove functions that are no longer needed.
* src/qemu/qemu_command.c:
qemuBuildCpuArgStr(): - Modify for new function prototype
- Add detailed error reports
- Change error code on incompatible processors
to VIR_ERR_CONFIG_UNSUPPORTED instead of
internal error
* tests/cputest.c:
cpuTestGuestData(): Modify for new function prototype
Most of our errors complaining about an inability to support a
particular action due to qemu limitations used CONFIG_UNSUPPORTED,
but we had a few outliers. Reported by Jiri Denemark.
* src/qemu/qemu_command.c (qemuBuildDriveDevStr): Prefer
CONFIG_UNSUPPORTED.
* src/qemu/qemu_driver.c (qemuDomainReboot)
(qemuDomainBlockJobImpl): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciControllerDevice):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup): Likewise.
A "ide-drive" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd"
since commit 1f56e32, and ",media=cdrom" is not required for
ide-cd anymore. "ide-drive" is still supported for backwards
compatibility, but no doubt we should go foward.
A "scsi-disk" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
But upstream qemu splitted "scsi-disk" into "scsi-hd" and
"scsi-cd" since commit b443ae, and ",media=cdrom" is not
required for scsi-cd anymore. "scsi-disk" is still supported
for backwards compatibility, but no doubt we should go
foward.
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Currently, we have 3 boolean arguments we have to pass
to qemuProcessStart(). As libvirt grows it is harder and harder
to remember them and their position. Therefore we should
switch to flags instead.
Instead of returning a CPUs list, numad returns NUMA node
list instead, this patch is to convert the node list to
cpumap before affinity setting. Otherwise, the domain
processes will be pinned only to CPU[$numa_cell_num],
which will cause significiant performance losses.
Also because numad will balance the affinity dynamically,
reflecting the cpuset from numad back doesn't make much
sense then, and it may just could produce confusion for
the users. Thus the better way is not to reflect it back
to XML. And in this case, it's better to ignore the cpuset
when parsing XML.
The codes to update the cpuset is removed in this patch
incidentally, and there will be a follow up patch to ignore
the manually specified "cpuset" if "placement" is "auto",
and document will be updated too.
This patch adds a netlink callback when migrating a VEPA enabled
virtual machine. It fixes a Bug where a VM would not request a port
association when it was cleared by lldpad.
This patch requires the latest git version of lldpad to work.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
If dynamic_ownership is off and we are creating a file on NFS
we force chown. This will fail as chown/chmod are not supported
on NFS. However, with no dynamic_ownership we are not required
to do any chown.
In my testing, I was able to provoke an odd block pull failure:
$ virsh blockpull dom vda --bandwidth 10000
error: Requested operation is not valid: No active operation on device: drive-virtio-disk0
merely by using gdb to artifically wait to do the block job set speed
until after the pull had already finished. But in reality, that should
be a success, since the pull finished before we had a chance to set
speed. Furthermore, using a double job lock is not only annoying, but
a bug in itself - if you do parallel virDomainBlockRebase, and hit
the race window just right, the first call grabs the VM job to start
a fast block job, then the second call grabs the VM job to start
a long-running job with unspecified speed, then the first call finally
regrabs the VM job and sets the speed, which ends up running the
second job under the speed from the first call. By consolidating
things into a single job, we avoid opening that race, as well as reduce
the time between starting the job and changing the speed, for less
likelihood of the speed change happening after block job completion
in the first place.
* src/qemu/qemu_monitor.h (BLOCK_JOB_CMD): Add new mode.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Move secondary
job call...
(qemuDomainBlockJobImpl): ...here, for fewer locks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Change
return value on new internal mode.
Without the VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC flag, libvirt will internally
poll using qemu's "query-block-jobs" API and will not return until the
operation has been completed. API users are advised that this operation
is unbounded and further interaction with the domain during this period
may block. Future patches may refactor things to allow other queries in
parallel with this polling. For older qemu, we synthesize the cancellation
event, since qemu won't generate it.
The choice of polling duration copies from the code in qemu_migration.c.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Probably in the noise, but this will let us scale more efficiently
as we learn to recognize even more qemu events.
* src/qemu/qemu_monitor_json.c (eventHandlers): Sort.
(qemuMonitorEventCompare): New helper function.
(qemuMonitorJSONIOProcessEvent): Optimize event lookup.
RHEL 6.2 was released with an early version of block jobs, which only
worked on the qed file format, where the commands were spelled with
underscore (contrary to QMP style), and where 'block_job_cancel' was
synchronous and did not trigger an event.
The upcoming qemu 1.1 release has fixed these short-comings [1][2]:
the commands now work on multiple file types, are spelled with dash,
and 'block-job-cancel' is asynchronous and emits an event upon conclusion.
[1]qemu commit 370521a1d6f5537ea7271c119f3fbb7b0fa57063
[2]https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg01248.html
This patch recognizes the new spellings, and fixes virDomainBlockRebase
to give a graceful error when talking to a too-old qemu on a partial
rebase attempt. Fixes for the new semantics will come later. This
patch also removes a bogus ATTRIBUTE_NONNULL mistakenly added in
commit 10ec36e2.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC)
(QEMU_CAPS_BLOCKJOB_ASYNC): New bits.
* src/qemu/qemu_capabilities.c (qemuCaps): Name them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
them.
(qemuMonitorJSONBlockJob): Manage both command names.
(qemuMonitorJSONDiskSnapshot): Minor formatting fix.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Alter signature.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Pass through
capability bit.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update callers.
The new safe console handling introduced a possibility to deadlock the
qemu driver when a new console connection forcibly disconnects a
previous console stream that belongs to an already closed connection.
The virStreamFree function calls subsequently a the virReleaseConnect
function that tries to lock the driver while discarding the connection,
but the driver was already locked in qemuDomainOpenConsole.
Backtrace of the deadlocked thread:
0 0x00007f66e5aa7f14 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f66e5aa3411 in _L_lock_500 () from /lib64/libpthread.so.0
2 0x00007f66e5aa322a in pthread_mutex_lock () from/lib64/libpthread.so.0
3 0x0000000000462bbd in qemudClose ()
4 0x00007f66e6e178eb in virReleaseConnect () from/usr/lib64/libvirt.so.0
5 0x00007f66e6e19c8c in virUnrefStream () from /usr/lib64/libvirt.so.0
6 0x00007f66e6e3d1de in virStreamFree () from /usr/lib64/libvirt.so.0
7 0x00007f66e6e09a5d in virConsoleHashEntryFree () from/usr/lib64/libvirt.so.0
8 0x00007f66e6db7282 in virHashRemoveEntry () from/usr/lib64/libvirt.so.0
9 0x00007f66e6e09c4e in virConsoleOpen () from /usr/lib64/libvirt.so.0
10 0x00000000004526e9 in qemuDomainOpenConsole ()
11 0x00007f66e6e421f1 in virDomainOpenConsole () from/usr/lib64/libvirt.so.0
12 0x00000000004361e4 in remoteDispatchDomainOpenConsoleHelper ()
13 0x00007f66e6e80375 in virNetServerProgramDispatch () from/usr/lib64/libvirt.so.0
14 0x00007f66e6e7ae11 in virNetServerHandleJob () from/usr/lib64/libvirt.so.0
15 0x00007f66e6da897d in virThreadPoolWorker () from/usr/lib64/libvirt.so.0
16 0x00007f66e6da7ff6 in virThreadHelper () from/usr/lib64/libvirt.so.0
17 0x00007f66e5aa0c5c in start_thread () from /lib64/libpthread.so.0
18 0x00007f66e57e7fcd in clone () from /lib64/libc.so.6
* src/qemu/qemu_driver.c: qemuDomainOpenConsole()
-- unlock the qemu driver right after acquiring the domain
object
In case an API fails with "cannot acquire state change lock", searching
for the API that possibly forgot to end its job is not always easy.
Let's keep track of the job owner and print it out for easier
identification.
As reported by Daniel Berrangé, we have a huge performance regression
for virDomainGetInfo() due to the change which makes virDomainEndJob()
save the XML status file every time it is called. Previous to that
change, 2000 calls to virDomainGetInfo() took ~2.5 seconds. After that
change, 2000 calls to virDomainGetInfo() take 2 *minutes* 45 secs.
We made the change to be able to recover from libvirtd restart in the
middle of a job. However, only destroy and async jobs are taken care of.
Thus it makes more sense to only save domain state XML when these jobs
are started/stopped.
* src/qemu/qemu_command.c: Wire up -bios with <loader>
* tests/qemuxml2argvdata/qemuxml2argv-bios.args,
tests/qemuxml2argvdata/qemuxml2argv-bios.xml: Expand
existing BIOS test case to cover <loader>
Leak introduced in commit 0436d32. If we allocate an actions array,
but fail early enough to never consume it with the qemu monitor
transaction call, we leaked memory.
But our semantics of making the transaction command free the caller's
memory is awkward; avoiding the memory leak requires making every
intermediate function in the call chain check for error. It is much
easier to fix things so that the function that allocates also frees,
while the call chain leaves the caller's data intact. To do that,
I had to hack our JSON data structure to make it easy to protect a
portion of an arbitrary JSON tree from being freed.
* src/util/json.h (virJSONType): Name the enum.
(_virJSONValue): New field.
* src/util/json.c (virJSONValueFree): Use it to protect a portion
of an array.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONTransaction): Avoid
freeing caller's data.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Free actions array on failure.
We can tell qemuDomainSnapshotFSThaw if we want it to report errors or
not. However, if we don't want to and an error has been already set by
previous qemuReportError() we must keep copy of that error not just a
pointer to it. Otherwise, it get overwritten if FSThaw reports an error.
If the daemon is restarted it will lose list of active
USB devices assigned to active domains. Therefore we need
to rebuild this list on qemuProcessReconnect().
To prevent assigning one USB device to two domains,
we keep a list of assigned USB devices. On domain
startup - qemuProcessStart() - we insert devices
used by domain into the list but remove them only
on detach-device. Devices are, however, released
on qemuProcessStop() as well.
Originally, qemuDomainCheckEjectableMedia was entering monitor with qemu
driver lock. Commit 2067e31bf9, which I
made to fix that, revealed another issue we had (but didn't notice it
since the driver was locked): we didn't set nested job when
qemuDomainCheckEjectableMedia is called during migration. Thus the
original fix I made was wrong.
Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.
Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.
Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.
Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
If we round up a user's memory request, we should update the XML
to reflect the actual value in use by the VM, rather than giving
an artificially small value back to the user.
* src/qemu/qemu_command.c (qemuBuildNumaArgStr)
(qemuBuildCommandLine): Reflect rounding back to XML.
This patch was created to resolve this upstream bug:
https://bugzilla.redhat.com/show_bug.cgi?id=784767
and is at least a partial solution to this RHEL RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
Previously the only attribute of a network device that could be
modified by virUpdateDeviceFlags() ("virsh update-device") was the
link state; attempts to change any other attribute would log an error
and fail.
This patch adds recognition of a change in bridge device name, and
supports reconnecting the guest's interface to the new device.
Standard audit logs for detaching and attaching a network device are
also generated. Although the current auditing function doesn't log the
bridge being attached to, this will later be changed in a separate
patch.
qemuBuildHostNetStr had a switch-within-a-switch where both were
looking at the same variable. This was apparently to take advantage of
code common to three different cases (while also taking care of some
code that was different). However, there were only 2 lines common to
all, one of those can be eliminated by merging it into the
virAsprintfs that are in each case. On top of that, all the extra
empty cases cause Coverity complaints (because they are unreachable),
but absence of the empty cases causes a compile error due to
"enumeration value not handled in switch".
The solution is to just make each toplevel case independent, folding
in the common code to each.
commit b0e2bb33 set a default value for the SPICE agent channel by
inserting it during parsing of the channel XML. That method of setting
a default is problematic because it makes a format/parse roundtrip
unclean, and experience with setting other values as a side effect of
parsing has led to headaches (e.g. automatically setting a MAC address
in the parser when one isn't specified in the input XML).
This patch does not revert commit b0e2bb33 (it will be reverted in a
separate patch) but adds the alternate implementation of simply
inserting the default value in the appropriate place on the qemu
commandline when no value is provided.
If we issue guest command and GA is not running, the issuing thread
will block endlessly. We can check for GA presence by issuing
guest-sync with unique ID (timestamp). We don't want to issue real
command as even if GA is not running, once it is started, it process
all commands written to GA socket.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
In the current V3 migration protocol, Libvirt does not
check the result of the function
qemuMigrationVPAssociatePortProfiles
This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.
With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.
Signed-off by: Christian Benvenuti <benve@cisco.com>
Commit d42a2ff caused a regression in creating a disk-only snapshot
of a qcow2 disk; by passing the wrong variable to the monitor call,
libvirt ended up creating JSON that looked like "format":null instead
of the intended "format":"qcow2".
To make it easier to diagnose this in the future, make JSON creation
error out if "s:arg" is paired with NULL (it is still possible to
use "n:arg" in the rare cases where qemu will accept a null).
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Pass correct value.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Improve error message.
When libvirtd is restarted, also restart the netlink event
message callbacks for existing VEPA connections and send
a message to lldpad for these existing links, so it learns
the new libvirtd pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This avoids possible deadlock of the qemu driver in case a domain is
begin migrated (in Begin phase) and unrelated connection to qemu driver
is closed at the right time.
I checked all callers of qemuDomainCheckEjectableMedia() and they are
calling this function with qemu driver locked.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). Since
the consumer of the qemuProcessReconnectData doesn't assume that the
other fields of the struct are initialized (although it uses them
internally), the simpler solution is to just switch to C99-style
struct initialization (which doesn't require specification of all
fields).
libvirt always adds -Werror-frame-larger-than=4096 to the flags when
it builds. When building on Fedora 17, two functions with multiple
1024 buffers declared inside if {} blocks would generate frame size
errors; apparently the version of gcc on Fedora 16 will merge these
multiple buffers into a single buffer even when optimization is off,
but Fedora 17 won't.
The fix is to declare a single 1024 buffer at the top of the two
offending functions, and reuse the single buffer throughout the
functions.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
The oVirt developers have stated that the real reasons they want
to have qemu reuse existing volumes when creating a snapshot are:
1. the management framework is set up so that creation has to be
done from a central node for proper resource tracking, and having
libvirt and/or qemu create things violates the framework, and
2. qemu defaults to creating snapshots with an absolute path to
the backing file, but oVirt wants to manage a backing chain that
uses just relative names, to allow for easier migration of a chain
across storage locations.
When 0.9.10 added VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT (commit
4e9953a4), it only addressed point 1, but libvirt was still using
O_TRUNC which violates point 2. Meanwhile, the new qemu
'transaction' monitor command includes a new optional mode argument
that will force qemu to reuse the metadata of the file it just
opened (with the burden on the caller to have valid metadata there
in the first place). So, this tweaks the meaning of the flag to
cover both points as intended for use by oVirt. It is not strictly
backward-compatible to 0.9.10 behavior, but it can be argued that
the O_TRUNC of 0.9.10 was a bug.
Note that this flag is all-or-nothing, and only selects between
'existing' and the default 'absolute-paths'. A more flexible
approach that would allow per-disk selections, as well as adding
support for the 'no-backing-file' mode, would be possible by
extending the <domainsnapshot> xml to have a per-disk mode, but
until we have a management application expressing a need for that
additional complexity, it is not worth doing.
* src/libvirt.c (virDomainSnapshotCreateXML): Tweak documentation.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): Add
parameters.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Pass them
through.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot): Use
new monitor command arguments.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Adjust callers.
(qemuDomainSnapshotDiskPrepare): Allow qed, modify rules on reuse.
The hardest part about adding transactions is not using the new
monitor command, but undoing the partial changes we made prior
to a failed transaction.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
transaction when available.
(qemuDomainSnapshotUndoSingleDiskActive): New function.
(qemuDomainSnapshotCreateSingleDiskActive): Pass through actions.
(qemuDomainSnapshotCreateXML): Adjust caller.
QEmu 1.1 is adding a 'transaction' command to the JSON monitor.
Each element of a transaction corresponds to a top-level command,
with the additional guarantee that the transaction flushes all
pending I/O, then guarantees that all actions will be successful
as a group or that failure will roll back the state to what it
was before the monitor command. The difference between a
top-level command:
{ "execute": "blockdev-snapshot-sync", "arguments":
{ "device": "virtio0", ... } }
and a transaction:
{ "execute": "transaction", "arguments":
{ "actions": [
{ "type": "blockdev-snapshot-sync", "data":
{ "device": "virtio0", ... } } ] } }
is just a couple of changed key names and nesting the shorter
command inside a JSON array to the longer command. This patch
just adds the framework; the next patch will actually use a
transaction.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommand): Move
guts...
(qemuMonitorJSONMakeCommandRaw): ...into new helper. Add support
for array element.
(qemuMonitorJSONTransaction): New command.
(qemuMonitorJSONDiskSnapshot): Support use in a transaction.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot): Add
argument.
(qemuMonitorJSONTransaction): New declaration.
* src/qemu/qemu_monitor.h (qemuMonitorTransaction): Likewise.
(qemuMonitorDiskSnapshot): Add argument.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction): New wrapper.
(qemuMonitorDiskSnapshot): Pass argument on.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Update caller.
Taking an external snapshot of just one disk is atomic, without having
to pause and resume the VM. This also paves the way for later patches
to interact with the new qemu 'transaction' monitor command.
The various scenarios when requesting atomic are:
online, 1 disk, old qemu - safe, allowed by this patch
online, more than 1 disk, old qemu - failure, this patch
offline snapshot - safe, once a future patch implements offline disk snapshot
online, 1 or more disks, new qemu - safe, once future patch uses transaction
Taking an online system checkpoint snapshot is atomic, since it is
done via a single 'savevm' monitor command. Taking an offline system
checkpoint snapshot is atomic, thanks to the previous patch.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new flag for single-disk setups.
(qemuDomainSnapshotDiskPrepare): Check for atomic here.
(qemuDomainSnapshotCreateDiskActive): Skip pausing the VM when
atomic supported.
(qemuDomainSnapshotIsAllowed): Use bool instead of int.
Offline internal snapshots can be rolled back with just a little
bit of refactoring, meaning that we are now automatically atomic.
* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Move
guts...
(qemuDomainSnapshotForEachQcow2Raw): ...to new helper, to allow
rollbacks.
We need a capability bit to gracefully error out if some of the
additions in future patches can't be implemented by the running qemu.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_TRANSACTION): New cap.
* src/qemu/qemu_capabilities.c (qemuCaps): Name it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
it.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This is similiar with physical world, one will be surprised if the
box starts with medium exists while the tray is open.
New tests are added, tests disk-{cdrom,floppy}-tray are for the qemu
supports "-device" flag, and disk-{cdrom,floppy}-no-device-cap are
for old qemu, i.e. which doesn't support "-device" flag.
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr
* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a client which started non-p2p migration dies in a bad time, the
source libvirtd never clears the migration job and almost nothing can be
done with the domain without restarting the daemon. This patch makes use
of connection close callbacks and ensures that migration job is properly
discarded when the client disconnects.
Destination daemon should not rely on the client or source daemon
(depending on the type of migration) to call Finish when migration
fails, because the client may crash before it can do so. The domain
prepared for incoming migration is set to be destroyed (and migration
job cleaned up) when connection with the client closes but this is not
enough. If the associated qemu process crashes after Prepare step and
the domain is cleaned up before the connection gets closed, autodestroy
is not called for the domain and migration jobs remains set. In case the
domain is defined on destination host (i.e., it is not completely
removed once destroyed) we keep the job set for ever. To fix this, we
register a cleanup callback which is responsible to clean migration-in
job when a domain dies anywhere between Prepare and Finish steps. Note
that we can't blindly clean any job when spotting EOF on monitor since
normally an API is running at that time.
This reverts commit 61f2b6ba5f and most of
commit d8916dc8e2, which effectively
brings back commit ef1065cf5a written by
Jim Fehlig:
The qemu migration speed default is 32MiB/s as defined in migration.c
/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);
There's no need to throttle migration when targeting a file, so set
migration speed to unlimited prior to migration, and restore to libvirt
default value after migration.
Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.
This was reverted because migration to file could not be canceled and
even monitored since qemu was not processing any monitor commands until
the migration finished. This is now different as we make sure the
file descriptor we pass to qemu is able to properly report EAGAIN.
Recent qemu changes might have helped as well.
I tested managedsave with this patch in and indeed, it is 10x faster
while I can still monitor its progress.
If a guest is paused, we were silently ignoring the quiesce flag,
which results in unclean snapshots, contrary to the intent of the
flag. Since we can't quiesce without guest agent support, we should
instead fail if the guest is not running.
Meanwhile, if we attempt a quiesce command, but the guest agent
doesn't respond, and we time out, we may have left the command
pending on the guest's queue, and when the guest resumes parsing
commands, it will freeze even though our command is no longer
around to issue a thaw. To be safe, we must _always_ pair every
quiesce call with a counterpart thaw, even if the quiesce call
failed due to a timeout, so that if a guest wakes up and starts
processing a command backlog, it will not get stuck in a frozen
state.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Always issue thaw after a quiesce, even if quiesce failed.
(qemuDomainSnapshotFSThaw): Add a parameter.
A common coding pattern for changing blkio parameters is
1. virDomainGetBlkioParameters
2. change one or more params
3. virDomainSetBlkioParameters
For this to work, it must be possible to roundtrip through
the methods without error. Unfortunately virDomainGetBlkioParameters
will return "" for the deviceWeight parameter for guests by default,
which virDomainSetBlkioParameters will then reject as invalid.
This fixes the handling of "" to be a no-op, and also improves the
error message to tell you what was invalid
Wire up the domain graphics event notifications for SPICE. Adapted
from a RHEL-only patch written by Dan Berrange that used custom
__com.redhat_SPICE events - equivalent events are now available in
upstream QEMU (including a SPICE_CONNECTED event, which was missing in
the __COM.redhat_SPICE version).
* src/qemu/qemu_monitor_json.c: Wire up SPICE graphics events
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
With current code, we pass true iff domain is cold booting. However,
if disk is inaccessible and startupPolicy for that disk is set to
'requisite' we have to fail iff cold booting.
Even though we say in documentation setting (tls-)port to -1 is legacy
compat style for enabling autoport, we're roughly doing this for VNC.
However, in case of SPICE auto enable autoport iff both port & tlsPort
are equal -1 as documentation says autoport plays with both.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
When host-model and host-passthrouh CPU modes were introduced, qemu
driver was properly modify to update guest CPU definition during
migration so that we use the right CPU at the destination. However,
similar treatment is needed for (managed)save and snapshots since they
need to save the exact CPU so that a domain can be properly restored.
To avoid repetition of such situation, all places that need live XML
share the code which generates it.
As a side effect, this patch fixes error reporting from
qemuDomainSnapshotWriteMetadata().
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
If there is a disk file with a comma in the name, QEmu expects a double
comma instead of a single one (e.g., the file "virtual,disk.img" needs
to be specified as "virtual,,disk.img" in QEmu's command line). This
patch fixes libvirt to work with that feature. Fix RHBZ #801036.
Based on an initial patch by Crístian Viana.
* src/util/buf.h (virBufferEscape): Alter signature.
* src/util/buf.c (virBufferEscape): Add parameter.
(virBufferEscapeSexpr): Fix caller.
* src/qemu/qemu_command.c (qemuBuildRBDString): Likewise. Also
escape commas in file names.
(qemuBuildDriveStr): Escape commas in file names.
* docs/schemas/basictypes.rng (absFilePath): Relax RNG to allow
commas in input file names.
* tests/qemuxml2argvdata/*-disk-drive-network-sheepdog.*: Update
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
If user hasn't supplied any tlsPort we default to setting it
to zero in our internal structure. However, when building command
line we test it against -1 which is obviously wrong.
This function was freeing a virDomainNetDef with
VIR_FREE(). virDomainNetDef is a complex structure with many pointers
to other dynamically allocated data; to properly free it
virDomainNetDefFree() must be called instead, otherwise several
strings (and potentially other things) will be leaked.
For some reason, although live hotplug of <hostdev> devices is
supported, persistent hotplug is not. This patch adds the proper
VIR_DOMAIN_DEVICE_HOSTDEV cases to the switches in
qemuDomainAttachDeviceConfig and qemuDomainDetachDeviceConfig.
There are several functions in domain_conf.c that remove a device
object from the domain's list of that object type, but don't free the
object or return it to the caller to free. In many cases this isn't a
problem because the caller already had a pointer to the object and
frees it afterward, but in several cases the removed object was just
left floating around with no references to it.
In particular, the function qemuDomainDetachDeviceConfig() calls
functions to locate and remove net (virDomainNetRemoveByMac), disk
(virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove())
devices, but neither it nor its caller qemuDomainModifyDeviceConfig()
ever obtain a pointer to the device being removed, much less free it.
This patch modifies the following "remove" functions to return a
pointer to the device object being removed from the domain device
arrays, to give the caller the option of freeing the device object
using that pointer if needed. In places where the object was
previously leaked, it is now freed:
virDomainDiskRemove
virDomainDiskRemoveByName
virDomainNetRemove
virDomainNetRemoveByMac
virDomainHostdevRemove
virDomainLeaseRemove
virDomainLeaseRemoveAt
The functions that had been leaking:
libxlDomainDetachConfig - leaked a virDomainDiskDef
qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef,
a virDomainNetDef, or a
virDomainLeaseDef
qemuDomainDetachLease - leaked a virDomainLeaseDef
There were certain paths through the hostdev detach code that could
lead to the lower level function failing (and not removing the object
from the domain's hostdevs list), but the higher level function
free'ing the hostdev object anyway. This would leave a stale
hostdevdef pointer in the list, which would surely cause a problem
eventually.
This patch relocates virDomainHostdevRemove from the lower level
functions qemuDomainDetachThisHostDevice and
qemuDomainDetachHostPciDevice, to their caller
qemuDomainDetachThisHostDevice, placing it just before the call to
virDomainHostdevDefFree. This makes it easy to verify that either both
operations are done, or neither.
NB: The "dangling pointer" part of this problem was introduced in
commit 13d5a6, so it is not present in libvirt versions prior to
0.9.9. Earlier versions would return failure in certain cases even
though the the device object was removed/deleted, but the removal and
deletion operations would always both happen or neither.
This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.
ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}
V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).
Some members are generated during XML parse (e.g. MAC address of
an interface); However, with current implementation, if we
are plugging a device both to persistent and live config,
we parse given XML twice: first time for live, second for config.
This is wrong then as the second time we are not guaranteed
to generate same values as we did for the first time.
To prevent that we need to create a copy of DeviceDefPtr;
This is done through format/parse process instead of writing
functions for deep copy as it is easier to maintain:
adding new field to any virDomain*DefPtr doesn't require change
of copying function.
Currently, startupPolicy='requisite' was determining cold boot
by migrateFrom != NULL. That means, if domain was started up
with migrateFrom set we didn't require disk source path and allowed
it to be dropped. However, on snapshot-revert domain wasn't migrated
but according to documentation, requisite should drop disk source
as well.
Using 'unsigned long' for memory values is risky on 32-bit platforms,
as a PAE guest can have more than 4GiB memory. Our API is
(unfortunately) locked at 'unsigned long' and a scale of 1024, but
the rest of our system should consistently use 64-bit values,
especially since the previous patch centralized overflow checking.
* src/conf/domain_conf.h (_virDomainDef): Always use 64-bit values
for memory. Change hugepage_backed to a bool.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefCheckABIStability, virDomainDefFormatInternal): Fix
clients.
* src/vmx/vmx.c (virVMXFormatConfig): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr, xenFormatSxpr): Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetULongLong): New function.
(xenXMConfigGetULong, xenXMConfigSetInt): Avoid truncation.
(xenParseXM, xenFormatXM): Fix clients.
* src/phyp/phyp_driver.c (phypBuildLpar): Likewise.
* src/openvz/openvz_driver.c (openvzDomainSetMemoryInternal):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* src/qemu/qemu_monitor.h (qemuMonitorGetBalloonInfo): Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainGetXMLDesc): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLine): Likewise.
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
Overflow can be user-induced, so it deserves more than being called
an internal error. Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).
* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
The RPC code assumed that the array returned by the driver would be
fully populated; that is, ncpus on entry resulted in ncpus * return
value on exit. However, while we don't support holes in the middle
of ncpus, we do want to permit the case of ncpus on entry being
longer than the array returned by the driver (that is, it should be
safe for the caller to pass ncpus=128 on entry, and the driver will
stop populating the array when it hits max_id).
Additionally, a successful return implies that the caller will then
use virTypedParamArrayClear on the entire array; for this to not
free uninitialized memory, the driver must ensure that all skipped
entries are explicitly zeroed (the RPC driver did this, but not
the qemu driver).
There are now three cases:
server 0.9.10 and client 0.9.10 or newer: No impact - there were no
hypervisor drivers that supported cpu stats
server 0.9.11 or newer and client 0.9.10: if the client calls with
ncpus beyond the max, then the rpc call will fail on the client side
and disconnect the client, but the server is no worse for the wear
server 0.9.11 or newer and client 0.9.11: the server can return a
truncated array and the client will do just fine
I reproduced the problem by using a host with 2 CPUs, and doing:
virsh cpu-stats $dom --start 1 --count 2
* daemon/remote.c (remoteDispatchDomainGetCPUStats): Allow driver
to omit tail of array.
* src/remote/remote_driver.c (remoteDomainGetCPUStats):
Accommodate driver that omits tail of array.
* src/libvirt.c (virDomainGetCPUStats): Document this.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Clear all
unpopulated entries.
* For now, only "cpu_time" is supported.
* cpuacct cgroup is used for providing percpu cputime information.
* src/qemu/qemu.conf - take care of cpuacct cgroup.
* src/qemu/qemu_conf.c - take care of cpuacct cgroup.
* src/qemu/qemu_driver.c - added an interface
* src/util/cgroup.c/h - added interface for getting percpu cputime
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
These changes are applied only if the hostdev has a parent net device
(i.e. if it was defined as "<interface type='hostdev'>" rather than
just "<hostdev>"). If the parent netdevice has virtual port
information, the original virtualport associate functions are called
(these set and restore both mac and port profile on an
interface). Otherwise, only mac address is set on the device.
Note that This is only supported for SR-IOV Virtual Functions (not for
standard PCI or USB netdevs), and virtualport association is only
supported for 802.1Qbh. For all other types of cards and types of
virtualport, a "Config Unsupported" error is returned and the
operation fails.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
This patch includes the following changes to virnetdevmacvlan.c and
virnetdevvportprofile.c:
- removes some netlink functions which are now available in
virnetdev.c
- Adds a vf argument to all port profile functions.
For 802.1Qbh devices, the port profile calls can use a vf argument if
passed by the caller. If the vf argument is -1 it will try to derive the vf
if the device passed is a virtual function.
For 802.1Qbg devices, This patch introduces a null check for the device
argument because during port profile assignment on a hostdev, this argument
can be null.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
qemuDomainAttachNetDevice
- re-ordered some things at start of function because
networkAllocateActualDevice should always be run and a slot
in def->nets always allocated, but host_net_add isn't needed
if the actual type is hostdev.
- if actual type is hostdev, defer to
qemuDomainAttachHostDevice (which will reach up to the NetDef
for things like MAC address when necessary). After return
from qemuDomainAttachHostDevice, slip directly to cleanup,
since the rest of the function is specific to emulated net
devices.
- put assignment of new NetDef into expanded def->nets down
below cleanup: (but only on success) since it is also needed
for emulated and hostdev net devices.
qemuDomainDetachHostDevice
- after locating the exact device to detach, check if it's a
network device and, if so, use toplevel
qemuDomainDetachNetDevice instead so that the def->nets list
is properly updated, and 'actual device' properly returned to
network pool if appropriate. Otherwise, for normal hostdevs,
call the lower level qemuDomainDetachThisDevice.
qemuDomainDetachNetDevice
- This is where it gets a bit tricky. After locating the device
on the def->nets list, if the network device type == hostdev,
call the *lower level* qemuDomainDetachThisDevice (which will
reach back up to the parent net device for MAC address /
virtualport when appropriate, then clear the device out of
def->hostdevs) before skipping past all the emulated
net-device-specific code to cleanup:, where the network
device is removed from def->nets, and the network device
object is freed.
In short, any time a hostdev-type network device is detached, we must
go through the toplevel virDomaineDetachNetDevice function first and
last, to make sure 1) the def->nnets list is properly managed, and 2)
any device allocated with networkAllocateActualDevice is properly
freed. At the same time, in the middle we need to go through the
lower-level vidDomainDetach*This*HostDevice to be sure that 1) the
def->hostdevs list is properly managed, 2) the PCI device is properly
detached from the guest and reattached to the host (if appropriate),
and 3) any higher level teardown is called at the appropriate time, by
reaching back up to the NetDef config (part (3) will be covered in a
separate patch).
This patch makes sure that each network device ("interface") of
type='hostdev' appears on both the hostdevs list and the nets list of
the virDomainDef, and it modifies the qemu driver startup code so that
these devices will be presented to qemu on the commandline as hostdevs
rather than as network devices.
It does not add support for hotplug of these type of devices, or code
to honor the <mac address> or <virtualport> given in the config (both
of those will be done in separate patches).
Once each device is placed on both lists, much of what this patch does
is modify places in the code that traverse all the device lists so
that these hybrid devices are only acted on once - either along with
the other hostdevs, or along with the other network interfaces. (In
many cases, only one of the lists is traversed / a specific operation
is performed on only one type of device. In those instances, the code
can remain unchanged.)
There is one special case - when building the commandline, interfaces
are allowed to proceed all the way through
networkAllocateActualDevice() before deciding to skip the rest of
netdev-specific processing - this is so that (once we have support for
networks with pools of hostdev devices) we can get the actual device
allocated, then rely on the loop processing all hostdevs to generate
the correct commandline.
(NB: <interface type='hostdev'> is only supported for PCI network
devices that are SR-IOV Virtual Functions (VF). Standard PCI[e] and
USB devices, and even the Physical Functions (PF) of SR-IOV devices
can only be assigned to a guest using the more basic <hostdev> device
entry. This limitation is mostly due to the fact that non-SR-IOV
ethernet devices tend to lose mac address configuration whenever the
card is reset, which happens when a card is assigned to a guest;
SR-IOV VFs fortunately don't suffer the same problem.)
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0' bus='0' slot='4' function='3'/>
</source>
<mac address='00:11:22:33:44:55'/>
<address type='pci' domain='0' bus='0' slot='7' function='0'/>
</interface>
This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.
NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.
Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:
<interface type='hostdev'>
<source>
<address type='usb' bus='0' device='4'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
If the vendor/product form of usb specification is used, type='usb'
is implied:
<interface type='hostdev'>
<source>
<vendor id='0x0012'/>
<product id='0x24dd'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
This refactoring is necessary to support hotplug detach of
type=hostdev network devices, but needs to be in a separate patch to
make potential debugging of regressions more practical.
Rather than the lowest level functions searching for a matching
device, the search is now done in the toplevel function, and an
intermediate-level function (qemuDomainDetachThisHostDevice()), which
expects that the device's entry is already found, is called (this
intermediate function will be called by qemuDomainDetachNetDevice() in
order to support detach of type=hostdev net devices)
This patch should result in 0 differences in functionality.
In order to allow for a virDomainHostdevDef that uses the
virDomainDeviceInfo of a "higher level" device (such as a
virDomainNetDef), this patch changes the virDomainDeviceInfo in the
HostdevDef into a virDomainDeviceInfoPtr. Rather than adding checks
all over the code to check for a null info, we just guarantee that it
is always valid. The new function virDomainHostdevDefAlloc() allocates
a virDomainDeviceInfo and plugs it in, and virDomainHostdevDefFree()
makes sure it is freed.
There were 4 places allocating virDomainHostdevDefs, all of them
parsers of one sort or another, and those have all had their
VIR_ALLOC(hostdev) changed to virDomainHostdevDefAlloc(). Other than
that, and the new functions, all the rest of the changes are just
mechanical removals of "&" or changing "." to "->".
There will be cases where the iterator callback will need to know the
type of the device whose info is being operated on, and possibly even
need to use some of the device's config. This patch adds a
virDomainDeviceDefPtr to the args of every callback, and fills it in
appropriately as the devices are iterated through.
The virDomainDeviceInfoPtrs in qemuCollectPCIAddress and
qemuComparePCIDevice are named "dev" and "dev1", but those functions
will be changed (in order to match a change in the args sent to
virDomainDeviceInfoIterate() callback args) to contain a
virDomainDeviceDefPtr device.
This patch renames "dev" to "info" (and "dev[n]" to "info[n]") to
avoid later confusion.
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise. Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
No matter what cache mode is used, readonly disks are always safe wrt
migration. Shared disks are required to be readonly or to disable
host-side cache, which makes them safe as well.
With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.
When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).
In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.
In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.
This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.
There is no other behavioral change created by this patch.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
This actually wires up the new optional parameter to block_stream:
http://wiki.qemu.org/Features/LiveBlockMigration/ImageStreamingAPI
The error checking is still sparse, since libvirt must not use
qemu-img or header probing on a qcow2 file in use by qemu to
check if the backing file name is valid; so for now, libvirt is
relying on qemu to diagnose an incorrect backing name. Fixing this
will require libvirt to track the entire backing file chain at the
time qemu is started and keeps it updated with snapshot and pull
operations.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Add
parameter, and update callers.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Update
signature.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update caller.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Likewise.
Block job commands are not part of upstream qemu until 1.1; and
proper support of job completion and cancellation depends on being
able to receive QMP events, which implies the JSON monitor.
Additionally, some early versions of block job commands were
backported to RHEL qemu, but these versions lacked asynchronous
job cancellation and partial block pull, so there are several
patches that will still be needed in this area of libvirt code
to support both flavors of block job commands.
Due to earlier patches in libvirt, we are guaranteed that all versions
of qemu that support block job commands already require libvirt to
use the JSON monitor. That means that the text version of block jobs
will not be used, and having to refactor two copies of the block job
handlers makes no sense. So instead, we delete the text handlers.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Drop text monitor
support.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextBlockJob): Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextParseBlockJobOne)
(qemuMonitorTextParseBlockJob, qemuMonitorTextBlockJob):
Likewise.
Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
For any disk controller model which is not "lsilogic", the command
line will be like:
-drive file=/dev/sda,if=none,id=drive-scsi0-0-3-0,format=raw \
-device scsi-disk,bus=scsi0.0,channel=0,scsi-id=3,lun=0,i\
drive=drive-scsi0-0-3-0,id=scsi0-0-3-0
The relationship between the libvirt address attrs and the qdev
properties are (controller model is not "lsilogic"; strings
inside <> represent libvirt adress attrs):
bus=scsi<controller>.0
channel=<bus>
scsi-id=<target>
lun=<unit>
* src/qemu/qemu_command.h: (New param "virDomainDefPtr def"
for function qemuBuildDriveDevStr; new param "virDomainDefPtr
vmdef" for function qemuAssignDeviceDiskAlias. Both for
virDomainDiskFindControllerModel's use).
* src/qemu/qemu_command.c:
- New param "virDomainDefPtr def" for qemuAssignDeviceDiskAliasCustom.
For virDomainDiskFindControllerModel's use, if the disk bus is "scsi"
and the controller model is not "lsilogic", "target" is one part of
the alias name.
- According change on qemuAssignDeviceDiskAlias and qemuBuildDriveDevStr
* src/qemu/qemu_hotplug.c:
- Changes to be consistent with declarations of qemuAssignDeviceDiskAlias
qemuBuildDriveDevStr, and qemuBuildControllerDevStr.
* tests/qemuxml2argvdata/qemuxml2argv-pseries-vio-user-assigned.args,
tests/qemuxml2argvdata/qemuxml2argv-pseries-vio.args: Update the
generated command line.
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
In qemuDomainAttachNetDevice, the guest's tap interface has only been
attached to the bridge if iface_connected is true. It's possible for
an error to occur prior to that happening, and previously we would
attempt to remove the tap interface from the bridge even if it hadn't
been attached.
QMP commands don't need to be escaped since converting them to json
also escapes special characters. When a QMP command fails, however,
libvirt falls back to HMP commands. These fallback functions
(qemuMonitorText*) do their own escaping, and pass the result directly
to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these
pre-escaped commands will be escaped again when converted to json,
which can result in the wrong arguments being sent.
For example, a filename test\file would be sent in json as
test\\file.
This prevented attaching an image file with a " or \ in its name in
qemu 1.0.50, and also broke rbd attachment (which uses backslashes to
escape some internal arguments.)
Reported-by: Masuko Tomoya <tomoya.masuko@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch fixes console corruption, that happens if two concurrent
sessions are opened for a single console on a domain. Result of this
corruption was that each of the console streams recieved just a part
of the data written to the pipe so every console rendered unusable.
New helper function for safe console handling is used to establish the
console stream connection. This function ensures that no other libvirt
client is using the console (with the ability to disconnect consoles of
libvirt clients) and that no UUCP style lockfile is placed on the PTY
device.
* src/qemu/qemu_domain.h
- add data structure to domain's private data dealing with
console connections
* src/qemu/qemu_domain.c:
- allocate/free domain's console data structure
* src/qemu/qemu_driver.c
- use the new helper function for console handling
using 'system-wakeup' monitor command. It is supported only in JSON,
as we are enabling it if possible. Moreover, this command is available
in qemu-1.1+ which definitely has JSON.
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
It's possible to disable SPICE TLS in qemu.conf. When this happens,
libvirt ignores any SPICE TLS port or x509 directory that may have
been set when it builds the qemu command line to use. However, it's
not ignoring the secure channels that may have been set and adds
tls-channel arguments to qemu command line.
Current qemu versions don't report an error when this happens, and try to use
TLS for the specified channels.
Before this patch
<domain type='kvm'>
<name>auto-tls-port</name>
<memory>65536</memory>
<os>
<type arch='x86_64' machine='pc'>hvm</type>
</os>
<devices>
<graphics type='spice' port='5900' tlsPort='-1' autoport='yes' listen='0' ke
<listen type='address' address='0'/>
<channel name='main' mode='secure'/>
<channel name='inputs' mode='secure'/>
</graphics>
</devices>
</domain>
generates
-spice port=5900,addr=0,disable-ticketing,tls-channel=main,tls-channel=inputs
and starts QEMU.
After this patch, an error is reported if a TLS port is set in the XML
or if secure channels are specified but TLS is disabled in qemu.conf.
This is the behaviour the oVirt people (where I spotted this issue) said
they would expect.
This fixes bug #790436
https://bugzilla.redhat.com/show_bug.cgi?id=795656 mentions
that a graceful destroy request can time out, meaning that the
error message is user-visible and should be more appropriate
than just internal error.
* src/qemu/qemu_driver.c (qemuDomainDestroyFlags): Swap error type.
Migrating domains with disks using cache != none is unsafe unless the
disk images are stored on coherent clustered filesystem. Thus we forbid
migrating such domains unless VIR_MIGRATE_UNSAFE flags is used.
* src/qemu/qemu_process.c (qemuFindAgentConfig): avoid crash libvirtd due to
deref a NULL pointer.
* How to reproduce?
1. virsh edit the following xml into guest configuration:
<channel type='pty'>
<target type='virtio'/>
</channel>
2. virsh start <domain>
or
% virt-install -n foo -r 1024 --disk path=/var/lib/libvirt/images/foo.img,size=1 \
--channel pty,target_type=virtio -l <installation tree>
Signed-off-by: Alex Jia <ajia@redhat.com>
When migrating a qemu domain, we enter the monitor, send some commands,
try to connect to destination qemu, send other commands, end exit the
monitor. However, if we couldn't connect to destination qemu we forgot
to exit the monitor.
Bug introduced by commit d9d518b1c8.
In case libvirtd cannot detect host CPU model (which may happen if it
runs inside a virtual machine), the daemon is likely to segfault when
starting a new qemu domain. It segfaults when domain XML asks for host
(either model or passthrough) CPU or does not ask for any specific CPU
model at all.
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
The current default method of terminating the qemu process is to send
a SIGTERM, wait for up to 1.6 seconds for it to cleanly shutdown, then
send a SIGKILL and wait for up to 1.4 seconds more for the process to
terminate. This is problematic because occasionally 1.6 seconds is not
long enough for the qemu process to flush its disk buffers, so the
guest's disk ends up in an inconsistent state.
Since this only occasionally happens when the timeout prior to SIGKILL
is 1.6 seconds, this patch increases that timeout to 10 seconds. At
the very least, this should reduce the occurrence from "occasionally"
to "extremely rarely". (Once SIGKILL is sent, it waits another 5
seconds for the process to die before returning).
Note that in the cases where it takes less than this for qemu to
shutdown cleanly, libvirt will *not* wait for any longer than it would
without this patch - qemuProcessKill polls the process and returns as
soon as it is gone.
This patch is based on an earlier patch by Eric Blake which was never
committed:
https://www.redhat.com/archives/libvir-list/2011-November/msg00243.html
Aside from rebasing, this patch only drops the driver lock once (prior
to the first time the function sleeps), then leaves it dropped until
it returns (Eric's patch would drop and re-acquire the lock around
each call to sleep).
At the time Eric sent his patch, the response (from Dan Berrange) was
that, while it wasn't a good thing to be holding the driver lock while
sleeping, we really need to rethink locking wrt the driver object,
switching to a finer-grained approach that locks individual items
within the driver object separately to allow for greater concurrency.
This is a good plan, and at the time it made sense to not apply the
patch because there was no known bug related to the driver lock being
held in this function.
However, we now know that the length of the wait in qemuProcessKill is
sometimes too short to allow the qemu process to fully flush its disk
cache before SIGKILL is sent, so we need to lengthen the timeout (in
order to improve the situation with management applications until they
can be updated to use the new VIR_DOMAIN_DESTROY_GRACEFUL flag added
in commit 72f8a7f197). But, if we
lengthen the timeout, we also lengthen the amount of time that all
other threads in libvirtd are essentially blocked from doing anything
(since just about everything needs to acquire the driver lock, if only
for long enough to get a pointer to a domain).
The solution is to modify qemuProcessKill to drop the driver lock
while sleeping, as proposed in Eric's patch. Then we can increase the
timeout with a clear conscience, and thus at least lower the chances
that someone running with existing management software will suffer the
consequence's of qemu's disk cache not being flushed.
In the meantime, we still should work on Dan's proposal to make
locking within the driver object more fine grained.
(NB: although I couldn't find any instance where qemuProcessKill() was
called with no jobs active for the domain (or some other guarantee
that the current thread had at least one refcount on the domain
object), this patch still follows Eric's method of temporarily adding
a ref prior to unlocking the domain object, because I couldn't
convince myself 100% that this was the case.)
In the future (my next patch in fact) we may want to make
decisions depending on qemu having a monitor command or not.
Therefore, we want to set qemuCaps flag instead of querying
on the monitor each time we are about to make that decision.
When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others. But bytes and iops should
be relatively independent. Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings. Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.
The auto-generated WWN comply with the new addressing schema of WWN:
<quote>
the first nibble is either hex 5 or 6 followed by a 3-byte vendor
identifier and 36 bits for a vendor-specified serial number.
</quote>
We choose hex 5 for the first nibble. And for the 3-bytes vendor ID,
we uses the OUI according to underlying hypervisor type, (invoking
virConnectGetType to get the virt type). e.g. If virConnectGetType
returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns
ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only
supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last
36 bits are auto-generated.
Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.
Fix tests to pass with this change.
virsh blkiotune dom --device-weights /dev/sda,400 --config
wasn't working correctly.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Use
correct definition.
Reported by Alex Jia:
==21503== 112 (32 direct, 80 indirect) bytes in 1 blocks are
definitely lost in loss record 37 of 40
==21503== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==21503== by 0x4A8991: virAlloc (memory.c:101)
==21503== by 0x505A6C: x86DataCopy (cpu_x86.c:247)
==21503== by 0x507B34: x86Compute (cpu_x86.c:1225)
==21503== by 0x43103C: qemuBuildCommandLine (qemu_command.c:3561)
==21503== by 0x41C9F7: testCompareXMLToArgvHelper
(qemuxml2argvtest.c:183)
==21503== by 0x41E10D: virtTestRun (testutils.c:141)
==21503== by 0x41B942: mymain (qemuxml2argvtest.c:705)
==21503== by 0x41D7E7: virtTestMain (testutils.c:696)
Qemu uses non-blocking I/O which doesn't play nice with regular file
descriptors. We need to pass a pipe to qemu instead, which can easily be
done using iohelper.
