qemuBuildDriveSourceStr omits the disk format string when we are
emulating a 'fat' filesystem from a directory. The logic should decide
based on the 'actualType' as a disk type=pool may be converted to a
directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageSourceGetActualType would return VIR_STORAGE_TYPE_NONE in case
when a virStorageSource of (top level) type VIR_STORAGE_TYPE_VOLUME was
not prepared to use by the vm by calling
virDomainDiskTranslateSourcePool.
Fix this issue by returning VIR_STORAGE_TYPE_VOLUME in case when the
volume was not translated yet.
Additionally also add documentation for the function describing the
quirk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for this has only relatively recently been added to
virt-manager.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the latest virt-manager to regenerate the files.
The command line is once again along the lines of
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics (none|vnc) \
--print-xml
with some minor tweaks performed afterwards.
This removes a number of inconsistencies between the files,
and makes it so the only differences are actually relevant
either to the architecture and machine type at hand, or to
having graphics rather than being headless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now *-headless and *-graphics tests are using different
quoting styles, which results in the diff between them being
basically useless, whereas we would like it to be possible to
compare these files directly and easily spot the differences.
Convert all *-graphics tests to single quotes, which is the
style libvirt itself uses when formatting XML: this is a fact
that will come in handy later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field is set just before returning on success.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When changing media using blockdev-add we need to remove the leftovers
if we didn't succeed plugging in the full chain or closing the tray.
Otherwise the data structures will be freed and thus the backing chain
members will never be unplugged.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As this conversion removes the last use of qemuHotplugDiskSource*
functions we can remove all of them now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helpers for removing the backing chain in case when
-blockdev is used. For -drive this function has a local implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the use of qemuHotplugDiskSourceAttach* helpers with
qemuBuildStorageSourceChainAttachPrepare(Blockdev|Drive).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the open-coded local implementation with
qemuBuildStorageSourceChainAttachPrepare(Drive|Blockdev).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These are meant to replace the ad-hoc helpers qemuHotplugDiskSourceAttach...
and the open-coded version in qemu_command.c for use in command line
generation.
The functions for preparing for attach of chains unfortunately need to
be in qemu_command.c as they use function defined by that file and
inclusion hierarchy.
In this patch new functions are introduced and subsequent patches then
refactor individual parts to use them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use only one copy-on-read filter per disk, so we should handle it
separately from the chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it to qemu_block.c and call it qemuBlockStorageSourceDetachPrepare.
It will be reused in other parts as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've deprecated qemuConnectDomainXMLFromNative qemuDomainQemuAttach.
Switch the error code from VIR_ERR_OPERATION_UNSUPPORTED to the new
VIR_ERR_DEPRECATED.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow a simple programatic check that a given feature is no longer
supported by introducing a separate error code for this scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.
A netfs pool with:
<source>
<host name='10.20.30.40'/>
<dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.
Sanitize the source dir as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1723247
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add omitted comma for multiple hosts.
Fixes: cdd362e0e7
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 9c9620af called x86DataAdd without checking for an error,
so add the error checking.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 56b254dcc called virCPUx86DataAdd, but returned -1 directly
without calling the virCPUx86DataFree.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trivial change. Adding the name of the device that has an
unknown PCI header type in that function helps when debugging
PCI code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 7bf679ae removed the @json argument from the qemuMonitorOpen
prototype; however, it did not update the ATTRIBUTE_NONNULL value
which causes a build failure for when checking is enabled such as
when lv_cv_static_analysis is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In the virStorageSourceChainHasManagedPR() function we iterate
over whole backing chain trying to determine if one of the layers
has managed PR configured. But due to a typo we in fact check the
top layer only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The files for libvirt-net-rpc-server.la refernce the sasl/sasl.h
system header but never used the $(SASL_CFLAGS) variable. This
was never noticed previously because the $(AVAHI_CLFAGS) were
set and these typically pulled in the same include directory.
When mDNS/Avahi support was removed this exposed the bug which
caused FreeBSD builds to break as /usr/local/include was no
longer searched for headers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Filter out the given capabilities and set domain taint if we've done so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when e.g. a new feature breaks upstream behaviour it's useful
to allow users to disable the new feature to verify the regression and
possibly use it as a workaround until a fix is available.
The new qemu.conf option named "capability_filters" allows to remove
qemu capabilities from the detected bitmap.
This patch introduces the configuration infrastructure to parse the
option and pass it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Show that the capability tweaking stuff works by enabling blockdev in
the 'qemu-ns' test even in versions where it's not yet fully supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the DO_TEST_CAPS_LATEST/VER infrastructure to run a more modern
version of this and also fork it to a pre-blockdev version so that we
can check the qemu namespace capability tweaking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing purposes it's sometimes desired to be able to control the
presence of capabilities of qemu. This adds the possibility to do this
via the qemu namespace.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly how we allow adding arbitrary command line arguments and
environment variables this patch introduces the ability to control
libvirt's perception of the qemu process by tweaking the capability bits
for testing purposes.
The idea is to allow developers and users either test a new feature by
enabling it early or disabling it to see whether it introduced
regressions.
This feature is not meant for production use though, so users should
handle it with care.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.
Add a taint flag where we will flag such a domain so it's obvious what's
happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough environment variables.
Note that the validation function checks that the first letter must be a
character or underscore which makes the check whether the name is
redundant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough commandline arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_conf.c deals with the configuration file. Better fit for the
structure and freeing function will be qemu_domain.c where the rest of
the namespace parsing/formatting stuff resides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data injected via the namespace may contain also other things than
commandline passthrough definitions. Rename it to make it more
universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In kernel 4.12 there was introduced new BFQ scheduler and in kernel
5.0 the old CFQ scheduler was removed. This has an implication on
the cgroups file names.
If the CFQ controller is enabled we use one file:
io.weight
The new BFQ controller expose one file with different name:
io.bfq.weight
Except for different name they have different syntax.
io.weight:
default $val
major:minor $val
io.bfq.weight:
$val
The difference is that BFQ doesn't support per-device weight.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In kernel 4.12 there was introduced new BFQ scheduler and in kernel
5.0 the old CFQ scheduler was removed. This has an implication on
the cgroups file names.
If the CFQ controller is enabled we use these two files:
blkio.weight
blkio.weight_device
The new BFQ controller expose only one file with different name:
blkio.bfq.weight
The reason is that BFQ controller doesn't support per-device weight.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get value
for specific device. This way we will not build the path again in
virCgroupGetValueForBlkDev.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
