Without the fix in the previous patch the JSON data from QEMU would be
interpreted as Haswell-noTSX because x86DataFilterTSX would filter rtm
and hle features as a result of
family == 6 && model == 63 && stepping < 4
test even though this CPU has stepping == 4.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though only family and model are used for matching CPUID data with
CPU models from cpu_map.xml, stepping is used by x86DataFilterTSX which
is supposed to disable TSX on CPU models with broken TSX support. Thus
we need to start parsing stepping from QEMU to make sure we don't
disable TSX on CPUs which provide working TSX implementation. See the
following patch for a real world example of such CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.
When libvirt older than 3.9.0 reconnected to a running domain started by
old libvirt it could have messed up the expansion of host-model by
adding features QEMU does not support (such as cmt). Thus whenever we
reconnect to a running domain, revert to an active snapshot, or restore
a saved domain we need to check the guest CPU model and remove the
CPU features unknown to QEMU. We can do this because we know the domain
was successfully started, which means the CPU did not contain the
features when libvirt started the domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1495171
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to a domain started with a host-model CPU which was
started by old libvirt that did not replace host-model with the real CPU
definition, libvirt replaces the host-model CPU with the CPU from
capabilities (because this is what the old libvirt did when it started
the domain). Without this patch libvirt could use features unknown to
QEMU in the CPU definition which replaced the original host-model CPU.
Such domain would keep running just fine, but any attempt to migrate it
will fail and once the domain is saved or snapshotted, restoring it
would fail too.
In other words whenever we want to use the CPU definition from host
capabilities as a guest CPU definition, we have to filter the unknown
features.
https://bugzilla.redhat.com/show_bug.cgi?id=1495171
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit e371b3b changed all the links to libvirt.org to use https.
Remove the leftover 'http' links from downloads page, since they
point to https anyway.
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
Storage driver uses virStorageSource only partially to store it's
configuration but fully when parsing backing files of storage volumes.
This patch sets the 'type' field to a value other than
VIR_STORAGE_TYPE_NONE so that further patches can add a terminator
element to backing chains without breaking iteration.
The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.
Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.
Index will remain an internal property even if we allow backing store
parsing from the XML, so we need to allow backing store without it in
the schema.
Existing qemuParseCommandLineMem() will parse "-m 4G" format string.
This patch allows it to parse "-m size=8126464k,slots=32,maxmem=33554432k"
format along with existing format. And adds a testcase to validate the changes.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Hyper-V uses its own specific memory management so no mapping is going to
be perfect. However, it is more correct to map Limit to max_memory (it
really is the upper limit of what the VM may potentially use) and keep
cur_balloon equal to total_memory.
The typical value returned from Hyper-V in Limit is 1 TiB, which is not
really going to work if interpreted as "startup memory" to be ballooned
away later.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
The code was vulnerable to SQL injection. Likely not a security issue due to
WMI SQL and other constraints but still lame. For example:
virsh # dominfo \"
error: failed to get domain '"'
error: internal error: SOAP fault during enumeration: code 's:Sender', subcode
'n:CannotProcessFilter', reason 'The data source could not process the filter.
The filter might be missing or it might be invalid. Change the filter and try
the request again. ', detail 'The WS-Management service cannot process the
request. The WQL query is invalid. '
This commit fixes the Hyper-V driver by escaping all WMI SQL string parameters.
The same command with the fix:
virsh # dominfo \"
error: failed to get domain '"'
error: Domain not found: No domain with name "
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
"%s is not a Hyper-V server" is not a correct generalization of all possible
error conditions of hypervEnumAndPull. For example:
$ virsh --connect hyperv://localhost/?transport=http
Enter username for localhost [administrator]:
Enter administrator's password for localhost: <enters incorrect password>
error: failed to connect to the hypervisor
error: internal error: localhost is not a Hyper-V server
This commit removes the general virReportError from hypervInitConnection and
also the "Invalid query" virReportError from hypervSerializeEprParam, which
does not correctly describe the error either (virBufferCheckError has
already set a meaningful error message at that point).
The same scenario with the fix:
$ virsh --connect hyperv://localhost/?transport=http
Enter username for localhost [administrator]:
Enter administrator's password for localhost: <enters incorrect password>
error: failed to connect to the hypervisor
error: internal error: Transport error during enumeration: User, password or
similar was not accepted (26)
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
The default_tls_x509_verify (and related) parameters in qemu.conf
control whether the QEMU TLS servers request & verify certificates
from clients. This works as a simple access control system for
servers by requiring the CA to issue certs to permitted clients.
This use of client certificates is disabled by default, since it
requires extra work to issue client certificates.
Unfortunately the code was using this configuration parameter when
setting up both TLS clients and servers in QEMU. The result was that
TLS clients for character devices and disk devices had verification
turned off, meaning they would ignore errors while validating the
server certificate.
This allows for trivial MITM attacks between client and server,
as any certificate returned by the attacker will be accepted by
the client.
This is assigned CVE-2017-1000256 / LSN-2017-0002
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
https://bugzilla.redhat.com/show_bug.cgi?id=1460143
xsaveopt is artificially removed from the host to test disabled feature
which is only included in QEMU's version of the CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
arat is now enabled even if the hardware does not support it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This CPU was incorrectly detected as SandyBridge before because the
number of additional <feature> elements was the same for both
SandyBridge and Westmere CPU models, but SandyBridge is newer (the CPU
signature does not help here because it doesn't match any signature
defined in cpu_map.xml). But since QEMU's version of SandyBridge CPU
model contains xsaveopt which needs to be disabled, Westmere becomes the
best CPU model when translating CPUID data to virCPUDef. Unfortunately,
this doesn't help with translating the data we got from QEMU and the CPU
model is still computed as SandyBridge in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The unavailable features do not make any difference in this case,
because this is a SandyBridge CPU which has an empty list of unavailable
features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When testing cpuDecode for computing guest CPU definition from CPUID
data (the CPU definition reported by domain capabilities), we need to
use CPU models (and their usability blockers) from QEMU if they are
available to cpuDecode in the same way it is actually used in the qemu
driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Gather query-cpu-definitions results and use them for testing CPU model
usability blockers in CPUID to virCPUDef translation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the actual result does not match our expectation, the tests would
not correctly show the difference if a CPU feature is disabled in the
expected result and the actual result does not mention it at all. The
test could complain about an unrelated CPU feature or it could even
crash in case the actual result contains no more features to go through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Various version of json_reformat use different number of spaces for
indenting. Let's use a simple python reformatter to gain full control
over the formatting for consistent results.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When decoding CPUID data to virCPUDef we need to be careful about using
a CPU model which cannot be directly used on the current host. Normally,
libvirt would notice the features which prevent the model from being
usable and it would disable them in the computed virCPUDef, but this
won't work in case the definition of the CPU model in QEMU contains more
features than what we have in cpu_map.xml. We need to count with the
usability blockers we got from QEMU and explicitly disable all of them
to make the computed virCPUDef usable.
https://bugzilla.redhat.com/show_bug.cgi?id=1464832
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This internal API can be used to find a specific CPU model in
virDomainCapsCPUModels list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The "preferred" parameter is not used by any caller of cpuDecode
anymore. It's only used internally in cpu_x86 to implement cpuBaseline.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All APIs which expect a list of CPU models supported by hypervisors were
switched from char **models and int models to just accept a pointer to
virDomainCapsCPUModels object stored in domain capabilities. This avoids
the need to transform virDomainCapsCPUModelsPtr into a NULL-terminated
list of model names and also allows the various cpu driver APIs to
access additional details (such as its usability) about each CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
query-cpu-definitions QMP command returns a list of unavailable features
which prevent CPU models from being usable on the current host. So far
we only checked whether the list was empty to mark CPU models as
(un)usable. This patch parses all unavailable features for each CPU
model and stores them in virDomainCapsCPUModel as a list of usability
blockers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When a hypervisor marks a CPU model as unusable on the current host, it
may also give us a list of features which prevent the model from being
usable. Storing this list in virDomainCapsCPUModel will help the CPU
driver with creating a host-model CPU configuration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
