The libvirt_util.la library was mistakenly linked into libvirtd
directly. Since libvirt_util.la is already linked to libvirt.so,
this resulted in libvirtd getting two copies of the code and
more critically 2 copies of static global variables.
Testing in turn exposed a issue with loadable modules. The
gnulib replacement functions are not exported to loadable
modules. Rather than trying to figure out the name sof all
gnulib functions & export them, just linkage all loadable
modules against libgnu.la statically.
* daemon/Makefile.am: Remove linkage of libvirt_util.la
and libvirt_driver.la
* src/Makefile.am: Link driver modules against libgnu.la
* src/libvirt.c: Don't try to load modules which were
compiled out
* src/libvirt_private.syms: Export all other internal
symbols that are required by drivers
A more natural auditing point would perhaps be
SELinuxSetSecurityProcessLabel, but this happens in the child after root
permissions are dropped, so the kernel would refuse the audit record.
Most operations are audited at the libvirtd level; auditing in
src/libvirt.c would result in two audit entries per operation (one in
the client, one in libvirtd).
The only exception is a domain stopping of its own will (e.g. because
the user clicks on "shutdown" inside the interface). There can often be
no client connected at the time the domain stops, so libvirtd does not
have any virConnectPtr object on which to attach an event watch. This
patch therefore adds auditing directly inside the qemu driver (other
drivers are not supported).
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
The statstest is xen specific. Instead of filling the code with
a huge number of #ifdef WITH_XEN, just make its entire compilation
conditional in the Makefile.am. Also ensure it links to the Xen
driver so that it builds when driver modules are enabled
* tests/Makefile.am: Make statstest xen conditional. Link to
xen driver
* tests/Makefile.am: Remove all conditionals
This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.
See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html
This relies on the fact that def->maxvcpus can be at most 32 with xen.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
* tools/virsh.c (cmdSetvcpus): Add new flags. Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.
Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point. Only in subsequent per-driver patches will
a distinction be made.
In general, virDomainGetInfo should prefer the current vcpus.
* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit. Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.
Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API. On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.
* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.
Factors common checks (such as nonzero vcpu count) up front, but
drivers will still need to do additional flag checks.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpusFlags):
New functions.
(virDomainSetVcpus, virDomainGetMaxVcpus): Refer to new API.
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.
* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html
<domain ...>
<vcpu current='x'>y</vcpu>
...
can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus. If current is omitted, then
current and max are assumed to be the same value.
* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.
In the table built for traffic coming from the VM going to the host make the following changes:
- don't ACCEPT the packets but do a 'RETURN' and let the host-specific firewall rules in subsequent rules evaluate whether the traffic is allowed to enter
- use the '-m state' in the rules as everywhere else
ESX(i) uses UTF-8, but a Windows based GSX server writes
Windows-1252 encoded VMX files.
Add a test case to ensure that libxml2 provides Windows-1252
to UTF-8 conversion.
Since bugs due to double-closed file descriptors are difficult to track down in a multi-threaded system, I am introducing the VIR_CLOSE(fd) macro to help avoid mistakes here.
There are lots of places where close() is being used. In this patch I am only cleaning up usage of close() in src/conf where the problems were.
I also dare to declare close() as being deprecated in libvirt code base (HACKING).
Over root-squashing nfs, when virFileOperation() is called as uid==0,
it may fail with EACCES, but also with EPERM, due to
virFileOperationNoFork()'s failed attemp to chown a writable file.
qemudDomainSaveFlag() should expect this case, too.
qemudOpenAsUID is intended to open a file with the credentials of a
specified uid. Current implementation fails if the file is accessible to
one of uid's groups but not owned by uid.
This patch replaces the supplementary group list that the child process
inherited from libvirtd with the default group list of uid.
* docs/formatdomain.html.in: Add memtune element details, added min_guarantee
* src/libvirt.c: Update virDomainGetMemoryParameters api description, make
it more clear that the user first needs to call the api to get the number
of parameters supported and then call again to get the values.
* tools/virsh.pod: Add usage of new command memtune in virsh manpage
Vdsm needs to communicate with its guest agent via unix domain socket,
which qemu creates due to the following domain xml device:
<channel type='unix'>
<target type='virtio' name='com.redhat.rhevm.vdsm'/>
<source mode='bind' path='/var/lib/libvirt/qemu/channels/fcp-xp-1.com.redhat.rhevm.vdsm'/>
</channel>
The location of the socket below /var/lib/libvirt/qemu/channels makes
sense, to humans and selinux policy alike. However, that socket should
be accessible to vdsm, too.
Due to other (storage) reasons, vdsm is to join the "qemu" group. With
this patch, vdsm can look below /var/lib/libvirt/qemu and connect to the
socket.
The socket itself should be chmod'ed to allow qemu group read/write, but
that's for another project.
BZ#643407
* tools/virsh.c (vshCmdOptType): Add VSH_OT_ARGV. Delete
unused VSH_OT_NONE.
(vshCmddefGetData): Special case new opt flag.
(vshCmddefHelp): Display help for argv.
(vshCommandOptArgv): New function.
https://bugzilla.redhat.com/show_bug.cgi?id=623903 documents a qemu
bug that causes libvirt to hang if virt-manager happens to be
querying balloon info when a guest is paused. Until the qemu bug
is fixed, people need to know how to avoid the issue.
* docs/formatdomain.html.in (Memory balloon device): Mention
model='none'.
This introduces new attribute to filesystem element
to support customizable access mode for mount type.
Valid accessmode are: passthrough, mapped and squash.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
passthrough is the default model if not specified, that's
also the current behaviour.
The following filter transition from a filter allowing incoming TCP connections
<rule action='accept' direction='in' priority='401'>
<tcp/>
</rule>
<rule action='accept' direction='out' priority='500'>
<tcp/>
</rule>
to one that does not allow them
<rule action='drop' direction='in' priority='401'>
<tcp/>
</rule>
<rule action='accept' direction='out' priority='500'>
<tcp/>
</rule>
did previously not cut off existing (ssh) connections but only prevented newly initiated ones. The attached patch allows to cut off existing connections as well, thus enforcing what the filter is showing.
I had only tested with a configuration where the physical interface is connected to the bridge where the filters are applied. This patch now also solves a filtering problem where the physical interface is not connected to the bridge, but the bridge is given an IP address and the host routes between bridge and physical interface. Here the filters drop non-allowed traffic on the outgoing side on the host.
