Separate the logic of creating devices from their gathering.
Use this new function in qemuDomainNamespaceSetupHostdev and
qemuDomainNamespaceSetupDisk.
This patch pass event error up to the place where we can
use it. Error is passed only for sync blockjob event mode
as we can't use the error in async mode. In async mode we
just pass the event details to the client thru event API
but current blockjob event API can not carry extra parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Raw local files do not pass through the backing store detector and thus
the code did not allocate the required backing store terminator for
them. Previously the terminating element would be formatted into the XML
since the default values used for the metadata allowed that. This is a
regression since a693fdba01 which was not detected in the review.
This patch also reverts all the changes in the test files.
Until now we would skip loading of the backing chain for files which
don't support backing chains only when starting up the VM. Move the
check from qemuProcessPrepareHostStorage with some adaptations so that's
always applied.
Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests. New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.
This reverts commit b1c88c1476, whose
reasons are not totally clear.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Target model and target type must agree for the configuration
to make sense, so check that's actually the case and error out
otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of validating each target type / address type combination
separately, create a small helper to perform the matching and
collapse all existing checks into a single one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of waiting until we get to command line generation, we can
validate the target for a char device much earlier.
Move all the checks out of qemuBuildSerialChrDeviceStr() and into
the new fuction. This will later allow us to validate the target
for platform devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the first step in getting rid of the assumption that
isa-serial is the default target type for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Having a separate function for char device handling is better than
adding even more code to qemuDomainDeviceDefPostParse().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Rather than picking apart the two pieces we need/want (path, hosts,
and auth)- let's allocate/use a virStorageSourcePtr for iSCSI storage.
The end result is that qemuBuildSCSIiSCSIHostdevDrvStr doesn't need
to "fake" one for the qemuBuildNetworkDriveStr call.
Move the setup of the disk attribute to the disk source prepare function
which will allow proper usage with JSON props and move the fallback
(legacy) generating code into the block which is executed with legacy
options.
As a side-effect of this change we can clean up propagation of 'cfg'
into the command generator.
Also it's nice to see that the test output is the same even when the
value is generated in a different place.
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
When doing block commit we need to allow write for members of the
backing chain so that we can commit the data into them.
qemuDomainDiskChainElementPrepare was used for this which since commit
786d8d91b4 calls qemuDomainNamespaceSetupDisk which has very adverse
side-effects, namely it relabels the nodes to the same label it has in
the main namespace. This was messing up permissions for the commit
operation since its touching various parts of a single backing chain.
Since we are are actually not introducing new images at that point add a
flag for qemuDomainDiskChainElementPrepare which will refrain from
calling to the namespace setup function.
Calls from qemuDomainSnapshotCreateSingleDiskActive and
qemuDomainBlockCopyCommon do introduce new members all calls from
qemuDomainBlockCommit do not, so the calls are anotated accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1506072
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Setup everything related to disks in one place rather than calling in
from various places.
The change to ordering of the setup steps is necessary since secrets
need the master key to be present.
In 4f15707202 I've tried to make duplicates detection for
nested /dev mount better. However, I've missed the obvious case
when there are two same mount points. For instance if:
# mount --bind /dev/blah /dev/blah
# mount --bind /dev/blah /dev/blah
Yeah, very unlikely (in qemu driver world) but possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function works over domain definition and not domain object.
Its name is thus misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When a user provides the backing chain, we will not need to re-detect
all the backing stores again, but should move to the end of the user
specified chain. Additionally if a user provides a full terminated chain
we should not attempt any further detection.
Separate it so that it deals only with single virStorageSource, so that
it can later be reused for full backing chain support.
Two aliases are passed since authentication is more relevant to the
'storage backend' whereas encryption is more relevant to the protocol
layer. When using node names, the aliases will be different.
qemuDomainGetImageIds and qemuDomainStorageFileInit are helpful when
trying to access a virStorageSource from the qemu driver since they
figure out the correct uid and gid for the image.
When accessing members of a backing chain the permissions for the top
level would be used. To allow using specific permissions per backing
chain level but still allow inheritance from the parent of the chain we
need to add a new parameter to the image ID APIs.
This new capability enables a pause before device state serialization so
that we can finish all block jobs without racing with the end of the
migration. The pause is indicated by "pre-switchover" state. Once we're
done QEMU enters "device" migration state.
This patch just defines the new capability and QEMU migration states and
their mapping to our job states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we will be allowing users to set device aliases and memory
devices are fragile when it comes to aliases we have to make sure
they won't change during migration. Other devices should be fine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
