All calls to qemuMonitorGetMigrationCapability in QEMU driver are
replaced with qemuMigrationCapsGet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Each time we need to check whether a given migration capability is
supported by QEMU, we call query-migrate-capabilities QMP command and
lookup the capability in the returned list. Asking for the list of
supported capabilities once when we connect to QEMU and storing the
result in a bitmap is much better and we don't need to enter a monitor
just to check whether a migration capability is supported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the encryption information can also be disk source specific
move it from qemuDomainDiskPrivate to qemuDomainStorageSourcePrivate
Since the last allocated element from qemuDomainDiskPrivate is
removed, that means we no longer need qemuDomainDiskPrivateDispose.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the secret information is really virStorageSource specific
piece of data, let's manage the privateData from there instead of
at the Disk level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add the object definition and helpers to store security-related private
data for virStorageSources.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When commit id 'da86c6c22' added support for diskPriv->encinfo in
qemuDomainSecretDiskPrepare a change to qemuDomainSecretDiskDestroy
to was missed. Although qemuDomainDiskPrivateDispose probably would
do the trick.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1495511
When creating new /dev for domain ran in namespace we try to
preserve all sub-mounts of /dev. Well, not quite all. For
instance if /dev/foo/bar and /dev/foo are both mount points, only
/dev/foo needs preserving. /dev/foo/bar is preserved with it too.
Now, to identify such cases like this one STRPREFIX() is used.
That is not good enough. While it works for [/dev/foo/bar;
/dev/foo] case, it fails for [/dev/prefix; /dev/prefix2] where
the strings share the same prefix but are in fact two different
paths. The solution is to use STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We need to send allowReboot in the migration cookie to ensure the same
behavior of the virDomainSetLifecycleAction() API on the destination.
Consider this scenario:
1. On the source the domain is started with:
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
2. User calls an API to set "destroy" for <on_reboot>:
<on_poweroff>destroy</on_poweroff>
<on_reboot>destroy</on_reboot>
<on_crash>destroy</on_crash>
3. The guest is migrated to a different host
4a. Without the allowReboot in the migration cookie the QEMU
process on destination would be started with -no-reboot
which would prevent using the virDomainSetLifecycleAction() API
for the rest of the guest lifetime.
4b. With the allowReboot in the migration cookie the QEMU process
on destination is started without -no-reboot like it was started
on the source host and the virDomainSetLifecycleAction() API
continues to work.
The following patch adds a QEMU implementation of the
virDomainSetLifecycleAction() API and that implementation disallows
using the API if all actions are set to "destroy" because we add
"-no-reboot" on the QEMU command line. Changing the lifecycle action
is in this case pointless because the QEMU process is always terminated.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later on in implementation of new API
virDomainSetLifecycleAction(). In order to use it, we need to store
the value in status XML to not lose the information if libvirtd is
restarted.
If some guest was started by old libvirt where it was not possible
to change the lifecycle action for running guest, we can safely
detect it based on the current actions from the status XML.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When libvirt older than 3.9.0 reconnected to a running domain started by
old libvirt it could have messed up the expansion of host-model by
adding features QEMU does not support (such as cmt). Thus whenever we
reconnect to a running domain, revert to an active snapshot, or restore
a saved domain we need to check the guest CPU model and remove the
CPU features unknown to QEMU. We can do this because we know the domain
was successfully started, which means the CPU did not contain the
features when libvirt started the domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1495171
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently we don't do it. Therefore we accept senseless
combinations of models and buses they are attached to.
Moreover, diag288 watchdog is exclusive to s390(x).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Checking of disk presence accesses storage on the host so it should be
done from the host setup function. Move the code to new function called
qemuProcessPrepareHostStorage and remove qemuDomainCheckDiskPresence.
Introduce a new function to prepare domain disks which will also do the
volume source to actual disk source translation.
The 'pretend' condition is not transferred to the new location since it
does not help in writing tests and also no tests abuse it.
Introduce a function to setup any TLS needs for a disk source.
If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.
For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.
Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: John Ferlan <jferlan@redhat.com>
VM private data is cleared when the VM is turned off and also when the
VM object is being freed. Some of the clearing code was duplicated.
Extract it to a separate function.
This also removes the now unnecessary function
qemuDomainClearPrivatePaths.
Because qemuDomainDefCopy needs a string representation of a domain
definition, there's no reason for calling the lower level
qemuDomainDefFormatBuf API.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainDefFormatInternal (called by qemuDomainDefFormatXMLInternal)
already checks for buffer errors and properly resets the buffer on
failure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1471225
Commit id '99a2d6af2' was a bit too aggressive with determining whether
the provided path was a "physical" cd-rom in order to generate a taint
message due to the possibility of some guest and host trying to control
the tray. For cd-rom guest devices backed to some VIR_STORAGE_TYPE_FILE
storage, this wouldn't be a problem and as such it shouldn't be a problem
for guest devices using some sort of block device on the host such as
iSCSI, LVM, or a Disk pool would present.
So before issuing a taint message, let's check if the provided path of
the VIR_STORAGE_TYPE_BLOCK backed device is a "known" physical cdrom name
by comparing the beginning of the path w/ "/dev/cdrom" and "/dev/sr".
Also since it's possible the provided path could resolve to some /dev/srN
device, let's get that path as well and perform the same check.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since commit v2.2.0-199-g7ce711a30e libvirt stores an updated guest CPU
in domain's live definition and there's no need to update it every time
we want to format the definition. The commit itself tried to address
this in qemuDomainFormatXML, but forgot to fix qemuDomainDefFormatLive.
Not to mention that masking a previously set flag is only acceptable if
the flag was set by a public API user. Internally, libvirt should have
never set the flag in the first place.
https://bugzilla.redhat.com/show_bug.cgi?id=1485022
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When a user requested a domain XML description with
VIR_DOMAIN_XML_UPDATE_CPU flag, libvirt would use the host CPU
definition from host capabilities rather than the one which will
actually be used once the domain is started.
https://bugzilla.redhat.com/show_bug.cgi?id=1481309
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will be used to improve the validation for this type of devices.
The former @def parameter is renamed to @dev, leaving @def for the
virDomainDef (following the style used elsewhere).
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Block job QMP commands with underscores rather than dashes were never
released in upstream qemu, (they were added, but modified in the same
release [1]), but a certain distro managed to backport the version in the
middle.
The change also slightly modified semantics for the abort command, which
made us have a lot of code which was only ever present in certain
downstream distros.
Clean the upstream code from the legacy cruft and support only the
upstream implementations.
[1] See qemu commit v1.0-2176-gdb58f9c060
Reviewed-by: Eric Blake <eblake@redhat.com>
No need to pass a @driver parameter since all that's done is deref
the @cfg especially since the only caller can just pass an already
referenced @cfg.
Also, looks like commit id '0298531b' at one time had a different
name for the API, so I took the liberty of fixing the comments too
since I would already be updating them for the @cfg variable.
In case of real migration (not migrating to file on save, dump etc)
migration info is not complete at time qemu finishes migration
in normal (non postcopy) mode. We need to update disks stats,
downtime info etc. Thus let's not expose this job status as
completed.
To archive this let's set status to 'qemu completed' after
qemu reports migration is finished. It is not visible as complete
job to clients. Cookie code on confirm phase will finally turn
job into completed. As we don't need more things to do when
migrating to file status is set to 'completed' as before
in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When getting job info in case mirror does not reach ready phase
fetch mirror stats from qemu. Otherwise mirror stats are already
saved in current job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of checking stat.status let's set status to migrating
as soon as migrate command is send (waiting for completion
is a good place too).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Setting status to none has little value - getting job status
will not return even elapsed time.
After this patch getting job stats stays correct in a sence
it will not fetch migration stats because it consults
stats.status before doing the fetch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's introduce QEMU_DOMAIN_JOB_STATUS_POSTCOPY state for job.current->status
instead of checking job.current->stats.status. The latter can be changed
when fetching migration statistics. Moving state function from the variable
and leave only store function seems more managable.
This patch removes all state checking usage of stats except for
qemuDomainGetJobStatsInternal. This place will be handled separately.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch simply switches code from using VIR_DOMAIN_JOB_* to
introduced QEMU_DOMAIN_JOB_STATUS_*. Later this gives us freedom
to introduce states for postcopy and mirroring phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Neither @cfg nor (now) @driver is used in the API, so remove them
and mark @opaque as UNUSED.
NB: Commit id 'fa3c558596' dropped the unused @qemuCaps which was the
last consumer of @driver other than @cfg, but even @cfg was never used
even in the original implementation from commit id 'd987f63a'.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We call qemuDomainGetMachineName on domain start. On first
start (after daemon start) pid is 0 and virSystemdGetMachineNameByPID
don't get called. But after domain shutting down pid became -1 so
on next start virSystemdGetMachineNameByPID is called and returned an error.
Error is ignored so it is not critical. But at least on my system
(systemd-219 with extra patches) systemd-machined is crashed on
this request.
This behaviour is triggered by eaf2c9f89.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When recreating folders with namespaces, the directory type was not
being handled at all. It's not special, we probably just didn't know
that that can be used as a volume path as well. The code failed
gracefully, but we want to allow that so that we can use <disk
type='dir'> in domains again.
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Otherwise longer domain names might generate paths that are too long
to be created. This follows what other parts of the code do as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453194
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The reconnect attribute for chardev devices in QEMU is used to
configure the reconnect timeout in seconds. Setting '0' value disables
the reconnect functionality thus we don't allow to set '0' for QEMU.
To disable the reconnect user should use <reconnect enabled='no'/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1254971
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
And into DeviceDefValidate which is the expected place
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the new facility which allows to ignore failures in post parse
callbacks if they are not fatal so that VM configs are not lost if the
emulator binary is missing.
If qemuCaps can't be populated on daemon restart skip certain portions
of the post parse callbacks during config reload and re-run the callback
during VM startup.
This fixes VMs vanishing if the emulator binary was broken or
uninstalled and libvirtd was restarted.
qemuDomainControllerDefPostParse assigns the default USB controller
model when it was not specified by the user. Skip this step if @qemuCaps
is missing so that we don't fill wrong data. This will then be fixes by
re-running the post parse callback.
The domain post parse callback, domain address callback and the domain
device callback (for every single device) would each grab qemuCaps for
the current emulator. This is quite wasteful. Use the new callback to do
this just once.
We're storing the machine name in @priv but free it just in
qemuProcessStop, Therefore this may leak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's possible to have more than one unnamed virtio-serial unix channel.
We need to generate a unique name for each channel. Currently, we use
".../unknown.sock" for all of them. Better practice would be to specify
an explicit target path name; however, in the absence of that, we need
uniqueness in the names we generate internally.
Before the changes we'd get /var/lib/libvirt/qemu/channel/target/unknown.sock
for each instance of
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
Now, we get vioser-00-00-01.sock, vioser-00-00-02.sock, etc.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The original name didn't hint at the fact that PHBs are
a pSeries-specific concept.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that the multi-phb support series is in, work on the TODO at
qemuDomainGetMemLockLimitBytes() to arrive at the correct memlock limit
value.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
pSeries guests will soon be allowed to have multiple
PHBs (pci-root controllers), meaning the current check
on the controller index no longer applies to them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon be allowed to have multiple
PHBs (pci-root controllers), which of course means that
all but one of them will have a non-zero index; hence,
we'll need to relax the current check.
However, right now the check is performed in the conf
module, which is generic rather than tied to the QEMU
driver, and where we don't have information such as the
guest machine type available.
To make this change of behavior possible down the line,
we need to move the check from the XML parser to the
drivers. Luckily, only QEMU and bhyve are using PCI
controllers, so this doesn't result in much duplication.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When checking ABI stability between two domain definitions, we first
make migratable copies of them. However, we also asked for the guest CPU
to be updated, even though the updated CPU is supposed to be already
included in the original definitions. Moreover, if we do this on the
destination host during migration, we're potentially updating the
definition with according to an incompatible host CPU.
While updating the CPU when checking ABI stability doesn't make any
sense, it actually just worked because updating the CPU doesn't do
anything for custom CPUs (only host-model CPUs are affected) and we
updated both definitions in the same way.
Less then a year ago commit v2.3.0-rc1~42 stopped updating the CPU in
the definition we got internally and only the user supplied definition
was updated. However, the same commit started updating host-model CPUs
to custom CPUs which are not affected by the request to update the CPU.
So it still seemed to work right, unless a user upgraded libvirt 2.2.0
to a newer version while there were some domains with host-model CPUs
running on the host. Such domains couldn't be migrated with a user
supplied XML since libvirt would complain:
Target CPU mode custom does not match source host-model
The fix is pretty straightforward, we just need to stop updating the CPU
when checking ABI stability.
https://bugzilla.redhat.com/show_bug.cgi?id=1463957
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Obviously, old gcc-s ale sad when a variable shares the name with
a function. And we do have such variable (added in 4d8a914be0):
@mount. Rename it to @mountpoint so that compiler's happy again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The way we create devices under /dev is highly linux specific.
For instance we do mknod(), mount(), umount(), etc. Some
platforms are even missing some of these functions. Then again,
as declared in qemuDomainNamespaceAvailable(): namespaces are
linux only. Therefore, to avoid obfuscating the code by trying to
make it compile on weird platforms, just provide a non-linux stub
for qemuDomainAttachDeviceMknodRecursive(). At the same time,
qemuDomainAttachDeviceMknodHelper() which actually calls the
non-existent functions is moved under ifdef __linux__ block since
its only caller is in that block too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Currently, the only type of chardev that we create the backend
for in the namespace is type='dev'. This is not enough, other
backends might have files under /dev too. For instance channels
might have a unix socket under /dev (well, bind mounted under
/dev from a different place).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1462060
Just like in the previous commit, when attaching a file based
device which has its source living under /dev (that is not a
device rather than a regular file), calling mknod() is no help.
We need to:
1) bind mount device to some temporary location
2) enter the namespace
3) move the mount point to desired place
4) umount it in the parent namespace from the temporary location
At the same time, the check in qemuDomainNamespaceSetupDisk makes
no longer sense. Therefore remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1462060
When building a qemu namespace we might be dealing with bare
regular files. Files that live under /dev. For instance
/dev/my_awesome_disk:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/dev/my_awesome_disk'/>
<target dev='vdc' bus='virtio'/>
</disk>
# qemu-img create -f qcow2 /dev/my_awesome_disk 10M
So far we were mknod()-ing them which is
obviously wrong. We need to touch the file and bind mount it to
the original:
1) touch /var/run/libvirt/qemu/fedora.dev/my_awesome_disk
2) mount --bind /dev/my_awesome_disk /var/run/libvirt/qemu/fedora.dev/my_awesome_disk
Later, when the new /dev is built and replaces original /dev the
file is going to live at expected location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, we silently assume that file we are creating in the
namespace is either a link or a device (character or block one).
This is not always the case. Therefore instead of doing something
wrong, claim about unsupported file type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, we silently assume that file we are creating in the
namespace is either a link or a device (character or block one).
This is not always the case. Therefore instead of doing something
wrong, claim about unsupported file type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is going to be used on other places, so
instead of copying code we can just call the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459592
In 290a00e41d I've tried to fix the process of building a
qemu namespace when dealing with file mount points. What I
haven't realized then is that we might be dealing not with just
regular files but also special files (like sockets). Indeed, try
the following:
1) socat unix-listen:/tmp/soket stdio
2) touch /dev/socket
3) mount --bind /tmp/socket /dev/socket
4) virsh start anyDomain
Problem with my previous approach is that I wasn't creating the
temporary location (where mount points under /dev are moved) for
anything but directories and regular files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
vcpu properties gathered from query-hotpluggable cpus need to be passed
back to qemu. As qemu did not use the node-id property until now and
libvirt forgot to pass it back properly (it was parsed but not passed
around) we did not honor this.
This patch adds node-id to the structures where it was missing and
passes it around as necessary.
The test data was generated with a VM with following config:
<numa>
<cell id='0' cpus='0,2,4,6' memory='512000' unit='KiB'/>
<cell id='1' cpus='1,3,5,7' memory='512000' unit='KiB'/>
</numa>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452053
In QEMU driver we can use virtlogd as stdio handler for source backend
of char devices if current QEMU is new enough and it's enabled in
qemu.conf. We should store this information while starting a guest
because the config option may change while the guest is running.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
Imagine a FS mounted on /dev/blah/blah2. Our process of creating
suffix for temporary location where all the mounted filesystems
are moved is very simplistic. We want:
/var/run/libvirt/qemu/$domName.$suffix\
were $suffix is just the mount point path stripped of the "/dev/"
prefix. For instance:
/var/run/libvirt/qemu/fedora.mqueue for /dev/mqueue
/var/run/libvirt/qemu/fedora.pts for /dev/pts
and so on. Now if we plug /dev/blah/blah2 into the example we see
some misbehaviour:
/var/run/libvirt/qemu/fedora.blah/blah2
Well, misbehaviour if /dev/blah/blah2 is a file, because in that
case we call virFileTouch() instead of virFileMakePath().
The solution is to replace all the slashes in the suffix with say
dots. That way we don't have to care about nested directories.
IOW, the result we want for given example is:
/var/run/libvirt/qemu/fedora.blah.blah2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
There can be nested mount points. For instance /dev/shm/blah can
be a mount point and /dev/shm too. It doesn't make much sense to
return the former path because callers preserve the latter (and
with that the former too). Therefore prune nested mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
After 290a00e41d we know how to deal with file mount points.
However, when cleaning up the temporary location for preserved
mount points we are still calling rmdir(). This won't fly for
files. We need to call unlink(). Now, since we don't really care
if the cleanup succeeded or not (it's the best effort anyway), we
can call both rmdir() and unlink() without need for
differentiation between files and directories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When making ABI stability checks for an active domain, we need to make
sure we use the same migratable definition which virDomainGetXMLDesc
with the MIGRATABLE flag provides, otherwise the ABI check will fail.
This is implemented in the new qemuDomainCheckABIStability which takes a
domain object and generates the right migratable definition from it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch separates the actual ABI checks from getting migratable defs
in qemuDomainDefCheckABIStability so that we can create another wrapper
which will use different methods to get the migratable defs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The main goal of this function is to enable reusing the parsing code
from qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
Currently, we are querying for vhostuser interface name in post
parse callback. At that time interface might not yet exist.
However, it has to exist when starting domain. Therefore it makes
more sense to query its name at that point. This partially
reverts 57b5e27.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If QEMU is new enough and we have the live updated CPU definition in
either save or migration cookie, we can use it to enforce ABI. The
original guest CPU from domain XML will be stored in private data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since the domain XML saved in a snapshot or saved image uses the
original guest CPU definition but we still want to enforce ABI when
restoring the domain if libvirt and QEMU are new enough, we save the
live updated CPU definition in a save cookie.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The destination host may not be able to start a domain using the live
updated CPU definition because either libvirt or QEMU may not be new
enough. Thus we need to send the original guest CPU definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When starting a domain we update the guest CPU definition to match what
QEMU actually provided (since it is allowed to add or removed some
features unless check='full' is specified). Let's store the original CPU
in domain private data so that we can use it to provide a backward
compatible domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
