In fact keeping the VM around for debugging is a desirable configuration
and actually the implementation has no code as we keep the VM around.
Remove the validation and add a note that it's actually used.
Fixes: b1b85a475fb251b9068b75f629479f5c452f1b43
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
SeaBIOS >= 1.11 has built-in support for outputting to the serial
console when QEMU sets -M graphics=off. Our minimum QEMU version
is 2.11.0, which bundled SeaBIOS 1.11. Thus we have no need to
use '-device sga' anymore.
This change results in a slight layout difference for option ROMs
in memory, however, it does not affect the migration data stream
format on the wire and once migration is complete the target QEMU
memory layout for ROMs matches the source QEMU once again.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BIOS serial console output is currently implemented using the QEMU
'sga' device, but this is going to change in future patches, so the
error message ought to be more generically phrased.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <bios useserial='yes'> config results in use of the '-device sga'
QEMU options. This in turn causes QEMU go load the sgabios.bin option
ROM, which contains x86 machine code. This cannot work on non-x86
arches, thus we should block the bad config.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Setup of a disk with <transient shareBacking='yes'/> option issues a
reset of qemu. In cases when QEMU didn't yet support the 'set-action'
QMP libvirt would in certain cases setup the commandline without
'-no-shutdown' which caused qemu to exit during startup. Forbid this
specific scenario.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'preserve' action.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'rename-restart' action.
At this point the following handling would take place:
'on_reboot' set to 'rename-restart' is ignored on guest-initiated
reboots, the guest simply reboots.
For on_poweroff set to 'rename-restart' the following happens:
guest initiated shutdown -> 'destroy'
libvirt initiated shutdown -> 'reboot'
In addition when 'on_reboot' is 'destroy' in addition to 'on_poweroff'
being 'rename-restart' the guest is able to execute instructions after
issuing a reset before libvirt terminates it. This will be addressed
separately later.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All currently supported qemu versions support all throttling
capabilities. It is unlikely that any of the fields will be removed in
the future and if it will we will need to do specific probing which is
possible via the 'throttle' object which is the replacement for the
legacy way to configure throttling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When SEV is not supported but specified in the domain XML by a user it
should not result in an internal error (VIR_ERR_INTERNAL_ERROR)
therefore switching to XML error (VIR_ERR_CONFIG_UNSUPPORTED).
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding virDomainSecDef for general launch security data
and moving virDomainSEVDef as an element for SEV data.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IOThreads are supported with all 3 currently supported buses which can
have virtio devices (PCI, CCW, MMIO) , so there's no need for this check.
Additionally this check was buggy in the current location as on e.g.
hotplug cases the address may not yet be assigned for the disk and thus
a bogus error would be printed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1970277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_S390 can never be asserted any more, add an explicit
check that will reject the 'virtio-s390' address type and remove the
code which would auto-fill them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The devices virtio-gpu-gl-pci and virtio-vga-gl, aimed to replace the
virgl property, are valid for 3d accerlation as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement this behaviour by skipping the disks on traditional
commandline and hotplug them before resuming CPUs. That allows to use
the support for hotplugging of transient disks which inherently allows
sharing of the backing image as we open it read-only.
This commit implements the validation code to allow it only with buses
supporting hotplug and the hotplug code while starting up the VM.
When we have such disk we need to issue a system-reset so that firmware
tables are regenerated to allow booting from such device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The "machine-loadparm-multiple-disks-nets-s390" case now requires the
QEMU_CAPS_CCW feature to pass validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported QEMU versions and there isn't a
more elegant way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is no longer asserted. Remove the checks related to it and
make the code work properly with QEMU_CAPS_DEVICE_INTEL_IOMMU.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This makes it possible to enable stable NIC device names in most modern
Linux distros.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A VM defined similar to:
...
<features><kvm><hint-dedicated state='on'/></kvm></features>
<cpu mode="host-model"/>
...
is currently invalid, as hint-dedicated is only allowed if cpu mode
is host-passthrough or maximum. This restriction is unnecessary, see
https://bugzilla.redhat.com/show_bug.cgi?id=1857671
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
To make it easier to split out the parsing/formatting of the <teaming>
element into separate functions (so we can more easily add the
<teaming> element to <hostdev>, change its virDomainNetDef so that it
points to a virDomainNetTeamingInfo rather than containing one.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
TPM devices with model='tpm-tis' are only valid with x86 and aarch64
virt machines. Add a check to qemuValidateDomainDeviceDefTPM() to
ensure VIR_DOMAIN_TPM_MODEL_TIS is only used with these architectures.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The "max" model can be treated the same way as "host" model in general.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For hardware virtualization this is functionally identical to the
existing host-passthrough mode so the same caveats apply.
For emulated guest this exposes the maximum featureset supported by
the emulator. Note that despite being emulated this is not guaranteed
to be migration safe, especially if different emulator software versions
are used on each host.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Implements QEMU support for vhost-user-blk together with live
hotplug/unplug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Make the function reusable by other vhost-user based devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time
Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
