In the function at one place we check if def->cpu is NULL prior
to accessing def->cpu->ncells. Then, later in the code,
def->cpu->ncells is accessed directly, without the check. This
makes coverity unhappy, because the first check makes it think
def->cpu can be NULL. However, the function is not called if
def->cpu is NULL. Therefore, remove the first check and hopefully
make coverity cheer again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds support for RDMA protocol in migration URIs.
USAGE: $ virsh migrate --live --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Since libvirt runs QEMU in a pretty restricted environment, several
files needs to be added to cgroup_device_acl (in qemu.conf) for QEMU to
be able to access the host's infiniband hardware. Full documenation of
the feature can be found on QEMU wiki:
http://wiki.qemu.org/Features/RDMALiveMigration
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently we only support TCP protocol for native QEMU migration but
this is going to be changed. Let's make the code more general and remove
hardcoded TCP protocol from several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility with old libvirt we need to support both tcp:host and
tcp://host migration URIs. Let's make the code that parses them a bit
cleaner.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
commit 72f919f558 introduced an user
friendly error message when trying to use IDE disks as readonly.
Do the same thing for the SATA bus.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add a new parameter that will allow to return the XML stored in the save
image for further manipulation and adjust the callers. This option will
be used in later patches.
Commit id '9a2f36ec' added a build conditional of CAP_SYS_RAWIO
in order to determine whether or not a disk definition using rawio
should be allowed on platforms without CAP_SYS_RAWIO. If one was
found, virReportError was used but the code didn't goto cleanup.
This patch adds the goto.
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If the qemu being used doesn't support JSON, then querying for IOThread
data would fail. In that case, ensure the *iothreads is NULL and return 0
as the count of iothreads available.
Currently, build with clang fails with:
CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo
qemu/qemu_command.c:6580:58: error: implicit conversion from enumeration type
'virMemAccess' to different enumeration type 'virTristateSwitch'
[-Werror,-Wenum-conversion]
virTristateSwitch memAccess = def->cpu->cells[i].memAccess;
~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~
1 error generated.
Fix that by using virMemAccess instead of virTristateSwitch.
Commit f05b6a91 added virQEMUDriverConfigPtr argument to the
virQEMUCapsFillDomainCaps function and it uses forward declaration
of virQEMUDriverConfig and virQEMUDriverConfigPtr that casues clang
build to fail:
gmake[3]: Entering directory `/usr/home/novel/code/libvirt/src'
CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo
In file included from qemu/qemu_capabilities.c:43:
In file included from qemu/qemu_hostdev.h:27:
qemu/qemu_conf.h:63:37: error: redefinition of typedef 'virQEMUDriverConfig'
is a C11 feature [-Werror,-Wtypedef-redefinition]
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
qemu/qemu_capabilities.h:328:37: note: previous definition is here
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
Fix that by passing loader and nloader config attributes directly
instead of passing complete config.
Commit f36a94f introduced a double free on all success paths
in qemuSharedDeviceEntryInsert.
Only call qemuSharedDeviceEntryFree on the error path and
set entry to NULL before jumping there if the entry already
is in the hash table.
https://bugzilla.redhat.com/show_bug.cgi?id=1142722
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Live definition was used to look up the disk index while persistent one
was indexed leading to a crash in qemuDomainGetBlockIoTune. Use the
correct def and report a nice error.
Unfortunately it's accessible via read-only connection, though it can
only crash libvirtd in the cases where the guest is hot-plugging disks
without reflecting those changes to the persistent definition. So
avoiding hotplug, or doing hotplug where persistent is always modified
alongside live definition, will avoid the out-of-bounds access.
Introduced in: eca96694a7f992be633d48d5ca03cedc9bbc3c9aa (v0.9.8)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140724
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135396
There are two ways how to tell qemu to use huge pages. The first one
is suitable for domains with NUMA nodes: the path to hugetlbfs mount
is appended to NUMA node definition on the command line. The second
one is suitable for UMA domains: here there's this global '-mem-path'
argument that accepts path to the hugetlbfs mount point. However, the
latter case was not used for all the cases that it should be. For
instance:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
didn't trigger the '-mem-path' so the huge pages - despite being
configured - were not used at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of 136ad4974 it is possible to specify different huge pages per
guest NUMA node. However, there's no check if nodeset specified in
./hugepages/page contains only those guest NUMA nodes that exist.
In other words with current code it is possible to define meaningless
combination:
<memoryBacking>
<hugepages>
<page size='1048576' unit='KiB' nodeset='0,2-3'/>
<page size='2048' unit='KiB' nodeset='1,4'/>
</hugepages>
</memoryBacking>
<vcpu placement='static'>4</vcpu>
<cpu>
<numa>
<cell id='0' cpus='0' memory='1048576'/>
<cell id='1' cpus='1' memory='1048576'/>
<cell id='2' cpus='2' memory='1048576'/>
<cell id='3' cpus='3' memory='1048576'/>
</numa>
</cpu>
Notice the node 4 in <hugepages/>?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.
To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_INTERFACE group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_VCPU group of statistics. To
do so, this patch also extracts a helper to gather the vCPU information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_CPU_TOTAL group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Future patches which will implement more bulk stats groups for QEMU will
need to access the connection object.
To accommodate that, a few changes are needed:
* enrich internal prototype to pass qemu driver object
* add per-group flag to mark if one collector needs monitor access or not
* If at least one collector of the requested stats needs monitor access
we must start a query job for each domain. The specific collectors
will run nested monitor jobs inside that.
* If the job can't be acquired we pass flags to the collector so
specific collectors that need monitor access can be skipped in order
to gather as much data as is possible.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu for IBM Power processor architecture is adding functionality for
supporting multiple 'pseries' machine type versions, each with different
capabilities. This patch is for supporting the same
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b606bbb4 broke reporting of errors when setting of guest time
fails via the guest agent as the return value is not checked and later
overwritten by the return value qemuMonitorRTCResetReinjection();
Fix this by checking the return value before resetting the RTC
reinjection.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142294
If there are no iothreads, then return from qemuProcessDetectIOThreadPIDs
without error; otherwise, the following occurs:
error: Failed to start domain $dom
error: An error occurred, but the cause is unknown
Modify qemuProcessStart() in order to allowing setting affinity to
specific CPU's for IOThreads. The process followed is similar to
that for the vCPU's.
This involves adding a function to fetch the IOThread id's via
qemuMonitorGetIOThreads() and adding them to iothreadpids[] list.
Then making sure all the cgroup data has been properly set up and
finally assigning affinity.
In order to support cpuset setting, introduce qemuSetupCgroupIOThreadsPin
and qemuSetupCgroupForIOThreads to mimic the existing Vcpu API's.
These will support having an 'iotrhreadpin' element in the 'cpuset' in
order to pin named IOThreads to specific CPU's. The IOThread pin names
will follow the IOThread naming scheme starting at 1 (eg "iothread1")
up through an including the def->iothreads value.
