The core of these two functions is very similar and most of it is even
exactly the same. Factor out the core functionality into a separate
function to remove code duplication and make further changes easier.
This is introduced by commit df0b57a95a, which forgot to
add signal handler for SIGHUP.
A simple reproduce method:
1) Create a domain XML under /etc/libvirt/qemu
2) % kill -SIGHUP $(pidof libvirtd)
3) % virsh list --all (the new created domain XML is not listed)
With gcc 4.5.1:
util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]
Then in tests/commandtest.c, the new virPidFile APIs need to be used.
* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.
Remove the current libvirtd pidfile handling code, in favour of
calling out to the new APIs. This ensures libvirtd's pidfile
handling is crashsafe
This also means that the non-root libvirtd instances (for handling
qemu:///session URIs) can now safely use pidfiles without racing
* daemon/libvirtd.c: Switch to use virPidFileAcquire and
virPidFileRelease
In daemons using pidfiles to protect against concurrent
execution there is a possibility that a crash may leave a stale
pidfile on disk, which then prevents later restart of the daemon.
To avoid this problem, introduce a pair of APIs which make
use of virFileLock to ensure crash-safe & race condition-safe
pidfile acquisition & releae
* src/libvirt_private.syms, src/util/virpidfile.c,
src/util/virpidfile.h: Add virPidFileAcquire and virPidFileRelease
In some cases the caller of virPidFileRead might like extra checks
to determine whether the pid just read is really the one they are
expecting. This adds virPidFileReadIfAlive which will check whether
the pid is still alive with kill(0, -1), and (on linux only) will
look at /proc/$PID/path
* libvirt_private.syms, util/virpidfile.c, util/virpidfile.h: Add
virPidFileReadIfValid and virPidFileReadPathIfValid
* network/bridge_driver.c: Use new APIs to check PID validity
The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix
* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
qemu/qemu_process.c: Add virpidfile.h include and adapt for API
renames
Add some simple wrappers around the fcntl() discretionary file
locking capability.
* src/util/util.c, src/util/util.h, src/libvirt_private.syms: Add
virFileLock and virFileUnlock APIs
We forgot to add virDomainUndefineFlags for a couple of hypervisors.
This wires up trivial versions (since neither hypervisor supports
managed save yet, they do not need to support any flags).
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Update caller.
(vboxDomainUndefine): Move guts...
(vboxDomainUndefineFlags): ...to new function.
* src/xenapi/xenapi_driver.c (xenapiDomainUndefine)
(xenapiDomainUndefineFlags): Likewise.
The public API documents that undefine may be used to transition a
running persistent domain into a transient one. Many drivers still
do not support this usage, but virsh shouldn't be getting in the
way of those that do support it.
This also drops a redundant conditional; vshCommandOptString
guaranteed that name was non-NULL.
* tools/virsh.c (cmdUndefine): Allow undefine on active domains;
the drivers may still reject it, but it is a valid API usage.
* tests/undefine (error): Fix the test to match.
Currently only tabs and blanks are used for tokenizing the description,
which breaks when a term is at the end of a line or has () appended to
it.
1. Use also other white space characters such as new-lines and carriage
return for splitting.
2. Remove some common non-word characters from the token before lookup.
Signed-off-by: Philipp Hahn <hahn@univention.de>
* remote.html.in: Remove obsolete notes about internals of the
RPC protocol
* internals/rpc.html.in: Extensive docs on RPC protocol/API
* sitemap.html.in: Add new page
When the description of an entry is too long and needs multiple lines,
all other table cells of the same row are currently vertically aligned
on center. Without row borders or different background colors for
alternating rows this is hard to read.
Change the style-sheet to align the table cells of a row on top.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Down the road, I want to add virDomainSnapshotGetParent, and use
the new API rather than xml scraping; but this virsh command can
be implemented even without the new API.
* tools/virsh.c (cmdSnapshotParent): New command.
* tools/virsh.pod (snapshot-parent): Document it.
Our logic throws off analyzer tools:
ptr var = NULL;
if (flags == 0) flags = live ? _LIVE : _CONFIG;
if (flags & _LIVE) do stuff
if (flags & _CONFIG) var = non-null;
if (flags & _LIVE) do more stuff
else if (flags & _CONFIG) use var
the tools keep thinking that var can still be NULL in the last
if clause, adding the hint shuts them up.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Add a
static analysis hint.
While the first encountered dns host record is being parsed, it's
possible for virNetworkDef::hosts to point to memory that has been
allocated, but virNetworkDef::nhosts to still be 0. If there is a
failure during that time, virNetworkDef::hosts will be leaked.
Although this isn't currently the case for virNetworkDef::txtrecords,
it could become that way through future re-factoring, and it hurts
nothing to restructure the freeing of txtrecord data to match that of
hosts data.
The following XML:
<serial type='udp'>
<source mode='connect' service='9999'/>
</serial>
is accepted by domain_conf.c but maps to the qemu command line:
-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)
qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport
Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
Someone in an IRC channel or an email pointed out a few days ago that
the examples of IPv6 addresses in the libvirt documentation were not
in the officially reserved "documentation" range. This addresses their
concern.
Sometimes, full XML is too much; since most snapshot commands
operate on a snapshot name, there should be an easy way to get
at the current snapshot's name. For example:
virsh snapshot-revert dom `virsh snapshot-current dom --name`
* tools/virsh.c (cmdSnapshotCurrent): Add an option.
* tools/virsh.pod (snapshot-current): Document it.
Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains. Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.
Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.
* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
This should have been done with the rest of the patch for virtual
switch / network device abstraction. If documents the new elements
(and new usage of existing elements) in the <network> XML to support
libvirt networks that use existing host bridges and macvtap direct
connections, as well as the new <portgroup> element.
I noticed some inconsistent use of 'else'.
* src/qemu/qemu_driver.c (qemuCPUCompare)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Match coding conventions.
If a snapshot with the name already exists, virDomainSnapshotAssignDef()
just returns NULL, in which case the snapshot definition is leaked.
Currently this leak is not a big problem, since qemuDomainSnapshotLoad()
is only called once during initial startup of libvirtd.
Signed-off-by: Philipp Hahn <hahn@univention.de>
A previous commit gave the LXC driver the ability to mount
block devices for the container filesystem. Through use of
the loopback device functionality, we can build on this to
support use of plain file images for LXC filesytems.
By setting the LO_FLAGS_AUTOCLEAR flag we can ensure that
the loop device automatically disappears when the container
dies / shuts down
* src/lxc/lxc_container.c: Raise error if we see a file
based filesystem, since it should have been turned into
a loopback device already
* src/lxc/lxc_controller.c: Rewrite any filesystems of
type=file, into type=block, by binding the file image
to a free loop device
Currently the LXC driver can only populate filesystems from
host filesystems, using bind mounts. This patch allows host
block devices to be mounted. It autodetects the filesystem
format at mount time, and adds the block device to the cgroups
ACL. Example usage is
<filesystem type='block' accessmode='passthrough'>
<source dev='/dev/sda1'/>
<target dir='/home'/>
</filesystem>
* src/lxc/lxc_container.c: Mount block device filesystems
* src/lxc/lxc_controller.c: Add block device filesystems
to cgroups ACL
An application container shouldn't get a private /dev. Fix
the regression from 6d37888e6a
* src/lxc/lxc_container.c: Don't mount /dev for app containers
Detected by ccc-analyzer, reported by Alex Jia.
qemuProcessStart always calls qemuProcessWaitForMonitor with a
non-negative position, but qemuProcessAttach always calls with -1.
In the latter case, there is no log file we can scrape, so we
also should not be trying to scrape the logs if the qemu process
died at the very end.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Don't try
to read from log in qemuProcessAttach case.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=713728
When "defining" a new network (or one that exists but isn't currently
active) the new definition is stored in network->def, but for a
network that already exists and is active, the new definition is
stored in network->newDef, and then moved over to network->def as soon
as the network is destroyed.
However, the code that writes the dhcp and dns hosts files used by
dnsmasq was always using network->def for its information, even when
the new data was actually in network->newDef, so the hosts files
always lagged one edit behind the definition.
This patch changes the code to keep the pointer to the new definition
after it's been assigned into the network, and use it directly
(regardless of whether it's stored in network->newDef or network->def)
to construct the hosts files.
Value stored to 'ret' is never read, so remove this dead assignment.
* src/qemu/qemu_monitor_text.c: kill dead assignment.
Signed-off-by: Alex Jia <ajia@redhat.com>
Value stored to 'ret' is never read, in fact, 'cleanup' section will
directly return -1 when function is fail, so remove this dead assignment.
* src/qemu/qemu_process.c: kill dead assignment.
Signed-off-by: Alex Jia <ajia@redhat.com>
When trying to use any SASL authentication for TCP sockets by
setting auth_tls = "sasl" in libvirtd.conf on server side, the
client will hang because of the sasl session relocking other than
dropping the lock when exiting virNetSASLSessionExtKeySize()
* src/rpc/virnetsaslcontext.c: virNetSASLSessionExtKeySize drop the
lock on exit
This patch introduces a internal RPC API "virNetServerClose", which
is standalone with "virNetServerFree". it closes all the socket fds,
and unlinks the unix socket paths, regardless of whether the socket
is still referenced or not.
This is to address regression bug:
https://bugzilla.redhat.com/show_bug.cgi?id=725702
I noticed that with 0.9.4, gnulib ended up replacing pthread_sigmask
on glibc, even though glibc's works perfectly fine. It turns out
to have been an upstream gnulib bug.
* .gnulib: Update to latest, for pthread_sigmask fix.
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.
Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.
Also fix header guard in gnutls_1_0_compat.h.
