This failure was introduced by commit dacee3d, which removed
listenAddr from the unions in virDomainGraphicsDef in favor of putting
it in the address attribute of virDomainGraphicsListenDef.
The domain XML now understands the <listen> subelement of its
<graphics> element (including when listen type='network'), and the
network driver has an internal API that will turn a network name into
an IP address, so the final logical step is to put the glue into the
qemu driver so that when it is starting up a domain, if it finds
<listen type='network' network='xyz'/> in the XML, it will call the
network driver to get an IPv4 address associated with network xyz, and
tell qemu to listen for vnc (or spice) on that address rather than the
default address (localhost).
The motivation for this is that a large installation may want the
guests' VNC servers listening on physical interfaces rather than
localhost, so that users can connect directly from the outside; this
requires sending qemu the appropriate IP address to listen on. But
this address will of course be different for each host, and if a guest
might be migrated around from one host to another, it's important that
the guest's config not have any information embedded in it that is
specific to one particular host. <listen type='network.../> can solve
this problem in the following manner:
1) on each host, define a libvirt network of the same name,
associated with the interface on that host that should be used
for listening (for example, a simple macvtap network: <forward
mode='bridge' dev='eth0'/>, or host bridge network: <forward
mode='bridge'/> <bridge name='br0'/>
2) in the <graphics> element of each guest's domain xml, tell vnc to
listen on the network name used in step 1:
<graphics type='vnc' port='5922'>
<listen type='network'network='example-net'/>
</graphics>
(all the above also applies for graphics type='spice').
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
* tools/virsh.c: fix missing zero value judgement in cmdBlkiotune and correct
vshError information.
when weight is equal to 0, the cmdBlkiotune will not raise any error information
when judge weight value first time, and execute else branch to judge weight
value again, strncpy(temp->field, VIR_DOMAIN_BLKIO_WEIGHT, sizeof(temp->field))
will be not executed for ever. However, if and only if param->field is equal
to VIR_DOMAIN_BLKIO_WEIGHT, underlying qemuDomainSetBlkioParameters function
will check whether weight value is in range [100, 1000].
* how to reproduce?
% virsh blkiotune ${guestname} --weight 0
Signed-off-by: Alex Jia <ajia@redhat.com>
On RHEL 5, with gcc 4.1.2:
rpc/virnetsaslcontext.c: In function 'virNetSASLSessionUpdateBufSize':
rpc/virnetsaslcontext.c:396: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
* src/rpc/virnetsaslcontext.c (virNetSASLSessionUpdateBufSize):
Use a union to work around gcc warning.
qemuMigrationUpdateJobStatus (called in a loop by migration
and save tasks) uses qemuDomainObjEnterMonitorWithDriver;
however, that function ended up starting a nested job without
releasing the driver.
Since no one else is making nested calls, we can inline the
internal functions to properly track driver_locked.
* src/qemu/qemu_domain.h (qemuDomainObjBeginNestedJob)
(qemuDomainObjBeginNestedJobWithDriver)
(qemuDomainObjEndNestedJob): Drop unused prototypes.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal):
Reflect driver lock to nested job.
(qemuDomainObjBeginNestedJob)
(qemuDomainObjBeginNestedJobWithDriver)
(qemuDomainObjEndNestedJob): Drop unused functions.
As written in virStorageFileGetMetadataFromFD decription, caller
must free metadata after use. Qemu driver miss this and therefore
leak metadata which can grow to huge mem leak if somebody query
for blockInfo a lot.
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
must free() the returned path after use.
* how to reproduce?
% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
* actual results:
Detected in valgrind run:
==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
Signed-off-by: Alex Jia <ajia@redhat.com>
The error in getCompressionType will never be reported, change
the errors codes into warning (VIR_WARN("%s", _(foo)); doesn't break
syntax-check rule), and also improve the docs in qemu.conf to tell
user the truth.
Make MIGRATION_OUT use the new helper methods.
This also introduces new protection to migration v3 process: the
migration job is held from Begin to Confirm to avoid changes to a domain
during migration (esp. between Begin and Perform phases). This change is
automatically applied to p2p and tunneled migrations. For normal
migration, this requires support from a client. In other words, if an
old (pre 0.9.4) client starts normal migration of a domain, the domain
will not be protected against changes between Begin and Perform steps.
Without this, a configure built by autoconf 2.59 was broken when
trying to detect which compiler warning flags were supported.
* .gnulib: Update to latest, for warnings.m4 fix.
* bootstrap.conf: Add fclose explicitly, to match recent gnulib
implicit dependency changes.
* src/qemu/qemu_conf.c (includes): Drop unused include.
* src/uml/uml_conf.c (include): Likewise.
Reported by Daniel P. Berrange.
Every DomainNetDef has a bandwidth, as does every portgroup.
Whenever a DomainNetDef of type NETWORK is about to be used, a call is
made to networkAllocateActualDevice(). This function chooses the "best"
bandwidth object and places it in the DomainActualNetDef.
From that point on, whenever some code needs to use the bandwidth data
for the interface, it's retrieved with virDomainNetGetActualBandwidth(),
which will always return the "best" info as determined in the
previous step.
The description of the list command seemed to suggest that it could
take a set of domains as an argument, which is not correct in the
current HEAD. If virsh list is intended to take a list of domains,
then this patch should be NAK'd and a bug opened against virsh list.
Reported by hachi on #virt
v2:
Change language to include transient domains
Osier pointed out that transient domains are not defined, so what I
had originally proposed wasn't quite correct.
When an incoming RPC message is ready for processing,
virNetServerClientDispatchRead()
will invoke the 'dispatchFunc' callback. This is set to
virNetServerDispatchNewMessage
This function puts the message + client in a queue for processing by the thread
pool. The thread pool worker function is
virNetServerHandleJob
The first thing this does is acquire an extra reference on the 'client'.
Unfortunately, between the time the message+client are put on the thread pool
queue, and the time the worker runs, the client object may have had its last
reference removed.
We clearly need to add the reference to the client object before putting the
client on the processing queue
* src/rpc/virnetserverclient.c: Add a reference to the client when
invoking the dispatch function
* src/rpc/virnetserver.c: Don't acquire a reference to the client
when in the worker thread
The cpu bandwidth is applied at the vcpu group level. We should apply it
at the vm group level too, because the vm may do heavy I/O, and it will affect
the other vm.
We apply cpu bandwidth at the vcpu and the vm group level, so we must ensure
that max(child_quota) <= parent_quota when we modify cpu bandwidth.
The virNetSASLContext, virNetSASLSession, virNetTLSContext and
virNetTLSSession classes previously relied in their owners
(virNetClient / virNetServer / virNetServerClient) to provide
locking protection for concurrent usage. When virNetSocket
gained its own locking code, this invalidated the implicit
safety the SASL/TLS modules relied on. Thus we need to give
them all explicit locking of their own via new mutexes.
* src/rpc/virnetsaslcontext.c, src/rpc/virnettlscontext.c: Add
a mutex per object
When setting up a server socket, we must skip EADDRINUSE errors
from bind, since the IPv6 socket bind may have already bound to
the IPv4 socket too. If we don't manage to bind to any sockets
at all though, we should then report the EADDRINUSE error as
normal.
This fixes the case where libvirtd would not exit if some other
program was listening on its TCP/TLS ports.
* src/rpc/virnetsocket.c: Report EADDRINUSE
Rename the existing --current flag to the new name --active,
while adding a new flag --current to expose the new
VIR_DOMAIN_AFFECT_CURRENT flag of virDomainGetVcpusFlags.
For backwards compability, the output does not change (even
though the label "current" no longer matches the spelling of
the option that would trigger that number in isolation), and
we accept "--current --live" as an undocumented synonym for
"--active --live" to avoid breaking any existing clients.
* tools/virsh.c (cmdVcpucount): Add --active flag, and rearrange
existing flag handling to expose VIR_DOMAIN_AFFECT_CURRENT support.
* tools/virsh.pod (vcpucount): Document this.
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT,
so should virDomainGetVcpusFlags.
Unfortunately, the virsh counterpart 'virsh vcpucount' has already
commandeered --current for a different meaning, so teaching virsh
to expose this in the next patch will require a bit of care.
* src/libvirt.c (virDomainGetVcpusFlags): Allow
VIR_DOMAIN_AFFECT_CURRENT.
* src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise.
* src/test/test_driver.c (testDomainGetVcpusFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
