It is only used for debug and error purposes which can be easily
replaced by @placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 working with controllers is a bit more complicated then
with cgroups v1 where the controller had to be mounted.
There are two files, cgroups.controllers and cgroup.subtree_control.
The file cgroup.controllers lists all controllers enabled in the current
cgroup and cgroups.subtree_control, as the name suggest, controls which
controllers are enabled for a subtree of cgroups.
Now the issue here is that the current code doesn't make any difference
if the @parent variable is NULL or not because ../cgroup.subtree_control
will list the same controllers as ./cgroup.controllers.
The whole point of the @parent variable is when we are building the
cgroup topology ourselves without systemd help we need to detect which
controllers are enabled in the parent cgroup in order to enable them for
the current cgroup as well and for that we need to check
cgroup.controllers of the parent group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirtd starts a VM it internally stores a path to the main
cgroup. When we restart libvirtd we should get to the same state.
When we start a VM on host with systemd the cgroup is created for us and
the process is already placed into that cgroup and we detect the path
created by systemd using /proc/$PID/cgroup. After that we create
sub-cgroups and move all threads there.
Once libvirtd is restarted we again detect the cgroup path using
/proc/$PID/cgroup, but in this case we will get a different path because
the main thread was moved to a "emulator" cgroup.
Instead of ignoring the "emulator" directory when validating cgroups
remove it completely when detecting cgroup otherwise cgroups will not
work properly when libvirtd is restarted.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 the file cgroup.procs will never be empty if threading
is enabled as it will always have ID of all processes even if all
threads of the processes are moved to sub-cgroups. If that happens the
file cgroup.threads will be empty.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All other helper processes are moved to cgroup with QEMU emulator
thread as we keep the root VM cgroup without any processes. This
assumption is validated in qemuRestoreCgroupState() which is called
when libvirtd is restarted and reconnected to all running VMs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In both cases priv->cgroup will always be NULL because it is called
before the QEMU process is started and cgroups are configured.
In qemuProcessLaunch() the call order is following:
qemuExtDevicesStart()
...
virCommandRun()
...
qemuSetupCgroup()
where qemuDBusStart() is called from qemuExtDevicesStart() but we
cgroups are created in qemuSetupCgroup().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This should have been included with the upgrade to openwsman 2.6.3.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This places it next to existing related functions.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* use the same section comment in the header and code
* place the items in the same relative location within the .h and .c
* one parameter per line for multiline function definitions
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Once the DIR* in virPCIGetName() was made g_autoptr, the cleanup:
label just had a "return ret;", but the rest of the function was more
compilcated than it needed to be, doing funky things with the value of
ret inside multi-level conditionals and a while loop that might exit
early via a break with ret == 0 or exit early via a goto cleanup with
ret == -1.
It really didn't need to be nearly as complicated. After doing the
trivial replacements of "goto cleanup" with appropriate direct
returns, it became obvious that:
1) the outermost level of the nested conditional at the end of the
function ("if (ret < 0)") was now redundant, since ret is now
*always* < 0 by that point (otherwise the function has returned).
2) by switching the sense of the next level of the conditional (making
it "if (!physPortID)", the "else" (which is now just "return 0;"
becomes the "if", and the new "else" no longer needs to be inside
the conditional.
3) the value of firstEntryName can be moved into *netname with
g_steal_pointer()
Once that is all done, ret is no longer used and can be removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since every single use of DIR* was converted to use g_autoptr, this
function is not currently needed. Even if someone comes up with a
usage for a non-g_autoptr DIR* in the future, they can just use
virDirClose(), since there is no longer a semantic difference between
the two (VIR_DIR_CLOSE() previously had an extra & on the pointer so
that it could be transparently passed as a DIR** to virDirClose(), but
that was removed several commits back.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This use of DIR* was re-using the same function-scope DIR* each time
through a for loop, and due to multiple error gotos in the loop, it
needed to have the scope of the DIR* reduced to just the loop at the
same time as switching to g_autoptr. That's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In order to make a usable g_autoptr(DIR), we need to have a close
function that is a NOP when the pointer is NULL, but takes a simple
DIR*. But virDirClose() (candidate to be the g_autoptr cleanup
function) currently takes a DIR**, not DIR*. It does this so that it
can clear the pointer, thus making it safe to call virDirClose on the
same DIR multiple times.
In the past the clearing of the DIR* was essential in a few places,
but those few places have now been changed, so we can modify
virDirClose() to take a DIR*, and remove the side effect of clearing
the DIR*. This will make it directly usable as the g_autoptr cleanup,
and will mean that this:
{
DIR *dirp = NULL;
blah blah ...
VIR_DIR_CLOSE(dirp)
}
is functionally identical to
{
g_autoptr(DIR) dirp = NULL;
blah blah ...
}
which will make conversion to using g_autoptr mechanical and simple to review.
(Note that virDirClose() will still check for NULL before attempting
to close, so that it can always be safely called, as long as the DIR*
was initialized to NULL (another prerequisite of becoming a g_autoptr
cleanup function)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In all uses of VIR_DIR_CLOSE() except one, the DIR* is never
referenced after closing all the way until it goes out of
scope. virCapabilitiesInitCaches(), however, reuses the same DIR* over
and over in a loop, but due to having many error conditions that
result in a goto out of the loop, it's not well suited to reducing the
scope of the variable until we introduce a g_autoptr cleanup function
for DIR*.
In preparation for doing just that, we need to get rid of the side
effect of VIR_DIR_CLOSE() setting the DIR* to NULL, so in this one
case, let's manually set the DIR* to NULL. Then in an upcoming patch
we can safely remove the side effect from VIR_DIR_CLOSE().
This extra/ugly bit of code is only temporary: once we introduce the
g_autoptr cleanup function for DIR*, we will remove this manual
close/clear completely anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
DIR *dh is being re-used each time through the for loop of this
function, so it must be closed and then re-opened, which means we
can't convert it to g_autoptr. By moving the definition of dh inside
the for loop, we make it possible to trivially convert to g_autoptr
(which will happen in a subsequent patch)
NB: VIR_DIR_CLOSE() is already called at the bottom of the for loop,
so removing the VIR_DIR_CLOSE() at the end of the function is *not*
creating a leak of a DIR*!
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
VIR_DIR_CLOSE(dir) is called in the middle of
virStorageBackendRefreshLocal(), which is okay, but redundant - there
is no reference to dir between that call and the end of the function,
where VIR_DIR_CLOSE() is called again. Remove the extra call in the
middle to simplify the function and make the conversion to g_autoptr
trivial/mechanical.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make the trivial nature of a conversion to g_autoptr (in a
later patch) more obvious.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make it easier to review upcoming patches that use g_autoptr
to auto-close all DIRs.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In v6.6.0-rc1~124 we've introduced a new mechanism for MAC
addresses for ESX: ignore all checks (type='static') that libvirt
or ESX would do (and possibly fail) for specified MAC address.
Accepted values for the @type attribute are "generated" and
"static". But the error message mentions a different attribute.
Fixes 454e5961ab
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1892130
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemu stabilized it's interface and we've switched to the new
design we can re-enable use of 'block-export-add'
This reverts commit b87cfc957f
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu decided to modify the arguments of 'block-export-add' to include an
array of bitmaps rather than a single bitmap.
Since we've added the code prior to qemu setting the interface in stone
and thus it will be changed incompatibly and we already have tests for
the new interface we need to update the code and qemu capabilities data
at the same time.
Use a array of bitmaps as the 'bitmaps' argument instead of 'bitmap' and
bump qemu capabilities for the upcoming 5.2.0 release to
v5.1.0-2827-g2c6605389c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Simulate that the device is a cdrom when the path equals to /dev/cdrom
to provide testing for the 'host_cdrom' backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'parent' axis to check whether the parent is a div with
class='section' rather than looking for 'toc-backref' anchor to see
whether to generate one of the headerlink alternatives. Both hare
docutils-specific thus apply to docs generated from RST documents.
This adds the links for pages generated from RST documents which don't
have a table of contents (and thus lack the 'toc-backref' anchors) and
thus fixes pages such as hacking.html and news.html to have reasonable
links which can be shared.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is just a warning, but because we're invoking rst2html5 with
--strict, it will fail at encountering a single minor issue.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 53aec799fa introduced the function udevGetVDPACharDev(),
which scans a directory using virDirOpenIfExists() and
virDirRead(). It unfortunately forgets to close the DIR* when it is
finished with it. This patch fixes that omission.
Fixes: 53aec799fa
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
GLibC has a really complicated way of dealing with the 'stat' function
historically, which means our mocks in turn have to look at four
different possible functions to replace, stat, stat64, __xstat,
__xstat64.
In Fedora 33 and earlier:
- libvirt.so links to __xstat64
- libc.so library exports stat, stat64, __xstat, __xstat64
- sys/stat.h header exposes stat and __xstat
In Fedora 34 rawhide:
- libvirt.so links to stat64
- libc.so library exports stat, stat64, __xstat, __xstat64
- sys/stat.h header exposes stat
Historically we only looked at the exported symbols from libc.so to
decide which to mock.
In F34 though we must not consider __xstat / __xstat64 though because
they only existance for binary compatibility. Newly built binaries
won't reference them.
Thus we must introduce a header file check into our logic for deciding
which symbol to mock. We must ignore the __xstat / __xstat64 symbols
if they don't appear in the sys/stat.h header, even if they appear
in libc.so
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The %meson macro sets "--auto-features=enabled", thus any feature in the
RPM which has a "with_XXX" condition, needs to explicitly pass a
"-DXXX=state" arg to %meson to override the auto features setting.
The with_libssh and with_libssh2 conditions were not exposed to meson,
so if either was set disabled, then meson would fail the build if the
-devel packages were not found.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
