https://bugzilla.redhat.com/show_bug.cgi?id=1277781
The virStoragePoolFCRefreshThread had passed a pointer to the pool obj
in the virStoragePoolFCRefreshInfoPtr; however, we cannot assume that
the pool exists still since we don't keep the pool lock throughout
the duration of the thread.
Therefore, instead of passing the pool obj pointer, pass the UUID of
the pool and perform a lookup. If found, then we can perform the
refresh using the locked pool obj pointer; otherwise, we just exit
the thread since the pool is now gone.
Logging current async job while in BeginJob is useful, but the async job
we want to start is even more interesting.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
It's just a copy&paste of qemuxml2argv test anyway. We can test most of
them (except for qemuxmlns-qemu-ns-domain.xml which fails to validate
against our schema) by qemuxml2argv test.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Fixes several style issues and removes "DEF" (what is it supposed to
mean anyway?) from debug messages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship. Reorder the controllers
in XML in to place the master controller before its companions. This is
required by QEMU to not fail with error message:
error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Just straight-forward patch.
Use reference counting for privdom as stats internally could drop domain lock.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The previous commit
commit 4e8993a250
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Nov 9 16:20:08 2015 +0000
qemu: assume various QEMU 0.10 features are always available
Added broken handling of -sdl. Instead of duplicating existing
SDL handling code, just ensure it is invoked in the right
scenarios.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU argv -> virDomainDef conversion code was not handling
-drive arguments using the floppy bus. This caused them to be
added as hard disks instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.11.0 the 'info chardev' monitor command can be
used to report on allocated chardev paths, so we can drop
support for parsing QEMU stderr to locate the PTY paths.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kQEMU accelerator was deleted in QEMU 0.12, so we no
longer need to support it in the QEMU driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If mlock is required either due to use of VFIO hostdevs or due to the
fact that it's enabled it needs to be tweaked prior to adding new memory
or after removing a module. Add a helper to determine when it's
necessary and reuse it both on hotplug and hotunplug.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273491
Back in
commit bd6c46fa0c
Author: Juerg Haefliger <juerg.haefliger@hp.com>
Date: Mon Jan 31 06:42:57 2011 -0500
tests: handle backspace-newline pairs in test input files
all the test argv files were line wrapped so that the args
were less than 80 characters.
The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.
This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.
This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use virNetDevSetupControl instead of open coding using socket(AF_LOCAL...)
and clearing virIfreq.
By using virNetDevSetupControl, the socket is then opened using
AF_PACKET which requires being privileged (effectively root) in
order to complete successfully. Since that's now a requirement,
then the ioctl(SIOCETHTOOL) should not fail with EPERM, thus it
is removed from the filtered listed of failure codes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the SIOCETHTOOL ioctl only works for privileged daemons, if called
when not root, then virNetDevGetFeatures will VIR_DEBUG a message and
return 0 as if the functions were not available for the architecture.
This effectively returns an empty bitmap indicating no features available.
Introduced by commit id 'c9027d8f4'
Signed-off-by: John Ferlan <jferlan@redhat.com>
In commit id 'c9027d8f4' when updating the posted patch to generate
a bitmap instead of an array of named feature bits, adjustment of
the args was missed
Recently reverted commit id '6f2a0198' showed a need to add extra
comments when dealing with filtering of potential "non-issues".
Scanning through upstream patch postings indicates early on the
reasons for the filtering of specific ioctl failures were provided;
however, when converted from causing an error to VIR_DEBUG's the
reasons were missing. A future read/change of the code incorrectly
assumed they could or should be removed.
This reverts commit 6f2a0198e9.
This commit removed error reporting from virNetDevSendEthtoolIoctl
pushing responsibility onto the callers. This is wrong, however,
since virNetDevSendEthtoolIoctl calls virNetDevSetupControl
which can still report errors. So as a result virNetDevSendEthtoolIoctl
may or may not report errors depending on which bit of it fails, and as
a result callers now overwrite some errors.
It also introduced a regression causing unprivileged libvirtd to
spew error messages to the console due to inability to query the
NIC features, an error which was previously ignored.
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
Looking back at the original posting I see no explanation of why
thsi refactoring was needed, so reverting the clearly broken
error reporting logic looks like the best option.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code reported that a migration flag is unsupported but didn't jump
to the error label. Probably an oversight in commit f88af9dc that
introduced the flag checking.
Since the flag was not enabled when 'eating' the migration cookie,
libvirt reported a bogus error when memory hotplug was enabled:
unsupported migration cookie feature memory-hotplug
The error was ignored though due to a bug in the code so it slipped
through testing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278404
Commit id '0f7436ca' added virNetDevWaitDadFinish using ATTRIBUTE_NONNULL
for both arguments, although one is a non-null argument. A Coverity build
balks at that.
Rather than "if (virNetDevFeatureAvailable(ifname, &cmd))" change the
success criteria to "if (virNetDevFeatureAvailable(ifname, &cmd) == 1)".
The called helper returns -1 on failure, 0 on not found, and 1 on found.
Thus a failure was setting bits.
Introduced by commit ac3ed20 which changed the helper's return
values without adjusting its callers
Signed-off-by: John Ferlan <jferlan@redhat.com>
