None of the things testUpdateQEMUCaps adjusts are applicable
for tests that use the DO_TEST_CAPS macros, i.e.
real QEMU capabilities parsed from the XML files:
The architecture must be chosen before we even open the caps
file, CPU models are already present and the expensive HostModel
computation was already done in virQEMUCapsLoadCache.
Introduce FLAG_REAL_CAPS and skip the whole testUpdateQEMUCaps
function for DO_TEST_CAPS.
This speeds up the test by 25 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that the function is only run if requested by
the FLAG_STEAL_VM flag, we know that missing data
is an error, not a request to skip the test.
The existence of the output file is now checked by
virTestCompareToFile, which allows usage of
the VIR_TEST_REGENERATE_OUTPUT=1 env variable
to generate new test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the recently introduced flag as a witness.
This reduces the apparent number of test cases
to the real number of test cases.
Note that this does not suffer from the same problem
as commit 70255fa was fixing, because the condition
for running virTestRun does not depend on results
of previous tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use this macro to indicate the intention to also
run the XML->startup XML test.
It sets the newly introduced FLAG_STEAL_VM flag,
which is the new witness for the XML->argv test
to leave the VM object behind.
This will allow us to report proper errors in
XML->startup tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 82327038 moved a couple of checks out of the XML parser
into the domain validation; however, those checks seem to be more
useful as hypervisor specific checks rather than the more general
domain conf checks (nothing in the docs indicate a specific error).
Fortunately only QEMU was processing the memoryBacking, thus
add the changes to qemuDomainDefValidateMemory and change the
code a bit to make usage of the similar deref to def->mem and
the mem->nhugepages filter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit bc6d3121a was far too terse when describing the new
elements, attributes, and allow values. Provide a few more
words to help describe.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We require QEMU 1.5.0 these days, so checking for versions
older than that is pointless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by commit <af204232>.
Made redundant by commit 1e9a083 which switched to using
qemuProcessCreatePretendCmd, where capabilities are filtered
in qemuProcessInit after being fetched from the cache.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 0bdb704 renamed the corresponding xml->argv tests,
but due to the optimistic nature of xml->startup xml testing,
this test was quietly skipped.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1613737
When processing the inputvol for encryption, we need to handle
the case where the inputvol is encrypted. This then allows for
the encrypted inputvol to be used either for an output encrypted
volume or an output volume of some XML provided type.
Add tests to show the various conversion options when either input
or output is encrypted. This includes when both are encrypted.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39cef12a9 altered/fixed the inputvol processing to create
a multistep process when using an inputvol to create an encrypted
output volume; however, it unnecessarily assumed/restricted the
inputvol to be of 'raw' format only.
Modify the processing code to allow the inputvol format to be checked
and used in order to create the encrypted volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
There's really no need for it to be there since it's only ever
used inside virStorageBackendCreateQemuImgCmdFromVol
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we are checking if the mount namespace is enabled
at two places: one is at the beginning of exported function (e.g.
qemuDomainNamespaceSetupDisk()) and the other is at the beginning
of qemuDomainNamespaceMknodPaths() which is called from the
former function anyway. Then we have some other functions which
rely on the later check solely.
In order to compensate for possibly needless function call,
qemuDomainNamespaceMknodPaths() returns early if @npaths is zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch simplifies virNetDevBridgeCreate and virNetDevMacVLanCreate
functions by making use of the virNetlinkNewLink helper.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch adds wrapper macros around nla_nest_[start|end] and nla_put,
thus getting rid of some redundancy and making virNetlinkNewLink more
readable.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch introduces virNetlinkNewLink helper which wraps the common
libnl/netlink code to create a new link.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
It is possible the incoming VM is not fully started when the finish
phase of migration is executed. In libxlDomainMigrationDstFinish,
wait for the thread receiving the VM to complete before executing
finish phase tasks.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The libxlDomainMigrationDst* functions are a bit flawed in their
handling of modify jobs. A job begins when the destination host
begins receiving the incoming VM and ends after the VM is started.
The finish phase contains another BeginJob/EndJob sequence.
This patch changes the logic to begin a job for the incoming VM
in the prepare phase and end the job in the finish phase.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The libxlDomainMigrationSrc* functions are a bit flawed in their
handling of modify jobs. A job begins at the start of the begin
phase but ends before the phase completes. No job is running for
the remaining phases of migration on the source host.
Change the logic to keep the job running after a successful begin
phase, and end the job in the confirm phase. The job must also end
in the perform phase in the case of error since confirm phase would
not be executed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
libxlDoMigrateSrcP2P() performs all phases of the migration
protocol for peer-to-peer migration. Unfortunately the logic
was a bit flawed since it is possible to skip the confirm
phase after a successfull begin and prepare phase. Fix the
logic to always call the confirm phase after a successful begin
and perform. Skip the confirm phase if begin or perform fail.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If for any reason the restore of a VM fails on the destination host
in a migration operation, the VM is removed (if not persistent) from
the virDomainObjList, meaning it is no longer available for additional
cleanup or processing in the finish phase. Defer removing the VM from
the virDomainObjList until the finish phase, which already contains
logic to remove the VM.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39015a6f3 modified the test to be more reliable/realistic,
but without checking the return status of virEventRunDefaultImpl
it's possible that the test could run infinitely.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 5b3492fadb moved qemuAgentCheckError calls into
qemuAgentCommand for various reasons; however, subsequent
commit 0977b8aa0 adding a new command made call again
So let's just remove the duplicitous call from
qemuAgentGetInterfaces.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 5b3492fadb moved qemuAgentCheckError calls into
qemuAgentCommand for various reasons; however, subsequent
commit b1aa91e14 restored the call. So let's just remove
the duplicitous call from qemuAgentSetVCPUsCommand.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
All backingStore XML definitions have a XML tag with the timestamp. This
timestamp is not defined insinde RNG volume storage schema and it is
causing some problems to validate and check volume XMLs.
https://bugzilla.redhat.com/show_bug.cgi?id=1594266
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When libvirtd is started, initialize domain objects state with its real
state, not only RUNNING/SHUTOFF.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Replace the long dead 'xenner' with 'xenfv'.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
